[Q] Home and back buttons randomly don't work when rotated - Barnes & Noble Nook Tablet

Upgraded to CM11, but had this on 10.2 as well. Back and home buttons are rendered inoperable depending on how NT is positioned (rotated). Really annoying and I know they aren't shorted because BACK works in one position but not the other, same issue with HOME. Anyone know of a fix?

Anybody?

you're talking about the onscreen buttons in android, right? i've never had any issues

that happen to me
I had that same problem when I change the dpi from 160 to 265 and that when it happen to me. It took me a day or two before I realized what causes It but when I change the dpi back to 160 my buttons started to work just as they did before.I hope this helps you with your fix.good luck

Well I don't know if it's your case, but this happened to me as well, and I found that I had dead zones in touchscreen exactly where on screen home and back buttons are, the only way I could use home and back buttons again was rotating the screen to upside down portrait (I could not pull down controls menu in this position since that part of screen was dead) or in landscape.
How I found out: download this app. from Google Play https://play.google.com/store/apps/details?id=com.rn.yamtt, turn your tablet to landscape so on screen buttons will change positions. Open the app. and select paint tester and move your finger on the part of the screen where the on screen buttons wasn't working in portrait mode.
If you have dead zones like me, the app. won't paint the area where you are moving your finger because the touchscreen is dead in that area.
Also, my nook developed another problem after this, it won't charge, and when I plug the power cord, tablet crashes and reboots and stay in a bootloop unless I remove the cable. I'm 100% sure the cable and charger are ok, my nook suddenly started to show a lot of problems, I'll miss my nook =/

so what did you do to fix it?
F. Gacrux said:
Well I don't know if it's your case, but this happened to me as well, and I found that I had dead zones in touchscreen exactly where on screen home and back buttons are, the only way I could use home and back buttons again was rotating the screen to upside down portrait (I could not pull down controls menu in this position since that part of screen was dead) or in landscape.
How I found out: download this app. from Google Play https://play.google.com/store/apps/details?id=com.rn.yamtt, turn your tablet to landscape so on screen buttons will change positions. Open the app. and select paint tester and move your finger on the part of the screen where the on screen buttons wasn't working in portrait mode.
If you have dead zones like me, the app. won't paint the area where you are moving your finger because the touchscreen is dead in that area.
Also, my nook developed another problem after this, it won't charge, and when I plug the power cord, tablet crashes and reboots and stay in a bootloop unless I remove the cable. I'm 100% sure the cable and charger are ok, my nook suddenly started to show a lot of problems, I'll miss my nook =/
Click to expand...
Click to collapse

wedmiston said:
so what did you do to fix it?
Click to expand...
Click to collapse
Nothing since this has no fixes, part of the touchscreen is simply dead, unless a miracle happens, I even tried to restore stock nook rom, opened my tablet to check if there is a loose cable or something.
Is this happened to you in the same day you opened this thread? If your answer is yes, this sounds funny, because it's exactly the day when this small part on left bottom of the touchscreen died in my nook.
Also, somewhat my tablet started to charge again, but very slow, like USB charging, but I'm happy my nook returned to life.

No this happened many weeks before the thread. All of a sudden both home and back touches no longer worked in portrait position, but DO work in Landscape. Annoying.
F. Gacrux said:
Nothing since this has no fixes, part of the touchscreen is simply dead, unless a miracle happens, I even tried to restore stock nook rom, opened my tablet to check if there is a loose cable or something.
Is this happened to you in the same day you opened this thread? If your answer is yes, this sounds funny, because it's exactly the day when this small part on left bottom of the touchscreen died in my nook.
Also, somewhat my tablet started to charge again, but very slow, like USB charging, but I'm happy my nook returned to life.
Click to expand...
Click to collapse

wedmiston said:
No this happened many weeks before the thread. All of a sudden both home and back touches no longer worked in portrait position, but DO work in Landscape. Annoying.
Click to expand...
Click to collapse
Did you made the check I mentioned before? Does the back and home buttons works if put your tablet in upside down position so portrait mode will move soft buttons to the top edge?

Yes - all three DO work when I flip it upside down in portrait. Is this my workaround?
F. Gacrux said:
Did you made the check I mentioned before? Does the back and home buttons works if put your tablet in upside down position so portrait mode will move soft buttons to the top edge?
Click to expand...
Click to collapse

wedmiston said:
Yes - all three DO work when I flip it upside down in portrait. Is this my workaround?
Click to expand...
Click to collapse
Unfortunately, you have the same problem as me - dead zone in touchscreen. Flip the tablet upside down in portrait or use in landscape are the only workaround afaik. I thought in moving the on screen buttons more to the right in a zone where the touchscreen is working, but I didn't find a way to do this, I managed to move them a little bit by adding more buttons in the bar in system settings, but the back button would still stay in the dead zone, them I switched home and back buttons positions (so home stays in the dead zone) since you can still use the tablet N button to use home function.

Related

[Q] Stuck on rotate vibrant

Hello all.
Not much of a poster but i would like to see if i can get some help with my phone.
I've had it rooted and running Trigger for a couple months now......but recently i came into a problem. The phone will go into landscape mode on its own and sticks there.
It wont rotate back no matter what i do.
Yes i've tried toggling the auto-rotate settings but it still wont rotate back.
The only way i can get it to go back to vertical is by reflashing the rom, but it doesn't take long before it goes back. I've also tried flashing other roms but same problem.
It's really starting to get frustrating and i don't know what to do. Any thoughts?
Have you tried re-calibrating? Go to Settings>Display>Horizontal Calibration and let it do its thing. I ran into this with trigger and later, project v.
You mean anytime in landscape mode it locks that way? Like when using the camera or watching a movie? Or it only locks when using landscape on the home screens?
that sounds like a hardware problem to me but maybe if i knew more about what your doing i could say otherwise. there are sensors inside your phone that tell it when it is sideways, upside down, rightside up. not that i encourage this but...... have you tried bumping it off of a table to see if it flips back? maybe the sensors are acting up???

[Q] Strange screen problem

Hey, I was just playing with my phone this morning and noticed a strange problem... The top part of my screen, just under the notification bar, does not respond when touched, if an app is running. For example, I cannot hit the location/search/layers button in gmaps, or the search button in market (this is only in portrait mode btw), but on the main screen, it responds just fine. This problem did not exist yesterday either, and I have already tried rebooting, and that did not fix it...
Might want to provide a bit more info if you want help.
I.e. What rom are you using, what kernel, any speedtweaks, etc.
Oops, sorry, it just seemed to fix itself randomly, but I am running CM7 1.2/MR2 radio, no other tweaks, just in case anyone else has the same issue in the future...
NoHesHere said:
Hey, I was just playing with my phone this morning and noticed a strange problem... The top part of my screen, just under the notification bar, does not respond when touched, if an app is running. For example, I cannot hit the location/search/layers button in gmaps, or the search button in market (this is only in portrait mode btw), but on the main screen, it responds just fine. This problem did not exist yesterday either, and I have already tried rebooting, and that did not fix it...
Click to expand...
Click to collapse
Im hoping it was just a fluke for you, but keep an eye on the issue, if it happens more it would sound like you could have a bad digitizer (its what controls the touch screen)
So it happened again today, not sure what set it off, but this time it wasn't just the top part of the screen. Phantom presses would happen, the notification bar would go halfway down and then pop right back up, the 4 buttons on the bottom wouldn't respond... I did a battery pull, and it seems to have fixed it for now, should I be contacting verizon to replace this one? It is a replacement of my original one (which bricked)...

[Q]Anyone got intermittent problems getting the dock/keyboard working

My dock (I'm from the UK so dock and tablet come together as one package) only seems to fully work about 25% of the time. Most of the time when I connect it I don't get a mouse pointer and I can't use it to type :-( The tablet recognises the dock being connected as in the notification area it says "You can now use the keyboard to type" and the tablet charges from the dock. However, only the top row of the keys do anything - so I can lock it, mute the sound, turn off wifi etc fine, but none of the other keys work. The other 25% of the time when I connect it the mouse pointer instantly appears and I can type fine. The bar always goes to the lock position, so I'm assuming I am connecting it correctly.
Apart from this the tablet works fine - no dust or dead pixels, good wifi, minimal light bleed, so I'd rather not return it and get another one with other issues. maybe a loose connection on the dock?
Anyone else with the same issue, or who can help?
I had some problems with the dock functioning, but it seems to have gone away after plugging/unplugging a few times. Now it seems fine.
I am also from the UK and have the same problem I have tried to remove the dock a few times and sometimes it works. It never worked first time. The table is perfect with Bluetooth and GPS working. My main problem is that it takes ages to boot up compared to my 101, about 4 times as long. I will wait a couple of weeks see if an update sorted it then return the thing back to Comet.
No problems here. Did you guys get the firmware update? I am using MobileDock version TF201-DOCK-0206, that got pushed to me the first time I docked my TFP.
Bimboy said:
No problems here. Did you guys get the firmware update? I am using MobileDock version TF201-DOCK-0206, that got pushed to me the first time I docked my TFP.
Click to expand...
Click to collapse
Bimboy
Yes I have the same version TF201-DOCK-0206 thanks for the reply
I'm from Austria, but got the package with tab and dock too, i think thats regular in EU. I have no problems with my dock. Maybe you've pressed the "disable mousepointer" button? it's next to the bluetooth button on the dock
theSpawnAT said:
I'm from Austria, but got the package with tab and dock too, i think thats regular in EU. I have no problems with my dock. Maybe you've pressed the "disable mousepointer" button? it's next to the bluetooth button on the dock
Click to expand...
Click to collapse
Thanks, Hadn't noticed that button. If the dock isn't working (which is about 75% of the time) and you press that button to disable the mouse pointer and then press it again to reenable it, the mouse pointer will work for a short time, but the keyboard still won't work in this scenario. If you leave the mouse pointer to disappear you can't get it back again until you press that button twice again.
So its still not working properly but there can't be much wrong with it if you can press a button to get the pointer on again. Maybe it will be fixed by the ics update on thursday?
Mine has a little issue where after not using it all night the dock will not funtion. There is no mouse pointer at all. Once I pull it off the dock and put it back on it works just fine the rest of the day. Anyone else have this issue?
Got it working again by rebooting and then re-docking a couple of times (typing from it now). Been working for 30 mins - scared to leave to go into sleep mode in case it fails again ;-)
Closing and opening the hinge seems to help, but probably best wait for todays update before worrying too much!
Got this from ASUS support today;
Could you please await the firmware update that is due to be released this comming thursday?
If the firmware update has failed, please back up all your data and try the recovery back to factory settings as per instructions below:
1. Press and hold the power button and choose <Ok> to shut down.
2. Remove any SD cards from the Eee Pad.
3. Press and hold the <Volume Down> button, then press and hold the <Power> button. Keep pressing them both until you see white writing on the screen. You may then release them.
4. Wait five seconds until you see an icon in the middle of the screen labeled "Data Wipe".
5. Use the <Volume down> button to highlight "Data Wipe"
4. Press the <Volume up> button to execute the process.
6. After the "Wipe Data" process finished, it will automatically reboot and start normally.
Didn't do a wipe, but I'm still seeing this occasionally after updating to ICS 9.4.2.7. Open/Close seems to persuade it to work.
Select Asus keyboard as input and the keyboard will work. EOT
Changing the keyboard setting doesn't always work. Sometimes the special/shifted keys get mapped wrong too. It's all related, but some point in the process seems unreliable.
Mine does the same thing. I have to reboot the tablet while off the dock and then plug it in at times for it to work.
Same here. Bought from PC World in UK.
Is this a software issue? If not, I'll get it swapped.
I have the same problem with the dock, i tried everything. Hardreset , factory reset, reboots with and without dock on prime but nothing changed at all, the dock is working about 10% of the time and that is completely random.
There doesnt't seem to be a loose contact between dock and prime, because I tried to move around the dock and the prime in every direction while they were connected and the keyboard was working at that time without problems and without losing connection or an error message.
As soon as I'm working with the dock for a few minutes or when the Prime (while connected to the dock) is turned back on from sleep mode, either the dock's keyboard or the touchpad or sometimes both stop working.
I'm using the DE version of Android 3.2.1 as firmware,
ankhazam said:
Select Asus keyboard as input and the keyboard will work. EOT
Click to expand...
Click to collapse
Nope! ASUS keyboard is already selected - I've tried every combination of keyboard it makes no difference to the functionality of the dock. full keyboard only works 10% of the time, mouse pointer only works about 25% of the time, the top row of keys works 75% of the time, and dock charges the tablet 75% of the time.
On the odd occasion when all the keys do work, they only work for up to 30mins or so, or until it sleeps :-(
A user on transformerprimeforums.com as tried a different a second tablet with his dock - and it worked fine. Which assumes his tablet is the issue? Which is a bit weird as I would have assumed an issue with the dock. Anyway, mine is going back (both tablet and dock as it's one package in the UK) and I'm going to try a second one. Any issues with the second one and I'll give up and get a refund :-(
Problem persists for me on TF201-DOCK-0206 .
Although sometimes irratic and difficult to replicate, I've found a way that normally works.
When booted undocked, then docked after lock screen displayed, MobileDock works.
When booted docked, MobileDock still charges, but isn't fully functional.
I've installed all firmware updates so far. No change.
I also have the same problems with my TF201-DOCK-0206 as mentioned in this thread. Was hoping for the last update to solve it, but it didn't.
What I found out is when the keyboard works, keep the Caps Lock light burning if you don't use the keyboard.
I'm not sure if it is a soft or hard issue, but I don't think it has something to do with bad connections/connectors. More like a component goes into sleep mode and won't wake up the normal way.

[Q] Crash out of dock mode?

The issue is pretty simple, if I pull my Evo 3D from the dock sometimes it goes to the buttons lit and a black screen...will stay that way until I pull the battery. It never seems to happen if I close out dock mode before pulling it from the dock...only the desktop dock too btw, it's a Seidio. Phone is completely stock and updated. Thoughts?
While on the dock the buttons are always lit (if kept in dock mode)...that supposed to be?
Also should note, sometimes when it doesn't crash doing this, the middle portion of the touchscreen will not respond to certain things until I reboot, obviously clicking reboot works, but it's very odd, Swiftkey doesn't allow me to type on the virtual KB towards the center, etc.

Weird accelerometer problem(s)

The accelerometer on my Razr Maxx works promptly and perfectly except under two conditions. The first -- if I'm lying down, say on a couch or in bed, and holding the device over my head facing down. In this position the device will almost immediately shut off over and over. It won't reboot, just shut down. I can always restart it the same way I would from any "sleep". I can get the device to stay on merely by rotating it to face "up" no matter whether I change position or location or run or do not run any particular application. Is this common? Is it by design for some reason? The second -- if I have Button Savior installed, the Maxx accelerometer will work but there will be a significant delay in responding. Like 15-30 seconds delay! No Button Savior - no delay. Install Button Savior - delay. Uninstall Button Savior again - no delay. This troubles me as I really like Button Savior even on devices that have "hard" buttons. Having these controls right under my thumb is the fastest way to navigate, for me. Button Savior (updated) works perfectly for me on other Android phones, on my rooted Nook Color (CM7), even on my rooted Nook Touch. Any cures for either ill?
Hi
The accelerometer issue... does this happens from the first day you bought it? I trying searching similar issues, could not find anything. I am almost sure it is physical defect of some kind, you should probably take it back for replacement.
I don't know if the accelerometer issue related to Button Savior began when I first installed the app (as opposed to coming from a particular app update, for instance) as it took a long process of elimination to find the connection. As to the "upside down" issue I believe it has always done that. However -- it only does it if I TURN ON the device while it is upside down. If I start using it facing up, say watching a video, and then turn it upside down the video continues to play flawlessly. Bizarre!
I know there is an option to use the light sensor to detect when your phone is in your pocket, and turn off. Maybe it's on on your phone, and it's detecting lower light when you flip it over and shutting the screen off?
ok, so i misunderstood the issue, i thought the phone turns off completely...
if it only goes into "silent" or "lock" mode... maybe you installed some kind of app that does that when you flip? or maybe your player has one of those settings? like... say you are in a meeting, with your phone on the table, it rings... you just flip it and it goes silent.... some android build have that as a default setting already...
here, check this so u understand better what i mean :
http://www.appbrain.com/app/flip4silence/org.failedprojects.flip4silence
hope this helps!
tried updating yet? i had the same problems prior to the 65.1.40 update

Categories

Resources