Hi guys. I have a Vibrant with Axura 2.3.1 currently installed and I want to go to Trigger 2.8.1. Are the Axura and Trigger voodoo kernels compatible where I can just flash over Axura without disabling voodoo first or should I be Odin-ing back to stock first and then flash Trigger.
jockeyhollowjohn said:
Hi guys. I have a Vibrant with Axura 2.3.1 currently installed and I want to go to Trigger 2.8.1. Are the Axura and Trigger voodoo kernels compatible where I can just flash over Axura without disabling voodoo first or should I be Odin-ing back to stock first and then flash Trigger.
Click to expand...
Click to collapse
My understanding is that if you are going from one to another you do not have to disable it.
jockeyhollowjohn said:
Hi guys. I have a Vibrant with Axura 2.3.1 currently installed and I want to go to Trigger 2.8.1. Are the Axura and Trigger voodoo kernels compatible where I can just flash over Axura without disabling voodoo first or should I be Odin-ing back to stock first and then flash Trigger.[/QUOTE
you will be fine just flashing. just remember to make a nandroid backup of your rom first
Click to expand...
Click to collapse
Thus is covered in the noob guide. If going from voodoo to another voodoo enabled rom, you are good. Check out the install instructions to try and avoid any bugs. I just updated the noob guide.
Related
is it possible to have vibrant9 running with JAC's voodoo lagfix+OC and also have OCLF on it too?
sk8rboikelley said:
is it possible to have vibrant9 running with JAC's voodoo lagfix+OC and also have OCLF on it too?
Click to expand...
Click to collapse
Why would you want to have so many Lag fixes in first place?
Anywayz, to answer your question. there is nothing preventing you from running multiple LF's on your phone. Just be mindful on what you are doing with your phone and make a nandroid before you do all the LF's
I'm calling a To-Fu'd phone soon...
Just flash a froyo rom and leave the lag-fixes alone!
OK, so running Odex UVJL4 Voodoo Froyo Rom and I want to flash a new Rom Axura 2.2.5.9 Rom what is it going to take for me to flash this new Rom?
Do I need to uninstall Voodoo Lag Fix First and if so whats the best way to do that? And after thats done whats next? dont want to run into any issues! But I want that new Axura 2.2.5.9 Rom looks freaking awesome! Thanks for any help!
darkside79 said:
OK, so running Odex UVJL4 Voodoo Froyo Rom and I want to flash a new Rom Axura 2.2.5.9 Rom what is it going to take for me to flash this new Rom?
Do I need to uninstall Voodoo Lag Fix First and if so whats the best way to do that? And after thats done whats next? dont want to run into any issues! But I want that new Axura 2.2.5.9 Rom looks freaking awesome! Thanks for any help!
Click to expand...
Click to collapse
You don't necessarily need to disable voodoo if you go from a ROM with Voodoo 5.x enabled kernel to another ROM that utilizes Voodoo infused kernel. I've done it jumping from nero beta v3 with supercurio's jl4 kernel to nerov2+voodoo jl4 to nerov3+voodoo jl5. However, it is recommended to ODIN back to stock before jumping from ROM to ROM. It is also suggested to disable Voodoo just in case, I am just playing danger ranger
lqaddict said:
You don't necessarily need to disable voodoo if you go from a ROM with Voodoo 5.x enabled kernel to another ROM that utilizes Voodoo infused kernel. I've done it jumping from nero beta v3 with supercurio's jl4 kernel to nerov2+voodoo jl4 to nerov3+voodoo jl5. However, it is recommended to ODIN back to stock before jumping from ROM to ROM. It is also suggested to disable Voodoo just in case, I am just playing danger ranger
Click to expand...
Click to collapse
can I just disable voodoo then Flash the AXURA Vibrant Edition 2.2.5.9 Beast Rom
using Rom Manager.without to many problems? its a real pain odin back to stock!
thanks for any tips and help!
darkside79 said:
can I just disable voodoo then Flash the AXURA Vibrant Edition 2.2.5.9 Beast Rom
using Rom Manager.without to many problems? its a real pain odin back to stock!
thanks for any tips and help!
Click to expand...
Click to collapse
You can do that as well
EDIT: just remember to boot into CWR via the power menu and not from the ROM Manager
installed fine! its freaking awesome. lighting fast and no lag!
I am a bit new to the Android scene and I am currently using Team Whiskey's Bionix-v 1.2 with Voodoo lagfix enabled. Could I just flash the new Bionix-1.3 over top Bionix-v 1.2? Does Voodoo need to be disabled?
mohitd2000 said:
I am a bit new to the Android scene and I am currently using Team Whiskey's Bionix-v 1.2 with Voodoo lagfix enabled. Could I just flash the new Bionix-1.3 over top Bionix-v 1.2? Does Voodoo need to be disabled?
Click to expand...
Click to collapse
Yeah just flash it over....no need to disable VooDoo
Mr. Apocalypse said:
Yeah just flash it over....no need to disable VooDoo
Click to expand...
Click to collapse
I'm downloading it from here and I can also flash the Bionix-v 1.3 fix without any problems, right?
mohitd2000 said:
I'm downloading it from here and I can also flash the Bionix-v 1.3 fix without any problems, right?
Click to expand...
Click to collapse
Yeah you're supposes to download it from there....flash Bionix-V 1.3....let it boot and sit for a few mins...then reboot into CWM and flash the fix.....you don't need to disable VooDoo...you should be fine...good luck
I flashed 1.3 over 1.2.1. Let it sit as recommended, rebooted, then flashed fix. Let that sit for a bit. Then reinstalled apps.
So far, no problems.
Mel
Sent via Bionix-powered Vibrant
As many of you might see, I am still on DJ05 or 2.1. It's been running great all this time, but I'm seeing way too many apps that are only meant for 2.2 that I really want to try. So I was wondering, can I flash a Voodoo Froyo Rom over my Voodoo DJ05? That is, after I flash the modem of course.
Anyone?
As long as you wipe everything yes
http://forum.xda-developers.com/showpost.php?p=11255539&postcount=5
Whole Thread (http://forum.xda-developers.com/showthread.php?t=948722)
I am running a stock 2.1-update1 TMO Vibrant.
I have previously run Obsidian and also some team whisky axura flavor, before going back to stock 2.2.
I had stock 2.2 until I tried to flash the newest overstock kernal last night and bricked my phone.
I had a stock 2.1 recovery laying around, so long story short I am now at 2.1 stock.
I would really like to flash the latest overstock along with a good ROM but am not sure if I should be doing it from 2.1 or if I should kies up to 2.2 and then start.
Also, this whole red CWMR thing has me thoroughly confused. Where is this mysticl red lockworkmod and how do I flash it?
I was thinking Bionix-X for my new rom, but would appreciatte some feedback or other suggestions from the community on what roms are 'best'.
Thanks for any assistance, I appreciatte all info.
baywatch said:
I am running a stock 2.1-update1 TMO Vibrant.
I have previously run Obsidian and also some team whisky axura flavor, before going back to stock 2.2.
I had stock 2.2 until I tried to flash the newest overstock kernal last night and bricked my phone.
I had a stock 2.1 recovery laying around, so long story short I am now at 2.1 stock.
I would really like to flash the latest overstock along with a good ROM but am not sure if I should be doing it from 2.1 or if I should kies up to 2.2 and then start.
Also, this whole red CWMR thing has me thoroughly confused. Where is this mysticl red lockworkmod and how do I flash it?
I was thinking Bionix-X for my new rom, but would appreciatte some feedback or other suggestions from the community on what roms are 'best'.
Thanks for any assistance, I appreciatte all info.
Click to expand...
Click to collapse
Hi, ok...lets clear some stuff first:
1. The red CWM Recovery means its a VooDoo injected kernel....almost all custom ROMs and kernels have VooDoo in it so it will be red.
2. The easiest way is to upgrade to a 2.2 ROM and get the Overstock kernel is to go back to stock 2.1 (which i see you've done already) re-root....DL ROM Manager and flash CWM recovery (which will be green at first), then DL the 2.2 ROM you want, like Bionix-V 1.3.1 and put it on your sd card and flash it.....like i said almost all custom ROMs come with a red VooDoo CWM recovery....so after you flash it....it'll be red....then you can continue to flash Overstock..
Thank you for such a concise (and quick!) response, greatly appreciatted.
Or just flash malice which comes with overstock
Sent from my GT-I9000 using XDA Premium App