Remove update? - Atrix 4G Q&A, Help & Troubleshooting

Hey guys just got the update and don't really notice anything different. I want to get a xoom wi fi only and need my tethering back. Will a factory reset remove this latest update or is there another way to do it?
Sent from my MB860 using XDA App

no, flash the stock SBF if you want to get back to normal.

truly, that would work to get back to normal, to rooted to updated with sideloading capabilities??

Where do i find a stock SBF (1.2.6)?

gachiennuocmam said:
Where do i find a stock SBF (1.2.6)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=991072
Sent from my MB860 using XDA Premium App

Related

[Q] About the OTA 2.3.4

I think i might have been one of the dumb ones to do the .zip flash of the BETA #3 gingerbread update. I searched and noticed the only way to go back to 2.2 was to unlock 1st. the question is when the official moto 2.3.4 comes out will i be able to update to that version without any issues via OTA?
I know some maybe running soak versions which may prevent them from reverting back to 2.2 as well. So do you guys think moto or the devs will figure a way for those that didn't root/unlocked before doing the update.zip to start recieving OTAs?
If ur on kens beta going back to stock will work and stock is the way you'll get the ota until it comes out as an sbf to flash
Sent from my MB860 using XDA Premium App
TechnoNeto said:
If ur on kens beta going back to stock will work and stock is the way you'll get the ota until it comes out as an sbf to flash
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I'm not on kens. i did the update i believe before kens was available. is there a way to go through kens route since i'm already on the stock 2.3.4?
If you flashed the stock OTA that was leaked, you risk bricking when flashing back.
Moto's OTA is designed to prevent backwards flashing.
I believe they found a way through pudding look on kens roms thread and there should be a link on how ti do so if nit there go to the calling all hardbricks post and do the steps there to prevent bricking
Sent from my MB860 using XDA Premium App
TechnoNeto said:
I believe they found a way through pudding look on kens roms thread and there should be a link on how ti do so if nit there go to the calling all hardbricks post and do the steps there to prevent bricking
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
what if i just want to get the offcial ota when it is released. would i still be in luck or still need to unlock and root?

OTA Gingerbread update with webtop modified files on Froyo

I want to update my atrix to the official gingerbread from ATT, but I'm scared I might brick my phone. I modified the files to use the webtop over hdmi, but I can't find the old ones. I don't even know if it is necessary to replace these files with the originals. Can someone please help me with this?
Sent from my MB860 using XDA App
Factory reset on 4.1.83 then do the update to gingerbread.
Sent from my MB860
How can I make a factory reset?
Sent from my MB860 using XDA App
Sackgi said:
How can I make a factory reset?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Flash to stock http://forum.xda-developers.com/showthread.php?t=991072 then upgrade.
DO NOT flash back after you upgrade the official OTA... or you will hardbrick the phone.

[Q] i don't wanna brick another atrix, help? :)

system version: 4.1.83 att us
baseband version 01.77.15p
android version 2.2.2
i bricked my old atrix trying to install gingerblur on it. since i don't want to mess up again, can someone please help me with this? i'm pretty noobish on android (wnt form iphone 4 to atrix) and don't want to mess up again
thanks!
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Javi97100 said:
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
fdotorres said:
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
Click to expand...
Click to collapse
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Javi97100 said:
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tenfar's CWM
fdotorres said:
tenfar's CWM
Click to expand...
Click to collapse
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Are you sure that your old atrix is hardbricked? Sounds like it would be more of a softbrick unless your old atrix had Gingerbread. Eitherway, it sounds fixable.
Javi97100 said:
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i'm unable to root it for some reason. tried cmd method as well as superoneclick... don't know what else to do

Quick restore question

Okay, quick question. I've made a back up in CWM recovery. (Unlocked, Rooted yada yada) If I RSD the 154 SBF can I flash back recovery? It's home base ROM or would I need to reflash it? Thanks.
xTMFxOffshore said:
Okay, quick question. I've made a back up in CWM recovery. (Unlocked, Rooted yada yada) If I RSD the 154 SBF can I flash back recovery? It's home base ROM or would I need to reflash it? Thanks.
Click to expand...
Click to collapse
I think if you flash any SBF, you'll lose CWM...So you'll probably need to unlock and reflash CWM afterward.
Yeah. I did that . Knew I would have to. I also found running home base with alien theme and doing a restore after sbf I got some fc's and no service. So unless I missed something this isn't possible with the setup I'm running.
Sent from my MB855 using XDA App
Ahhh that sucks...so you tried updating to the latest sbf and then unlocked and flashed cwm and then tried restoring? Sorry if im confused...but I think because home base was based on an older build it probably wouldn't work..just a guess...
Sent from my MB855 using xda premium
Tried it from the 198_7 and the 154_5 builds both failed. And yes you got it.
Sent from my MB855 using XDA App
I remember asking qbking a similar question about alien...he said if I tried updating phone and then tried to flash alien rom there would be problems. I didn't ask for details, and can't be sure what the issues are...did u just want to keep over clock?
Sent from my MB855 using xda premium
I wanted to keep the theme. It wouldn't work with 198_7.
Sent from my MB855 using XDA App
You can flash the de-odexed 198_7 stock based rom and run alien theme over it, cant you?
Sent from my MB855 using xda premium
Tried that. Force close issues
Sent from my MB855 using XDA App
Damn...yeah..well I wish I knew how to theme...i might read up tomorrow..it seems like such a lame thing, but I guess I really liked the menus and the dialer..the blacked out look was sick...this stock blue dialer makes me want to yack.
Sent from my MB855 using xda premium
That is why I am on home base with the Alien theme. I like it. I agree though. The black and green is sweet.
Sent from my MB855 using XDA App

[Q] Need help in unbricking my photon!

I bricked my photon when I was trying to install a custom rom..
I get the error failed to boot 2.
When I try to follow the steps mentioned here...http://forum.xda-developers.com/showthread.php?t=1540349
In the first step itself when I want my phone to be back to stock I not able to do it...When im trying to transfer the sbf file I get "Failed flashing process. Unable to retrieve interface handle. (0x7027)"
Please guide me what to do.
which version? 2.3.4 or 2.3.5
if 2.3.5 http://forum.xda-developers.com/showthread.php?p=29366503
Sent from my Slim Photon using Tapatalk 2
jrebo said:
which version? 2.3.4 or 2.3.5
if 2.3.5 http://forum.xda-developers.com/showthread.php?p=29366503
Sent from my Slim Photon using Tapatalk 2
Click to expand...
Click to collapse
I dint understand ur question...
Before installation a custom rom my phone was in 2.3.5
I tried to install the latest MIUI rom for photon.
srikarchinna said:
I dint understand ur question...
Before installation a custom rom my phone was in 2.3.5
I tried to install the latest MIUI rom for photon.
Click to expand...
Click to collapse
Bootloader is locked or unlocked???
Sent from my MB855 using xda app-developers app
Cooldevil1989 said:
Bootloader is locked or unlocked???
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
It is locked...
I did not unlock the bootloader..
Thats what the problem was your bootloader was locked so you cant flash roms that only work when unlocked
Sent from my MB855 using xda app-developers app
MarcquisDale said:
Thats what the problem was your bootloader was locked so you cant flash roms that only work when unlocked
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Omg! Now what are the steps to be followed...?
Use it as a pretty paperweight
Sent from my MB855 using Tapatalk 2
onarbuithe
Productzer01 said:
Use it as a pretty paperweight
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
not very funny..
I'm not joking unfortunately.
Look for electrify unlock I think that's your only option
Sent from my MB855 using Tapatalk 2
Productzer01 said:
I'm not joking unfortunately.
Look for electrify unlock I think that's your only option
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Yea thats only option and then you can flash stock zip back
Sent from my MB855 using xda app-developers app
1st if you haven't tried it yet go to recovery and do a wipe and reset.
If that don't work...
Find the Electrify 2.3.5 USC_19 sbf file you can install to get back up and running. But its not sprint. You have to install a couple of other files to get the sprint radio and wi-fi to work. It's all here, google is your friend.
Good Luck.
The 1st reply you got has the info to get you back to sprint.
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
rbeavers said:
1st if you haven't tried it yet go to recovery and do a wipe and reset.
If that don't work...
Find the Electrify 2.3.5 USC_19 sbf file you can install to get back up and running. But its not sprint. You have to install a couple of other files to get the sprint radio and wi-fi to work. It's all here, google is your friend.
Good Luck.
The 1st reply you got has the info to get you back to sprint.
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
Click to expand...
Click to collapse
im not able to enter the recovery mode....
Is there no other way????
I need little more explanation plz.
Could you please explain all the steps I need to follow..Coz I'm a little new to all these stuff...
I did see the this thread http://forum.xda-developers.com/showthread.php?t=1798145 but i dint understand from it..
So I want you to enlist the steps to be followed
When I tried to flash with Electrify 2.3.5 USC_19 sbf file..I finished but in the end I got this error "Error switching phone to BP pass through mode (0x70BE)".
Is this expected??
There is an error don't remember what it is.
Pull battery put back in did it boot up?
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
The error is actually ok just pull battery out and put it back in and turn on the phone, us cellular boot screen should come up and also it may take a little time to boot up completely to home screen.
Sent from my MB855 using xda app-developers app
Yes , It worked ! It has reached the home screen..Now what is the next step????
From the other thread.
Full
After flashing this, you need to flash locked custom rom, "2.3.5_254_13 sv2 boot, recovery and cdrom image" and some sv2 sbf radio, for working Sprint services, including 4G.
Screwed by Google. Canceled ICS upgrade on my Moto Photon. No Wow for us.
Lol i like that signature
Sent from my MB855 using xda app-developers app

Categories

Resources