okay, right now I'm running the EB01 stock kernel. I'm hoping to go to the EB01 voodoo, or EC10 voodoo kernel. my question is, I want to be able to go back to stock so I can take advantage of any warranty issues that may pop up in the next 6 months that are left on it. I have read you can't flash a non voodoo kernel over a voodoo kernel? if this is true, how can you get it back to stock?
Odin DI01 stock.
thanks, is there a stock dl01 rom out there, somewhere? I don't have any stock roms left after my hard drive corrupted (stupid sandy bridge)
Make sure not to install by CWM, just to remind you.
http://forum.xda-developers.com/showthread.php?t=867648
great thread, no working links. the story of this forum. I still have yet to even find a working cwr.
Did you actually click it? First link in the thread works for me.
aarg, I think something's going on with this installation of linux/firefox, I can't wait until ubuntu 11.04. I got it, thanks.
Related
I am just wondering if whether or not I should or need to be going back to stock when installing new ROMs or if I should just disable Voodoo or if I even need to do that.
It seems with newer ROMs the updates dont require you to disable Voodoo, just flash over. But what if I want to go from Bionix V to Auxura 2.2.9.0? Do I need to go back to stock and then root/flash? Or will just disabling Voodoo work? Or should I just flash and go?
I have searched and see different ways to do things but not a clear answer on if I should be doing that or if its necessary when going between ROMs.
Also if I have overlooked a thread on this I think it should be stickied or in the NOOB guide.
Thanks.
Your going to get different opinions on this. If your going to flash the newest version of the rom your on then there is really no need to odin. If your going to a.completely different rom then yes go ahead and odin. Of course its never a bad idea to start fresh.
Powered by Axura with a dash of Voodoo
If you Odin back to stock you lose all information including titanium backup right? You really are starting from scratch if you do this correct?
se1zure31 said:
If you Odin back to stock you lose all information including titanium backup right? You really are starting from scratch if you do this correct?
Click to expand...
Click to collapse
No. You will still have your files when you odin.
It's safer to disable voodoo then odin then flash custom rom. Well that's what i do, though you can odin without disabling voodoo.
iynfynity said:
No. You will still have your files when you odin.
It's safer to disable voodoo then odin then flash custom rom. Well that's what i do, though you can odin without disabling voodoo.
Click to expand...
Click to collapse
Thanks for the quick reply! I am still new to loading custom ROMs on this. I am coming from the HD2 which was the easiest phone to load custom ROMs on I think.
Another tidbit of advice, if you're updating a rom (e.g. going from Axura 2.2.7.2 to Axura 2.2.9.0) you don't need to disable Voodoo.
Even if you're changing roms (e.g. TW Bionix-V to Axura 2.2.9.0) in theory, you shouldn't need to disable Voodoo, I've done it successfully. This works because both are running Voodoo v5.x and up, and both roms have Voodoo enabled off the bat.
Some older roms running Voodoo V4.x CANNOT be flashed over each other and Voodoo must be disabled before flashing.
There's no real harm in disabling Voodoo and flashing over it, but if you forget, the worse that's going to happen is you'll have to odin back to stock.
I have never odin to stock before applying another rom and have not had any issues. I always disable voodoo and wipe/factory reset before applying a new rom. I think odining to stock to apply a different rom is waste of time and not needed. Look at the directions of installing Flagship and that's the best way to go from rom to rom.
hi
im new to Samsung and android, i want to test out some
ROMS. my phone was bought secondhand and it came pre
loaded with the details in my signature.
i have read through most of the newbie guide lines here on
this site on how to flash but nowhere (as for what i saw)
does not mention on how to test if your phone has a lagfix or by
which method.
as i have read you got to turn off the lag fix before flashing ROM's
so how do i turn mine off.
thanks
HtcDia
*** my current phone details are in my signature ***
Thank you for posting in the correct section and reading some material before posting!
As to your question, if you are completely stock (rooted or not), your Vibrant does NOT have a lag fix enabled. Most of the newer Roms allows for flashing over a lag-fixed (Voodoo) enabled kernel, but only if it comes equipped with a Voodoo injected kernel.
Basically
No lagfix enabled -> Can flash any rom (voodoo kernel or non voodoo kernel)
Lag fix enabled (Voodoo) -> Can flash roms with Voodoo kernel without turning off Voodoo | Must disable Voodoo to flash non-Voodoo kernels
edit: I'm not sure if that is the answer you're looking for but if you go to the red CWM recovery, you can go to Voodoo -> Disable Voodoo. If you do not have a red recovery, then most likely you do not have a Voodoo enabled kernel, thus do not have a lagfix in place. (I assume you also did not use One-Click Lagfix)
thanks anthonys2r
i have not seen either voodoo or anything pertaining to it on my phone nor
have i done the one click fix.
so i can safely assume that i do not have one in place.
thanks for the answer it is perfect
HtcDia
^ You may want to start "fresh" and use ODIN to go back to stock... very easy process (check my signature).
You likely DO have a lagfix (ext4 "voodoo"). But, if your next rom has voodoo enabled, it will not matter if you disable it or not.
There is an app, Voodoo toggle in the market you can use... or you can reboot into CWR and go to the voodoo section. It will also tell you.
Here is the Simply Honey ROM THREAD
Not sure if you were planning on updating or trying a new rom... if the latter, really recommend going back to stock again. I would also encourage Trigger 3.2... its 2.2 but it's stable/themed well!
opening a terminal emulator and typing the command: mount should tell you what file system you're running. Unless everything lists RFS you have a lagfix enabled. If not just 3-button to recovery and scroll down to voodoo... It will tell you inside if it's activated or not.
s15274n
It's funny you should suggest that i should checked your signature
because most of the stuff that i have gathered initially till present
came from your links LOL.
thanks for providing them as they are great material for android scardy
noobs like me.
yes i do have voodoo. i actually found it lol.
if im right what i want to do is now upgrade my version.1 Simply Honey ROM
to another stable version just to get a feel of flashing and stuff
thanks
HD
Good stuff man.... glad that it helped.
s15274n said:
Good stuff man.... glad that it helped.
Click to expand...
Click to collapse
On a related question, i can't initiate voodoo for some reason. I read the log and it said "model not detected". Anyway to correct this?
I cant seem to enable voodoo on my phone I have trigger 3.2 and I flashed overstock 1.5.2UV, I'm coming back from CM7 and I don't have the red clockwork recovery either? What can I flash to get this going I have Voodoo toggle that doesn't work neither does voodoo control ...
Did you odin back to stock and then flash Trigger and Overstock?
yw2012 said:
On a related question, i can't initiate voodoo for some reason. I read the log and it said "model not detected". Anyway to correct this?
Click to expand...
Click to collapse
Mine says the same thing anyway to correct this...I've already odin, wiped, re partition with odin and still nothing
jneal9 said:
Did you odin back to stock and then flash Trigger and Overstock?
Click to expand...
Click to collapse
Yes I did, I'm going to do a few more things to see if I can get it to work
Hm. When booting Trigger for the first time did you hear the voice enabling voodoo?
No Im sure it has to do with CM7 file systems or something...
If you odin'd back and checked repartition that should have wiped the CM7 filesystem and reverted it back to stock RFS.
And you are on Trigger and don't have the red Clockwork?
jneal9 said:
If you odin'd back and checked repartition that should have wiped the CM7 filesystem and reverted it back to stock RFS.
And you are on Trigger and don't have the red Clockwork?
Click to expand...
Click to collapse
I did check repartition it didn't work log file in voodoo folder still says model not detected, Im about to see what happen when I flash trigger 3.2 again I formated system in CWM and odin with repartition checked....
still nothing dam...
Just read another possible solution in a different thread that I didn't think of...
http://forum.xda-developers.com/showthread.php?t=1096439
Try to use Eugene's odin rom, and then go back to stock JFD and see if that fixes it.
I got it you have to odin Eugene's froyo that doesn't brick, then I used Eugene's 2.2 Downgrade odin flashed that annnnnndddddd now I'm flashing Trigger and I can hear Lindas voice now
Happy flashing.
I am currently on UKB 2.0 with commavolt non voodoo kernel. I have noticed that my Bluetooth connectivity is acting up and the missed call issue seems to be getting worse. I think it is time for me to upgrade to a new rom and kernel.
I would like to be on EH03 stock with the new superclean rom but I’m a little confused on how to go from EH03 to superclean. After I ODIN the full EH03 package how do I get the superclean rom on the phone? Do I root then ODIN CWM then load superclean or is there another way? I’m not sure if I could just ODIN the EH03 package then boot the phone up and make sure it works. Then could I ODIN CWM and boot straight to recovery menu to load superclean rom?
It’s been a while since I have loaded anything on my phone and I’m feeling a little rusty so I appreciate any advice you guys could give.
cartman311 said:
I am currently on UKB 2.0 with commavolt non voodoo kernel. I have noticed that my Bluetooth connectivity is acting up and the missed call issue seems to be getting worse. I think it is time for me to upgrade to a new rom and kernel.
I would like to be on EH03 stock with the new superclean rom but I’m a little confused on how to go from EH03 to superclean. After I ODIN the full EH03 package how do I get the superclean rom on the phone? Do I root then ODIN CWM then load superclean or is there another way? I’m not sure if I could just ODIN the EH03 package then boot the phone up and make sure it works. Then could I ODIN CWM and boot straight to recovery menu to load superclean rom?
It’s been a while since I have loaded anything on my phone and I’m feeling a little rusty so I appreciate any advice you guys could give.
Click to expand...
Click to collapse
Section2 of my guide in the general section has this covered for ya...check it out!
droidstyle said:
Section2 of my guide in the general section has this covered for ya...check it out!
Click to expand...
Click to collapse
Thanks. That’s exactly what I was looking for. Your guide answered all my questions.
Hello,
I'm new to rooting hence I'm asking this question just to be safe.
I had Installed passion 10.6 through this route. Stock-2.1>CM7 Gingerbread>10.6. Every time I just wiped cached and installed the ROM form the zip.
What I want to know is if I changed my kernel?
I was reading on the instructions to install bionix and it was mentioned that one would have to disable the lag fix etc or disable vodoo. Do I need to worry about this or should I just flash bionix rom using the zip?
I'm not even sure my question makes sense. Thanks.
If you're thinking of going from passion to bionix then you should odin back to stock just be safe. If you odin back to stock you shouldn't have worry about the lagfix.
You can check what kernel you have by going to settings->About phone->Kernel Version. (i.e. mine is 3.0.1.5-ICUP ICS-Streamline #1). But if you odin to stock, this won't make a difference as flashing bionix will also flash the new kernel they have with the ROM.
Hope I helped a little.
You have to odin to jfd with re partion checked coming from ics, miui, or cm7. The partions are different on non touch whiz roms
Sent from my SGH-T959 using XDA App
Thanks so much. Learning something new everyday.
Can't help but wonder, why are you flashing back to 2.2?
I so wish I did not have to. My battery wouldn't last on passion 10.6 and GPS wouldn't work. So for the time being I'm trying something else. Will try passion again next week(now that I'm hooked ) but I need a working phone in the next week
hi,
I am sorry if this is a dumb question. But i have failed several attempts while shifting to ICS (RC 5 by team-nyx). Every time when i install ROM & kernel via CWM and boot the device (vibrant t959) it freezes on the screen with VIBRANT and SAMSUNG displaying WHITE on BLACK back ground.
i have gone back to JFD and tried several times BUT same result.
I was on froyo 2.2 (build UVKB5) updated via kies and did it but no luck. I followed wiki.cyanogenmod.com/wiki/Samsung_Vibrant:_Full_Update_Guide and did starting from No. 03 --
downloaded Cmenard's Kernel with the ClockworkMod Recovery 2.5
Heimdall Suite 1.3.2 for windows
AND upto No. 9 under Windows ONLY: section
the CWM installs as it says (A blue transfer bar will appear on the phone showing the kernel being transferred. The device will reboot automatically. )
after that i cleared factory, cache and dalvik cache.
then I select install Zip from SD card and chose the ROM (which is from team-nyx.com/index.php/releases).
after 3% it says rebooting and vibrant shuts down and reboots.. when after I clicked the combo (vol+vol-power) to enter the CWM its not there.. so I reinstall using [heimdall flash --kernel zImage] command in PC's cmd. then after i redid the same to select from SD and then ROM installed ok.
then I selected the kerenel which was taken by same source and installation went normal..
after I select reboot from CWM it reboots and hangs on vibrant screen.
I cannot figure OUT WHAT IM doing WRONG..
Please HELP ME..!!!
thank you for your time
I am moving to 2.2 via kies after going back to stock JFD. then i will root my vibrant. after that i will install ROM manager from market. THEN i will try to FLASH to ICS RC 5 + kernel from nyx TEAM.
I dont know what is wrong.. please HELP
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
iwillkillyou said:
From what you told us it sounds right. Have you tried a different ICS rom? Give ICS slim a try. When you Odin back did you checked re-partition?
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi,
thank you for the reply. No i havent tried a different ROM. yes I checked repartiton when ODin Y this is happening.. I have Flashed this ROM once.. but then when someone calls me they cudnt hear me clearly.. when i initiate the call its ok.. so I moved back to JFD..:/
kaiser_bun said:
You should try flashing the Gingerbread bootloaders using Odin after you flash back to stock. Those bootloaders can run a Froyo ROM as well as ICS so it wouldn't hurt to do either way. After you flash the bootloader then try flashing the ROM.
And try a different ROM like iwillkillyou suggested. Slim is good, but ICZen is very solid if you're tipping your toes into ICS.
Click to expand...
Click to collapse
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
haarsh said:
thank you for the reply.. I jz finished Updating to 2.2 via kies..ok I will flash Gingerbread bootloaders using Odin. I will try I think it wont be necessary to ROOT the vibrant..to Flash Bootloaders.. I am going to Flash the ICS ROM via ROM manager (after rooting via SuperOneclick root2.3.3)..
Click to expand...
Click to collapse
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Woodrube said:
Just so that you know, everytime you are using Kies, you are running the risk of hardbricking your device. It is notorius for that and in fact someone last week got HBricked with it.
I don't use ROM Manager and probably won't as long as I have a Vibrant. All you need to do is go back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall PAckages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Also for more detailed instructions, se my ICS install giude also in my signature.
Click to expand...
Click to collapse
Thank you for the links.. I downloaded and place CWR inside SD. Without kies can we install official releases via Odin.. is there any way.. im sorry if that is a stupid question
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Woodrube said:
No stupid questions. That is why we are here. I am pretty sure there is a flashable 2.2 stock floating aroung here. I personally don't have it though. Custom 2.2's are at this point tweaked so completely out, that they will blow the doors off any 2.2 stock ROM out there. I usggest Moped_Ryder's ROMs and Fishman's Bionix-redux ROMs. Quality, fast and stable. Not ICS, but everything works and no fear of the dreaded Encryption Bug.
PM incoming btw.
Click to expand...
Click to collapse
thank you. btw can we Flash to 2.2 via CWM .. directly selecting the ROM from SD .. without Odin
If you can find it, you should be able to. Just put on your card and flash away, taking care to wipe accordingly.
A note on flow though:
2.1, 2.2 -can go into and out of any 2.2 there is laterally.
2.3-4.0 -will need to Odin to stock before going back to a 2.2 ROM. Can move laterally from 4.0 to 4.0 though.
(i.e DO NOT try to restore a 2.2 nandroid or flash a 2.2 ROM when you are on an ICS variant. the /system is completely changed and reformatted. You need to Odin to get it back.)
Moped Ryder uploaded a semi tweaked version of the stock 2.2 build. It's a zip that you can just flash using CWR:
http://forum.xda-developers.com/showthread.php?t=1674519
It comes rooted with busybox and some other goodies, but it's the stock kernel and whatnot. I'd highly recommend Fishman's Bionix-V Mod or Moped Ryder's Slim_Ryder ROMs if you're going to be on Froyo though. They're both great, but I went with Fishman's latest Bionix Mod since I couldn't get bluetooth to work on Moped Ryder's ROM. Which is really unfortunate because I loved Moped Ryder's otherwise.
And you don't have to Odin back to stock if you're just bouncing around Froyo or Eclair builds; only if you're coming from Gingerbread or ICS (2.3 or 4.0).
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Is your Samsung Vibrant (T959) Rooted.?
iwillkillyou said:
Keep us updated. I'm curious to see what worked. It's probably the gingerbread loaders. But, who knows.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
hi.. I tried again with flashing semaphore kernel through Odin installed CWM version higher than 2.5 to install ICS RC5 by nyx --sorry i need that soo badly so didnt checked anything else ..
@that time I was on vibrant 2.2 UVKB5 (stock)
NOT rooted
I didnt had so called
bootloaders
Click to expand...
Click to collapse
(i dunno what it means though--have to search )
BUT it didnt worked for me instead freezes at Vibrant start-up screen. So i Couldnt switch back to CWM. I Odin back to JFD with repartition clicked and my vibrant was locked (network lock). Finally, I got it cleared by application named Galaxy_S Unlock by Helroz from the market.
Now I am at the very beginning again. I am now on 2.1 JFD. I dont know WHY this happening to me .. :crying:
gonna try again with GB bootloaders.. BUT Im sick of failing and going back to 2.1 (my friends who are having captivate had no problem)
Speedy5150 said:
Is your Samsung Vibrant (T959) Rooted.?
Click to expand...
Click to collapse
At the time i was trying it was NOT rooted.. But now i have it rooted because i needed to unlock the network . which happened me for the very first time after flashing back to JFD using Odin..
Thank you guys for the links and thoughts on 2.2 ROMs.. I am not that expert . Thats why i was updating to 2.2 via KIES -- which is not a good idea as it seems with the ability 2 brick the device. I am going to get Bionix-V FishmanMod V4 FULL and install as http://forum.xda-developers.com/showthread.php?t=1441976 says..
It says Boot into clockwork recovery and i think i found something to do that in this thread http://forum.xda-developers.com/showthread.php?t=734164
I have to get ROM manager from market and go through it..
BUT Im damn upset with the RC5 ICS update by nyx being unable to installed into my device.. I will try with GB bootloaders flashed ..
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Woodrube said:
If you are going to go with Fish's ROM, then all you need to do is Odin back to JFD and pull the CWR from my signature and put it on your internal_sd and label it as Update.zip. Then boot into recovery and hit Reinstall Packages (might have to do this twice) and your stock recovery (blue) will go to CWR (green) and you can flash away.
Fish also has a Odin package that you can flash his ROM through Odin and not have to deal with CWR.
ROM Manager is no longer supporting 2.1, so if you do go back to JFD, then it will be hard to get RM. It is out there somewhere but really all you need is the Update.zip from above to do it. I suggest that you stay on Fish's ROM for awhile and read about ICS installs and all the little things that are involved. If you do flash Fish's ROM, you don't need to mess with the bootloaders.
Btw, aside from Kies, messing with Bootloaders is one of the sure fire ways to hardbrick your device. It only takes seconds to flash them, but do it wrong and, well you know.
Good luck and ask if you have any.
Click to expand...
Click to collapse
thanks alot for the info brother.. some guys told me STUPID.. but YOU guys are awesome.. I am a newbie to this flashing and stuff.. but learned a lot from XDA . Thanks again for the reply. now I have stock 2.1 with ROOT . (rooted cuz i had to unlock the vibrant). I will flash to Fish's 2.2 ROM soon. BTW may i ask you after moving to Fish's ROM and later if i need to move to ICS still can I do it without messing with Bootloaders..
Thank you
That is what we are here for in the Q&A/General sections.
Regaring your question about Gingerbread bootloaders being needed:::Yes and No.
Gingerbread bootloaders were required in the infancy of ICS ROMs bc they prevented what is called "Rainbows" in your clockwork where you couldn't see anything. The options were there but you just couldn't see them. Then as ICS evolved, the need for GB bl's lessened and now you don't need them at all.
But...There's always a but...Gingerbread bl's are recommended by most of the devs for ICS builds because they seem to work better with the custom recoveries that come with some of the kernels. There is more to it but in short, GB bl's are not required but recommended.
If you go to my ICS install guide, in the middle pages and more again at the end, Yosup (highly respected user) and I have a detailed conversation about bootloaders and their installation. Once he got over the fear and did it, he was hooked and flashing ICS ROMs weekly if not more. It is a very informative section of that thread.