Hi friends,
elix kernel is fake seem gpu of stock kernel for me ...tested with gl bench 2.5.1 and comparision of antutu
I search kernel gpu really increased gpu tegra 3 ap 37 in fps :good:
Thanks a lot
allgsmnetwork said:
Hi friends,
elix kernel is fake seem gpu of stock kernel for me ...tested with gl bench 2.5.1 and comparision of antutu
I search kernel gpu really increased gpu tegra 3 ap 37 in fps :good:
Thanks a lot
Click to expand...
Click to collapse
If you really want to increase 3d/2d performance flash a custom rom with gpu 2d rendering mod and run the attached script (use GPU-scaling-JB-OFF) on boot with root with scriptmanager. Also flashing 256mb swap helps allot with 3g gaming especially those that would usually crash your launcher.
ryanjsoo said:
If you really want to increase 3d/2d performance flash a custom rom with gpu 2d rendering mod and run the attached script (use GPU-scaling-JB-OFF) on boot with root with scriptmanager. Also flashing 256mb swap helps allot with 3g gaming especially those that would usually crash your launcher.
Click to expand...
Click to collapse
Thanks friend,put when?
Hallo community,
i was reading here in forums about overclocking the S2 to find the solution matching my needs. I want to UNDER-clock my phone to get a better batterylife.
I allready made many optimizations so I have really good Bat-Time.
Now I'm at the point where it comes to Undervolting. Unfortunately the solutions shown here in forums dont work for my setup.
I have a i9100 + Supernexus2.0 build4 ROM (AOSP 4.2.2) + DorimanX 8.13 Kernel
CPU-Undervolting is no problem......the problem starts when it comes to modify GPU-settings. None of the Software discussed here regognizes my GPU. Antutu for example says "GPU not supported" on GPU-tab. (tryed "voltage control", "antutu", "setCPU" "Tegrak" NS-tools" and many others )
Now I'm on the point where I accept, that there is no simple-software-solution to automize my settings (or perhaps I didn't see it) and I try it with "STweaks"
So what I going to try now is to modify the the different steps and set a voltage/mhz manual everytime I boot-up.
But in other Forum-posts I read, that there are 3-GPU-steps. In STweaks there are shown 5 steps to me ?!
I dont have the right clue what Step is set in which state. What does these steps mean exactly ?
Can anyone help me how to Undervolt my GPU correctly ? I dont need 267MHz+1050mV. I'm happy with 160MHz and 900mV (for example) The games I play are not very hungry. Also I heared from other users that undervolting there GPU gave them +3 Hours playing time, unfortunatly I can't reproduce that here
Is it perhaps because I have 4.2.2 ROM with newest DorimanX, that I cant do the solutions that work for others ?
THX 4 any help
best regards
revnu
Discussion thread for the Samsung Galaxy Player 3.6 (YP-GS1) running CyanogenMod 11
Also known as: Samsung Galaxy S WiFi 3.6
Development thread: http://forum.xda-developers.com/showthread.php?t=2657738
Hello XDA,
this the official discussion thread for users of the Samsung Galaxy Player 3.6 running CyanogenMod 11.
This thread is for holding the development thread clean.
What belongs here
Questions (& Answers)
Tips
Bug reporting
Discussing and talking
What not belongs here
Posts like: "YEAAAAAAH" or "Pls do tis for me and tis for mee thxk"
Asking for ETAs (Estimated Time of Arrival), like "When does the next update comes out?"
Rules
Don't flame anybody!
Don't spam!
Stay on topic!
Happy asking, answering and posting!
For the best CPU performance set the min. CPU frequency to 600 MHz in Settings/Performance/Proccessor, and activate 'Set on boot'
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
@Androthan is working on CM11 for the 4.2. Compiling just the kernel isn't enough, you'll need a device tree of the 4.2 made for CM11 and build a ROM with that.
Ca110 said:
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
Click to expand...
Click to collapse
Actually bluetooth isn't working, so I can't tell you.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
The kernel source for the 4.2 player, from my github account, are still under constructions and won't work.
And, of course, you don't need to compile it yourself.
I'll start with porting to 4.2 when the build for the 3.6 is a lot more stable.
BTW, the player 4.2 is off-topic here
Quentinga said:
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Click to expand...
Click to collapse
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Androthan said:
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Quentinga said:
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Click to expand...
Click to collapse
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Androthan said:
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Click to expand...
Click to collapse
I speak a lot, but I don't now how it's difficult because It's too hard for me =P
The bootanimation is kinda big for our screen. Maybe we can resize it?
Also, the home button in US version doesn't work.
Android 4.4.3
***Android 4.4.3 is out***
Google released the Android update 4.4.3. This update contains mostly bugfixes and improvements (Read more here: http://liliputing.com/2014/06/whats-new-android-4-4-3-kitkat.html) Don't expect any new features with this update. CyanogenMod is currently merging Android 4.4.3 into CyanogenMod 11, so we have to be patient. As soon as this is done, I'll update my local source code.
Expect Alpha 3 in the next 4 to 5 days.
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
I think CWM 5 is out for stock gingerbread rom one year ago : http://forum.xda-developers.com/showthread.php?t=2198234
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
Sorry but this isn't possible and will end in a soft brick.
Thanks @Quentinga & @Androthan, you saved me from making a stupidity
I keep an eye on this rom and will test soon.
Does music/video playback work on Alpha 2 ? (not able to use the sdcard space and Apollo crash everytime)
Phone feature is enable like in CM 7.2, or it's disable? (It is)
EDIT: (07/06/2014)
1) If the player is plugged in and switch it off, it will restart.
If, however, is not connected, then turns off simply.
2) In alpha2 there isn't the performance menu in option.
Any news with wifi module ? the awesome @zaclimon can't help you ?
I have originally posted my problem on XDA-Assist, but have been advised to ask for help here.
user700512 said:
Hi all,
I'm with an X8 having nAa's 2.6.32.61 jb kernel and MiniCM7 2.2.2. S2E is my sd-ext manager (SD is a class 10 Sandisk Extreme 60 MB/s). I cannot get the BT working. I have an indication for on/off, I make it discoverable, I try to scan, but I get nothing or random erratic behaviour (mostly FC/W, occasionally mac addresses instead of device names, once a device name), but never succeeded in pairing and connecting to anything. How can I get the BT working? It used to work on stock kernel/ROM and on stock kernel/GingerDX v031b, and I would rather consider it a SW glitch than HW. Kernel and ROM were flashed/installed strictly according to the instructions in the relevant threads here. The X8 works OC'd to 768 MHz (no UV) with a performance governor, but I've tried at stock speed (600 MHZ) with an ondemand governor - no difference.
Click to expand...
Click to collapse
Does anybody remember having an issue with the BT and how can I resolve it?
I saw the small note in nAa's post, but is it related to the RC or also to the release?
nobodyAtall said:
Bugs confirmed:
- Bluetooth ADSP
Click to expand...
Click to collapse
Does anybody know if 2.6.32.63 XPerience's kernel has the BT working?
Hello all,
how can i change the CPU/GPU mode to perfomance? should i root my phone for this? Sorry if this is a newbie question.. i already saw in some threads here ( benchmark thread ) that some user got better results by changing these to perfomance. also its better for gaming on my opx.
thank you
As far as i know, yes.
You need root to use Kernel Apps, like Kernel Aduitor.
seriyo said:
Hello all,
how can i change the CPU/GPU mode to perfomance? should i root my phone for this? Sorry if this is a newbie question.. i already saw in some threads here ( benchmark thread ) that some user got better results by changing these to perfomance. also its better for gaming on my opx.
thank you
Click to expand...
Click to collapse
yes, root it and install kernel auditor to change settings. Or install custom kernel(blu_spark is available and its good) and tweak accordingly and carefully.
But be cautious, changing to something you don't know may render your phone to be useless/boot loop or brick. Do only the changes you know.