Capacitive touch buttons acting out - G Tablet Q&A, Help & Troubleshooting

My g tablet is acting as if I was touching all the capacitive buttons at the same time. Impossible to work with it.
Thinking of opening it

I'm having the same problem. For now I've disabled the buttons with Button Remapper. VeganTab has most of those buttons on top so that works for me.. and I have Button Savior for full screen apps.
I would like to know what's up with our GTablets though.
Does yours act like this? [Can't post links yet]
youtube .com/watch?v=_8SQIVz3WT4 [remove the space before .com]

I couldn't open the link.
Mine is doing it while in clockworkmod

Ivanthompson said:
I couldn't open the link.
Mine is doing it while in clockworkmod
Click to expand...
Click to collapse
Mine too. The volume and the power buttons work.
When I am in Vegan, my wifi show 0% and my battery is dead. But I can surf the web and I still can charge and discharge the battery with no problem. My Accelerometer (the auto screen rotation) also died on me.

Related

Capasitive Buttons Problem

Hey is anyone else having issues with the 4 buttons not lighting up properly, or at all. When I restart the phone its fine but as soon as I go past the locksxreen the buttons no longer light up until the next restart....
Is it just me or does it seem HTC didn't really take quality control into account with this device?
cubebuddha said:
Hey is anyone else having issues with the 4 buttons not lighting up properly, or at all. When I restart the phone its fine but as soon as I go past the locksxreen the buttons no longer light up until the next restart....
Is it just me or does it seem HTC didn't really take quality control into account with this device?
Click to expand...
Click to collapse
Those buttons use the light meter. Go to a dark room and turn on your phone and see if they light up.
No they aren't responding to light changes...
Capacitive buttons are all fine on mine. Haven't seen any issues. Only had it for half a day though.

Weird accelerometer problem(s)

The accelerometer on my Razr Maxx works promptly and perfectly except under two conditions. The first -- if I'm lying down, say on a couch or in bed, and holding the device over my head facing down. In this position the device will almost immediately shut off over and over. It won't reboot, just shut down. I can always restart it the same way I would from any "sleep". I can get the device to stay on merely by rotating it to face "up" no matter whether I change position or location or run or do not run any particular application. Is this common? Is it by design for some reason? The second -- if I have Button Savior installed, the Maxx accelerometer will work but there will be a significant delay in responding. Like 15-30 seconds delay! No Button Savior - no delay. Install Button Savior - delay. Uninstall Button Savior again - no delay. This troubles me as I really like Button Savior even on devices that have "hard" buttons. Having these controls right under my thumb is the fastest way to navigate, for me. Button Savior (updated) works perfectly for me on other Android phones, on my rooted Nook Color (CM7), even on my rooted Nook Touch. Any cures for either ill?
Hi
The accelerometer issue... does this happens from the first day you bought it? I trying searching similar issues, could not find anything. I am almost sure it is physical defect of some kind, you should probably take it back for replacement.
I don't know if the accelerometer issue related to Button Savior began when I first installed the app (as opposed to coming from a particular app update, for instance) as it took a long process of elimination to find the connection. As to the "upside down" issue I believe it has always done that. However -- it only does it if I TURN ON the device while it is upside down. If I start using it facing up, say watching a video, and then turn it upside down the video continues to play flawlessly. Bizarre!
I know there is an option to use the light sensor to detect when your phone is in your pocket, and turn off. Maybe it's on on your phone, and it's detecting lower light when you flip it over and shutting the screen off?
ok, so i misunderstood the issue, i thought the phone turns off completely...
if it only goes into "silent" or "lock" mode... maybe you installed some kind of app that does that when you flip? or maybe your player has one of those settings? like... say you are in a meeting, with your phone on the table, it rings... you just flip it and it goes silent.... some android build have that as a default setting already...
here, check this so u understand better what i mean :
http://www.appbrain.com/app/flip4silence/org.failedprojects.flip4silence
hope this helps!
tried updating yet? i had the same problems prior to the 65.1.40 update

Backlight Hardware Buttons

Since I bought my Atrix, the lights of the buttons are like on the image below: back and search are fully dark. On full brightness, is OK (but menu and home is always a little brighter)
Is it normal? Until today I did not mind because the button work OK and I don't want to send to assistance only for that.
Does anyone know what can be? At my research, I found that the backlight of buttons is the same as the screen , right?
hunff said:
At my research, I found that the backlight of buttons is the same as the screen , right?
Click to expand...
Click to collapse
Nope, not at all. Those are two backlights controlled separately.
No idea what's going on with yours. As far as I know, soft buttons are backlit with a few white LED-s, I guess some of yours are just giving out.
Mines the same on CM10.
Sent from my Nexus 7 on official CM10

[Q] Home and back buttons randomly don't work when rotated

Upgraded to CM11, but had this on 10.2 as well. Back and home buttons are rendered inoperable depending on how NT is positioned (rotated). Really annoying and I know they aren't shorted because BACK works in one position but not the other, same issue with HOME. Anyone know of a fix?
Anybody?
you're talking about the onscreen buttons in android, right? i've never had any issues
that happen to me
I had that same problem when I change the dpi from 160 to 265 and that when it happen to me. It took me a day or two before I realized what causes It but when I change the dpi back to 160 my buttons started to work just as they did before.I hope this helps you with your fix.good luck
Well I don't know if it's your case, but this happened to me as well, and I found that I had dead zones in touchscreen exactly where on screen home and back buttons are, the only way I could use home and back buttons again was rotating the screen to upside down portrait (I could not pull down controls menu in this position since that part of screen was dead) or in landscape.
How I found out: download this app. from Google Play https://play.google.com/store/apps/details?id=com.rn.yamtt, turn your tablet to landscape so on screen buttons will change positions. Open the app. and select paint tester and move your finger on the part of the screen where the on screen buttons wasn't working in portrait mode.
If you have dead zones like me, the app. won't paint the area where you are moving your finger because the touchscreen is dead in that area.
Also, my nook developed another problem after this, it won't charge, and when I plug the power cord, tablet crashes and reboots and stay in a bootloop unless I remove the cable. I'm 100% sure the cable and charger are ok, my nook suddenly started to show a lot of problems, I'll miss my nook =/
so what did you do to fix it?
F. Gacrux said:
Well I don't know if it's your case, but this happened to me as well, and I found that I had dead zones in touchscreen exactly where on screen home and back buttons are, the only way I could use home and back buttons again was rotating the screen to upside down portrait (I could not pull down controls menu in this position since that part of screen was dead) or in landscape.
How I found out: download this app. from Google Play https://play.google.com/store/apps/details?id=com.rn.yamtt, turn your tablet to landscape so on screen buttons will change positions. Open the app. and select paint tester and move your finger on the part of the screen where the on screen buttons wasn't working in portrait mode.
If you have dead zones like me, the app. won't paint the area where you are moving your finger because the touchscreen is dead in that area.
Also, my nook developed another problem after this, it won't charge, and when I plug the power cord, tablet crashes and reboots and stay in a bootloop unless I remove the cable. I'm 100% sure the cable and charger are ok, my nook suddenly started to show a lot of problems, I'll miss my nook =/
Click to expand...
Click to collapse
wedmiston said:
so what did you do to fix it?
Click to expand...
Click to collapse
Nothing since this has no fixes, part of the touchscreen is simply dead, unless a miracle happens, I even tried to restore stock nook rom, opened my tablet to check if there is a loose cable or something.
Is this happened to you in the same day you opened this thread? If your answer is yes, this sounds funny, because it's exactly the day when this small part on left bottom of the touchscreen died in my nook.
Also, somewhat my tablet started to charge again, but very slow, like USB charging, but I'm happy my nook returned to life.
No this happened many weeks before the thread. All of a sudden both home and back touches no longer worked in portrait position, but DO work in Landscape. Annoying.
F. Gacrux said:
Nothing since this has no fixes, part of the touchscreen is simply dead, unless a miracle happens, I even tried to restore stock nook rom, opened my tablet to check if there is a loose cable or something.
Is this happened to you in the same day you opened this thread? If your answer is yes, this sounds funny, because it's exactly the day when this small part on left bottom of the touchscreen died in my nook.
Also, somewhat my tablet started to charge again, but very slow, like USB charging, but I'm happy my nook returned to life.
Click to expand...
Click to collapse
wedmiston said:
No this happened many weeks before the thread. All of a sudden both home and back touches no longer worked in portrait position, but DO work in Landscape. Annoying.
Click to expand...
Click to collapse
Did you made the check I mentioned before? Does the back and home buttons works if put your tablet in upside down position so portrait mode will move soft buttons to the top edge?
Yes - all three DO work when I flip it upside down in portrait. Is this my workaround?
F. Gacrux said:
Did you made the check I mentioned before? Does the back and home buttons works if put your tablet in upside down position so portrait mode will move soft buttons to the top edge?
Click to expand...
Click to collapse
wedmiston said:
Yes - all three DO work when I flip it upside down in portrait. Is this my workaround?
Click to expand...
Click to collapse
Unfortunately, you have the same problem as me - dead zone in touchscreen. Flip the tablet upside down in portrait or use in landscape are the only workaround afaik. I thought in moving the on screen buttons more to the right in a zone where the touchscreen is working, but I didn't find a way to do this, I managed to move them a little bit by adding more buttons in the bar in system settings, but the back button would still stay in the dead zone, them I switched home and back buttons positions (so home stays in the dead zone) since you can still use the tablet N button to use home function.

capacitive button issue

This morning I started having an issue with my edge.
Whenever I touch the screen, both capacitive buttons light up. Causing for irregular behaviour when using the phone. Is there a screen calibration mode or should I return it for a new phone.
Mine does the same thing. I'm pretty sure that's standard.
Agreed. Sounds like normal behavior to me.
I fail to see how this is an issue?
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
And for reasons unknown, every s6 excluding the att version has had the setting to turn off the lights removed.
paddylaz said:
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
Click to expand...
Click to collapse
That is not true.
The S5 cap lights also light up when you touch the screen. That is how it should work. It would ridiculous for it to NOT light up every time you interact with the phone (assuming you wanted them on at all).
It would be nice to have the option to turn them off. That doesn't make it an issue--more of a feature request.
paddylaz said:
It's an issue in the sense that previously on galaxy models they only light up when you press them. It's a bit ridiculous and waste of battery to have them lighting up every time you interact with the phone.
And for reasons unknown, every s6 excluding the att version has had the setting to turn off the lights removed.
Click to expand...
Click to collapse
They really don't use any noticable battery.
cpshoemake said:
It would be nice to have the option to turn them off. That doesn't make it an issue--more of a feature request.
Click to expand...
Click to collapse
If you enable power saving mode it turns them off FWIW.
Fix for this issue
Hi,
please check my reply in the S6 thread on the same issue: http://forum.xda-developers.com/showpost.php?p=60009456&postcount=12
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Some times my capacitive buttons stop working altogether. It happened to me twice so far. It lasts about a minute. No response no light, nothing. Anyone else?
asolo157 said:
Hi, I have the S6 Edge. The touch key lights are not working at all. In Settings I have the Touch Key Light duration set to "Always On". Power Saving Mode is off, but they still won't come on. The keys do blink briefly during startup, so I do know they physically work. Any ideas? Thanks
Click to expand...
Click to collapse
Where are you finding the "Touch Key Light" settings? I don't seem to see them.
---------- Post added at 08:28 AM ---------- Previous post was at 08:27 AM ----------
mrnovanova said:
Some times my capacitive buttons stop working altogether. It happened to me twice so far. It lasts about a minute. No response no light, nothing. Anyone else?
Click to expand...
Click to collapse
Yes, I am having the same issue. I thought it might be an app but I have removed all of them and it still happens. So annoying!! Even a reboot doesn't help.
Settings-Device-Display-Touch key light duration
Dr. Bamboozle said:
Settings-Device-Display-Touch key light duration
Click to expand...
Click to collapse
that option is NOT on the 925T
wase4711 said:
that option is NOT on the 925T
Click to expand...
Click to collapse
This is not on the SM-G925W8 version either.
Sometimes these buttons stop working all together and sometimes they both switch to become the task switcher button. The Back Key will no longer function to move you back a page! Very annoying. I am thinking the only fix might be a complete factory reset??
BTW, when this happens, something is loading in the background. Just before my buttons stop working, a get a very small vibration similar to when your device boots up. From that point forward the buttons don't work. It can last 1/2 hour or up to 2-3 hours before it clears itself up??
Update: I did a factory reset and it didn't do any good. There are literally thousands of posts on the web about this issue and no resolution. If you have this issue, I think you need to send your unit back.
I have a SAMSUNG-SM-G925A running stock AT&T Android 5.02
I dunno, received my Edge today and my capacitive buttons only light up when I click them.
I took my phone back today and Rogers very quickly gave me a replacement phone. Capacitive buttons working well on this one!!
Everything was working as expected and the two buttons (Back and running apps) stopped working, i made a factory rest and it did not help, I am suspecting the cover that have magnets in it and I removed it, shut down the phone for few minutes but it did not help, I will try extending the time it is shut down and see the results.
For those with button light issues try this app "Galaxy Button Lights". I'm not allowed to post external links here but you can find it in Google Play.

Categories

Resources