[Q] Flashing ROM update, apps2sd issue. - Droid Eris Q&A, Help & Troubleshooting

Hi all.
I'm looking to update my version of xtrSENSE from 4.6.5 to the newest 5.0.1 version. My issue is that I have enabled apps2sd on my current version, and have far more apps installed than available stock app memory on the phone. Titanium Backup is up to date, as is a complete Nandroid+ext backup. The install instructions for the rom suggest wiping factory/data reset, dalvik cache, and ext partition. So my question is, will wiping the ext partition on my sd card cause me to lose all my apps/data? What sort of order should I follow in terms of booting, wiping, restoring, etc.
Thanks for any help in advance.

There is no reason to wipe if you are installing over another version of xtrSENSE.
See http://forum.xda-developers.com/showpost.php?p=12129548&postcount=1764

thirtynation said:
Hi all.
I'm looking to update my version of xtrSENSE from 4.6.5 to the newest 5.0.1 version. My issue is that I have enabled apps2sd on my current version, and have far more apps installed than available stock app memory on the phone. Titanium Backup is up to date, as is a complete Nandroid+ext backup. The install instructions for the rom suggest wiping factory/data reset, dalvik cache, and ext partition. So my question is, will wiping the ext partition on my sd card cause me to lose all my apps/data? What sort of order should I follow in terms of booting, wiping, restoring, etc.
Thanks for any help in advance.
Click to expand...
Click to collapse
If you pay for Titanium Backup, use the Batch option to backup all your User Apps and Data, but NOT System Data.
From recovery, wipe Factory/Data/Dalvik and flash the new xtrSENSE.
Set up the ROM with at least the basics including running the Apps2SD Gscript and so on. Reboot if necessary (don't recall if it is needed for Apps2SD but can't hurt).
Install Titanium Backup and Batch restore User Apps and Data.
Reboot again if necessary and should be 'voila!

doogald said:
There is no reason to wipe if you are installing over another version of xtrSENSE.
See http://forum.xda-developers.com/showpost.php?p=12129548&postcount=1764
Click to expand...
Click to collapse
I saw that, but I know the instructions have also said that it's always best to wipe for best results. The fact that I'm skipping a version also makes me weary of not wiping. I suppose I could try and always restore the nandroid...
Still, if I were to go about it the OCD way.. My apps are still intact in the Titanium Backup, correct? Just wipe factory/dalvik/ext, flash the new rom, set up my partition and apps2sd, then restore them all via TiB?

thirtynation said:
I saw that, but I know the instructions have also said that it's always best to wipe for best results. The fact that I'm skipping a version also makes me weary of not wiping. I suppose I could try and always restore the nandroid...
Still, if I were to go about it the OCD way.. My apps are still intact in the Titanium Backup, correct? Just wipe factory/dalvik/ext, flash the new rom, set up my partition and apps2sd, then restore them all via TiB?
Click to expand...
Click to collapse
Yes, but I would still recommend (since you have a Nandroid and a TiBu backup) to just flash over. If it's messed up, you can just go back and do a full wipe instead.
I've flashed xtrSENSE over stock and it worked just fine.

Definitely do a nandroid before whatever you try. Easiest way to get back. Otherwise, yes at least if you use Titanium Backup to backup your apps and data if you want it...

Related

[Q] Force closing problems with das bamf 2.1/mr2.5

I'll go ahead and apologize for the length of this, I just want to provide as much information as possible.
I have a rooted Thunderbolt. My original issue was that I was having numerous restarts daily, and I would drop the mobile network all the time and thus couldn't send/receive texts or calls. I posted on AndroidForums and it was suggested to me to flash the rom and update the radio. My previous phone was a rooted incredible, but this was my very first time messing with the radio and/or rom. I did a nandroid backup and followed the guides to do both. I flashed the das bamf 2.1 rom with mr2.5 radio. Everything seemed to be ok, I didn't have any weird issues, but since I am new at this, I'm not completely sure if something went wrong or not. Here is the current problem I am now having...
I can no longer sync my google calendar, I keep getting the com.google.process.gapps force close error. And I get the com.android.phone force close error as well and will loose connection with the mobile network for a few minutes. Also I cannot get any pic messages to send/receive. And I just noticed that when someone calls me, my screen turns on, but it doesn't come up with the answer call screen it just lights up, and I can't answer the call.
I have tried searching for solutions but haven't found anything to work. I fixed permissions with rom manager, and have tried toggling sync on and off on the calendar and cleared data under manage applications with no success. Is there maybe something that I missed along the way or maybe some other solution to try that anyone can suggest? Or is there any additional information that I need to provide? Thanks!
Did you use Titanium Backup to restore apps? Also did you use ROM Manager to flash ROM or did you do it directly from Recovery? Also did you wipe before flashing the ROM?
jasonxlee01 said:
Did you use Titanium Backup to restore apps? Also did you use ROM Manager to flash ROM or did you do it directly from Recovery? Also did you wipe before flashing the ROM?
Click to expand...
Click to collapse
droidforums.net/forum/thunderbolt-roms/140736-how-flash-roms-thunderbolt.html
I followed the guide on that site.... I did use titanium backup to restore the apps. I used rom manager to flash, but I did wipe before flashing (I think!). I have the new rom manager so what I did was download the zip files for the rom, move them to sd card and use rom manager's install rom from sd card, and selected backup, wipe data & cache and dalvik when prompted.
ahbrown32 said:
droidforums.net/forum/thunderbolt-roms/140736-how-flash-roms-thunderbolt.html
I followed the guide on that site.... I did use titanium backup to restore the apps. I used rom manager to flash, but I did wipe before flashing (I think!). I have the new rom manager so what I did was download the zip files for the rom, move them to sd card and use rom manager's install rom from sd card, and selected backup, wipe data & cache and dalvik when prompted.
Click to expand...
Click to collapse
Don't flash from ROM Manager. It seems to cause problems with some phones. Flash the ROM directly from Recovery (Make sure you wipe). Also when you successfully do that and everything is working, download the latest version of Titanium Backup from the market. The Titanium Backup included in the ROM caused problems for me as well. Just to be safe, download the ROM again.
jasonxlee01 said:
Don't flash from ROM Manager. It seems to cause problems with some phones. Flash the ROM directly from Recovery (Make sure you wipe). Also when you successfully do that and everything is working, download the latest version of Titanium Backup from the market. The Titanium Backup included in the ROM caused problems for me as well. Just to be safe, download the ROM again.
Click to expand...
Click to collapse
Thanks, I'll give that a shot later tonight and see if it fixes everything!
Haven't personally had any problems with RM on the Tbolt yet. Performs each function just fine. Since he said he wiped, sounds like he's restoring something from TiBu that's causing problems.
If it's lots of things with FC's:
Wipe and don't restore using TiBu. If you still get FC's then that's not the problem and you may want to reflash the rom.
If it's only a few things, you can wipe the data for those particular apps in Settings->Applications->Manage Applications
This might be off topic, but you mentioned Titanium backup. I had my first major issue with Titanium backup last night. I too am on MR2.5 and everything went fine when I flashed the ROM but after I ran Titanium backup my phone kept going to the HTC screen as if it was doing a fast boot. I ended up having to clear out all my Titanium backups and restoring my applications directly from market to get my phone back to par. I hope that helps someone.
Things that were mentioned and things to add.
*Always flash roms from CWM (Clockwork Recovery Manager) not ROM Manager
*Always do a full wipe before flashing any new ROM. That means, go into CWM, Wipe Cache Partition/ Factory reset, Wipe Data, go to advanced and select wipe davlik.
*Run the ROM for a couple minutes to test if it's running smoothly and can connect to Google market.
*If it's running well, then proceed to titanium backup.

[Q] How do I restore my data / cache after wiping and flashing villainrom?

This might be a stupid question, but is there any way to get my backup restored? I just tried to restore a backup through CWM but it wiped my villainrom flash and went back to what I had before.
Bmmaximus said:
This might be a stupid question, but is there any way to get my backup restored? I just tried to restore a backup through CWM but it wiped my villainrom flash and went back to what I had before.
Click to expand...
Click to collapse
Is that not the whole point you backup XX try ZZZ decide you dont like it and restore the backup of XX which wipes ZZZ .
jje
yes I realized that eventually, I thought the point was to save your data like apps, themes, etc. so you can load them in the new rom. my apologies
You should not restore cache. When you boot up to a new rom, it will just redo the cache anyways.
As for Clockwork Recovery backup and restore, it does a full backup of the rom, including cache and user settings and apps. It restores back to the original rom as well.
I think you want to restore your settings and applications of your old rom into villainrom. I wouldn't recommend it as it settings for stock and custom might be different and can cause weird issues.
on that note, is there any way to access that information after flashing the new rom (to see what apps i'm missing and download them all again so I don't have to just redownload each one as I realize i need it?) without restoring the backup
nevermind I ended up just going back to my old rom, thanks for the replies guys
There is this wonderful app called Titanium Backup, it backup all your wonderful apps. This way, when you switch ROMs, you can just restore all those wonderful apps that you have been stockpiling.

How to clean my SGS II ?

hello
how can I clean my SGSII ,phone SD, and external SD card from old installation files, folders,. Bla bla bla
now I have my ideal settings , ROM , everything ,
is there any way to format everything then restore CWM backup ?
thx
Backup everything (Ti, Nandroid, calls, sms, etc). Format cache, data, system & internal sd card in CWM. Flash stock rom in Odin, CFRoot to get CWM, flash rom/kernel of your choice. Then clean install your apps from Google Play/wherever you got them from (preferable) & restore calendar/contacts from Google, & restore call/sms log with whatever app you used to back them up (provided this app only backs up/restores the logs/sms themselves & not the apk like some of these apps do). You could also restore your apps with Ti (not system apps) but if you do, don't restore data.
That will give you a clean start.
MistahBungle said:
Backup everything (Ti, Nandroid, calls, sms, etc). Format cache, data, system & internal sd card in CWM. Flash stock rom in Odin, CFRoot to get CWM, flash rom/kernel of your choice. Then clean install your apps from Google Play/wherever you got them from (preferable) & restore calendar/contacts from Google, & restore call/sms log with whatever app you used to back them up (provided this app only backs up/restores the logs/sms themselves & not the apk like some of these apps do). You could also restore your apps with Ti (not system apps) but if you do, don't restore data.
That will give you a clean start.
Click to expand...
Click to collapse
can I transfer the CWM backup to PC , then transfer it again to SD card after installing ROM, and restore the CWM backup ?
btw I have two CWM backups and I'm unable to restore one of them ,.it stock on " checking MD5 sums" for a while then phone boots without restoring anything
Of course you can. But what's the point of doing a clean install if you're going to restore a Nandroid which is a copy of your setup at the time you took the backup ? Kinda defeats the purpose. If you're having problems which you think are as a result of having a lot of crap on your phone; easy to happen if you haven't done a wipe for a while/have flashed a lot, if you restore a Nandroid you're going to have the same problems.
Personally, I do the steps I suggested every 4-6 weeks (instead of flashing stock after I wipe everything I normally flash CM9 Resurrection via Odin & go from there). I find it's an hour or two well spent. Phone runs much better after.
Up to you which way you want to go tho.
gitan_reel said:
can I transfer the CWM backup to PC , then transfer it again to SD card after installing ROM, and restore the CWM backup ?
btw I have two CWM backups and I'm unable to restore one of them ,.it stock on " checking MD5 sums" for a while then phone boots without restoring anything
Click to expand...
Click to collapse
MistahBungle said:
Of course you can. But what's the point of doing a clean install if you're going to restore a Nandroid which is a copy of your setup at the time you took the backup ? Kinda defeats the purpose. If you're having problems which you think are as a result of having a lot of crap on your phone; easy to happen if you haven't done a wipe for a while/have flashed a lot, if you restore a Nandroid you're going to have the same problems.
Personally, I do the steps I suggested every 4-6 weeks (instead of flashing stock after I wipe everything I normally flash CM9 Resurrection via Odin & go from there). I find it's an hour or two well spent. Phone runs much better after.
Up to you which way you want to go tho.
Click to expand...
Click to collapse
Thx , any idea why CWM gives this message" MD5 mismatch ! "
Lots of threads on here about that (understatement); search.
gitan_reel said:
Thx , any idea why CWM gives this message" MD5 mismatch ! "
Click to expand...
Click to collapse

Easiest way to backup data to survive super wipe?

Hello,
This has been discussed in the past but a) it a long time time ago, so maybe newer tools are out and b) no definite conclusion was drawn, so please can I ask again, what's the easiest way to back up all apps, data and settings (idealy including home screen settings, ringtones, everything) to survive a superwipe (i.e. restore it after a super wipe and new ROM version installation)?
Thanks in advance.
Use CWM Recovery to do a complete backup. Very easy to backup and restore.
saheb117 said:
Use CWM Recovery to do a complete backup. Very easy to backup and restore.
Click to expand...
Click to collapse
But restoring a CWM backup will overwrite the new system with the old one. What I want is backup all data, apps and settings but not the system data. And then restore them after I install the new ROM.

[Q] CWM Recovery did not restore previous state, apps missing

Been having some issues with my SGS3 and charging, using JellyBam (v7, fairly old, so thought I would start fresh on latest version).
Using CWM5, I did a backup. Factory reset + wipe cache + wipe dalvik cache, then flashed the new ROM. Figured out what I needed to for the charging issues, but forgot I didn't to a titanium backup with all my apps, and more importantly the app data.
I can confirm looking in the CWM data.ext4.tar that the data I want is in there.
So I backed up my new flash setup, restored the previous backup, thinking I would do a titanium backup and get everything setup in my newly flashed ROM. After restore (I did another factory reset + cache + dalvik wipe first), it presents me with the google login wizard, and it seems to have remembered some of my apps but not others. So the restore seems to not have worked.
If I try reinstalling the app it gives me the 'Unknown error code during application install: "-24"' error
Any ideas how I can get the restore to work correctly?
OR some way from the fresh install (providing that restore works too) to grab the app data from my data.ext4.tar and move it into my working install? I tried just copying the file into /data/data but that didnt seem to do the trick
Old CWM
Flash the firmware you made a cwm backup of restore via CWM .
Flash Philz recovery and make a new backup .
Now get 'error while restoring /data'. Seems to be an issue on CWM5 for >2GB backups.
Going to try flashing Philz recovery and try again
Nope no joy. Is there any way I can extract data from a nandroid backup?
As I'm only really fussed about a handful of apps so could do it manually
5 355586
poppahorse said:
Nope no joy. Is there any way I can extract data from a nandroid backup?
As I'm only really fussed about a handful of apps so could do it manually
Click to expand...
Click to collapse
maybe there is the way, but is better if you make a update of your CWM,... 6.0.3 or 0.4 touch... by the way I always use two mores apps for backing up data from my SIII ... one for sms, contacts ecc.. to extSDcard "Super backup pro" and the other app for backup data apps "Ultimate backup pro"

Categories

Resources