http://forum.xda-developers.com/showthread.php?t=1010807
Got some of the thread that guide the members increase their sd card speed with some tweak on system, just wondering are that method suitable for X10i too? Or can some of my respectable dev work on the x10 xrecovery version so that x10 community will have some nice boost on their phone?
* For moderator: if this thread is deserve to the Q&A section, sry for troubling, plz help me move this to the Q&A.
I have tried SD boost tweaks slight enhancement is observed in speed SD tools show improvement in throughput
Sent from my X10i using XDA App
That script works foe me
cheers
L
anantshri said:
I have tried SD boost tweaks slight enhancement is observed in speed SD tools show improvement in throughput
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Can you write some "fix sd for dummies" guide on x10 so everyone can tweak without fear?
laill said:
That script works foe me
cheers
L
Click to expand...
Click to collapse
Is it just write a txt file and attach to the system folder? I lose my usb wire, so i would like some wireless solution.
i posted a guide on this last week
http://forum.xda-developers.com/showthread.php?t=1013554
there is a paid app in the market sd speed boost that does it all for you and sets it at boot 99p or something I have it works a treat
svtfmook said:
i posted a guide on this last week
http://forum.xda-developers.com/showthread.php?t=1013554
Click to expand...
Click to collapse
Thx, my bad, i try to search it, my key word might not accurate. Thx for the guide.
2048 works best for me.
UK X10i stock 8GB card
Sent from my X10i using XDA Premium App
Sd speed boost app works for me just fine... i didn't want to install tweaks so i install app that i can remove whenever i want
Sent from my X10i using XDA App
shoby said:
2048 works best for me.
UK X10i stock 8GB card
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
same with me, I'm using an 8gig card my friend got with his DX (pretty sure it's class 2 or legacy from before the class system). This tweak seems to have sped up my write speed by almost a full mbs/s and my read speeds have gone up even more,
4mb
For me: 16 gb ks >> 4mb>> 3.9 w>>18 r :d
I set my 8gb class 2 SD at 3456 & get this..
I'm running a Sandisk 32GB Class 2 (yup, you read that right). The SD Tool readings before the script is implemented seems to be fairly high, but they slack considerably after......
My readings are wild! Here's what I got, note that each time I run the test I use a task killer to clear running apps. Blue indicates readings prior to script implementations.
@128 - 7.7/11.9
@512 - 2.2/10.9; 2.9/11.7; 4.2/12.3; 5.7/12.3; 6.3/12.3; 6.2/12.1; 6.1/12.4
@1024 - 7.9/18.9; 6.4/12.3; 6.4/12.4; 5.3/12.3; 5.2/12.1; 2.5/12.1
@2048 - 7.8/19.8; 4.5/11.2; 8.1/11.4; 5.4/11.1; 2.2/11.7; 5.5/12.1
@3072 - 7.8/19.8; 4.4/11.3; 3.2/11.2; 2.6/11.6; 5.7/12.3; 6.4/11.7
@4096 - 8.7/21.2; 3.2/11.7; 8.4/11.8; 5.0/11.9; 2.1/12.2; 5.3/12.1
@5120 - 8.3/19.8; 8.3/12.3; 8.5/12.2; 8.5/12.0; 8.3/12.1; 8.3/12.4; 7.6/12.2
So.... I went with 5120....
This tweak is already applied in wolfbreak's ROM
I manage to set it till 3mb/s buffer, and latest version of sd tools( with improve and stability of testing speed version), had state my stock sd card (may be class 2-4?) had stable writing speed of 5mb/s (6mb max, but quite uncommon), and with 20mb/s reading speed, which looks more sense than previous diagnose than 3mb/s of writing speed and reading of FREAKING 50 mb/s of speed.
Overall, yes, it match the rumor, it "SLIGHTLY" improve the speed of SD card, but better than nothing ~hey!!!with the moded stock camera i and better writing speed of sd card, I manage get a better FPS on HD recoding, now i can throw my wvga out to my android.
my ressults :
Write speed: 377.7 MB/s
Read speed: 1.524 MB/s
Sony ericsson X10 i - SU08G
Related
I'm having some serious lag on my class 10 32GB card and it takes like 10 seconds to load gallery. This started on the Ba2tf cm7 rom. It didn't do it before. I'm guessing the read ahead is below 3072KB. Otherwise I suppose I/O is lacking on the latest CM7 rom?
thanks
It took me 4 seconds to load the Gallery with a 32GB class 4 on Weekly 4, not too bad. It only takes half a second with QuickPic though and I like QuickPic better anyways.
I think you want SD Speed Increase from the market.
Sent from my MB860 using xda premium
Thanks! On the previous build it was always instantly fully loaded. This class 10 card really performs excellent. It's a Wintec from newegg and I get about 15MB/s writing from windows 7. On smaller files it'll down to like 5MB/s but that's normal I suppose. Anyway I'm thinking either I/O rates are poor in the latest stable release or the read ahead it at like 1024KB. At least from my tests on my HD2, I always saw best performance and instant gallery loads at 3072KB, at least on my class 10 card.
I'll give that market app a shot. They usually have to be compatible with the kernel. We will see.
Thanks
1chris89 said:
Thanks! On the previous build it was always instantly fully loaded. This class 10 card really performs excellent. It's a Wintec from newegg and I get about 15MB/s writing from windows 7. On smaller files it'll down to like 5MB/s but that's normal I suppose. Anyway I'm thinking either I/O rates are poor in the latest stable release or the read ahead it at like 1024KB. At least from my tests on my HD2, I always saw best performance and instant gallery loads at 3072KB, at least on my class 10 card.
I'll give that market app a shot. They usually have to be compatible with the kernel. We will see.
Thanks
Click to expand...
Click to collapse
Currently works on my phone no problem.
Sent from my MB860 using xda premium
d3athsd00r said:
Currently works on my phone no problem.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
yeah, performance seems poor when copying flac music files that are like 20-40MB per file say 1.5GB worth. I get like 5MB/s when on that last stable cm7 release I'd see up to 8-9MB/s on FLAC files writing from windows 7. I got up to 18MB/s write on big files and on the Ba2tf I'm getting like 12-15MB/s. I just wonder what happened to the I/O system on the ba2tf build over the previous? I guess I may be alone on this, or no one cares or notices a 3-5MB/s reduction in writes from windows 7. I'm running a Wintec 32GB class 10 card. I'll stick with ba2tf since there are a few minor improvements however there are some I/O rate losses so it's a hard choice for me. I'll reinstall the last build again and test it out and then compare.
Later
BTW - 3072KB seems to work ok. Looked like by default it was at 128KB?!?
So, everybody(somebody)((nobody)), explain to me the advantages of ext4 w/o journaling. I understand that write speeds for sd cards(?) is supposed to be better. My question is, where do we see the advantages? I ran an antutu benchmark on my phone and the write speeds were not the insane 150mb/s-ish write speed scores that Neutrino did when he posted that photo on his thread a while back, something more like a class 10 score IIRC. Anybody that can shed some light on this will receive my thanks!
Running Neutrino v2.0 EE
Nick
Take a look at this post http://forum.xda-developers.com/showthread.php?t=1010807.
He explains well about boosting sd cards speed. You can do that by using Rom Toolbox which you can download in the Market. If you want to try it with Rom Toolbox, it's under Performance -> SD Boost and you'd like to change the default value, normally 128, to 1024 or 2048.
nickvisel said:
So, everybody(somebody)((nobody)), explain to me the advantages of ext4 w/o journaling. I understand that write speeds for sd cards(?) is supposed to be better. My question is, where do we see the advantages? I ran an antutu benchmark on my phone and the write speeds were not the insane 150mb/s-ish write speed scores that Neutrino did when he posted that photo on his thread a while back, something more like a class 10 score IIRC. Anybody that can shed some light on this will receive my thanks!
Running Neutrino v2.0 EE
Nick
Click to expand...
Click to collapse
Everything just runs faster and smoother. You may not notice it, but if you revert back to a stock ROM, you will feel frustrated as it'll feel much slower/choppier.
And those insane write speeds were due to GT-S mod, not because of Ext4.
Ahh that was my blunder. Thanks for clarifying.
Sent from my MB860 using XDA App
Greetings.
I use a 8 GB Class 4 MicroSD card on my SGP 5.0 and while I'm listening to podcasts, which are saved on said card, and I start to do some other things, like browsing web pages, the whole system freezes and the only thing I can do at that point is to do a soft restart pressing down the power button for 10 seconds or so.
I'm thinking that the transfer speed of my MicroSD card is not good enough.
Since I have no experience with speed rates and classes, do you think a Class 10 card would solve my problem?
Thank you.
Sent from my YP-G70
I would rather say that maybe some apps had caused high occupancy rate of cpu ，since apps are commonly installed on internal sdcard.(This sdcard seems to be class6)
Probably the issue lays on read speed because I only have freezes when there's an app reading constantly files from the external MicroSD card even if that app is installed on internal memory.
Sent from my YP-G70
I've always used a class 4 card without issues.. I've also tweaked the SD card so it's hitting class 6 speeds.
Does the device even have the capability to use a class 10 card to it's fullest potential?
Perhaps you haven't had any issues because of your tweaks. I would like to try that for mine, so if you don't mind, could you share a guide or a place where I can learn to do that?
Thank you in advance.
Sent from my YP-G70
I use "SD Tools" from the market to test speed. Go test the stock settings and see what you get. Then I use "System Tuner Pro" to adjust the SD card cache size under the "tweaks". Change it, go back to SD Tools and see what your speeds are.
I've gotten the best performance around 1024, YMMMV.
Nice instructions. I appreciate it.
Thank you very much kind sir.
Sent from my YP-G70
I did the changes and tests, this is what I got:
Before:
Read: 19.6
Write: 13.5
After:
Read: 29
Write: 14.1
Let's see if this solves my issues.
Sent from my YP-G70
Not a problem! Good luck!
Hi,
I noticed many ppl here increasing internal sdcard of streak5.
I also plan to do so. But more willing to know what are the benefits of it and if a negative point.?
Basically why to change internal sdcard
i will appreciate if those of you who have done it could post here your exp.
Bump
Sent from my Dell Streak using xda premium
well... actually nothing much you can gain except that the internal space for apps and cache have been increased with larger capacity...
i myself use the 8gb class 10 microsdhc for now (which currently i have 6gb plus of extra DATA capacity)... if you want to use 16gb or even 32gb, you can but the problem is, how to utilized the extra space gain...
and you might need to use the modified boot.img so that streak would recognized the extra capacity... 8gb and below is recognized by default... therefore, i would stick with the 8gb...
many of your future question usually have been answered many times, so please do a search bout it... thanks
deysmacro said:
many of your future question usually have been answered many times, so please do a search bout it... thanks
Click to expand...
Click to collapse
EXACTLY
Sent from my cm_tenderloin using Tapatalk 2
Li'l smoother than the stock..good for bump up Antutu quadrant score
I'm still running a sandisk 32 gig class 4 card. While getting ready for ICS I backed up everything, including copying the card to my PC. I noticed how much stuff is on it from apps and such, that it makes me question....
Does the microSD card speed have any impact on how the bolt performs? Will it be faster or have less lag with one of those newer Sandisk UHS cards?
The only benefit you will see is faster read write speeds to the SD card. You would probably have to increase the read ahead buffer to get the full benefits.
Sent from my ADR6400L using Tapatalk 2
disconnecktie said:
The only benefit you will see is faster read write speeds to the SD card. You would probably have to increase the read ahead buffer to get the full benefits.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
And that is part of my question.
I guess my thought process is... With the newer card having faster read/write speeds, I would think that any access the phone does of data/apps stored on the car might be faster. And with all the .Android_secure, android and other files/folders the bolt stores on the card (as opposed to internal memory), that isn't pictures or ring tones, I was wondering if it could make a noticeable impact on the performance of the phone or installed apps.
Has any one tried? Is there a way to measure or verify any improvements? I guess I'm looking for reassurance it will make a worth while difference before I go an spend money on another card.
As for the read ahead buffer, is that something that is easy to modify? how would that be done?
It in theory would make viewing pictures and stuff on the sd card faster. As for apps I'm not real sure. You can download apps like Rom toolbox that let you change the read ahead buffer but I think the thunderbolt maxes out at 4096. Anything faster will just default to that speed. To test it use one of the benchmark apps like antutu.
Sent from my ADR6400L using Tapatalk 2