I tried finding someone with my particular problem but I couldn't so I apologize in advance if this has been posted before.
I tried out MIUI V5 today and I cannot restore back to my SC2.9 Voodoo.
When it boots everything and it's brother force closes over and over again.
I noticed that this is a problem people get when trying to restore back to a NON Voodoo rom.
But as far as I can tell the MIUI v5 runs on a Voodoo kernel and I was trying to restore back to a Voodoo rom.
Any help is greatly appreciated.
finakechi said:
I tried finding someone with my particular problem but I couldn't so I apologize in advance if this has been posted before.
I tried out MIUI V5 today and I cannot restore back to my SC2.9 Voodoo.
When it boots everything and it's brother force closes over and over again.
I noticed that this is a problem people get when trying to restore back to a NON Voodoo rom.
But as far as I can tell the MIUI v5 runs on a Voodoo kernel and I was trying to restore back to a Voodoo rom.
Any help is greatly appreciated.
Click to expand...
Click to collapse
What is the status of your phone at this moment? is it still in FC hell or did you go back to MIUI without FC?
MIUI does indeed have a voodoo kernel. Make sure the super clean rom you are flashing IS INDEED VOODOO. are you flashing a nandroid backup to restore to SC 2.9? Nandroid backups ignore voodoo from what i vaguely remember (I never use nandroid backup, maybe im wrong), so maybe that is your problem.
However if you are 100% sure your SC rom is voodoo and is not being flashed through nandroid, your problem is probably that you need to wipe data/cache/dalvik-cache before you flash superclean.
I was restoring a backup, which I am assuming was that problem. I just wiped and installed. *sigh* Thank you though
Related
I am unhappy with ji6, my gps and compass no longer work and i've had nothing but problems since the update. also the call waiting dial screen lag sucks. I would like to go back to my previous rom which was basically stock rooted with ji2 gps fix and accurate battery mod. I have this saved as a backup, but I am afraid to flash it. When I flashed the new ota update it bricked my phone. I was unble to load my previous backup through clockwork recovery. I had to completely wipe my data and start over. any advice on the safety of trying to flash back to my backup rom, will it conflict with the ji6 framework?
Thanks
There should be no issues at all. I assume you still have the stock kernel too... if you had an oc kernel I would go back to stock first.
just go to rom manager and click on restore, then select your old backup... should take you to cwr and reboot when done.
My first thought was to download a custom rom. I just flashed bionix 1.7 and it seems much better than stock JI6.
I would really urge doing that...
yeah, maybe i'll try bionix first, It's just that I was really happy with the way it ran before this stupid update.
I also was fond of my setup before the update. Bionix made it better again. Hope you like it, worst case go back to stock.
I will say I would make sure you can revert to stock from bionix. I have seen a number of posts with issues, but that may be from people who had the oc kernel? I can't say with certainty.
Same here, i flashed bionix (first time using bionix) I flashed bionic 1.7 w ji2 modem oc/uv no voodoo and this thing flies! Gps is fine, navigation is usable.
s15274n said:
There should be no issues at all. I assume you still have the stock kernel too... if you had an oc kernel I would go back to stock first.
just go to rom manager and click on restore, then select your old backup... should take you to cwr and reboot when done.
My first thought was to download a custom rom. I just flashed bionix 1.7 and it seems much better than stock JI6.
I would really urge doing that...
Click to expand...
Click to collapse
I tried flashing back to my backup...(stock, rooted with bat mod and ji2 gps fix) and it got stuck in the vibrant startup screen, same as when I ran the ota. I guess my previous setup is no longer an option. Before I try another rom and have to redo all of settings and apps again, I would like to try to at least get the gps working on the ota ji6. Any advice on how to do that would be appreciated. So far I have tried all of the things I was able to find in other threads...deleted gps data, made sure lbstest settings are stock, turned off wireless, etc. I still get no locks at all.
Is bionix really that good? I'm considering it. I'm on my stock rom, stock kernel.
I think i'm going to try it out.
Earlier I rooted my phone and flashed it with Bionix Fusion. All went well and it was working just fine. Although after looking through the new rom I remembered I forgot to save my contacts.... I followed the instructions on installing bionix and I created a nandroid backup. Somebody who similarly forgot to save his contacts said to restore the backup sync the contacts to google and then flash the rom over again.
My issue is that I tried to flash my backup and now its been stuck on the Vibrant screen for the past 10 minutes. What went wrong?
please help and ty for your time
well because I couldnt get the nandroid backup to restore correctly I ended up just going back and flashing the bionix fusion rom again and its booting up just fine. Unfortunately I feel that I just lost all my contacts. Anybody have any ideas? Did my nandroid backup just get corrupt somehow? Is there anyways i can somehow get my contacts from the backup?
Whoever posted that must have meant that you should make a backup before flashing any rom. If yiu did that, you could have went back to that backup with all you contacts intact. Its too late now, hopefully google synced most of your contacts.
Sent from my SGH-T959
If you are running Voodoo lagfix, you have to disable the lagfix BEFORE restoring
i did do the backup before flashing. But i guess it just got screwed up somehow. I've never used any lagfixes either
Which version did you flash? I'm going to guess you used one that did not have a stock kernel (JAC/KK)... you would have to flash the stock kernel before restoring a nandroid backup from JI6 or JFD since IT has a stock kernel. The nandroid does not replace the kernel, hence why it would hang at the Vibrant screen.
s15274n said:
Which version did you flash? I'm going to guess you used one that did not have a stock kernel (JAC/KK)... you would have to flash the stock kernel before restoring a nandroid backup from JI6 or JFD since IT has a stock kernel. The nandroid does not replace the kernel, hence why it would hang at the Vibrant screen.
Click to expand...
Click to collapse
Do you mean oden when you say "flash the stock kernel"?
So i'm pretty noob with all this stuff but i finally decided to try flashing my phone and, in the end, ended up with a "bricked" (or the extent a vibrant can be bricked) phone. Thanks in advance for the advice.
what i did
I followed the flashing guide in the sticky post "** GUIDE - TIPS - TRICKS ** Last Update 12/03/10 ** READ BEFORE ASKING" and everything worked great. I downloaded Rom manager, made a nandroid backup of my stock rom, flashed it with bionix fusion and everything worked great. I didn't do the titanium backup and there was an app that i needed to use the next day so on the way to work, i decided to restore back to the stock thinking that i could go back for the day, use the apps that i needed and when i got home got home, back up my apps with titanium back up and restore again back to the bionix fusion. So i did that. I went to rom manager and I first backed up my bionix fusion rom and then tried to recover my stock rom. When the phone restarted, it didn't go past the vibrant/samsung screen.
The question...
what went wrong? based on some reading i think it has something to do with the kernel but i'm not really sure.
but the real question is, how do i avoid from this happening again? did i do the recovery wrong? what's the best way to unbrick my phone back to stock without losing any data on the phone. is it possible????
at this point, i can go into download mode. what should be my next move?
Thank you again if you can provide any insight.
*edit*
So looking at some posts, I looks like I need to flash the stock kernel. can anyone tell me how to flash just the kernel using odin? I've never used it and I can't seem to find anything on flashing just the kernel. Thank you.
Problem SOLVED!
ok. not completely solved T_T.
What i've done.
I've flashed back to stock vibrant firmware and that works fine. When i try to restore my nandroid backup, and it reboots, I get stuck back to the same place i was. I made two nandroid backups and tried them both but neither of them work. am i doing it wrong? I have even re-rooted my vibrant and downloaded rom manager again and tried it through there and still get the problem. have tried it about 4 times now with no luck.
Again, any help is appreciated.
Nandroid doesnt replace the kernal
Sent from my SGH-T959 using XDA App
Exactly, nandroid doesn't replace the kernel. If you want to run a nandroid restore, you have to either flash the rom the nandroid was created on, then restore (safest imho), or flash a compatible kernel for the rom from which your nandroid was created, then run your nandroid restore.
Sent from my Vibrant running Macnut R13 w/JK6 Modem and Black Froyo
Pretty sure this was in the sticky too
I had zero problems when rooting and flashing my G1, but now with my Vibrant I am not sure what I did.
A few excellent stickies at the top but I seem to not be making any progress.
Here are the steps I took.
I had a stock Vibrant running 2.1
I downloaded ROM Manager, installed clockwork mod.
Did a backup of my current system ( was I supposed to do a clockwork AND nandroid?)
Downloaded and successfully installed a ROM called Blackhole 1.0
it runs ok but didn't give me the option to switch from 3G to EDGE data, and then I couldn't get internet access at all so i decided to restore my original stock vibrant system.
So I rebooted into recovery, selected restore (my phone won't go into recovery anymore for some reason) and waited, it took a while, then I rebooted (forgot to wipe), but it just got stuck on the Vibrant screen. So I booted into recovery mode again and wiped just user data not cache and rebooted, same thing stuck at Vibrant.
Now i keep hearing about something called ODIN, what I can tell it is some kind of flasher program for ROMS, nobody seems to give any kind of link or anything, is it greymarket or something?
So where am I now? I think the excellent noob guide needs to be updated a bit more.
My phone can get into download mode (whatever it is for i don't know) but it won't get into recovery mode anymore.
Everything you need is here: http://forum.xda-developers.com/showthread.php?t=771111
i think what happened to you is you flashed a 2.2 ROM then tried to revert back to 2.1 without doing the proper downgrading steps i.e. you did not flash a 2.1 kernel first.
but since you can get to download mode.. just flash stock JFD or JI6 through ODIN and you should be good.
good luck
Once you get back to stock don't give up on the 2.2 toms. Try axura or nero. They might have a few minor bugs but its way better then stock 2.1.
Powered by Axura with a dash of Voodoo
I have done the samething as you, coming from a nexus one it seemed easier to flash roms without worrying about downgrading kernels or what not. Recently I was on Nero froyo and flashed to a different rom, and tried to revert back but ended up stuck at the vibrant screen. Think it has something to do with voodoo lag.
Anyways I had to use Odin with the no brick froyo off ebproductions. Ran that and uploaded clockwork, reinstalled voodoo lag fix and was able to nandroid back to my Nero set up. Somewhat of a pain but once you've done it, no need to worry about bricking
xtone said:
Everything you need is here: http://forum.xda-developers.com/showthread.php?t=771111
i think what happened to you is you flashed a 2.2 ROM then tried to revert back to 2.1 without doing the proper downgrading steps i.e. you did not flash a 2.1 kernel first.
but since you can get to download mode.. just flash stock JFD or JI6 through ODIN and you should be good.
good luck
Click to expand...
Click to collapse
So the steps that are in this page?
http://forum.xda-developers.com/showthread.php?t=734475
GreggoryD502 said:
Once you get back to stock don't give up on the 2.2 toms. Try axura or nero. They might have a few minor bugs but its way better then stock 2.1.
Powered by Axura with a dash of Voodoo
Click to expand...
Click to collapse
Well as long as I can use Odin if I f-up royally like above then I might give it a shot.
Need to read about downgrading kernals or whatever. Might just wait for Cyanogen 6.1
Just so you know, the backup utility in Rom Manager (clockwork) is really just shortcut to a nandroid backup.
The way I have things set up for backups, and this is just for my personal convenience, is as follows...
I have a stock JFD ODIN rom to flash in case anything goes wrong. (A lot of people here will tell you to flash this whenever flashing a new rom. It is safer, and cleaner to do it this way, but not absolutely necessary)
I make a nandroid of my last stable rom (I only keep one at a time cause the files are huge) and keep a backup of that on my PC.
I backup all my apps and a few other things (call logs, bookmarks, sms) through Titanium backup. If you get the pro version, you can load it up after flashing a new rom and have it automatically restore all your apps in one click (system settings can be dangerous to restore when going from rom to rom, so be careful with those.) I also keep a backup of this on my PC.
I will also occasionally backup both of the sd cards to the PC.
Maybe overkill, but you probably wont ever lose anything forever.
thegreatcity said:
Just so you know, the backup utility in Rom Manager (clockwork) is really just shortcut to a nandroid backup.
The way I have things set up for backups, and this is just for my personal convenience, is as follows...
I have a stock JFD ODIN rom to flash in case anything goes wrong. (A lot of people here will tell you to flash this whenever flashing a new rom. It is safer, and cleaner to do it this way, but not absolutely necessary)
I make a nandroid of my last stable rom (I only keep one at a time cause the files are huge) and keep a backup of that on my PC.
I backup all my apps and a few other things (call logs, bookmarks, sms) through Titanium backup. If you get the pro version, you can load it up after flashing a new rom and have it automatically restore all your apps in one click (system settings can be dangerous to restore when going from rom to rom, so be careful with those.) I also keep a backup of this on my PC.
I will also occasionally backup both of the sd cards to the PC.
Maybe overkill, but you probably wont ever lose anything forever.
Click to expand...
Click to collapse
OK I will just do the long way from now on. I use this phone on AT&T, I was worried that I flushed $500 down the toilet but ever since i modded my first phone way back in the day i've been addicted.
Running Odin and my phone is in download mode, about to flash this b**ch.
wish me luck.
I flashed Odin on my phone to revert to stock. Re-Rooted it but now I can't flash Clockworkmod. Please help D:
use the update.zip posted here. You want B.
Hello guys. I currently have Eugene Gingerbread Clone R2 Rom with JL4 Voodoo Lag Fix on my Vibrant.
I want to try other roms for fun. I have some apps and my contacts and stuff backed up and also the entire rom itself. i also have the Stock (Rooted) Backed up as well. My question is how do i go about going back to the "Stock Rooted" safely without using the odin program.
Born2rade said:
Hello guys. I currently have Eugene Gingerbread Clone R2 Rom with JL4 Voodoo Lag Fix on my Vibrant.
I want to try other roms for fun. I have some apps and my contacts and stuff backed up and also the entire rom itself. i also have the Stock (Rooted) Backed up as well. My question is how do i go about going back to the "Stock Rooted" safely without using the odin program.
Click to expand...
Click to collapse
Well, assuming you have ALL of your apps and data and contacts and such backed up with Titanium Pro (make sure, you don't want to lose this stuff!), just reboot into clockwork recovery.
NEXT DISABLE VOODOO OR DIE.
I'm also assuming you made a backup of your "stock rooted rom" with Clockwork Mod Recovery? Now, just reboot into that green clockwork recovery and go to nandroid or backup and restore and click RESTORE.
Yes i have my stock rooted backed up and also my gingerbread rom backed up as well and also some of the important apps and my contacts backed up.
I will give it a try now.
I don't think it worked lol. Screen shows "Searching"
Sweep screen to unlock but screen is black and i cannot do anything.
cannot seem to get back to recovery either
Bob forgot a very important step, flashing a 2.1 kernal...
Best way out is to just flash another Froyo rom through clockwork since you don't want to mess with Odin.
I recommend Axura 2.2.5.7 as well as Nero V3. Go get those and see what you think.
*Edit* just saw your post 1min before mine. You may be using Odin after all.
Ok Thx. Makes sense lol
Nah i only use Rom Manager.
Ok i'm back to my Gingerclone.. I'm going to find Eclair 2.1 kernel, i assume thats the one i need to get and yes i will make sure to disable voodoo before i flash the 2.1 kernel .
Thx.
Born2rade said:
Ok i'm back to my Gingerclone.. I'm going to find Eclair 2.1 kernel, i assume thats the one i need to get and yes i will make sure to disable voodoo before i flash the 2.1 kernel .
Thx.
Click to expand...
Click to collapse
If you just want to flash other roms, you don't have to return to 2.1 IMO.
Just backup everything (Titanium/Nand/Launcher Pro if used), then clear data and cache in clockwork. After that go to install zip from SD and select the new Rom which should be sitting on your internal 16g memory and let it do it's thing.
Ok well i tried other roms. I tried Nero V3, That one was bad, internet was uber slow and Gps doesn't work.
I tried Axura 2.2.5.7, Worked very well except Gps also does not work.
Right now i'm going to stick with my Gingerbread R2 as for everything works extremely well.