When the term 'flashing' is used it seems to mean 2 different thing. (1. using flashtool and connecting you phone via usb 2. using xrecovery.)
I have always had a hard time getting my computer to recognized my phone. sometime it is able to connect and i'm able to mount the sd card but usually i get an error. when i try to to into boot mode on my phone (back button + on button) the phone seems ready, but my computer does nothing.
What I'm trying to do is put a new kernal, baseband, and the dual touch on my phone. I'm sure this sounds like a rediculious noob thing to ask..
I was looking at the FTF file for flashtool, it appears to be basically a zip file. when people refer to flashing sometimes they are talking about using a .zip in xrecovery. i tried changing the extension to .zip and putting it on my sd card and installing from xrecovery.
anyway, if there is a simple answer i would love to know what it is.
p.s. i'm sure this is extremely noob, but will updating the radio affect the gps performance? seeing as though gps, wifi, 3g, bluetooth, etc are all radio functions.
currently running CM 7
Please take the time to read. The ftf file is to be flashed onto your phone with the flashtool which will give you dual touch, then you root and install xrecovery which allows you to flash custom roms. Start by reading the flashtool thread it flashes the SE FWs and basebands which you need setup to use the custom roms.
Sent from my X10i using XDA App
Related
I am completely new to all this but I install some custom roms on my x10 but so far every rom ive installed either doesnt see my sd card or gives me service but no 3g or no service at all. Ive read around and people are saying to flash the rom or something but I have no idea...please help
Hey man,
What have you updated to?
I have the same issue on my phone, ever since i've tried new roms its either been on and off or completely not working.
Theres baseband which i believe is the main basis for the rom, so without the right baseband the rom wont work as it should. Some roms come with the correct baseband. You need to put the .zip rom onto your SD card.
First flash with the right baseband then install Xrecovery. Reboot phone, once it vibrates keep pressing down on the volume control and install custom zip. It should work from there, but so far I haven't had it work for the roms I've tried ;(
ok thanks. How do I flash the rom with the right baseband? I have no idea
I finaly got it to work! I did a reinstall with seus and a factory reset then flashed a generic firmware for x10a with the flash tool to my device. rooted it with z4root installed busybox and xrecovery and then through xrec i installled my custom .zip and I got servie but no 3g so I manually typed in the apn settings from this site....they wont let me post a link .... and everything works perfectly!
Hi all,
So I'm a bit confused about the radio. I flashed new basebands on my Droid 1 all the time, so I'm familiar with the idea. But I mistakenly flashed BAMF 1.5 directly after the manual rooting process, rather than the radio (which at the time apparently was missing the LTE portion of the update?). I tried to install the newly-fixed version that includes the LTE portion, and Clockwork is unable to install from the zip. Am I missing something? Or maybe there's a way to boot to the old "white" menu where there's a few different options, rather than just Clockwork recovery?
Thanks for any help. If I don't respond tonight, I fell asleep.
You need to boot into the bootloader and flash the file from there, not from recovery. The file must be named PG05IMG.zip and be located in the root (not in a folder) of your sdcard. Turn off the device. Hold volume down and turn it on, you should get the white screen. pick the top option (bootloader) and then wait, it should recognize the file, ask you to push volume up to confirm, and then flash it. After you reboot, delete the file from the sdcard, and then you can resume flashing roms from CWR =)
Aah, OK--a bit different than how the Droid worked, where I remember applying .zip files with radios through SPRecovery (and maybe Clockwork too?). I'll do it this way after/during work, since the file is already on the SD card. Thanks!
Hello to all,
Firstly first post to this site and also new to the world of rooting/flashing so bare with me on this one..
Ok as title states I would like to know on how to successfully flash my x10 and receive the benefits that xda have given to alot of us!
Phone specs:
Xperia x10a.
Ver 2.1update1.
Rooted via super one click.
So far I have only been able to root the phone.. I have TB and have performed a back up recently. I do also have the Rom Manager app whilst watching a tutorial via youtube flashing using the Rom Manager I was not able to use the Flash ClockworkMod Recovery as the x10 was not in the listing to proceed. I have also got xrecovery ver 0.3 and tried another method using this but I was not able to install xrecovery properly.. I downloaded it all well and good but went to install and the 3 windows never became ticks just crosses.. Uninstalled and reinstalled but to no avail it did not work..
So my questions are:
Have I done something wrong on my end for this not to work? (knowing my luck yes).
And all I'm after if someone could take the time out and lay out a clear somewhat easy path in order for myself to be able to flash and install custom Roms? cm7 is what I would like to use unless if a good recommendation is given.
Thank you in advance to all and I do apologize for the long post I just wanted to make sure I covered everything.. Still new to this
Kind Regards.
Agera.
Xrecovery installer can be a bit troublesome. Sometimes it doesn't even work for me.
In my opinion, the best way to install xrecovery, root, & jit enable your x10 is through flashtool. You will need a PC but the process works better than the installer. Try that method and find out if that works.
Hey thanks for your reply, my noobness is showing greatly at this point regarding xrecovery... it'll help if I actually click install busy box and destination folder (duh) made me look....yeah Ok well now I have a phone that has been rooted and now have xrecovery in operation, I guess now comes to install a custom rom.
Now to sum it all up basically I have to copy paste desired rom and google rom pack load it onto the sd card (not in any file inside sd but just on sd) perform final backup get into xrecovery factory wipe first? I believe then custom rom reboot then get back into xrecovery then install google apps reboot and done?
I hope I got that down I'm trying to remember processes without having to go back to a tutorial, if I left anything out permission to give me a clip over the ear
Cheers.
When you pick a ROM, make sure the phone's baseband matches the ROMS baseband the developer wants. Also, follow how the way the dev wants the ROM installed, like phone wiped and cache wiped and stuff. And sometime there are multiple files that needed to be flashed in a specific order in xrecovery. So make sure you follow all the devs directions. Hope this helps.
Sent from my X10i using XDA Premium App
and you can find different ROMs that don't require you to flash googleapps as well, that just makes it confusing. I started with FreeX10, as it was simple and easy to install. once you have a hang of it, I recommend using Trip's GB MIUI. and you said you backed up phone before you installed xrecovery? I recommend you backup using xrecovery first
Sent from my X10 TripNMiUI using XDA Premium App
fixed phone was able to get back into xrecovery and do a restore...
Ok, something I want to ask regarding what I did today when I went to update to a newer o/s eveything went fine until after the phone rebooted and came back to the home screen the 2.2.1 froyo rom I used seemed to be refreshing itself every 2 seconds which made it next to impossible to navigate around the phone... The arc version 2.3.1 opened up and about 30 seconds it froze restarted and shut down again did that for a while... So both didnt work for me only other thing I opened up was the google pack so I could get the market and gmail, I also tried it without installing google apps... same thing happened.
So my question is have I forgotten to put an extra file in? or was it my blind luck that I used to unstable roms?
I've really tried here.. if anyone can please post a link that is certain to work with exactly what i need to do and what files I need that would be really great. Whether its 2.2 or 2.3 it doesnt matter to me so long as it works at this stage I'm having no luck getting something solid here...
Cheers.
Tried getting a cyagen 9 ICS rom on my 3g wifi 10.1 tab, forgot to install the clockwork stuff, and now it wont work no more. Think i managed to delete everything on it!? Did manage to install clockwork after via odin but now it find no files on sd and nothing else will work. The sd card will not appear via usb on my pc so i cant put new files in!?
Is there any hope for it or is the garbage can next stop?
Magnar, Norway
Apparently you can see the device with odin - I'd recommend doing a full restock, you can follow the guide at the overcome experience: http://www.teamovercome.net/p7500/?page_id=5
Scroll down on that page until you see the "Re-“Stocking” Yer System…" part and follow the instructions there.
Once you do that your tab should be back in working condition and you'll be able to install CWM and a custom ROM with it. And another piece of advice - always (seriously, ALWAYS) do a nandroid backup of your system before flashing ROMs, especially if you aren't 100% sure what you need to do. This way, if something goes wrong, you can always just restore the backup and you're good to go.
Best of luck!
Why don't you just mount your tablet to you PC through - mounts and storage in CWM recovery? It should work. If not, do what the guy above me said.
jippi
Tried mounting usb but it did not work just got error. Tried the full restock and that did the trick. THANKS
That's why reading helps, It clearly says "Flash the zip using CWM" because modified files cannot be flashed by the stock recovery due to Googles restriction's to avoid breaking their EULA, so the work around would be using a personal made CWM. Problem is stock one is only meant to flash update.zip, to specific folder's, when you install a ROM via stock, it just dumps and replaces everything in one place, It's like getting all your 3 Science subject notes mixed in 1 notebook, you have no idea what is what.
But I'm a bit (really) confused about a lot of things regarding this process. I've been reading for a week now and barely getting anywhere.
So first, a little history.
I'm running a stock vibrant, Froyo.UVKB5, 2.6.32.9 kernel, never been rooted.
Now, one of the main reasons for my upgrade is the loss of wifi connectivity. For some reason I can no longer connect to most ISP's or WIFI hotspots, especially my own.
Now, here's the kicker; I don't have a data package on my service so I am dependent on wifi only. Now that I can't get wifi, I'm not sure if I can get all the files I need to do this upgrade. I'm hoping this upgrade will reconnect me to wifi.
Reading through the Wiki for rooting (http://forum.xda-developers.com/wiki/Samsung_Galaxy_S/SGH-T959), it says I am to use Superuser AND binary, is this correct?
I've found a boatload of Superuser files one the ClockworkMod ROM Manager website, ... which one do I use, there's no explanation?
And I understand I need to install SuperSU AFTER I have it rooted.?.
Regarding an updated OS, from the questions and remarks on this post (http://forum.xda-developers.com/showthread.php?t=1900763), I need both a kernel AND a rom? But other threads I've read say the kernel is in the ROM. Does this mean that CyanogenMod's CM7.2.0 is kernel only and doesn't get you anywhere?
Also from this thread, suggestions were made to upgrade to one kernel, then a rom, then to another kernel and rom, and finally to the kernel and rom the user wants. Why is this necessary?
I have many more questions but they branch off depending on answers to these fundamental questions here.
So, if there's anyone with enough patience and willing to hold my hand through this process, I would greatly appreciate it.
And I need to go cancel my monthly paid warranty fee on this old phone too.
ROMs typically include a kernel in their update zip. CyanogenMod is a ROM and as such includes our own kernel when you install it. Be aware of the 911 issues before upgrading your os to a custom rom.
Sent from my Galaxy Nexus using xda premium
To install Clockworkmod, if you are using Android 2.2 Froyo, go here: http://forum.xda-developers.com/showthread.php?t=833423
Run the "3e_recovery_installer" from your computer with the phone connected and USB debugging mode enabled. Then boot into stock recovery (Hold VOL+ and VOL- and POWER with the phone off, release when you see the logo) and flash the "update.zip" twice. It will boot into a green CWM that temporarily exist until you turn off the phone, beware that this temp CWM only let you flash zips from your Vibrant internal storage, it will not recognize your microSD.
Note: If you are using Eclair 2.1, you should be able flash the update.zip directly without the "3e recovery installer".
You can either flash root from CWM, or download a rom like SlimBean and flash it directly. When you flash a custom rom, it will install a newer version of CWM first (because the older version of CWM will not be able to flash the rom) and the phone will reboot. Take off the battery and put it back, boot into recovery again to see the new version of CWM, then you can install the custom rom again fully this time. Generally you should do a "wipe data and cache" before installing a rom, but sometimes, you might also need to go to "mount and storage" and format the /system folder before you can flash a new rom successfully. This can help avoid system files from your old Android installation to exist and merge with the new rom installation. However, the /system folder is where most of the OS important files are locate so without it the phone won't boot, so you need to have a custom rom in the phone (or microSD) to flash after you format it.
That should pretty much cover most of it. If you ever run into problems you can always use ODIN to recover the phone to factory stock. In fact, if you want to stay with stock and just want your WiFi to get fixed, its probably better to simply do an ODIN recovery (or a factory reset) first, before looking at custom roms.
Most of what I just said is covered in this sticky: http://forum.xda-developers.com/showthread.php?t=849028