Related
I can't turn on my X10.When i press the on button,it's only vibrate a bit then nothing happen.No light is on even when i plug in.More over,when i plug in the press the on button,it won't even vibrate like without cable.
Please help me
Have you tried to re-flash it with the 2.1 or 1.6 FW with Bin4ry's flasher?
Which device do you have? A generic one or developer phone?
i'm having the generic one and i just update it to 2.1 this monday.
It won't seem to have any power goes in when i plug in.How i'm going to reflash it anyway? please help me
shinnie88 said:
How i'm going to reflash it anyway? please help me
Click to expand...
Click to collapse
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
shinnie88 said:
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
Click to expand...
Click to collapse
Nice 1. It's totally up to you, I've stuck with the Nordic for now.
My phone went off again.This times also can't turn on or charge.But when i hit the on button,itz flash red 3x then went off.Anyone know what happen? please help me
X10 only vibrate
Same problem here X10 only vibrates,
i tried flashing bin4ry way it stops at around 75%
Tried even in sonyericsson update service but still no luck
It also stops around 25%, my phone is generic & my battery
Is fully charged any ideas?
Pls help
I have the same problem if I flash a firmware using FlashTool. I am stuck at 1.6 and I can't install any other firmware because I can't turn it on. Only firmware that works is the one from ROOT_F3V3 but it is a 1.6 firmware
If you find a firmware that works please post it.
Try downloading the latest Flashtool and then flash the latest firmware available; http://forum.xda-developers.com/showthread.php?t=936733
Its happened before. The phone will not boot, I waited several hours and ... it was working again, but I do not know why
Try to connect into flash mode and install SE original ?
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
1. Take your battery out.
2. Hold the back button. Make SEUS running and ready.
3. Plug it into the computer.
4. Put your bateery back in.
Follow the instructions. Hopefully it would work and good luck
If it worked dont forget to hit thanks button.
Sent from my X10i using XDA Premium App
ty so much JingleJo, your method worked for me
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Man plzz help me i'm a noob in this things i have the same problem with that guy but i dont know how to reflash my phone :S where can i take the 2.1 :S i dont know nothing :S:S
---------- Post added at 10:26 AM ---------- Previous post was at 10:20 AM ----------
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Plzz help me i have the same problem :S but i dont know how to reflash my x10 :S i dont know where can i take the 2.1 plzz can u tell me with a video or with steep :$ like baby plzz
My xperia arc went dead after trying to upload OTA update, yeah i know i shouldn't have but i guess it too late now. however i will like any help as to how to revive my phone. the charging light even don't turn up.
Pls anyone, I'm desperate
PS:the phone was unlocked
download the generic 2.1 firmware and save as in flashtool/firmwares.
Put yout phone in flashmode and flash back to 2.1....
Sent from my SO-01C using xda premium
Pc companion to 2.3 then do ur thing..like modding and stuff
Sent from my SO-01C using xda premium
Hey guys
So, i decided to try and root my phone and i think i cleverly chose to use a really old method and subsequently my phone is now pretty much bricked. It used to be software V2.1
now, whenever i turn it on (I need to take out the battery and put it back in to restart it) It goes to the sony ericsson splash screen, then a "MTT Docomo" screen and then the screen turns blank and stays like that. I got halfway through a guide i found somewhere on the internet and now this is happening D=
I can't repair it in the sony ericsson pc suite (it detects a phone but asks me to connect it etc. which i can't do).
I've read a bit around and i think the answer is using flashtools? Can i still do that when my phone's in this state? Sorry if this is a common question, couldn't find any similar cases though =S I'm not completely sure what to do... any suggestions?
Thanks!
yes, you're right, my opinion is you must have to flash your phone properly with a clean stock rom before retry to flashing your phone another time.
And to make it properly is to use flashtools method (see thit link : http://forum.xda-developers.com/showthread.php?t=928343, there is a perfect tuto made for that)
And you could also use the root function included in Flashtool if you still want to root your phone
You should still be able to repair w/SEUS ("pc suite") or use flashtool.
X10 is pretty unbrickable.
To get into flash mode in your phone's current state take out the battery, connect the usb, hold the back button, and then replace the battery.
Hope this helps.
Sent from my X10a using XDA App
Hey guys, thanks for the replies!
I went through the flashing guide above and managed to get my phone working again (you were right, i could still start it up in flash mode if i took out the battery etc. first), and rooting it was pretty easy =)
Thanks again guys, the forum's a great resource.
AyDee said:
You should still be able to repair w/SEUS ("pc suite") or use flashtool.
X10 is pretty unbrickable.
To get into flash mode in your phone's current state take out the battery, connect the usb, hold the back button, and then replace the battery.
Hope this helps.
Sent from my X10a using XDA App
Click to expand...
Click to collapse
you just saved my bacon mate. got an xperia play but decided to have a play about with unlocking the bootloader on my old x10. needless to say i cocked up and bricked the phone. followed your post and finally managed to get flashtool to sort it. many thanks
tom
Hey,
I'm afraid I managed to somehow brick my X10 (although I know you all say that's impossible). But here's the problem:
My phone is on the cyanogenmod 6.1 (gingerbread), and was working perfectly fine for over a few months. But two weeks ago he suddenly went off, and I can't restart him. I think the phone freezes the moment the boot loader should load android. Because when I press the ON button, the LED flashes green, and the phone vibrates (as it would normally do), but then nothing! And the phone doesn't respond to anything else I do then. The only thing I can do is take out the battery, put it back in, and were back in the beginning stage
I tried to repair with SEUS and PC Companion. When it asks to plug in flash mode (plug in while holding the back button), I do so, and the PC recognizes the phone. But when it tries to repair, I get an error after a while. The progress bar shows no process at all, so I think the error is a time out error, because the phone is frozen.
I don't know what to do any more know, and I'm not really looking foreword to buying a knew phone already! So I hope you guys can help me!
Freekh
Have you tried flashtool? Its worth a shot.
Sent from my X10i using XDA Premium App
Tried, but I don't seem to find an entire rom to flash. Most roms I find are .zip or .7z, and those files don't contain an .ftf file.
Do know were I could find one?
Im on my phone now so I cant post a link, but search for "flashtool firmwares" in the devs section. It will take you back to stock 2.1 (Or 2.3 depending on the firmware you get)
Sent from my X10i using XDA Premium App
Tried Flashtool, but no succes! It says "Error Flashing. Aborted". No luck with that! But thanks anyway!
There must be some other way I can repair my phone..
i have exactly the same problem with my x10i, it only vibrates continuously but won't boot,
i tried everything, flashing with generic firmwares 1.6, 2.1 and 2.3.3 and repair using PC companion and SEUS still nothing ( i make sure that i have 50% battery before flashing)
when flashing it enters flash mode without even pressing the back key, when hooked to charger green LED lit immediately as if (flash mode)
i taught it was the LCD but i tried to use another xperia x10i motherboard and the LCD works fine (i have 2 xperia x10i btw)
any help will be much appreciated.
use the search option on this forum!
Sent from my X10 using XDA Premium App
Hello All,
I have flashed X10a_3.0.1.G.0.75_AMERICA-US_GENERIC_1233-8200.ftf on my Xperia X10. And it all worked fine after that.
I have started removing system apps through Titanium backup tool. When it got rebooted after i removed 'gallery' app, it got stuck after showing SE logo at the this error screen showing triangle with exclamation on a phone.
I have tried to reflash the same FTF using Flashtool but phone is not even moving into the Flash Mode. So, i am stuck cant do anything. Don't have recovery also.
Could you please help what should i do. As you may have already guessed, i am very very new to all this.
Thanks for helping me.
In flashtool select the Rom you want to flash
Remove battery
Insert USB cable
When software asks you to press back, hold back while putting battery back in, should go straight to flash mode and flash
Sent from my Xperia X10 using xda premium
Thanks a lot wo88les. It worked this way .
PS: Sorry for putting this stupid question to such an elite forum
No problem at all click thanks button
Sent from my Xperia X10 using xda premium
ks_xperia said:
Thanks a lot wo88les. It worked this way .
PS: Sorry for putting this stupid question to such an elite forum
Click to expand...
Click to collapse
Just adding visual information that wo88les already said
Check this video how to put xperia x10 on flash mode
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
You said the button still lights up? can you get into recovery? if so just wipe system and install a rom! and try flashing a kernel with flashtool!!!!
RE: Blank Screen After Flashing Custom ROM
Thanx for getting back to me so fast. As I said, the screen is blank. That is, the backlit display works but I can see nothing else. The "Home" button lights up when i press it but the display does nothing. If/When I reboot to try to enter XRecovery, I see the SonyEricsson logo followed by the backlit screen & nothing else. The Volume up/down buttons work as I am able to silence the phone by turning volume all the way down to vibrate. Because I cannot see what's on the display, I cannot turn USB on/off to connect to PC to run SEUS/Flashtool, etc. I.E. I cannot fix the device. Usually I just boot into XRecovery to fix a problem like this but that doesn't work.
x10
hy, install sony update service and repair your phone, then install again custom rom, the indications how to repair your phone software is in the program.
Best regards
Does USB need to be On or Off on the device for Update Service to run?
daRican! said:
Does USB need to be On or Off on the device for Update Service to run?
Click to expand...
Click to collapse
Update says I already have the latest Update installed.
Flash 2.3 off line update
Sent from my Xperia X10 using xda premium
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
seem like u dont have a launcher...install launcher throuh flashtool
lilinbakar said:
seem like u dont have a launcher...install launcher throuh flashtool
Click to expand...
Click to collapse
I wish I had gotten this solution sooner. Not sure if it would have mattered. When trying to use Flashtool I kept getting an error saying my phone was not in "flash mode".
I solved my problem by flashing using Omnius & flashing firmware 'X10i_generic_SE_24_MultiTouch.rar'. This got my phone back but it was only 2.1 so I used 'DooMLoRD_v4_ROOT-zergRush-busybox-su' to get me back to 2.3, but this is where I'm at. I had Wolf's firmware before but right now I have no xRecovery installed. I thought I had rooted my phone but xRecovery isn't installed nor is Busybox.. Any ideas? Thanx in advance...EVERYONE @ XDA-DEVELOPERS rox!
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
daRican! said:
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
Click to expand...
Click to collapse
C if u can repair phone using SEUS now. Open the software without connecting phone. N then go to the update part. It should give u a repair option. Then follow those steps. Or else just connect ur phone n then start software. When it tells u ur phone is up to date click on that n then click on "repair". Then use the latest flashtool to root. Recoveries come with kernels so just flash a custom kernel.
Sent from my Xperia X10 using xda app-developers app
Many Thanks, I was finally able to use SEUS; before I could not. I used Flashtool to upgrade/downgrade kernel. However, I still don't have XRecovery installed & I'm not sure how to do this. I can't install XRecovery using Flashtool. Any help would be greatly appreciated. I would really like to install a custom Rom again.
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
I'm Back, Baby!
AdX9170 said:
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
daRican! said:
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
Click to expand...
Click to collapse
Ur welcome i don't think u need help you just flashed a custom ROM.. the procedure for installing ICS is the same. Although it'd be better if you are on stock before installing it.. just look for an ICS ROM that u like (I'm using feralab n it works like a charm).
Get the kernel n ROM.. as usual, put the ROM zip on ur SD card, flash the kernel, install ROM from recovery
Although before installing:
1. In recovery go to mounts n storage
2. Format system data n cache
3. Mount system, data n cache (note that if the mounting is successful the options should change to unmount system, unmount data, unmount cache respectively)
4. Then install ROM
5. The installer is GUI based so it'll guide u really well through the installation
Sent from my Xperia X10 using xda app-developers app
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
your LCD flexibel not improperly installed or detached, just open your x10 with screwdriver, and plug it in again your LCD flexible socket.
Iam sory if my english bad
Since I flashed my rom.My phone comes on but I can see anything, even when starting I can't see anything...
I really need help..
I will appreciate if you help me sort it out.