Hey guys, I just got my new HTC hero. I'm with AT&T now and having the unlimited 3G data plan. I setup the configurations of APN settings as following:
Access point: wap.cingular
Username: [email protected]
Password: CINGULAR1
But I only see an "E" at the connection status which I believe indicates EDGE. Can anyone tell me how to get 3G work on this device?
Thanks a lot!!!
I didn't realise the hero was out in the us yet but if it is i don't know why and if it isn't out its because i don't think it surpports american 3g networks i think you can only get 2g.
Yes I got this phone out of the US.
So you mean there's no way at all to get 3G to work on this phone with AT&T or any other carriers?
In its current state the phone does not support the AT&T bands for 3g.
There are rumors of an AT&T version coming October 11th, that would support 3g.
European/Asian version of this phone does not work with US 3G. AT&T's 3G network requires the bands 850 & 1900, while T-mobile's 3G requires the bands 1700 & 2100. European/Asian version supports only the bands 900 & 2100.
Does this mean T-mobile 3G may work on this phone?
T-Mob's 3g should connect to this phone, if you could find a signal, haha.
http://www.androidauthority.com/index.php/2009/07/03/htc-hero-approved-by-the-fcc-with-att-3g/
Neither T-Mobile US nor AT&T will work with this phone for 3G. The only version of this phone that exists at the moment supports ONLY European 3G. There are rumors of the device coming to AT&T, but nothing confirmed. IF that happens, the new phones would work, but that wouldn't change the fact that the device you have will still only function on Edge.
Sorry to be the bearer of bad news, but it's true.
It's actually Sprint pal. Also, there was a picture for Tmobile also (this appears to be a rumor).
T-Mob uses the 2100 spectrum so i dont see why it wouldnt work.
And a CDMA and a GSM (With AT&T 3g bands) has gone through the FCC recently.
RBFG said:
T-Mob uses the 2100 spectrum so i dont see why it wouldnt work.
And a CDMA and a GSM (With AT&T 3g bands) has gone through the FCC recently.
Click to expand...
Click to collapse
No, it won't work with t-mobile USA's 3G network.
Yes, T-mobile in Europe use the 2100 band for 3G so the Hero works. But T-mobile USA use 1700 and 2100 bands for 3G, and you need a phone that support BOTH bands to connect to its 3G network.
Unfortunately, unless T-mobile USA decides to carry this phone (and they have already said that they wouldn't), there won't be a version of Hero that support its 3G network. This is because T-mobile USA is the only carrier in the world that uses the 1700 band for 3G. You may ask why T-mobile uses different bands for 3G in different countries. This is more of a regulatory decision than a business decision. If you are interested, go read about those FCC spectrum auctions.
All in all, European/Asian version of the Hero won't work with any 3G network in the US. The product id of the European/Asian Hero is HERO100, it supports only the bands 900 and 2100 for 3G. There will be a North American version with product id HERO130 that supports the bands 850 and 1900. It will be released either on AT&T or on the Canadian carrier Rogers, because only these two carriers use these bands for 3G. Currently it is not know whether it will be on AT&T or Rogers, but that latter is more likely IMO. Finally, there will be a CDMA version, with product id HERO200, for Sprint. This is more or less confirmed to be coming in October.
T-mobile US 3G uses 1700 for down and 2100 mhz for uplink. So 2100 alone isn't enough as you need both directions to connect.
tsekh501 said:
No, it won't work with t-mobile USA's 3G network.
Yes, T-mobile in Europe use the 2100 band for 3G so the Hero works. But T-mobile USA use 1700 and 2100 bands for 3G, and you need a phone that support BOTH bands to connect to its 3G network.
Unfortunately, unless T-mobile USA decides to carry this phone (and they have already said that they wouldn't), there won't be a version of Hero that support its 3G network. This is because T-mobile USA is the only carrier in the world that uses the 1700 band for 3G. You may ask why T-mobile uses different bands for 3G in different countries. This is more of a regulatory decision than a business decision. If you are interested, go read about those FCC spectrum auctions.
All in all, European/Asian version of the Hero won't work with any 3G network in the US. The product id of the European/Asian Hero is HERO100, it supports only the bands 900 and 2100 for 3G. There will be a North American version with product id HERO130 that supports the bands 850 and 1900. It will be released either on AT&T or on the Canadian carrier Rogers, because only these two carriers use these bands for 3G. Currently it is not know whether it will be on AT&T or Rogers, but that latter is more likely IMO. Finally, there will be a CDMA version, with product id HERO200, for Sprint. This is more or less confirmed to be coming in October.
Click to expand...
Click to collapse
Thanks! That was very informative, although it totally crushed my dreams of owning a Hero while remaining on the T-Mobile network.
I know telus used to be strictly cdma, however i know as of 2010 they have made some upgrades.
Does anyone know if unlocked phones such as this one:
(add http) cgi.ebay.com/MOTOROLA-DROID-MILESTONE-2-ANDROID-SMARTPHONE-UNLOCKED-/140483114173?pt=Cell_Phones&hash=item20b57234bd
would fully funcionall work on telus?
Just by looking at the supported bands it won't work on Telus or Bell. It will only work on Rogers but at EDGE speeds. The current supported bands by Telus and Bell are 3G only which are 850/1900 frequency. The only other provider in Canada which has a different one is Wind which is on the AWS 1700 frequency so T-Mobile 3G phones should work.
Telus and Bell Canada are not GSM because that refers to 2G which is a legacy network they do not have. They are 3G which all the 2G providers such as AT&T have upgraded to. Their CDMA network is still there running in parallel for now.
They use the exact same 3G system and frequencies as AT&T. So any AT&T 3G phone will also work on Bell or Telus. They do not have the legacy network so 2G phones will not work. Only 3G phones.
To put it another more technical way:
They support 3G UMTS/HSPA 850MHz and/or 1900MHz
They do NOT support 2G GSM/EDGE on any frequency
I am planning to get a 800 but it is the UK version. Would it work on Canadian frequencies? Anyone know?
No, more here:
http://www.worldtimezone.com/gsm.html
http://www.gsmarena.com/nokia_lumia_800-4240.php
Why wouldn't it?
For RM-801, you may not get HSPA+
For RM-819, you will get HSPA+
When i was in canada it worked perfectly. 3G is spotty in some areas but otherise you get 1900mhz to yourself since Canada's 3G mainly works on 850mhz.
Ive got a T-mobile Optimus T LG P509. Its been unlocked and im now using it on the ATT network. Ive been told that ATT and T-mobile Operate on different frequencies, and that it is impossible for me to get 3g signal on the p509; is this correct?
AT&T 3G frequency bands are 850/1900 MHz while Optimus T supports 1700/2100 MHz so it should not work.
AT&T 3G Bands
OptimusT 3G Bands
im from mexico, we had 850 mhz like at& for 3g (we had lte but since my carrier sucks at lte i dont care lte but hspa+ AKA 3.9G)
so im trying to check offers on ebay (really expensive for internaitonal buyers ) but i saw some t-mobile htc one, so im wondwering t-mobile sim Unlocked will work on at&t 3g bands? hspa+?
Thanks