[Q] Whoops, TiBu freeze brick! Flash or ?? - Atrix 4G Q&A, Help & Troubleshooting

Hello, any advice/suggestions would be appreciated!
After doing the update process (Root v2) I went back into TiBu and started freezing the bloat, and I kinda got carried away (I didn't even know what everything I froze was... stupid! To any other dummies out there: just because it has motorola in the name, don't assume it's bloat, apparently).
Then I left TiBu and turned off my phone. Upon reboot, it brought up the red moto dual core thing, and then it did the first 2-3 seconds of the red moto dual core with red wavy animations around the circle, but then suddenly stopped and the red light began flashing.
Holding volume up and volume down on subsequent reboots brought up different messages about starting some kind of protocol and fast boot, respectively, but after five minutes I figured that they were just frozen too.
So I f'ed it up. Right now I'm just charging my phone to do the "[Guide] Flash SBF to Atrix" directions. But INSTEAD, is there any way I can just defrost what was frozen in tibu without going through all that? Not a huge deal, but I'd rather not do the SBF Flash (looked lengthy to a noob like me) AND the update process again.
Thanks!

Ah, found this link that explains how to use super one click to "recover from a soft brick caused by freezing needed apps or services."
I need to "run shell root from superoneclick in Early USB Enumeration." I have a mac, so I downloaded the drivers and super one click onto a ****ty, borrowed netbook. The problem is I don't know how to run it in early usb enumeration, and even running s.o.c. seems problematic because my atrix starts booting up when connecting to the ****ty netbook, and gets itself nice and soft bricked/frozen/stuck.
I really don't want to keep guessing and doing battery pulls - I fear eventually my Atrix will get tired of this mistreatment and REALLY brick itself for good... if anyone has any info, please help!

Related

Two parter, first part HELP!!!

First off this is my first post, and I gotta thank everyone cause I've been able to do some cool stuff with my phone and without the support of the community and the vast knowledge some of the guys (and gals) have on xda, I would be just another average consumer. And I'm still learning.
So a few days ago I tried to update my rooted Vibrant (with the lag fix) through Tmobile, like a noob, without unrooting my phone and everything was going great until the phone rebooted and got stuck on the "Samsung" startup screen.
I was able to fix that after reading through the odin3 fix and got the phone up and running again. Decided I didn't need froyo that bad and just reinstalled all my old stuff with Titanium backup.
Then after reading through the forums a little more I got the itch to try 2.2 again, so I was a little smarter this time, undid the lagfix, unrooted the phone and started the update. But once again, frozen at the "Samsung" screen...
Odin to the rescue again. But this time as odin was doing its thing, the power went out in my house, ughhh! Got everything back up and running and when I tried to turn the phone on it goes to a screen I haven't seen before, with a "phone" icon, two dots, a "triangle caution" icon, two dots, and a "computer" icon, and it wont get out of it. It won't connect to my computer so it won't connect to odin.
I'm usually decent at finding the solutions on the forums and I could have sworn I read somewhere about this type of problem, but I guess I'm wording my searches wrong so nothing is coming up.
So how do I get my phone out of this mode? Or is it bricked?
Also does anyone now why the phone would freeze like that after the update? I probably should have just flashed one of the froyo roms, but I figured it would be easier to return if the OS was from Tmobile.
steambrick said:
First off this is my first post, and I gotta thank everyone cause I've been able to do some cool stuff with my phone and without the support of the community and the vast knowledge some of the guys (and gals) have on xda, I would be just another average consumer. And I'm still learning.
So a few days ago I tried to update my rooted Vibrant (with the lag fix) through Tmobile, like a noob, without unrooting my phone and everything was going great until the phone rebooted and got stuck on the "Samsung" startup screen.
I was able to fix that after reading through the odin3 fix and got the phone up and running again. Decided I didn't need froyo that bad and just reinstalled all my old stuff with Titanium backup.
Then after reading through the forums a little more I got the itch to try 2.2 again, so I was a little smarter this time, undid the lagfix, unrooted the phone and started the update. But once again, frozen at the "Samsung" screen...
Odin to the rescue again. But this time as odin was doing its thing, the power went out in my house, ughhh! Got everything back up and running and when I tried to turn the phone on it goes to a screen I haven't seen before, with a "phone" icon, two dots, a "triangle caution" icon, two dots, and a "computer" icon, and it wont get out of it. It won't connect to my computer so it won't connect to odin.
I'm usually decent at finding the solutions on the forums and I could have sworn I read somewhere about this type of problem, but I guess I'm wording my searches wrong so nothing is coming up.
So how do I get my phone out of this mode? Or is it bricked?
Also does anyone now why the phone would freeze like that after the update? I probably should have just flashed one of the froyo roms, but I figured it would be easier to return if the OS was from Tmobile.
Click to expand...
Click to collapse
Email me [email protected]
Thegreat520 said:
Email me [email protected]
Click to expand...
Click to collapse
That's nice of ya GreatOne
+1 vote for personalized help...
~SB

[Q] HELP! Photon wont boot! (Stuck at red M)

So yesterday I was in a call with low battery when it shut off. Normally not a problem, just plug it into the wall for a while. Well when I tried to turn it on, it wouldn't even boot up. It was stuck at the red M logo. The LED showed amber colored as well. I left it plugged in and the light remained amber until 90% battery, where it turned green.
I tried to turn it on and its been stuck on the red M logo. Its been stuck for more than 12 hours now.
I CAN access fastboot, android recovery, etc. I already tried wiping the cache and even did a factory reset. Still wont work.
What can I possibly do? I luckily have a backup phone, but I've had my photon for less than a month, no warranty, and I'm a novice Android user. Any help would be greatly appreciated.
MooseV2 said:
So yesterday I was in a call with low battery when it shut off. Normally not a problem, just plug it into the wall for a while. Well when I tried to turn it on, it wouldn't even boot up. It was stuck at the red M logo. The LED showed amber colored as well. I left it plugged in and the light remained amber until 90% battery, where it turned green.
I tried to turn it on and its been stuck on the red M logo. Its been stuck for more than 12 hours now.
I CAN access fastboot, android recovery, etc. I already tried wiping the cache and even did a factory reset. Still wont work.
What can I possibly do? I luckily have a backup phone, but I've had my photon for less than a month, no warranty, and I'm a novice Android user. Any help would be greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1393519
Click on the software and tools link and use rsd lite to reflash the stock os onto the phone. If that doesn't work I would take it to the sprint store.
I assume you tried pulling the battery?
I'm downloading SBF now. Hopefully it works, because I live in Canada and we don't have Sprint stores.
And YES, I tried pulling the battery. Multiple times. With every combination (eg, plug in, turn on, then insert battery; put in battery, turn on, then plug in, etc)
the sbf should work but may i ask how you managed to brick your photon? when i just got mine i did everything wrong and i never got even a soft brick so i'm interested what i didn't mess up haha
Quick question: I should be downloading the most recent? Will it make a difference?
And damn, did I actually brick it?? I'm pretty new to this thing, this is my first Android and I've had it for less than a month...
And nothing should have triggered it. I added another line in build (ro.media.setting.1080p or something) and I added another setting in /system/etc/mediaprofiles.xml. I was trying to add 1080p to the camera (unsuccessfully). I didn't remove anything, and even after a reboot it was fine.
It wasn't until the battery died, where it stopped booting up. Just my luck :/
You should probably choose one of the newer ones, just becasue of bug fixes, etc. If you happen to know what version you were running before then I'd choose that. I cant stress enough, make sure the one you download is for the Photon and NOT Electrify! And technically yeah that is a brick lol but its extremely hard to legit brick beyond repair a photon due to the fact that we have RSD Lite and SBF files to bring it back.
Strangely, I found a thread depicting the same problem that I had, although with the electrify. http://forum.xda-developers.com/showthread.php?t=14813
Anyways, the problem is fixed, by reflashing the SBF using RSD Lite, everything is back to normal! Well, almost, just have to restore my backup
Thanks so much for your help guys, I wouldn't have been able to fix it without you all!
can you fix a bricked phone??
My Photon has done the same thing! I rooted her and did the Bootstrap Recovery thing. Everything was kosher until I tried to load that stupid Beats Audio. Something happened between me flashing it and the reboot where it locks the phone. I tried to do the Android recovery screen, I wiped, I did about everything I could find. No bueno.
I followed this forum and clicked the software and tools link as instructed. I tried with RSD 5.6, and tried several iterations of SBF's located here and here. I was using SBF - 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_MR-3-CM.
It lets me go into boot mode, and when I try to flash the SBF it appears to go through, but it always fails at the end. Which, the posts state it will do, but my phone will not reboot afterwords. After trying everything I could for a couple days, I decided to just take it to a Sprint store. Mind you I've had this under 30 days, but longer than 14 so they stated it would have to be replaced. They tried to flash, but said they were getting stuck too.
I know that a replacement is pretty much the answer, but just wanted to check one more time to see if anyone had any other ideas, or could point me to other forums maybe? Appears I've done what few have been able to accomplish...brick this joker.

[Q] LG Mach Won't Get Past Boot Screen

I bought an LG Mach LS860 (4.0.4 Ice Cream Sandwich) about a week ago, and I just found out about rooting. (This is my first Android.) I had no luck last night, but I tried today and I got it rooted.
Anyway... here's the problem: I was altering some settings with an app (I believe it was called Pimp My ROM.) and everything was fine. When I restarted, the battery was lower by about 7%. I figured the changes I made were the reason for this, so I went back and reverted them. However, when I restarted the phone this time, it wouldn't get past the boot screen. It would flash the Boost logo, go dark, then flash it again with an animation and a short vibrate. That's all. So I tried restoring the factory settings. (Volume down + power button, then power button and power button.) The phone went through and reverted settings, then rebooted. But THIS time, I got messages popping up like "Unfortunately, System UI has stopped." I believe there was something along the lines of "Unfortunately, Home has stopped." as well. On a layer below that at the bottom of the screen, there was another type of error. I think it had to do with voicemail. After the phone sat there for a bit as I looked online for a solution, the phone restarted again. Now it just goes to the problem from the beginning with the boot screen. My computer makes a noise indicating the USB is connected, but all my phone does is charge off it.
Any help would be much appreciated.
It's not necessarily that I'm inexperienced. I've done all sorts of flashing and things on PSP. Obviously Android is much more complex. But I know that it's not bricked unless it won't turn on at all. Because that's not a brick.
There's also very little (if any) development for this specific model. No one cares about the LG Mach because there are much more well-known phones. But I digress.
Please help. I'm extremely desperate to get this working again.
EDIT: I recently thought of another question. Would the hard reset erase all evidence of the root access? Considering I just bought the phone, I might be able to send it back. But obviously if they know I accessed the root, the warranty is void.

[Q] HELP! My droid razr m will not boot past the droid eye

I apologize already if this has already been posted before, I couldn't see one that had my issues so I'm making this thread.
OK, so here is my problem and everything that I can think of that I've done to my phone.
Today I tried to restart my phone as it was getting a bit sluggish. When I did it started booting fine then the animation sound stopped while the droid eye was being put together. Now my phone will not pass the droid eye during the boot phase. I press the power and both volume buttons and after a few seconds it starts itself back up again. I do the power button and down volume buttons and it still does the same thing. I've even performed the factory reset twice and it still won't help.... And no matter what I do it keeps booting itself back up on its own.
What I've done to my phone:
I am rooted but never got the boot loader unlocked since i waited too long and the last update wouldn't allow the boot loader unlock methods anymore. I have used titanium backup app to delete some system apps for example the Verizon football one, slacker radio, and any of those useless apps that I never use. I haven't deleted anything lately and have restarted my phone many times since. I have been delaying the recent update hitting no or not now, whatever it says. I thought that I said no today on the system update as well. Even then my phone was working before I restarted it.
PLEASE I hope that there is something that I can do to fix my phone because I'm forced to use my LG Vortex again and my upgrade isn't for another year..... I don't want to buy a new one since this phone has been great and I'm almost certain that if there was a way to reinstal or flash the droid razr m OS that that would fix my issues.
Thanks in advance for your input and please know that I'm a novice with this kind of thing so you will have to explain the process to me. If i have instructions I can definitely follow them.
THANKS!
SORRY
I just noticed that for some reason I got out of the Droid Razr M forum. You are free to respond if you like but I have posted this thread in the right form now.
Sorry again

Another stuck at ReThink Possible thread

Yup, another NEWB having trouble looking for help. Have a rooted ATRIX 4g, (ADB/Fastroot method), but am away from home, so do not have access to the PC with drivers, ADB, etc. on it. I am running stock ROM, took the last OTA update and retained Root using Rootkeeper. I did not unlock the bootloader. Today phone started soft-boot like symptoms after I downloaded an app (Mayo Clinic PAtient App) partially installed it - app installed, but was waiting on info to login, when phone locked and I pulled battery. At this point, phone will not boot. It goes through Motorola Dual Core to Rethink possible, but then times out and reboots before loading OS. I have downloaded Motorola Drivers, I can bring up RSD, I can get to Fastboot menus. Any and all help appreciated!
Tried Fastboot Andriod Recovery, got white Triangle with yellow exclamation point. Somebody please tell me I wont have to do a factory reset. :crying: At least I have my usb battery charger with me, charging up a battery just in case.
Worst timing ever - all the relatives have my cell phone number for updates on my Wife, we are at Mayo Rochester all week.
Another odd thing - can't get the phone into safe mode.
Damn I am stubborn. After repeated efforts - and we're talking about 90 minutes here, I found by holding down the up/down vol buttons at the same time and holding them all the way through the painfully slow Rethink possible, past the long vibrate, all the way to home screen, I could get into safe mode. First time the phone still rebooted. Second time could not get past lock screens, third time I got in and uninstalled last couple programs I installed and the phone boots normally again. Hope this helps others.

Categories

Resources