I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
Is anyone willing to try something I DID and seems to me to give my tablet significant speed increase. I want to check if it is real or just my imagination.
In my latest fw 2.1.08 installed, I flashed 2.1.08 initframs and 2.0.71 zimage (both from chulri files, first post . you know how to : flash kernel from developer menu at boot holding vol- button)
And I set the speed with SetCPU 2.1.1a to 1000mHz both min and max. Also in settings menu I choosed "Overdrive"
Please test and report.
Thanks
lagoskon said:
I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
Is anyone willing to try something I DID and seems to me to give my tablet significant speed increase. I want to check if it is real or just my imagination.
In my latest fw 2.1.08 installed, I flashed 2.1.08 initframs and 2.0.71 zimage (both from chulri files, first post . you know how to : flash kernel from developer menu at boot holding vol- button)
And I set the speed with SetCPU 2.1.1a to 1000mHz both min and max. Also in settings menu I choosed "Overdrive"
Please test and report.
Thanks
Click to expand...
Click to collapse
Of course it is real, since your tablet will run at maximum speed all the time instead of running at 1000mhz for heavily load task only like default (not count the overclock here). However, it will consume more battery and get hot faster.
If you don't care much about battery life, then it will do the trick.
Before the 2.0.71 zimage kernel I was running at full speed the 2.1.08 kernel. After the switch I noticed more speed gain. That's why I need confirmation from other users.
I have had my A70 set to 1000 min and 1200 max for months now, and I have seen a speed increase, and only a little extra battery drain.
lagoskon said:
I posted in Chulri's thread but here will be better seen from anyone.
Device : A70IT , fw 2.1.08
...
Click to expand...
Click to collapse
What kind of test you want to?
Have you try OverClock? Archos Gen8 can OC to 1.2GHz as well
Discussion thread for the Samsung Galaxy Player 3.6 (YP-GS1) running CyanogenMod 11
Also known as: Samsung Galaxy S WiFi 3.6
Development thread: http://forum.xda-developers.com/showthread.php?t=2657738
Hello XDA,
this the official discussion thread for users of the Samsung Galaxy Player 3.6 running CyanogenMod 11.
This thread is for holding the development thread clean.
What belongs here
Questions (& Answers)
Tips
Bug reporting
Discussing and talking
What not belongs here
Posts like: "YEAAAAAAH" or "Pls do tis for me and tis for mee thxk"
Asking for ETAs (Estimated Time of Arrival), like "When does the next update comes out?"
Rules
Don't flame anybody!
Don't spam!
Stay on topic!
Happy asking, answering and posting!
For the best CPU performance set the min. CPU frequency to 600 MHz in Settings/Performance/Proccessor, and activate 'Set on boot'
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
@Androthan is working on CM11 for the 4.2. Compiling just the kernel isn't enough, you'll need a device tree of the 4.2 made for CM11 and build a ROM with that.
Ca110 said:
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
Click to expand...
Click to collapse
Actually bluetooth isn't working, so I can't tell you.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
The kernel source for the 4.2 player, from my github account, are still under constructions and won't work.
And, of course, you don't need to compile it yourself.
I'll start with porting to 4.2 when the build for the 3.6 is a lot more stable.
BTW, the player 4.2 is off-topic here
Quentinga said:
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Click to expand...
Click to collapse
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Androthan said:
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Quentinga said:
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Click to expand...
Click to collapse
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Androthan said:
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Click to expand...
Click to collapse
I speak a lot, but I don't now how it's difficult because It's too hard for me =P
The bootanimation is kinda big for our screen. Maybe we can resize it?
Also, the home button in US version doesn't work.
Android 4.4.3
***Android 4.4.3 is out***
Google released the Android update 4.4.3. This update contains mostly bugfixes and improvements (Read more here: http://liliputing.com/2014/06/whats-new-android-4-4-3-kitkat.html) Don't expect any new features with this update. CyanogenMod is currently merging Android 4.4.3 into CyanogenMod 11, so we have to be patient. As soon as this is done, I'll update my local source code.
Expect Alpha 3 in the next 4 to 5 days.
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
I think CWM 5 is out for stock gingerbread rom one year ago : http://forum.xda-developers.com/showthread.php?t=2198234
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
Sorry but this isn't possible and will end in a soft brick.
Thanks @Quentinga & @Androthan, you saved me from making a stupidity
I keep an eye on this rom and will test soon.
Does music/video playback work on Alpha 2 ? (not able to use the sdcard space and Apollo crash everytime)
Phone feature is enable like in CM 7.2, or it's disable? (It is)
EDIT: (07/06/2014)
1) If the player is plugged in and switch it off, it will restart.
If, however, is not connected, then turns off simply.
2) In alpha2 there isn't the performance menu in option.
Any news with wifi module ? the awesome @zaclimon can't help you ?
Hello all,
how can i change the CPU/GPU mode to perfomance? should i root my phone for this? Sorry if this is a newbie question.. i already saw in some threads here ( benchmark thread ) that some user got better results by changing these to perfomance. also its better for gaming on my opx.
thank you
As far as i know, yes.
You need root to use Kernel Apps, like Kernel Aduitor.
seriyo said:
Hello all,
how can i change the CPU/GPU mode to perfomance? should i root my phone for this? Sorry if this is a newbie question.. i already saw in some threads here ( benchmark thread ) that some user got better results by changing these to perfomance. also its better for gaming on my opx.
thank you
Click to expand...
Click to collapse
yes, root it and install kernel auditor to change settings. Or install custom kernel(blu_spark is available and its good) and tweak accordingly and carefully.
But be cautious, changing to something you don't know may render your phone to be useless/boot loop or brick. Do only the changes you know.