Well Some of you guys will be surprised that i am writing about an actual concern of mine. BOOBIES!!! Now that that is out of the way.. I currently operate a Samsung Vibrant T-959 with (ROM)(PORT)Simply Galaxy 2.7XE SweeyHoney.ZSJPJ W/OverStock-v2.2.1 And a Ka7 Kernel Wich is a port from the Samsung International series I9000.
My problem is that every computer i connect to, doesnt recognize my device. Ive tried installing new drivers as well as re-flashing the rom, and still my device is not recognized. I have noticed that within the rom im using, there is a ".prop Editor" in SGHToolS. I see that if i knew what i was doing i might be able to change everything that says I9000 to T-959 (which every computer recognized)
Ive done some researching about "prop Editor" and i havent left feeling confident about messing with it. Im sorry if there was a post that expressed this concern in the past, i haven't found one but that doesnt mean its not here. So in closing, Thank you And HELP ME PLEASE!!... And remember, we all where noobs at some point
You need to download the AIO toolbox on the computer you are using and Install the drivers that program gives you. Its an actual button the the program that says "Install Drivers"....the drivers needed on the computer are not included in the classic driver install when you connect the phone. Even if you search the internet for the drivers (the option it gives you) it wont find the right ones.
also make sure you enable debugging (duh)
::if i helped, thank me::
rubbamade said:
You need to download the AIO toolbox on the computer you are using and Install the drivers that program gives you. Its an actual button the the program that says "Install Drivers"....the drivers needed on the computer are not included in the classic driver install when you connect the phone. Even if you search the internet for the drivers (the option it gives you) it wont find the right ones.
also make sure you enable debugging (duh)
::if i helped, thank me::
Click to expand...
Click to collapse
I'll try it out!.. Pressing thanks button.... Now!
Sent from my GT-I9000 using XDA Premium App
I think the toobox installs drives also.
http://forum.xda-developers.com/showthread.php?t=954509
wasscomedy said:
Well Some of you guys will be surprised that i am writing about an actual concern of mine. BOOBIES!!! Now that that is out of the way.. I currently operate a Samsung Vibrant T-959 with (ROM)(PORT)Simply Galaxy 2.7XE SweeyHoney.ZSJPJ W/OverStock-v2.2.1 And a Ka7 Kernel Wich is a port from the Samsung International series I9000.
My problem is that every computer i connect to, doesnt recognize my device. Ive tried installing new drivers as well as re-flashing the rom, and still my device is not recognized. I have noticed that within the rom im using, there is a ".prop Editor" in SGHToolS. I see that if i knew what i was doing i might be able to change everything that says I9000 to T-959 (which every computer recognized)
Ive done some researching about "prop Editor" and i havent left feeling confident about messing with it. Im sorry if there was a post that expressed this concern in the past, i haven't found one but that doesnt mean its not here. So in closing, Thank you And HELP ME PLEASE!!... And remember, we all where noobs at some point [/QUOTE
First make sure it not in Debugging mode
Then try something as simple as Settings/ Wireless and Networks/USB Settings/ask on connection or just enable Mass storage/ and it will pop up with a selection of accepting it and then your phone will be mounted!
I have a T959 Vibrant just like you,and Im running about the same ROM as you, and Im having no problems using WIN XP PRO 32 bit OS on my lappy! The ROM detects the phone as a GT-I9000 but I still can still mount it, or have a port appear if i use ODIN, or BayWolfs program etc!
Click to expand...
Click to collapse
First make sure it not in Debugging mode
Then try something as simple as Settings/ Wireless and Networks/USB Settings/ask on connection or just enable Mass storage/ and it will pop up with a selection of accepting it and then your phone will be mounted!
I have a T959 Vibrant just like you,and Im running about the same ROM as you, and Im having no problems using WIN XP PRO 32 bit OS on my lappy! The ROM detects the phone as a GT-I9000 but I still can still mount it, or have a port appear if i use ODIN, or BayWolfs program etc![/QUOTE]
WoW!.... Somthing inside tells me to just agree with the first so i can blame my computer and not the noob... But sure as **** it just worked for me... In my defence i swear ive done that... but probs not... Thanks again
nomadrider123 said:
I think the toobox installs drives also.
http://forum.xda-developers.com/showthread.php?t=954509
Click to expand...
Click to collapse
Thanks dude, my buddies computer will probs need this and not just the obvious step i just preformed. I absolutly love the knoledge of everyone on this site!! I feel dumb sometimes, but im learning
Everything worked great!!!
That being said, this morning while i was pluging mu usb in the computer, my finger touched the other end of the usb cable(that plugs into phone) Ever since then my computer doesnt even recognize that its pluged in...
Whe its in "debuggin" the computer and usb icon go on the phone
But when i plug into computer all my phone does is says its charging
Any ideas?
when its plugges in and you see the icons on your phone...pull down the menu and click the one that says 'connect USB' on your phone...then click ok when it asks you if you want to connect...should work
rubbamade said:
when its plugges in and you see the icons on your phone...pull down the menu and click the one that says 'connect USB' on your phone...then click ok when it asks you if you want to connect...should work
Click to expand...
Click to collapse
Thats what i would normaly do... but when i plug it in, my phone doesnt even give me the option of that.. My phone just thinks its charging while in computer :/
This happened to my girlfriends phone last week...she is running bionix 1.3.1.....i thought something was wrong so i re-installed the ROM to no avail. I gave up for the night.
The next day i plugged it in to the computer...and boom....worked fine. I dont know what caused it...but after a day it worked fine for me after doing essentially nothing.
maybe try going into recovery and reflashing your Kernel (tigersblood overstock whatever) then fix the permissions and wipe cache partition. and reboot.
just an idea but it may work.
rubbamade said:
This happened to my girlfriends phone last week...she is running bionix 1.3.1.....i thought something was wrong so i re-installed the ROM to no avail. I gave up for the night.
The next day i plugged it in to the computer...and boom....worked fine. I dont know what caused it...but after a day it worked fine for me after doing essentially nothing.
maybe try going into recovery and reflashing your Kernel (tigersblood overstock whatever) then fix the permissions and wipe cache partition. and reboot.
just an idea but it may work.
Click to expand...
Click to collapse
will try.. time is all i have..lol
Related
Please forgive me if I've missed a post somewhere, I've been searching for weeks for an answer to my problem and I still don't see one (similar cases, but either a-no answer or b-solution for another problem).
Computers:
A Windows 7 (32-bit) system and a Windows XP (32-bit) system.
Phone:
Samsung Vibrant SGH-T959
Firmware Version: 2.2
Baseband Version: T959UVJL5
Kernel Version: 2.6.32.9
Build Number: Nero.v3
Description of Problem:
When I plug my phone into either or my two computers the following occurs - My phone recognizes that it is plugged in and begins charging; my computers do nothing.
When I was on Android 2.1 I could plug my phone into either of my two systems and my PCs would respond appropriately (ie. show the drive letters and let me access the device once I mounted the device).
Since the very first Android 2.2 install my computers act like nothing is happening. ADB doesn't see my phone, Odin is silent, and Windows doesn't show any drive letters nor does it even show that I am plugging in a USB device.
I have tried to correct this by changing the USB settings on the phone (Kies, Media Player, Mass storage, Ask on connection) and even trying to connect while in debug mode. Sadly, I never made a nandroid backup to take me back to the Android 2.1 install (idiot me took the plunge before reading up on that section).
I don't understand what would cause my phone to be treated as if it wasn't there. I've tried different USB ports, different MicroUSB cables, and even uninstalling/reinstalling the various device drivers for the phone.
I can get into download mode just fine, but what's the point if Odin can't see the phone since Windows thinks that nothing is there? Before you ask, yes, I tried going into download mode before starting Odin as well as after starting Odin; debug mode on and debug mode off. I've been trying all the combinations.
If anybody has any information beyond what is in the stickies, I would greatly appreciate it!
Do you see "USB connected" in notification bar on the phone? You can also turn on USB debugging mode in USB settings. If you see "USB connect" in pull down notification bar..tap on that and it will mount on your computer.
I experienced similar problem with.axura tool...phone well charge but doesn't pop out the mount notification. I power off both my phone and computer and it work again. I'm sure this won't on your scenario but just wanna inform you that it's not all hopeless...good luck
Yes. I have seen the mount USB bar. Bad news: even after it says mounted, the PCs react as if nothing has happened.
Sent from my SGH-T959 using XDA App
First of all, read this forum (last post is mine) http://forum.xda-developers.com/showthread.php?t=925393 - make sure you have kies or kies mini installed so that you have the correct drivers on your computer for your vibrant.
secondly, team whiskey has developed a fix for the mount issue your experiencing: http://forum.xda-developers.com/showthread.php?t=846384&highlight=mount+fix
they also have the mount problem fixed in the later nero roms... should not be an issue. please let me know if this helps!
in_dmand said:
First of all, read this forum (last post is mine) http://forum.xda-developers.com/showthread.php?t=925393 - make sure you have kies or kies mini installed so that you have the correct drivers on your computer for your vibrant.
secondly, team whiskey has developed a fix for the mount issue your experiencing: http://forum.xda-developers.com/showthread.php?t=846384&highlight=mount+fix
they also have the mount problem fixed in the later nero roms... should not be an issue. please let me know if this helps!
Click to expand...
Click to collapse
Okay, so I've tried all of the above to no effect except for the latest Nero rom...
Looks like I'll be trying the latest Nero (thank goodness for Dropbox).
Nope. Updating to the latest Nero [v5] didn't work.
Anyone else?
Nvm... gl with fixing it.
All~G1 said:
Nvm... gl with fixing it.
Click to expand...
Click to collapse
I think I'm going to have to throw it under a bus...
This same thing happened to me and to fix this problem all I did was install the drivers I got online, PM me your email and ill send you the drivers
I am almost certain that it is drivers issue more than your phone or any rom. You need to completely uninstall current drivers..all traces of em, reboot and install drivers from samsung website or there are some here in vibrant section also. It happened to me couple of times where one set of drivers stopped working for no reason and i had to try couple of different ones.
I had the same problem. Phone would charge but not connect. I solved it by getting a new usb cable. I just use the bad one for charging now
Sent from my SGH-T959 using XDA App
This is a driver problem. Your computer does not have the phone drivers and is confused on what to make of your phone so it finally decides that it is a charging device more or less and will not mount it, EVEN if you select mount from your phone options.
Please look on this forum or ask the guy who posted before for the Samsung USB drivers. Install them on your computer and then mounting the phone from the notification bar will work.
Hope that helps and feel free to ask again if you are stuck on the process.
I thought it was a driver issue as well until last week.
My coworker has the same model phone and is currently running 2.2.
He has his laptop (Windows XP) setup to handle his phone.
When he plugs his equipment in, everything works. When he plugs my phone in, same old story...
Even when trying different MicroUSB cables.
This is why I'm considering loading up a different/modified kernel.
Sent from my SGH-T959 using XDA App
was messing around in cwm and formatted boot among other things i'm sure, because my phone wasn't able to be recognized by my pc due to what I believe was debugging not working... tried onecosmics ics and my debug just malfuntioned? Now I'm stuck at the Vibrant screen and although I can get into download without a problem, no computers recognize it... therefor I cannot odin. No CWM no nothing... just vibrant boot or download mode. Phones a year old, absolutely loved it and i messed up bad... If anyone can help me get her up and running through odin I will donate something to ya lol... Have all drivers needed just wont recognize... Geez I just can't leave things alone haha
thanks for reading and replying in advance
Make sure you are plugging the USB on the back end of your computer, closer to the motherboard. I never had any luck with ODIN when plugging into the front USB ports; seems not enough power goes to those.
Try a different version of ODIN. The link is available in a sticky around here somewhere. If you're entering download mode, all is not lost. I would try to click Start on ODIN just in case.
Try using the Toolbox. It has all the drivers, pit/tar files and Odin too. I use it all the time. I agree, if you can get anything to even show up on your screen, you are not "hard" bricked. Just have to find that sweet spot.
Remember that you don't have to have Download showing up on your screen, just a yellow COM box in Odin. Sometimes people forget that and freak out but I know you said it (the computer) doesn't recognize. Is this bc you are not seeing any Mass Storage devices? Just keep trying to get that little yellow box.
Edit:: Try to keep one thread on the subject so that you aren't getting confused.
I agree with the comments above.I recall going into DL mode and just hooking up the phone to the pc and it wasn't recognizing it but I flashed the 512 pit and it worked without the COM.
Try a different USB cable
You can always use linux, that's an option at this moment
I'm sorry for making two threads, didn't want people coming into the last thread and answering an old issue... I'm gonna keep trying...
I guess my days with the Vibrant are sadly over, although I can get into download mode, tried 2 cables, 3 computers... Can't get anything recognized or ODIN to work period... I'm 16 days past my tmobile warranty for the phone and they refuse to help me... onecosmics rom was the biggest mistake I made. I lost the ability to debug because of it, which is now my downfall. Nothing gets recognized and I believe it wont because debug is broken...
AIO couldn't help me... I would have much rather bricked my phone essentially than this because I would at least know where I stood and knew a Jig may work, this issue I'm having is just false hope... There are no answers anywhere that have a happy ending in my case, just threads that get left without a true method or answer, I have looked. I don't know if a Jig would work for a device that can boot in download mode but can't get recognized? I don't know anything, I just know I wish wouldn't have tried that rom and then lose my cool because of it.
We root and change ROMs because we can. We make our ****s faster or slower if we wish, i could run porn ,the newiest movies, dl songs.there is nothing better than freedom my bro
How about reinstalling the drivers while phone is connected to PC with Odin running.
And what buttons are you using to get into CWM?
I am using the standard 3 button combo for CWM cant get past vibrant logo just resets and does it again... I tried everything with odin no dice... Lol, it's my own damn fault truthfully lol... I was irresponsible in CWM due to a bit of anger and this is the result. shouldnt have formatted everything and reset. Dumb dumb dumb... especially after I knew debug was broke and disabled...
Yo are, you good finally
---------- Post added at 02:23 AM ---------- Previous post was at 02:16 AM ----------
YO if you can't fix it nOOOb,don't waste our time.I /They have gave u great advice.
---------- Post added at 02:27 AM ---------- Previous post was at 02:23 AM ----------
I say blow your phone up
Have you tried the jiggy yet? Last time, I was messing around with CWM and other ported GB and things didn't go well to the point where I got no download screen at all - just black screen after power up. Download finger combos didn't work anymore. I thought I hard brick it and about to be real brick. Since jiggy was only around $5, so I thought why not and got it off ebay (something like this one). After I hooked it in, boom I get download mode. I was so glad and didn't bother going forward anymore. I just load back old stock eclair rom with all the files in it then reload froyo.
If you odin it before, I assume driver still good. If it still good, IMO, you shouldn't try new driver. If you install other drivers over it, you can't tell if good one still there. Do you have another vibrant phone that you can hook in just too see odin and driver works good (in recognizing the phone)? This is to isolate issue if limited to your pc/odin/driver or limited to your phone only. If odin can recognize another vibrant phone, then everything on your pc is good and just need to get your phone in download mode. If your pc can't recognize other vibrant or other galaxy s phone, then it's likely your driver messed up and just need to uninstall all the sgs driver and reinstall only the one that worked for you before all this mess. I'm saying other galaxy s, because my pc was able to recognize my sister Verizon Fascinate phone and I can odin through it with the samsung driver i installed for my vibrant.
Just idea...
Thanks, but I have tried a million drivers to no avail lol... It's the ICS rom I flashed... It disabled my debug mode (although it said it was enabled). I believe with debug off, your phone is not recognized by ODIN... I can get into download mode, the only thing I need the Jig to do is get debug to be enabled lol, and I don't think it can do that?...
You ought to find another member near you and see if they can look at it. Sometimes another set of eyes can make a difference. You could also try mobiletechvideos.com. They do JTAG repairs (unbrick phones).
Penvision66 said:
Thanks, but I have tried a million drivers to no avail lol... It's the ICS rom I flashed... It disabled my debug mode (although it said it was enabled). I believe with debug off, your phone is not recognized by ODIN... I can get into download mode, the only thing I need the Jig to do is get debug to be enabled lol, and I don't think it can do that?...
Click to expand...
Click to collapse
Are you saying the "debug" inside the ICS rom? I don't think that matter, because I have ODINed mine to stock eclair rom before which has debug disabled by default if I remember correctly, then I just ODINed over other rom and it work...if that work, the debug setting shouldn't matter. Ok maybe driver...
If you strongly believe it is a driver, why not just try remove ALL samsung driver then start back with the one that work for you initially. Or use only driver from more trusted reliable site. Try one at a time. Or even reboot to safe mode and remove all the drivers. Don't install anything sparingly on your machines. Do you have another pc to try? Or have another friend with ODINed already installed w/ working samsung driver...so you reload eclair rom over it? You should have test it in VM or Virtualbox or Sandboxie.... If you can get into download mode, it should work...
Also make sure your machine is virus or spyware free. Spyware can affect other apps on your machine. If you haven't already have a good one, go to download.com and download Avast and Malwarebytes Antispyware. Then reboot into safe mode (F8), then scan virus and antispyware with both of the lattter programs. Anything it find, just delete them and keep scan until it finds 0 under safe mode. Then boot back normally and reinstall a good trusted samsung driver executable. That's what I would do if i were you.
This happened to me a while back onky thing different was my phone was working fine, but computer didnt recognize. Like others say COMPLETELY uninstall all samsung drivers, and I dont know if it will change anything for you but odin 1.7 and 1.1 didnt work for me but 1.3 was perfect, in other words try to get your hands on as many different odin files as possible, and if you have to heimdall has worked for me once before too
Sent from my SGH-T959 using XDA Premium App
Have you tried nexus s or galaxy nexus drivers yet? Your running ics you might need them....
Sent from my T959 using XDA App
update to the ICS drivers, they are in the i9000 cm thread, also then connect your phone open odin with admin privileges, install usbdeview, run it in admin privileges and uninstall any driver that starts when you plug the phone in, then un plug and plug back in your phone, should work
My phone won't seem to connect to my PC and Mac, The only other time it connected was when I had MIUI, I recently flashed AOKP ICS ROM from Task, but I can't seem to connect to my PC for File transfers, I have airdroid but sometimes I might not have wifi,
Help me Please
If this thread was already made Sorry about that
You need an app for that
dirtbikerr450 said:
You need an app for that
Click to expand...
Click to collapse
Which app would that be?
It should be under "my computer", listed as a phone instead of a drive, atleast for windows, don't know bout macs. You have drivers installed, correct?
twiggums said:
It should be under "my computer", listed as a phone instead of a drive, atleast for windows, don't know bout macs. You have drivers installed, correct?
Click to expand...
Click to collapse
With some ics roms it is broken and need an app
twiggums said:
It should be under "my computer", listed as a phone instead of a drive, atleast for windows, don't know bout macs. You have drivers installed, correct?
Click to expand...
Click to collapse
Last time I checked I did, Do you know where I can get them if I don't have them?
dirtbikerr450 said:
With some ics roms it is broken and need an app
Click to expand...
Click to collapse
I'm running the AOKP ROM ref in OP, and it's working fine for me, no additional apps.
vi3tl4 said:
Last time I checked I did, Do you know where I can get them if I don't have them?
Click to expand...
Click to collapse
Can't remember tbh, I installed them ages ago, I'll look when I get home if I've got a chance.
Can't remember tbh, I installed them ages ago, I'll look when I get home if I've got a chance.[/QUOTE]
Thanks, It'll help alot
Yeah so i'm not sure which has the drivers needed, only that it's something i obviously installed a while ago since i haven't installed anything new lately on my PC. I've got Kies installed (never really use, but it has some sort of drivers i think), i've got Android SDK tools (again, might contain some drivers), and i believe i downloaded the drivers via the samsung site as well.
The one thing i do notice is that it shows up as "GT-I9100" instead of our model under My Computer. So perhaps the drivers for the i9100 need to be installed as well?
Sorry, wish i had a more concrete answer for ya . does anything show up under your computer's device manager when the phone is plugged in? (likely something with a question mark next to it)
twiggums said:
Yeah so i'm not sure which has the drivers needed, only that it's something i obviously installed a while ago since i haven't installed anything new lately on my PC. I've got Kies installed (never really use, but it has some sort of drivers i think), i've got Android SDK tools (again, might contain some drivers), and i believe i downloaded the drivers via the samsung site as well.
The one thing i do notice is that it shows up as "GT-I9100" instead of our model under My Computer. So perhaps the drivers for the i9100 need to be installed as well?
Sorry, wish i had a more concrete answer for ya . does anything show up under your computer's device manager when the phone is plugged in? (likely something with a question mark next to it)
Click to expand...
Click to collapse
It shows up as unrecognized device, and it always says it malfunctioned, it has never worked even when I had the original samsung rom
I was kind of having the same thing happen. Computer wouldnt see my phone. Did a little research and came up with this. I deleted KIES (from what I read on here somewhere LOL) and did a search for this( used bing.com)...Samsung USB Drivers for Mobile Phones v1.4.8.0 After I loaded that everything went back to normal. Took me awhile to find that info but now Im glad I did!! Hope this helps!!
Try uninstalling Samsung drivers, reboot, and installing it again. Also be sure that the USB port is functioning. It sometimes could be the USB cable (HTC USB cable doesn't work very well with my i777 whereas Motorola's USB cable works great).
Heres the app you need
ok let me start with the problem, I have a galaxy s2 and when I plug in the usb to the phone and the pc I get nothing but a charging sound. I don,t get the little pop up in the top bar that says its connected to a usb,
now with that said I know to check the debugging the usb utilities and all those setting. I even did a factory reset to no avail. I have read many post that say update the pc drivers and even have done that. I have tried different wires that I know worked at one time and also different operating systems win7, ubuntu. I do have the phone rooted and at one time it did work. it worked best with ubuntu btw no drivers needed I don't know when it stopped working I don't use it much but one day I did go to use it and nothing.
Anyway if anyone has a suggestion out there I would be glad to hear it cuz I want to put linux on my phone with adb but cant till this issues is fix thats for you time
wat rom?,kernel?
I have standard rom 2.3.6
an kernel 2.6.35.11
Its also a SGH-T989
lodk said:
I have standard rom 2.3.6
an kernel 2.6.35.11
Its also a SGH-T989
Click to expand...
Click to collapse
So you're in the wrong forum.
SGH-T989 forum here.
Sorry, I moved it to the right spot.
Hello,
I have a very big problem with my Samsung Galaxy S3 I9300.
The problem started when my battery ran down very very fast. I can use my phone for no longer than maybe 6 hours, and that is in stand by. If I want to charge my phone till it's completely full it might take two days on the charger as well, even when my phone is off. I tried to reset my phone to factory defaults, but that didn't fix the problem. I even bought a new battery, hoping that would solve the problem, but even no luck with that. The phone also becomes hot in the bottom. Now I wanted to bring it back to the store for warrenty but there lies the next problem, my phone is rooted.
I know it is possible to unroot the phone, and it's nog too hard to do. But every time I connect my phone with USB to my computer, my computer doesn't recognize it. I get the next error message "USB device not recognized". I tried different cables, I tried on an other computer, but still I get the same error. I also tried the S3 of a friend on my computer and with his phone I do get a connection. So I know there is nothing wrong with the drivers on my computer or something like that. There must be something wrong with my phone.
Now the problems won't stop here because there is even a third problem. Like I said before I have rooted my phone, but I can't use SuperUser. When I start SuperUser it says "The SU Binary needs to be updated. Continue?". Then when I press continue I get the message "Installation failed !". I can't use CWM as well. I wanted to use Triangle Away before bringing it back for warrenty, but I can't use it because I can't use SuperUser.
If some one would have an idea to unroot my phone without using USB so I can bring it in for warrenty. Or find a way to get my USB port running again, I think that would fix my problems.
I spend a few hours trying to fix these problems, but now I've come to a point I don't know what to do anymore, I hope anyone of you is willing to help me. I'll be for ever gratefull.
Grtz Nathan...
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Mord0rr said:
Hi.
If i was you, i would try to install a official version, using Odin.
Also, my advice is not to use the original charger, Even chinese have better one´s...
Did you install Kies and drivers on your PC? Check that too.
Consider install leaked 4.2.2 version of Rom, since it uses Odin to do it.
I hope i gave at least some clues....
Click to expand...
Click to collapse
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
droogje said:
Thanks for your reply,
I forgot to mention that I have the official ROM installed, I only rooted it. But even if I would want to install a new ROM, my computer doesn't recognize my phone throug USB. So I can't install a ROM using Odin unless my USB port is running again.
I tried several chargers already, I don't think the problem lies in the charger because the battery drains very fast when it's of the charger.
I did install Kies and drivers, I even uninstalled them and reinstalled them again a couple of times. I even tried it on different computers. And the Galaxy S3 of a friend of mine does make a connection. So I don't think the problem lies there.
Click to expand...
Click to collapse
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Mord0rr said:
Hummm....
Did you try hard reset? Definitely without USB recognition, you can`t go to next stage....
In setup did you check optinos like USB debugging?
At this moment im out of options....maybe a poweruser can help you better:highfive:
Click to expand...
Click to collapse
What exactly do you mean with hard reset? If you mean powering on with home button and volume up button pushed, and then select "wipe data/factory reset". Then yes, I tried that.
In setup I did check USB debugging. The thing is, when I power on with home button and volume down button, I enter download mode. But even in download mode my computer does not recognize my phone. I'm not sure, but I think the computer should.
I'm really stuck here :crying: