Related
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
Has anyone experienced their phone freezing/locking up? I'm not talking about lagging/freezing applications, but the whole phone actually locking up.
My phone seems to be freezing up about twice a week and has been for the last 3 weeks. Each time it has been when the device was in my pocket or on charge at night (and subsequently the alarm does not go off).
When the device is frozen like this, it has no indications of even having power.The power button will not turn the phone off, on, or wake the device. Plugging the phone into power doesn't even turn the orange/green charging lights on, nor play the tone for when power is connected.
I physically have to remove the battery for a few seconds from the phone and re-insert before the phone will start up. I have even performed a hard reset on this device.
Has anyone else experienced anything like this? I'm thinking that it might be a hardware fault, or at a really wild guess maybe the HTC Attentive App.
I'm having no problems with crashing or freezing!
I have actually found the device to be very stable, a lot nicer cleaner and stable than my previous device (Sony Ericsson Xperia X10).
Had exactly that problem a couple of times already. The only solution is to pull the battery out.
Still - better than an iPhone crash which requires you to plug it back into the PC before it will work again.
I had a similar situation:
I was making an international call (card service), when finished i heared the card IVR prompt if i need to make another call. I wanted to hang up but the screen was black adn dead. power button did not bring into life and i was keep on hearing the active call. had to take the battery out to kill this situation.
typically windows behaviour
Thought I had narrowed this down to the HTC attentive app, but alas the phone froze again this morning after hitting snooze 3 or 4 times. Oddly enough, the power button would turn the screen on and off, but the lock screen wouldn't show, nor could anything be moved or controlled on the screen (live tiles were still animated though). Battery pull again.
Yeah, typical windows behavior. No where near as bad as Windows Mobile which I came from though
I have the same issue. Can be in the middle of a call or anything. Had it reboot once while on charge too. Did you just remove the attentive app? Would it be worth trying a Hard Reset if that wipes the device. If so how easy is it to put your old Apps back on. Or do I need to write a list and search manually.
I did a hard reset and just didn't install the app again.
"When you buy or download apps from the Zune PC client, those apps are automatically redownloaded to the phone when you reset the device and login with your Windows Live ID again. When you download apps from the phone itself, you have to go to the Marketplace again to manually find and redownload the apps you want."
http://www.winsupersite.com/paul/mailbag/101023.asp#9
Hello guys,
Its my first post here, and my first android phone, and already i have a annoying problem.
I have searched these forums and many others but didnt find any similar problem or solution for it so here it is:
I bought Samsung Galaxy S2 15 days ago, from the local mobile service provider with contract. It runs OS Gingerbread 2.3.3 (adjusted to my mobile service provider settings), not rooted, under warranty.
Ive downloaded and installed many apps. Among them some free games from android market - demos, lite, free.
Sometimes, while i play, not often, game freezes. When it does only thing that is lest working is sound, and home button. Than i go to home screen, kill the game via android task manager, and than i see that screen auto rotation isnt working. Its stuck in landscape mode mostly, or portrait, even the auto rotation option is on. If it is in landscape mode, when i uncheck auto rotation then it goes to portrait mode. If i try some other game that supports sensor controls, like driving (accelerometer?).... u know...... when u tilt the phone to turn right or left......... and its not working.
Ive discovered 2 possible temporary solutions for the problem:
1. Turn off and on the phone, and its back to normal;
2. Wait for a 10 min or so, and its back to normal by itself;
I have one year warranty and i took the phone to service where they assumed that it is a software problem and flashed OS (ive recorded the behaviour of the phone with camera and showed to the service guy).
Ive got the phone back after a day with flashed OS. On a fresh instal of OS ive installed just one app, one game that it tends to freeze and cause problem - "Cordy" free trial. After just 20 sec of playing problem occurred again. It happened just that one time in last two days.
Any opinion on this matter is most welcome.
Tnx in advance.
If the phone is stuck then Restarting it is the option, not a temporary one. Now what's causing the freeze? I don't know.
Regards.
Tnx for answering. Im a bit disappointed with lack of answers because it just saying that my problem is not something common and with easy solution.
Im saying that restarting the phone is a temporary solution because i want find one that will prevent the problem for happening at all. Game freeze and accelerometer not working r connected in this case
It happened just now.
After that I checked in the app called sensor test that i instaled ffrom android market, and also that testing menu typing *#0*#.
in both cases it shows that acceleration sensor is not working. It came to normal by itself after 5 min or so.
What do u think? Software or hardware problem?
OK, update.
Its not caused just by the games, it happens even when not using any apps.
Accelerometer, orientation sensor and magnetic field sensor just stop working for a 5-10 min. Dont know whats causing this.
Tommorow is going back to service and im afraid that guys there r clueless.
Anyone have some suggestion pls.
Update on a problem.
My friend bought same phone from same service provider 3 days after i did and he is having exactly same problem.
He didnt had time before to test it but we did it yesterday, and after a hour of so trying to reproduce problem we succeded.
My phone is at service and i called today and the service guy said that the work on my phone is completed, they replaced sensors part (which apparanty comes with touch screen).
Im picking it up tommorow and i will test it and see if the problem is solved. But, im pesimistic.
How likely is that me and my friend have same hardware problem?
Here it is on video. Pls watch it and give any kind of oppinion, im getting desperate.
www.youtube.com/watch?v=Vym3cRHFjuw
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
UPDATE: I'm an idiot / Samsung's instructions on how to do a hard reset are awful.
I decided to Google how to do a hard reset and discovered that when in the Recovery Menu, you need to hold down the Power button to choose an option (Samsung's instructions just tell you to press the Power button until you highlight what you want and I assumed it would automatically choose that after a few seconds because the phone would restart for me). Watch is now factory reset and so far the screen issue appears to be resolved. Another four hours of transferring music it is then.
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
allow to power down
BOZG said:
Hey everyone!
I picked up a Gear S about a week ago and until today, I've had no problems. I took the watch off charge this morning and everything was working as fine, used some apps etc, no issues. Then I checked my phone for updates and saw that the Gear Manager app had an update and I installed it. Since then, the screen on my Gear S has been constantly turning on and off. It will turn for about 9 seconds, then switch off and back on 2 seconds later. Turning the screen on manually works but everything is pretty much frozen. I can periodically get as far as the pedometer (because there's an icon for it on the home screen) or to the Apps menu but no further and then the screen will switch itself off.
I'm not sure whether an update to the Gear Manager app should affect the watch itself but I know that when I wiped my phone a few days ago and went to set up the Manager again, it factory reset the watch so I assume there is a direct connection between the software. I've tried disabling both Bluetooth and the remote connection to check if Gear Manager is causing the screen to behave strangely but it's still turning on and off. It's impossible to do a soft reset through the Gear S itself as the screen switches off before I can get to settings and I've tried doing a hard reset but nothing works.
I tried searching on Google for anyone having similar issues and the only thread I can find was posted on Android Central (yesterday I think) with a few people saying that they're having the same problem which makes me thing that the update to Gear Manager is the issue.
Edit: The only screen that doesn't seem to be affected is the PIN lock screen. Screen switches off there as normal and does not come back on.
Edit 2: I've never reset the Gear S before (and I only noticed the factory reset mentioned above after it was finished) but when I attempt to do a hard reset, the watch just reboots as normal without anything happening and all info / data is still there. I presume this really shouldn't be the case?
Click to expand...
Click to collapse
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
theroblog.com said:
@BOZG can you post a link to that thread?
I have the Same problem. Sometimes changing a clock face or installing/uninstalling a program seems to make it stop. I have yet to find a good consistent solution. Restarts etc. don't help. Hard reset will fix it but last time I just changed settings on and off and powered the phone on and off and eventually it stopped.
It seems related to when the phone is connected remotely over a cell network. I have the AT&T unlocked with a T-Mobile regular line, not the wearable line since I have a 5 for $100 business plan and the 5th line was not being used. Doubt that makes a difference though.
Followup:
Just now I had the watch off and charged to 100%. Powered up with phone off. Same issue. Watch face loads, the hands change to the current time, then it slides down the screen and looks like a reload because when it comes back up the time isn't correct. The hands reset to the right time. This happens a few times. I power the phone up. Bluetooth connects. I open the gear manager on the phone and it stops.
Will try to repost if that's repeatable. I hope they fix it because it burns quite a bit of battery when it happens. It gets warm so it's running the CPU a lot whatever it is.
Click to expand...
Click to collapse
samsung gear s screen on and off..looping
There you go. Not much to read there though as it's just me and OP. The problem re-emerged for me after a few days again so I was forced to do another hard reset to actually use the watch. I noticed it when I woke up in the morning and noticed that another update had been pushed to the Gear app. That's twice now that this has happened shortly or immediately after the Gear app was updated.
I haven't been able to uninstall an app / change clock face to see if it works as the watch is completely unusable when it happens to me. The Gear app registers that it's connected but it's impossible to change anything from there either and if I turn the watch off and back on again, the Gear app will no longer connect.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Not sure if I've actually tried letting the battery drain. I'll try that the next time it happens (if it happens).
I had the same problem after the update, a reboot didn't solve the problem. Eventually the battery drained. After a recharge most is fine but I never know which watch face will suddenly appear.
Same issue again. Didn't see the Gear app updating but there was an update released the day before. Going to switch off auto-updates and see if it definitely the problem. Just seems too coincidental that this problem starts right after an update is released for the Gear App.
petethepete2000 said:
I left mine to use up all the battery,then when it switched off, i left for 2 days and when i switched back on... all fine again.
Click to expand...
Click to collapse
Started doing it again yesterday so let the battery die and charged it fully and it didn't help. Left it on the box overnight and brought it to a Samsung Service Centre this morning and of course it was working again when I took it out of the box! Left it with them anyway so I'll see what happens.
I've had my Gear S a few weeks and it has also started doing this, I will give some of the suggestions here a go.....
EDIT: So opening the Gear Manager App once Bluetooth was connected brought my Gear S back to life. Phew!
It's only entered this state after I turned it off at night and then turned it back on in the morning - so it had been off roughly 8 hours. Upon turning it on the screen would cycle from the right time and notification numbers and the wrong time and wrong notification numbers too off again.
@ BOZG - Just wondering if you got your S back yet and if so, were they able to tell you what was causing this on/off problem. Mine just started doing it yesterday.
Also, how did you find the "Samsung Service Centre"?
holding the screen seems to cause it...
Had to send mine to Samsung for a new charging cradle and they updated the software to latest, when i got it back it seemed fine. Then i was messing about with it and was holding the screen to my chest for a while and that seemed to cause it to happen. It seems to be the screens gets too much activation and it flips out. I think this is what started the problem last time it happened.1
Switching to power saving mode seems to fix it for me... have to wait until it gets low on battery and when the low bat warning comes on, switch then... leave for a bit then switch back to normal.
I called Samsung Thursday and they sent me a UPS label and told me to send the watch, charging cradle and AC charging cord back in for service. She told me it takes about 7-14 days. We shall see.
Happy to have found this. </rant>I'm starting to get enough of this Samsung stuff. I had the note 2 and now I have the note 4 and gear S. That is mote then 1000 euro of equipment. And today when I tried the restore to fix this, both the phone and the watch rebooted. Crazy that they can not build good software and hardware for this price. </rant>
To me it seems that is freezes somehow when this happens. It kept jumping back to 22:10 time and changed to the watch-face and settings keep rolling back. It seems to happen to me, when the watch is off for some hours. The samsung way... no update to fix this.
solved for me
hi first of all sorry if i do any mistakes because English is not my language
i had similar problem and i found the solution at least in my case . THE PROBLEM IS NOT WITH THE GEAR S
all was ok using 4.4.2 kitkat on my note 3 before few months i upgrade with lollipop 5 official from sammobile via odin
from that moment the problems begin with the reconnection of the gear with the note
long time to connect and no auto reconnection only manual by turning off-on the bluetooth
i was boring to do format to the note3 so i left it as it
few weeks ago probably of gear manager update the gear start freezing and the screen turning on and off
first i do a factory reset and the gear was ok for a while but after it do the same but the next time the screen was not ok the colors was different so i send to service in Athens
the service in Athens is very fast and very helpful , is one of the reasons that i will difficult go with other manufacture , so they return me the gear saying that they change the motherboard and now there is new imei
but the gear that they send me was brand new except the band and the box. BUT after some time the same problem ..... i call them and they tell me to send it back so i send it and i receive it again but this time the say that the watch is ok
GUESS NOW .... i turn it on and after a while of the connection with my note AGAIN the same problem the screen on and off and freezing plus was overheat underneath
i was ready to call them and to say few words but they was closed ..... then i search the net and i found this post and i thing probably is not the gear the problem ,no hardware problem, i decide to do a test
i download the last working rom to my phone 4.4.2 and magically the problem disappears .... but now there is a software update on my phone lollipop 5 so i do the update and i was ready if the phone cause again the same problem
to return and stay with 4.4.2 But now all is ok the problem solved .... now is more of 24h and all are ok
i hope this will work for you also
Same problem
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
JALUK said:
I have the same issue exactly - Note 4 with latest lollipop upgrade - it is very frustrating......I don't particularly want to have to move back an OS just to use the watch !
Click to expand...
Click to collapse
Ok but doing a downgrade and all working ok you can do update again.... i am not with 4.4.2 i went to the latest 5.0 for me now and all are ok.
Maybe something was wrong with the update procedure.
UPDATE
the touch function of the 2nd gear stop working so i send it back and they send me new device
for a few days all was ok . But today when i restart the phone while the gear was disconnected the problem with screen turning on repeatedly appears again .
for sure is not problem of the gear , this is the 3rd device in my hands, something is wrong with the gear manager software .
i have also reconnection problems .... if the phone is far away and they lost Bluetooth connection the most of the times i must reconnect manually , the gear say disconnected but the note think is still connected
I wonder has anyone tried to reset the watch as a stand alone device and see if the problem happens? I know you might lose a lot of the blue tooth functionality but I think I will test it and see if the problem still happens.
Hi!
I recieved my Note 2 today. After unboxing, I turned it on, did the starting settings (google account, wifi, etc). After that the phone went to sleep, and that's where the problems started. From that time the touchscreen and touch buttons didn't work correctly. It's like someone is pressing the buttons continuously and because of that the touchscreen can't work, or at least not in every area of the sreen.
Did a factory reset, didn't work... It's all the same, even during the initial setup.
Videos of the issue:
Forum won't let me post is, but I can send it in a private mail I guess...
Anyone had an issue like this before? Is it a software related bug (there is some beta version miui installed), or is the device defected?
Any help would be appreciated!
Edit:
The phone was turned off for the night. I turned it on this morning and I could open up the lockscreen with swiping up from the touch buttons. After that the phone worked for like 3 minutes, and then stopped working again.