Related
http://forum.xda-developers.com/showthread.php?t=991276&highlight=http://forum.xda-developers.com/+V6+SuperCharger!
http://forum.xda-developers.com/showthread.php?t=991276&highlight=[Script]+V6+SuperCharger!+HTK+%26amp%3B+BulletProof+Launchers!
I know quite a few roms that use this script.. That run awesome!!
I was hoping that more roms here would make use of it.
OmegaRED^ said:
http://forum.xda-developers.com/showthread.php?t=991276&highlight=http://forum.xda-developers.com/+V6+SuperCharger!
http://forum.xda-developers.com/showthread.php?t=991276&highlight=[Script]+V6+SuperCharger!+HTK+%26amp%3B+BulletProof+Launchers!
I know quite a few roms that use this script.. That run awesome!!
I was hoping that more roms here would make use of it.
Click to expand...
Click to collapse
I do use this script, and I can say that it is a success!
1.0.2 Using the MiniCM6 Nobodyatall!
One of the best roms in Big X10 xda land "Wolfbreaks" uses this.
I hope the roms here start using it... It rapes!
I must say.. this is works very well on my mini with MiniCM 2.0.5 GingerBread
Before: Active launcher and Zeam launcher is redraw everytime I finish to play NFS Shift or even after I open Application manager
After: No redraw (Active Launcher and Zeam) when finished playing Angry Birds, NFS Shift and other RAM eater games
Great ..
So I tried this script, and now my launcher is hard to kill / supercharged
but then after reboot it still says my launcher is hard to kill, but also that my prior minfrees don't match my current minfrees.
it then shows my curent minfrees as the default minfrees and the prior as what i selected. is that supposed to happen?
I mean exactly as the screenshot moedjs posted
like isn't it supposed to set current minfrees to what i selected, and not to default?
moedjs said:
I must say.. this is works very well on my mini with MiniCM 2.0.5 GingerBread
Before: Active launcher and Zeam launcher is redraw everytime I finish to play NFS Shift or even after I open Application manager
After: No redraw (Active Launcher and Zeam) when finished playing Angry Birds, NFS Shift and other RAM eater games
Great ..
Click to expand...
Click to collapse
Exactly.. makes multi tasking rock.. keeps the memory free, locks in the home app.
It works badass!
I did not understand the installation
ops , I did find a help, sorry
hey guys, does this works in SE android firmware 2.1?
Another question, in a tutorial it says :
P.S. When Installing Programs, MAKE SURE Script Manager are installed on PHONE and NOT in the MicroSD Card!
I have app2sd installed already , how can I do this? thanks
can someone who tried this give his values and his results?
sounds like a great tool
thnx in advance
I have the same problem as Carpe-Dimi above regarding new minfrees not sticking after reboot, although the Launcher is "Hard to kill".
I used option 6 in the script set up.
I followed help file advice to have Script Manager run /system/etc/init.d/99SuperCharger "at boot" and "as root" but problem persists.
Otherwise seems to work fine at keeping launcher in memory. I don't see any boost in Quadrant Score... or any other noticeable improvements to be honest.
MiniCM 7 is pretty good as it is
Any advice on settings or getting minfrees to stick?
Anyone know if it works on mini pro?
That number 1-17 is best for my phone?
alanllew said:
I have the same problem as Carpe-Dimi above regarding new minfrees not sticking after reboot, although the Launcher is "Hard to kill".
I used option 6 in the script set up.
I followed help file advice to have Script Manager run /system/etc/init.d/99SuperCharger "at boot" and "as root" but problem persists.
Otherwise seems to work fine at keeping launcher in memory. I don't see any boost in Quadrant Score... or any other noticeable improvements to be honest.
MiniCM 7 is pretty good as it is
Any advice on settings or getting minfrees to stick?
Click to expand...
Click to collapse
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
that's just a theory tho, since I can't edit the ramdisk file as I dunno how to set the permissions back when unpacking and repacking ramdisk.tar but I'll get back when I find out.
as for the launcher being bulletproof, that definately makes the home button respond a lot faster ^^
Carpe-Dimi said:
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
that's just a theory tho, since I can't edit the ramdisk file as I dunno how to set the permissions back when unpacking and repacking ramdisk.tar but I'll get back when I find out.
as for the launcher being bulletproof, that definately makes the home button respond a lot faster ^^
Click to expand...
Click to collapse
Somewhere in the original post it says that in some Custom Roms the minfrees won't stay after reboot so you HAVE TO select 'run at boot' for it to stay.
edit: From original post:
Note: For some reason, the minfree levels do not stick on some Custom ROMs. I don't know why this is. Maybe a bug in GingerBread?
........ You can check /res/user.log to see if it ran...
........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"
And I also have a question(just like the one 2 above)
What is the best one to choose (1-17)?
ThankYou
I tried:
'........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"'
and still could not get values to stick
Has anyone else tried this and had more luck?
how do you install this.. i could not understand
Carpe-Dimi said:
there are config files in the ramdisk.tar (can't remember name atm, but they are init.rc files) that have lines regarding the setting of ram optimizations.
however. these are definatley meant to do the same as the script, but the values in them don't correspond to the ones the script readsout, so I'm thinking another script runs on top of that which overrides those values again.
Click to expand...
Click to collapse
u r correct...the memory free settings are modified by some file not located in ram disk...i have examined the init.rc files and ramdisk settings are quiet different form the one that is set in the roms during runtime
now only if v knew what that file was!!!
The values are not equal with me, but I noticed a big improvement!
I am using the following values in the original 6,8,16,20,22,60 MiniCM6 Froyo!
It must have some kind of file it impossible values are equal, but it works it works!
I have done for mine and is awesome...
DareDan said:
I have done for mine and is awesome...
Click to expand...
Click to collapse
which values did you use?
please delete this post sorry
Hi people,i give you my tips for your MIUI rom.
-------------------
Datadrop:
-----
I edit this topic,
cause lot of People
have confusion with it
This setting solve only the signal lost
caused by signal reset,
due to new carrier operator network
(4G lte) but not for 3g 2g switch.
sorry for not explain before.
go in build.prop
Verify if this line is correct just in case
ro.product.model=X10
ro.product.brand=SEMC
After that replace
hsxpa=1 by =3
1,drop come in 30min
2,drop come in 3 day but
reconnect After few minutes but stay on 3G switch
3 no drop for now,
or reconnect perfect on H
Problem solved
I suggest to add this line
keyguard.no_require_sim=true
ro.ril.hep=1
ro.ril.hsdpa.category=8<1...
ro.ril.hsupa.category=5<1...
But this line cause problem to switch off data on miui 1.8.12
then if you have that,
just remove ro.ril line
and reboot
go xrec and clear dalvik cache
And set 3Gonly in network setting
But not necessary
chose plan you like
-------------------------
Zdzihu.oc:
you need file that you find in this topic
forum.xda-developers.com/showthread.php?t=1223027
Pfff can't put link correctly I'm on my phone and reduce xda app just copy it,I'm not familiar with that. sorry lol
------------------
1
Put in,
system,lib,modules.
zdzihu.oc.ko
tun.ko
cpufreq_smartass2.ko
cpufreq_interactive.ko
cpufreq_minmax.ko
smartass_zmod.ko
And give permission.
File needed for OC is
tun.ko and zdzihu_oc.ko,
another is for governor but work fine with default governor and for sure
keep at boot :-},
but sometimes when phone go to sleep,then it switch to 998.
just go in widget cpumaster
and set it again.
it's cool cause your battery have more life.
I said just sometime,all the time it stay with 1113 and sleep at 245 so totally normal deepsleep ;-)
---------------------
2
go in
system,etc,ini.d,then open 60tripnraver script and put this at the end,just quote it
## zdzihu: "stuck at 1GHz" workaround
echo 100000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate;
## zdzihu: modules
insmod /system/lib/modules/tun.ko
insmod /system/lib/modules/zdzihu_oc.ko
insmod /system/lib/modules/cpufreq_smartass2.ko
insmod /system/lib/modules/cpufreq_interactive.ko
insmod /system/lib/modules/cpufreq_minmax.ko
insmod /system/lib/modules/smartass_zmod.ko;
All modules you see in,you need to have it for governor
but if don't want all gov then remove modules gov line you not
want or have
Reboot,go xrec,wipe cache,dalvik
Reboot
Use cpumaster widget
for set gov and frequency
If you not have tripscript then find in your miui rom tread what is the file do script at boot
-------------------------
Chargemon and home tweak:
Just add this line in build.prop
debug.sf.hw=1
video.accelerate.hw=1
persist.chargemon.active=1
Ad this between media
# fix for screen redraw lag
ro.HOME_APP_ADJ=-1
#
--------------------------
Bug and bootanimation:
Remove in
system,etc,ini.d,10defaulttheme
if you have it.
This file cause trouble and bug in theme choice and not sure but for me slow the system
Remove in system,media,bootanimation and replace by the bootanim you want
then reboot
go xrec,clear dalvik cache
fix permission,reboot
first boot give some trouble but after it ok
-------------------
I can't give you this before cause i have some trouble in my life and need to go hospital.
but god seem to give me some time again and it ok for now.
so sometime i give you some way but not clear sorry for that.
Miuimusic:
it my original tips see cobrato tread.
Go in equalizer and set it on none then disable it
now freeze gone
For music bug stop And problem you need a file in CM7 that is
libcyanogen-dsp.so
and put it in system,lib,soundfx and give permission
you need DSPmanager in
system,app
I see some pepole want another sms and phone app but have bug,so keep in mind that objective by miui team is give you a rom with all in it and no need anything,but you could try to go phone option and you find,allow 3rd phone apli,then try to set one and see if help but I'm not sure for that.
So time to thank
tripnraver
for
his unfinished buggy rom :-D but sweat and all need in it if you have brain and eyes. lol.
Mine is iris102,miui.1.8.12 and trust me with all tips here it's very fast and all stuff work perfect.
Zdzihu
For module and oc and lot more
And all xda members fot script and module and more.
Ps.i can't attach file cause no internethome just find it in this section and no custom kernel need for all
And be cool with me if you know this or that cause i just want to help
Respect.
Very well, thanks for sharing... MiUi is the ****... lol
Will try this . Thanks.
awesome!!
thank you!!
best regards
chris
Sent from my X10i using XDA App
Merci beaucoup mec!! C'est tres utile! ^^
(thanks a lot its very useful!)
Ok thank happy to help you guys
Another tips for devtool and crash server,
you need to keep devtool from cm7 by z and put in system,app,give permission,reboot
now you could crash server correctly
For server miui security use this
*#*#2432546#*#*
A pop appears to confirm
Miui for ever
x10Miui
I noticed alot of this is already done in erenz 1.9.16. All the governor module stuff is over my head and hard to understand Im using dooms v5 unlocked BL. Bo offense but the language is not easy to understand.
What does persist.chargemon.active=1 do? It was not in my build prop.
Bugly Astard said:
I noticed alot of this is already done in erenz 1.9.16. All the governor module stuff is over my head and hard to understand Im using dooms v5 unlocked BL. Bo offense but the language is not easy to understand.
What does persist.chargemon.active=1 do? It was not in my build prop.
Click to expand...
Click to collapse
If dev include it in your rom then you can charge your phone when it off and no need oc stuff if you on custom kernel just datadrop solution if you have it
Sorry for language but I'm french and it hard to explain technical things in English
I edit OP cause i write it with bad
Font
now i think it's more clear
x10Miui,trip102,v1.8.12
Another tips
When you switch battery animation to linear,
your 2d performance drop down quadrant score and slow your phone.
Why? I don't know :-D
x10Miui,trip102,v1.8.12
kaosdroid said:
If dev include it in your rom then you can charge your phone when it off and no need oc stuff if you on custom kernel just datadrop solution if you have it
Sorry for language but I'm french and it hard to explain technical things in English
I edit OP cause i write it with bad
Font
now i think it's more clear
x10Miui,trip102,v1.8.12
Click to expand...
Click to collapse
Thanks for clearing that up, perfect answer! I wasnt bad talking your post I understand people speak different languages, nice post and thanks again! I wish I could speak french I failed it in highschool
as far as i know there should be no need of this:
Code:
persist.chargemon.active=1
as chargemon is explicitly called during booting
DooMLoRD said:
as far as i know there should be no need of this:
Code:
persist.chargemon.active=1
as chargemon is explicitly called during booting
Click to expand...
Click to collapse
Not in trip miui it off by default or gone and you cannot charge when phone off and lot of people ask for that even me,so if you delete it or off then phone start when plug cable. Voila sir
x10Miui,trip102,v1.8.12
I edit OP for data drop
Another tips for SFR user if you have bad conection and limited data then switch your apn to wap and you have good speed and no limitations plan ^^ another strange money Fπ€K by sfr ÷_÷
x10Miui,trip102,v1.8.12
kaosdroid said:
Not in trip miui it off by default or gone and you cannot charge when phone off and lot of people ask for that even me,so if you delete it or off then phone start when plug cable. Voila sir
x10Miui,trip102,v1.8.12
Click to expand...
Click to collapse
well thats just plain weird... offline charging is fairly easy... just move the /system/bin/charger command to the beginning of chargemon file... that should fix offline charging...
The data fix mentioned here, does it solve the changing between 2g/3g disconnect problem or simply restrict the data to 3g only (and reconnect to 3g only when it's lost).
Thanks
porksome said:
The data fix mentioned here, does it solve the changing between 2g/3g disconnect problem or simply restrict the data to 3g only (and reconnect to 3g only when it's lost).
with hsxpa=3 reconnect perfect on H or E or 3G no lost signal now and you can chose your data plan,onlyE,only3g,Eand3g,
x10Miui,trip102,v1.8.12
Click to expand...
Click to collapse
DooMLoRD said:
well thats just plain weird... offline charging is fairly easy... just move the /system/bin/charger command to the beginning of chargemon file... that should fix offline charging...
Click to expand...
Click to collapse
You right but it's not a fix or bug,and this command is in right place,but on TRIPMIUI rom trip disable it in the build.prop by this line.but on few version it be gone.so for enable it with no command just ad this line for,and most people doesn't know command
But i have a question for you,
on my miui the leds between back and menu is disable,
but i can't find the command or file that execute this.
if you can help it's cool cause the leds stay on when i switch brightness mode
and trip command are not easy to find or change cause I'm noob command :-D
Thanks
x10Miui,trip102,v1.8.12
how many people here use the V6 Supercharger Script with their Streak?
I'm having trouble with it and was hoping other more adept streakers know what the hell is going on with mine...
so I've run probably every script since the first one, but, it turns out the instructions I got weren't as complete as they could have been, and inadvertantly, I ran the scripts as the .txt and .pdf file formats that they came in.
I also saw a tutroial that involved changing a file name using root explorer, which I also never did.
i also did this for the 3G and kernelizer tweaks aswell
so now I have the latest script version and I notice that it's not working, I have no idea how long ago it stopped...
what I would like to know is:
A: how to totally clean all of it from my system, in order to start a totally fresh install.
B: how to properly install all three of the the scripts on the streak.
anybody nice enough to help me?
I use it...since version 8.
I use the latest version, along with the 3g & kick ass kernal tweak.
I use option 6, multitasking, 512 leaded.
Drop in here>> http://forum.xda-developers.com/showthread.php?t=991276 I'll bet someone can help you.
I've tried following all the instructions, even some from other tutorials, I've un supercharged and started from scratch.
how did you make yours stick?
bugmenotacc said:
how many people here use the V6 Supercharger Script with their Streak?
I'm having trouble with it and was hoping other more adept streakers know what the hell is going on with mine...
so I've run probably every script since the first one, but, it turns out the instructions I got weren't as complete as they could have been, and inadvertantly, I ran the scripts as the .txt and .pdf file formats that they came in.
I also saw a tutroial that involved changing a file name using root explorer, which I also never did.
i also did this for the 3G and kernelizer tweaks aswell
so now I have the latest script version and I notice that it's not working, I have no idea how long ago it stopped...
what I would like to know is:
A: how to totally clean all of it from my system, in order to start a totally fresh install.
B: how to properly install all three of the the scripts on the streak.
anybody nice enough to help me?
Click to expand...
Click to collapse
It has been made very clear by some of the senior developers here that V6 does not work on the Streaks because of some type of conflict with how the memory is allocated or configured or something, that's one of the reasons that it isn't implemented into the ROMs... so it's just snake oil, a placebo for a Streak owner. I'm not saying it doesn't work on other devices, but it DOES NOT work on the Streak
Is there a post by a dev anywhere that explains it?
Will AutoKiller Memory Optimizer work? It must this device that it doesn't work on... the minfree file disappears or something
zeppelinrox said:
Is there a post by a dev anywhere that explains it?
Will AutoKiller Memory Optimizer work? It must this device that it doesn't work on... the minfree file disappears or something
Click to expand...
Click to collapse
Yeah, but for the life of me I can't remember exactly where but what I wanna lean towards it being in fards' GingerStreak thread
I'll try and find it...
BUT the newest version does put ALL the supercharging in init.rc...
A dev just has to put it in their boot.img
zeppelinrox said:
Is there a post by a dev anywhere that explains it?
Will AutoKiller Memory Optimizer work? It must this device that it doesn't work on... the minfree file disappears or something
Click to expand...
Click to collapse
I used to have it installed but I couldn't see where it was ahving any effect or benefits so I uninstalled
I see that the post has been removed, but I need the lines to activate the script in terminal and to eliminate everything that was installed for the cell phone has become very slow, if anyone knows the commands I could say or how to remove complete script
su
engengis
Then select uninstall
AOKP 4 LYF
tazlooney89 said:
I see that the post has been removed, but I need the lines to activate the script in terminal and to eliminate everything that was installed for the cell phone has become very slow, if anyone knows the commands I could say or how to remove complete script
Click to expand...
Click to collapse
Why do you want to remove "Engengis"...? This script engine is far superior to anything (script wise) available on XDA & it's stable... Your problem is the options that you chose at setup...
Stay Breezy n Be Lucky...
Pe"ACE"...
[UPDATE FOR JB.15][Custom Build Prop] Increase Performance & Battery Life of PRIME
MAJOR UPDATE: U.S. & WW. MODDED BUILD.PROP FOR NEW. 15 JELLYBEAN RELEASE ADDED. here are edited build.prop files for both the US & WW 10.4.2.15 Jelly Bean. Tweaks are listed as to what they are within the build.prop and to install just copy over using Root Explorer or similar app and then ensure permissions are set correctly. MUCH LOVE AND THANKX GO TO MR.WOOKIE FOR THIS and his constant contributions to making the prime a better device to own. I know I haven't been around as much as I don't own a prime anymore. But I can continue to update this thread as needed. Its very important that if issues arise, PLEASE TRY TO HELP ONE ANOTHER OUT. I can try to help out when I can. As always, make sure to set permissions correctly. JB build.prop Modding should be no different than previous versions. so most of the instructions in this OP/thread still apply. please post up how this mods are working for you on new JB firmware. if you notice any particular mod or line is causing problems with JB, please let us know. so it can be modified again. HAVE FUN...PRIME WILL ALWAYS BE HOME FOR ME
With the permission of the Original Developer, Seanzscreams, we bring a modified version of his mod for the 300 that now works on the Prime also. This is a custom modified build prop, that Brings Overall Performance & Battery life Improvements to the Transformer Prime. This will make your device feel more snappy and responsive overall. It should improve battery life. Other performance tweaks also will improve everyday use of Prime.Your device has to be on the latest U.S. .21 or U.S..28 firmware and rooted. If you on a ww version or other, you may need to tweak the build.prop to reflect your region version. Take a look inside the modded build.prop & see before you try it out. If you know how to edit it, give it a shot. just make sure to back up your original build.prop. If unsure, hit the link & ask the developer. It is possible to not be rooted and push this through ADB but being rooted makes it ALOT easier.
UPDATE: U.S. & WW .28 MODDED BUILD.PROP ADDED. EVERYTHING EXCEPT power collapse & wifi scanning added. some users reported issues that could be linked. same instructions on implementing this. MAKE SURE TO MAKE BACKUP OF YOUR ORIGINAL FILE. MIGHT BE BEST TO SEND IT TO SOMEPLACE OUTSIDE INTERNAL MEMORY OF PRIME. JUST TO BE ON THE SAFE SIDE.
*Users on region versions other than the US .21 or U.S. .28, read the tips at the end of this post before you attempt this. Putting this US version of build.prop in your device can cause issues if not properly edited to reflect your region.
*If you running Androwoki rom, no need to apply this tweak. the developer already added these tweaks to his ROM/build.prop.
-UPDATE: fellow member Mekrel made a .21 WW version of this for those who wish to try out. or you go the other route like mentioned in this post. the WW version is attached to this thread also.
Thanks to Hairdex for making a making a version for people running Team EOS Cornerstone build #9. only those on build #9 can use it.
-added De .21 version also
PLEASE READ IMPORTANT INFO & TIPS AT THE BOTTOM OF THIS POST IN CASE ANY POSSIBLE ISSUES ARISE.
Method described below is for rooted users as I don't really know how to do it the stock(not rooted) method through ADB. You can go to original thread and ask developer on how to push it through ADB method
Quote from developer, Seanzscreams:
" This is a modified build.prop to include all the latest ics tweaks
(from a build.prop standpoint)
forced 60fps
faster wifi connect and suplicant scan set at 100 (battery saver as well)
added deep sleep mode
added screen dithering
removed checkin back to base
kernel tweaked
dalvik mins and max set higher than stock
increased over-all fling velocity min and max now set
min at 8000 and max at 12000
a few nvidia specific graphics tweaks as well
. power collapse disable enabled
-and just a few i dont feel like explaining google is your friend"
Link to his original thread: http://forum.xda-developers.com/showthread.php?t=1641219
DISCLAIMER: I nor the original developer take responsibility if you don't follow instructions or researched first. USE AT YOUR OWN RISK. It should be a fast n simple mod. Works great on my prime. If you run into issues, we will help you the best we can. Please read the important info & tips at the bottom of this post. It could eliminate possible issues from arising.
USE ROOT EXPLORER:
this modded build.prop, which is attached to this thread, goes in /system. Make sure to back up your original build prop or add .bak to the end of it(.bak). I sent a copy of my original file to my drop box. just an extra safety precaution... You will need to change root explorer to mount as RW. after you back up the original file, paste the new modded build prop into /system. then long click on it and press permissions. the permissions need to be exactly like the original file. which is rw-r--r-- after you properly set the permissions, change root explorer back to Read only. then power down and reboot, then profit. You can reboot twice to make sure everything sticks, if you want. If you don't notice anything initially, let it cache(kind of like letting a car warm up before you drive off) just like with roms. just start using tab so it can cache.
CLARIFICATION ON SETTING PERMISSIONS IF UNSURE. your permissions for this mod build.prop should look like this: rw-r--r--
...........Read. Write
Owner. X .......... X
Group. X
Others. X
I would suggest before even applying this, open the mod build prop up in root explorer. then just take a look at it all. Then cross reference the new tweak lines added with the links I will provide now. These links show all the build prop tweaks and what they do. This is to get a better understanding of what will be improved on your device Performance & Battery Savings wise. It won't hurt for you to become more familiar with what the different lines do and it might eliminate some questions concerning what each does.
http://forum.xda-developers.com/showthread.php?t=1639104
http://forum.xda-developers.com/showthread.php?t=1510652
EXAMPLES OF SOME OF THE TWEAKS SEEN IN THIS MODDED BUILD.PROP & WHAT THEY DO OR AFFECT: Thankx to TheFrankenstain & H M Judge threads for Reference
- Allows the tablet to sleep better: This setting puts your tablet into a deeper sleep when on standby
ro.ril.disable.power.collapse=1
- Allows your wifi to scan less frequently, saving more battery
wifi.supplicant_scan_interval=100
- Increase overall touch responsiveness
debug.performance.tuning=1
video.accelerate.hw=1
-Increases Scrolling responsiveness
windowsmgr.max_events_per_sec=300
- Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
-Increases quality of photo/Increases the memory cap when decoding JPEGs
ro.media.dec.jpeg.memcap=8000000
-Raises quality of JPEG images: makes JPEG Higher Quality
ro.media.enc.jpeg.quality=100
-Enable Surface dithering:Improves image quality
persist.sys.use_dithering=1
-System tweaks:
Change the Dalvik VM heap size
-dalvik.vm.heapsize=256m
-dalvik.vm.startheapsize = 8м
-makes apps load faster and frees more ram.
dalvik.vm.dexopt-flags=m=y
-Use Jit (Dalvik just-in-time compiler): faster better caching system
dalvik.vm.execution-mode=int:jit
-Disable error checking (Should speed things up a bit)
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
this has been running great for me so far. battery life seems improved and the responsiveness of the touch screen is unbelievable. it scrolls so fast n fluid it crazy. this is with the regular UI & within browsers. It also increases quality of your JPEG pictures. Im really impressed with it so far.
Do note though, once OTA update comes, it will knock all this out and a new custom build prop will have to be made. this is even if you accept the new OTA.
I will keep this thread updated to stay current with the developers original thread. As new updates come out, he will be modifying the newer build props within the update. So I will add those here as they come.
Make sure to click on the developer, Seanzscreams, original thread(http://forum.xda-developers.com/showthread.php?t=1641219) and give him thanks. You can leave feedback in this thread and original thread, if you wish. Feedback is encouraged as it will lead to better future results on this mod.
THANKS TO: Seanzscreams for Modding my Prime build prop. Now we have this MOD available to all prime owners on latest .21 firmware and rooted.
Attached to this post is a zip file with the custom build prop inside of it. The U.S. and WW version
*IMPORTANT:
If you come across a difficulty, you can ask in this thread or even better would be to ask in the developer original thread. He would know more on possible issues that may arise.
If you run into issues or caught in a bootloop or something here is how to use adb and push back your original build.prop file: Thanks to Mekrel
in regards to being for locked/unlocked users, I posted two sets of commands. Technically three scenarios exist:
Being locked
If you're locked, you're not going to have any third party kernel installed and therefore WILL have a secure kernel and therefore not able to push files to /system. That's why you need the command that involves pushing to the /sdcard and then using su via shell to copy from the /sdcard and then to /system.
Unlocked but with a kernel installed that's still secure
As above
Unlocked but with a kernel installed that's insecure
You can push directly to /system, so you don't have to push to the /sdcard first
If you're unlocked you're going to be running a secure kernel which means you're not going to be able to run adb as root, so even with root and the /system partition mount as r/w; you're not going to be able to push to system:
Code:
adb shell
su
mount -o remount,rw -t ext4 /dev/block/mmcblk0p1 /system
exit
exit
adb push build.prop /sdcard/
adb shell
su
cp /sdcard/build.prop /system
chmod 644 /system/build.prop
rm /sdcard/build.prop
exit
exit
Unlocked and with an insecure kernel:
Code:
adb shell
su
mount -o remount,rw -t ext4 /dev/block/mmcblk0p1 /system
exit
exit
adb push build.prop /system
adb shell
su
chmod 644 /system/build.prop
exit
exit
In regards to remounting to read only once finished, you don't have to as you can simply reboot and the commands executed in ramdisk will remount every partition with the relevant flags. Or you could:
Code:
adb shell
su
mount -o remount,ro -t ext4 /dev/block/mmcblk0p1 /system
exit
exit
you should be good to go after this.
*TIPS for users that are not on US .21 but instead on a WW or other version: thnkx to Buxtahuda & Gage_Hero
- instead of editing this build.prop with your information, edit your build.prop with any missing lines from this one. That's going to cut down on error a lot, and even if you get the right characters and spacing, the build.prop can be finnicky as all hell.
- IF you edit the build.prop use the right tool which would be notepad++ (download) not the standard windows note pad. if you use the standard windows notepad you could end up with format and character issues
*CAUTION:
We had a user who was unlocked, boot to a black screen. He got his prime back running by doing a restore from recovery. For unlocked users who want to try this, make sure to do a full backup, including the original build.prop file. Unlock users could even edit their own build.prop & add the lines one by one until it breaks. You can download notepad + yes it is +(plus). then you can edit the build prop (properly with out screwing up the format) on the pc and move it to the tablet. I'm not sure if being unlocked conflicts with this mod. just make sure you on latest .21 or .28 firmware and rooted. Then follow instructions carefully. you can even click on the original developer link for assurance on how to install if unsure how to install or if you have any possible conflicting issues. It would be best to ask developer if this is safe for unlocked users also. Unlocked users should proceed with caution and make sure you will be OK using this.
update:Developer said being unlocked shouldn't matter. I'm still waiting to hear back on what if people are on a different version like WW or something.
You can feel free to Hit my Thanks also, if you want. For putting this guide together on my Prime solely. The Prime is my PC Make sure to give feedback here & to OG developer, Seanzscreamz and his OG thread http://forum.xda-developers.com/showthread.php?t=1641219 . He made this all work for our Primes when he didn't have to. Much thanks to him & other members who contributed critical info, tips, & feedback.
Thanks to Texstar & Andromorphone for editing U.S. .28 buildprop.
That is the one I am looking for so long. Thanks for sharing.
Sent from my HTC Desire HD using xda premium
Could you please explain how to do this without root?
okay okay.. I will try it and report back
1SiK1500 said:
Could you please explain how to do this without root?
Click to expand...
Click to collapse
you actually dont need root
but this is way easier if you do
you could adb push /system/build.prop
or you could just paste it into root explorer replacing your existing
(back up existing or rename it to build.prop.bak just for safe keeping )
then reboot
or
when it reboots and adb comes alive you may be able to push it to /system with: adb push build.prop /system
not really much more was explained. you can click on his original thread link to get more details or ask him about it. most seem to be doing this the rooted method. I haven't seen anyone confirm doing this adb way yet.
I get an error..
"There was not enough free disk space to complete the paste operation" when I tried to paste this into /system with the original .bak there
I had to remove the original file to make room
Also, I think you better expand on what -RW, -R, -R means for people - like exactly what boxes to check and uncheck
I forgot to add:
If you don't notice anything initially, let it cache(kind of like letting a car warm up before you drive off) just like with roms. just start using tab so it can cache. it'll take to the changes.
Lock-N-Load said:
I get an error..
"There was not enough free disk space to complete the paste operation" when I tried to paste this into /system with the original .bak there
I had to remove the original file to make room
Click to expand...
Click to collapse
that's strange. I still have my original file in there renamed. I never got that error. Do you still have all those modded wifi files in there also?
edit: I saw the other part you added, I gotcha
demandarin said:
that's strange. I still have my original file in there renamed. I never got that error. Do you still have all those modded wifi files in there also?
edit: I saw the other part you added, I gotcha
Click to expand...
Click to collapse
Yes I do in /bin which is in /system - suppose i should delete those.
But this implies /system looks for and checks the size of that directory and pukes if it is beyond xx size - which is kind of interesting
Also, technically speaking, aren't permissions rw-r--r-- not -RW, -R, -R
Well, I did this and it just goes to a black screen and does nothing else.
How can I get back into the system and restore the old file?
Lock-N-Load said:
Yes I do in /bin which is in /system - suppose i should delete those.
But this implies /system looks for and checks the size of that directory and pukes if it is beyond xx size - which is kind of interesting
Also, technically speaking, aren't permissions rw-r--r-- not -RW, -R, -R
Click to expand...
Click to collapse
I edited OP to reflect that.
acdcking12345 said:
Well, I did this and it just goes to a black screen and does nothing else.
How can I get back into the system and restore the old file?
Click to expand...
Click to collapse
were you rooted and on .21 firmware?
did you put the modded file into /system & set its permissions to rw-r--r--? & rename the old file? so it won't be confused with 2 files try to be activated.
demandarin said:
I edited OP to reflect that.
were you rooted and on .21 firmware?
did you put the modded file into /system & set its permissions to rw-r--r--? & rename the old file? so it won't be confused with 2 files try to be activated.
Click to expand...
Click to collapse
I did exactly that..It was also unlocked...
Not sure how to go back to the old file..
Works great! Wow I can see a big speed difference! I can't wait to see how much longer the battery lasts.. Thanks man!
Sent from my Transformer Prime TF201 using XDA Premium App
jjdevega said:
Works great! Wow I can see a big speed difference! I can't wait to see how much longer the battery lasts.. Thanks man!
Sent from my Transformer Prime TF201 using XDA Premium App
Click to expand...
Click to collapse
you see changes that quick?? guess I will test mine more tonight.
my install went fine and reboot went fine.
I believe in this mod type as I did similar mods to my OG Droid
Lock-N-Load said:
you see changes that quick?? guess I will test mine more tonight.
my install went fine and reboot went fine.
I believe in this mod type as I did similar mods to my OG Droid
Click to expand...
Click to collapse
Surprisingly did. I didn't think I would see much of a difference that quick. As soon as it rebooted and right after the lock screen swiping was fast and opening closing apps are much quicker load times
Edit: overall loading speeds are improved quite a bit
Sent from my Transformer Prime TF201 using XDA Premium App
At work and don't have my Prime with me at the moment.
I will try tonight and report to you guys.
Good to hear positive feedback.
acdcking12345 said:
I did exactly that..It was also unlocked...
Not sure how to go back to the old file..
Click to expand...
Click to collapse
I'm wondering if being unlocked messes with things. Did you make a backup of your original file? if so. you can try to adb push it in there. you should go to original developer thread and post this up. As I'm not exactly sure on the adb method on getting the prime to use the original file.
ill make sure to add to the OP that being unlocked may conflict with this. As this is the only difference between yours n mines.
so you rebooting and it just went to a black screen? any Asus logo or anything? can you get into recovery and reflash your rom or restore a backup?
Anyone with insight into how he get back using the old file from state he is in now?
I don't see a wifi scan interval on either the original or this build prop. That was one I changed from 30 seconds to 100 on my phone to cut down on the power used by wifi to go out and ping and search for signals.
On my phone is it wifi.supplicant_scan_interval = 30
A bit surprised this does not exist as it can be a good battery saver
I also see some telephony stuff in this prop that seems of no value as we dont have phones
demandarin said:
I'm wondering if being unlocked messes with things. Did you make a backup of your original file? if so. you can try to adb push it in there. you should go to original developer thread and post this up. As I'm not exactly sure on the adb method on getting the prime to use the original file.
ill make sure to add to the OP that being unlocked may conflict with this. As this is the only difference between yours n mines.
so you rebooting and it just went to a black screen? any Asus logo or anything? can you get into recovery and reflash your rom or restore a backup?
Anyone with insight into how he get back using the old file from state he is in now?
Click to expand...
Click to collapse
I just went into recovery and restoring from a 3 old backup..
Lock-N-Load said:
I don't see a wifi scan interval on either the original or this build prop. That was one I changed from 30 seconds to 100 on my phone to cut down on the power used by wifi to go out and ping and search for signals.
On my phone is it wifi.supplicant_scan_interval = 30
A bit surprised this does not exist as it can be a good battery saver
I also see some telephony stuff in this prop that seems of no value as we dont have phones
Click to expand...
Click to collapse
it there is one actual in there. you have to look closely. its set to 100. I just looked in saw it. its like the 4th line above the additional build properties. I believe this scan is lower than in stock configuration.
I noticed the phone stuff also. he said once he updates, he has more tweaks he will add. ill update this thread with the changes also.