OTA Gingerbread update with webtop modified files on Froyo - Atrix 4G Q&A, Help & Troubleshooting

I want to update my atrix to the official gingerbread from ATT, but I'm scared I might brick my phone. I modified the files to use the webtop over hdmi, but I can't find the old ones. I don't even know if it is necessary to replace these files with the originals. Can someone please help me with this?
Sent from my MB860 using XDA App

Factory reset on 4.1.83 then do the update to gingerbread.
Sent from my MB860

How can I make a factory reset?
Sent from my MB860 using XDA App

Sackgi said:
How can I make a factory reset?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Flash to stock http://forum.xda-developers.com/showthread.php?t=991072 then upgrade.
DO NOT flash back after you upgrade the official OTA... or you will hardbrick the phone.

Related

Remove update?

Hey guys just got the update and don't really notice anything different. I want to get a xoom wi fi only and need my tethering back. Will a factory reset remove this latest update or is there another way to do it?
Sent from my MB860 using XDA App
no, flash the stock SBF if you want to get back to normal.
truly, that would work to get back to normal, to rooted to updated with sideloading capabilities??
Where do i find a stock SBF (1.2.6)?
gachiennuocmam said:
Where do i find a stock SBF (1.2.6)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=991072
Sent from my MB860 using XDA Premium App

[q] problem (brick?)

Hi, i have the screen always on motorola logo... this is a hard brick? I can put right my phone?
TY
No your just stuck in a boot loop. If you have cwm you can try a factory reset, or flash an sbf if your on an att atrix. Not sure if there is an sbf for other versions.
Sent from my MB860 using Tapatalk
ty for the fast reply... i have an att phone. How i can flash an sbf?
ty...
http://forum.xda-developers.com/showthread.php?t=991072
Do not do it if you flashed the 2.3.4 update or you will have a hard brick. I would recommend starting from 1.2.6 so you can root.
Sent from my MB860 using Tapatalk
i have this problem after the installation of
[ROM] AT&T 4.5.91 ★ Gingerbread 2.3.4 ★ Beta #4
If you flashed kenns rom you should be ok flashing an sbf I think it would only brick if you used the other method. If you can get into recovery I would recommend just flashing kenns rom again though should fix it
Sent from my MB860 using Tapatalk
ok, tomorrow i wonna try... ty. now im going to go...
ty
I had that problem I realized it wasn't working because I downloaded the wrong cwm... I had an older version make sure u get the one by the screen shot that says 6/30 or it'll brick. No it isn't hard brick what I did was flash hktw with moto-fastboot and from there I installed gingerbread beta 4 and its flawless it took a lot of help from xda team but I love it I thought id extend my help
Sent from my MB860 using XDA Premium App
hi, with rsdlite i have flashed 1.2.6 and the phone now works! now i must flash this? OLYFR_U4_1.5.2_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf
ty!
frankiedizzle87 said:
I had that problem I realized it wasn't working because I downloaded the wrong cwm... I had an older version make sure u get the one by the screen shot that says 6/30 or it'll brick. No it isn't hard brick what I did was flash hktw with moto-fastboot and from there I installed gingerbread beta 4 and its flawless it took a lot of help from xda team but I love it I thought id extend my help
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
sorry, but where is this screenshot?
ty

[Q] About the OTA 2.3.4

I think i might have been one of the dumb ones to do the .zip flash of the BETA #3 gingerbread update. I searched and noticed the only way to go back to 2.2 was to unlock 1st. the question is when the official moto 2.3.4 comes out will i be able to update to that version without any issues via OTA?
I know some maybe running soak versions which may prevent them from reverting back to 2.2 as well. So do you guys think moto or the devs will figure a way for those that didn't root/unlocked before doing the update.zip to start recieving OTAs?
If ur on kens beta going back to stock will work and stock is the way you'll get the ota until it comes out as an sbf to flash
Sent from my MB860 using XDA Premium App
TechnoNeto said:
If ur on kens beta going back to stock will work and stock is the way you'll get the ota until it comes out as an sbf to flash
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I'm not on kens. i did the update i believe before kens was available. is there a way to go through kens route since i'm already on the stock 2.3.4?
If you flashed the stock OTA that was leaked, you risk bricking when flashing back.
Moto's OTA is designed to prevent backwards flashing.
I believe they found a way through pudding look on kens roms thread and there should be a link on how ti do so if nit there go to the calling all hardbricks post and do the steps there to prevent bricking
Sent from my MB860 using XDA Premium App
TechnoNeto said:
I believe they found a way through pudding look on kens roms thread and there should be a link on how ti do so if nit there go to the calling all hardbricks post and do the steps there to prevent bricking
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
what if i just want to get the offcial ota when it is released. would i still be in luck or still need to unlock and root?

[Q] i don't wanna brick another atrix, help? :)

system version: 4.1.83 att us
baseband version 01.77.15p
android version 2.2.2
i bricked my old atrix trying to install gingerblur on it. since i don't want to mess up again, can someone please help me with this? i'm pretty noobish on android (wnt form iphone 4 to atrix) and don't want to mess up again
thanks!
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Javi97100 said:
How do you hardbrick flashing gingerblur?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
fdotorres said:
lol dunno
i bought my atrix off of ebay, rooted and unlocked the bootloader, then messed up with gingerblur. maybe it was because i had the lastest updates installed on the atrix?
Click to expand...
Click to collapse
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Javi97100 said:
With what recovery did you flash gingerblur
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
tenfar's CWM
fdotorres said:
tenfar's CWM
Click to expand...
Click to collapse
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Are you sure that your old atrix is hardbricked? Sounds like it would be more of a softbrick unless your old atrix had Gingerbread. Eitherway, it sounds fixable.
Javi97100 said:
You were supposed to flash through the system recovery app's recovery, but anyways back to your question. If you follow directions on how to do things im sure you'll be fine off, as of now the only way to hardbrick is to sbf back when you have the ota installed,
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i'm unable to root it for some reason. tried cmd method as well as superoneclick... don't know what else to do

Revert back to 2.3.3

If I wanted to go back to 2.3.3 where can I find those files. Or can i just flash the ruu for 2.3.3?
Sent from my PG86100 using XDA Premium App
??
Sent from my PG86100 using XDA Premium App
Depends, did you take the OTA or did you install a custom rom to get to 2.3.4. If you took the OTA and you weren't rooted before I don't know if you can go back. The HTC unlocker method of rooting will not let you install a kernel so I don't believe you will be able to flash a 2.3.3 rom since it will require an compatible kernel.
If your on 2.3.4 taking the ota then there is no way to go back to 2.3.3
Sent from my PG86100 using Tapatalk
cruise350 said:
Depends, did you take the OTA or did you install a custom rom to get to 2.3.4. If you took the OTA and you weren't rooted before I don't know if you can go back. The HTC unlocker method of rooting will not let you install a kernel so I don't believe you will be able to flash a 2.3.3 rom since it will require an compatible kernel.
Click to expand...
Click to collapse
I took the custom ROM method.
Sent from my PG86100 using XDA Premium App
Then u should be good to go. Just remember when you take the ruu method you will loose everything
Sent from my PG86100 using Tapatalk

Categories

Resources