Today I have updated to 1.9.0 of StreakDroid - http://forum.xda-developers.com/showthread.php?t=1003525&page=13
But after this i get some errors. (processes have to close)
android.process.acore
android.deskclock
com.android.deskclock
android.process.media
com.android.providers.calender
Can some one help me?
Did you do the factory reset before updating ?
Yes, up to now 3 times. Factory reset and Cache Wipe. :/
Last versions run without errors
Did you use the clockwork mod or streak mod to do a reset??????? as they will not fully reset it,,,,,, You need to use the factory reset on the first page with 4 options and not go into the clockwork mod
I have tryed both, but nothing works. And I use StreakMod. I think there are more errors with dell stage as with launcherpro.
atm I try to install it with "noapps" präfix
/edit/ Looks it works. Rollout my backups atm.
But no errors at home screen so far.
dont know what the issue is. But it works and so it is ok.
Related
Help needed again. Yesterday I installed Ken's 4.5.91 2.3.4 and have had 2 re-occuring errors ever since. Calendar storage ( force closed) com.android.calendar., and com.motorola.suggestions.scheduler (forced close). These errors reappear at random times. There was 1 more but I didn't get it written down... something about poll scheduler.....
Can I reinstall from my sdcard and possibly fix this?
Yes , I would reinstalled you should wipe via fastboot so you know it wipes everything. CWM dont wipe everything. then try the kp rom again i have no problem with mine.
Just wondering if anyone can help me out. A few days ago I installed the new market apk that was floating around. It installs fine, and once it loads the main title screen it FC's.
I've tried all install methods, uninstalling the old, overwriting the the vending.apk.. as well as combinations of wipe cache/data for market, and market updater. I've also tried wiping cache/dav cache as well.
Now tonight I just tried the updated gapps package.. flashed from CWM, and same problem.
I'm telus fascinate, cm7 galaxysmtd70, glitch v11.
Any help?
Thanks.
FYI, I have CM7 Build 3 from nightlies thread.
I installed the new market ('vending.apk'), it is not fc'ing for me. But it does seem to take longer to load than the old version of the Android Market. My LauncherPro, however, does force close from time to time.
Try running 'permission fix' from ROM manager that came with CM7.
I ran this fix and the first time my phone booted, it was on 'safe mode.' Pulled battery and everything was fine. I have yet to find any fc'ing issues after doing so.
Try your luck!
Go into settings then force stop and delete data for Market. Reboot, then try opening the Market.
Thanks for the suggestions, but neither worked. I got to figure this out. If I do, I will keep this post updated.
I cannot figure this out for the life of me. I've tried everything. Including full wipe and reinstall. Still getting the FC's.
MrManiacNF said:
Now tonight I just tried the updated gapps package.. flashed from CWM, and same problem.
I'm telus fascinate, cm7 galaxysmtd70, glitch v11.
Any help?
Thanks.
Click to expand...
Click to collapse
which recovery did you try to flash the gapps. zip with? Did you use the power button menu reboot recovery...or did you three finger boot to recovery?...im just saying I've done it by accident/force of habit!...just covering the bases since this is the first I've heard of gaps not installing correctly or fc'ing left and right on anyone.
Sent from my SCH-I500 using XDA App
i installed GS 2.4.4 and intalled same programs after reboot the streak and have a problem loop booting what can i do ?
raptoid said:
i installed GS 2.4.4 and intalled same programs after reboot the streak and have a problem loop booting what can i do ?
Click to expand...
Click to collapse
Honestly honestly what I suggest is you back up to a more stable build. GB2..4.4 is a beta just like all the Gingerbread builds and upcoming ICS builds will be betas because there are no official releases,
If something like a boot loop hangs you up, you definitely shouldn't be running Gingerbread or anything beyond Froyo as those problems will always exist with these builds....
But to answer your question, you need to boot into recover, clear your cache, your dalvik cache, flash the ROM again and then do a factory reset
raptoid said:
i installed GS 2.4.4 and intalled same programs after reboot the streak and have a problem loop booting what can i do ?
Click to expand...
Click to collapse
cdzo72 said:
Honestly honestly what I suggest is you back up to a more stable build. GB2..4.4 is a beta just like all the Gingerbread builds and upcoming ICS builds will be betas because there are no official releases,
If something like a boot loop hangs you up, you definitely shouldn't be running Gingerbread or anything beyond Froyo as those problems will always exist with these builds....
But to answer your question, you need to boot into recover, clear your cache, your dalvik cache, flash the ROM again and then do a factory reset
Click to expand...
Click to collapse
The latest GingerStreak build is stable for most people using it, but it is not a final release yet
The boot loop problems are most likely related to not doing a factory reset of the phone or not following the install instructions to the letter. Another possibility is over clocking the CPU too high, some Streaks can not be over clocked.
If you can get into recovery do a reset from the first screen.
ADW
Just to add......I had the same problem after flashing 2.3.3. In fact, mine went Bricked and couldn't even get back to stock with streakflash. Luckily, I've had BB's Geek warranty, so I got a replacement.
Couldn't stand stock ROM, so tried SD 2.4.4. All went well until I started updating restored apps from the market, then phone would go into reboot loops, requiring a factory reset each time.
Then I tried without overclocking, still crashed into the reboot loops.
Finally, went to a different launcher (Go, rather than ADW) and so far it's stayed stable. No FCs, nothing. I'm thinking ADW didn't like something.
raptoid said:
i installed GS 2.4.4 and intalled same programs after reboot the streak and have a problem loop booting what can i do ?
Click to expand...
Click to collapse
I think is md5 checksum problem, try to verify it before flash, and flash rom only if you're sure of that
Just try dsc rom. I got no random reboot, no sod or any major bug.
power_rom is rapid, stable and smooth.
Hi all,
I just flashed: update-cm-7-20120226-NIGHTLY-galaxys2att-signed.zip. I seem to be having some issues with the com.android.systemui not working. I get an error message on startup saying that "the application Status Bar" has stopped.
My previous mod before applying this one was the cm7 nightly.
Anyone else having similar issues with update-cm-7-20120226-NIGHTLY-galaxys2att-signed.zip ?
i don't used mui but i think you flash rom other, because this rom not complete
Try a clean install, do a factory reset in CWM and reflash the rom. Should solve the problem.
Still same issue even with clean install.
Yes, I am too. I'm going to try replacing the systemUI.apk with a different build version and see if it does anything. I'll post an edit if it works, and the steps to do so.
EDIT: Nope, it didn't work. I'm still having the com.android.systemui crashes for the status bar.
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Foster Basic said:
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Click to expand...
Click to collapse
Hi,
Managed to solve this issue by reinstalling the previous gapps and then reinstalling the firmware. Hope this info helps.
gapps-jb-20121128-signed.zip - I also had problem with this update
Foster Basic said:
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Click to expand...
Click to collapse
I also had problem with this update!!!!!!!
Problem with 28 Nov. GooManager received update for Jandycane 1.8
(updates jandycane 20121020 and gapps 20121011 done on 09/11/12)
........................
On 28 November GooManager automatically downloaded the following: gapps-jb-20121128-signed.zip
On the 29 November I flashed this on my first gen. Kindle Fire
As follows:
first did a Backup then wiped Cache and Dalvik and then started update - gapps-jb-20121128-signed.zip
after starting update got a Dalvik cache Directories wipe complete message (then)
Verifying Filesystem....
Verifying partition sizes...
Install ........ gapps-jb-20121128-signed.zip
Finding update package
installing
......
......
(and finally)
Installation Complete!
(then once again under this the texts)
Verifying Filesystem....
Verifying partition sizes...
But there it seems to have stopped (completed?)
And under in TWRP I have the options: Wipe Cache/Dalvik - Home - Reboot System
I decided to choose Reboot system
The following happened:
I got a message "upgrading Android apps"
then it started in the normal ("turning mirror bits") loading window
then the usual password window
but the keyboard wouldn’t open!!! I couldn’t get past the password window
also I notice that the WLAN was no longer on/active (it had been on during the process)
I tried several reboots – still the same
I eventually decide to do a restore of Backup – this was successful!
I have no idea what is or went wrong
Is there something wrong with this gapps-jb-20121128-signed.zip it certainly seems like it?????????
Any other experiences?
I've had the exact problems you both describe running a clean flash of nightly with CM10 on a Nook Color. Everything is great until gapps-jb-20121128-signed.zip is loaded, then keyboard is disabled, crashes, etc.
http://goo.im/gapps/gapps-jb-20121128-signed.zip appears to have been removed from goo.im
gyrfalcon said:
I've had the exact problems you both describe running a clean flash of nightly with CM10 on a Nook Color. Everything is great until gapps-jb-20121128-signed.zip is loaded, then keyboard is disabled, crashes, etc.
http://goo.im/gapps/gapps-jb-20121128-signed.zip appears to have been removed from goo.im
Click to expand...
Click to collapse
Hi, and thanks for replying - now I know for sure it wasn't me that screwed up, wasn't sure!
Glad to hear that it has been removed - but that's really bad - sending out a really bad update like that - lucky we didn't end up with Bricked devices - really frustrating and not a nice thought at all - I'm really grateful for whoever it is that does all this work...but...putting something like that out ... that is scary ........ don't know if I will now trust the next download(s)!!!!!!!!
who is it that does these gapps anyway?