Related
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
x10i-user said:
I was reboot my phone and once he do this:
Screen out (duh) screen on with ''Sony Ericsson'' then he still stay
on that, idk dont know why.
I have reinsert my battery i have used the right and left button`s.....
So, if someone can help me with a other option, please help me...
Very Thanks alot!!!...
Click to expand...
Click to collapse
try using flashtool. directions are in the link.
U mentioned you have a x10i correct, then pick the firmware you want with the x10i with the latest baseband. if you still have questions, keep asking.
rooting is next if you go that route then, flashing ROMS, which are associated with a baseband
here is the link for flashtool: http://forum.xda-developers.com/showthread.php?t=920746
Yeah dude, use flashtool.... just flash it back... tht worked for me... i bricked my phone once.... now its rollin again....
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
im_iceman said:
how long did you leave it on the SE screen for?? sometimes mine takes a minute to boot through that?
Click to expand...
Click to collapse
ummmmh, more then 24 hours... :S
but i gonna try Flashtool right now, i hope i will work.
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
im_iceman said:
you could also just repair it using SEUS... depends if you want to root and install custom ROM's etc..
Click to expand...
Click to collapse
ok, i`ll try...
i can`t place my phone in Flashmode he gonna automatic to the Sony Ericsson logo...
What did i wrong?...
fire up SEUS, get to the bit where it say to connect your phone.
take the battery out for 10 seconds or so..
plug the micro USB cable into your phone only..
hold the back key (and keep it held until SEUS tells you to release it later in the process), push the battery back in
push the USB cable into your PC.
Should boot up into flash mode and SEUS will do it's thing!.
Done it before
Hi mate done it today since im new at rooting if you were trying to install a theme or rom, you might not have their firmware, if this is the case then you just from that Sony Ericsson screen keep pushing the Back or <-- key, this will boot you into xrecovery and just restore... if you havent made a back up, then you could try replace the rom you have back with the Se offical 2.1 rom which you can find in Android dev. and just launch it back with that... Hope this worked!!
hi guys. my x10 froze at se boot and does nothing. i've read through almost all helpfull threads that are similar to my problem but the problem still persist. fyi, i booted to xrecovery, made a backup and i noticed that there were problems in backing up (md5 chcksum, i think). but the backup file was created. i restored using that file and now it is stuck at boot. i can't even turn the phone off. i've tried hard reset, tried using the sues, flashtoo and even pc tools but to no avail. this is due to the phone can't connect to usb. can anyone please help me.
You have do a factory reset and wipe cache?
how can i do that andres3d? are there any way for me to do that? i'm trying but the phone just can't go past the se boot. it's just stuck there. i can't even turn the phone off. the only way is to take out the battery.
Try this, enter into xrecovery and select "factory resect" first at all, then reboot.
I got stuck there too, and I haven't the xRec installed
You can download the SE Update Service (SEUS) and flash the original rom back to it.
Download the software and install, take off the battery, wait a little bit (30s or so), insert the battery back. DO NOT TURN ON THE PHONE YET.
Open the SEUS, choose the phone (X10) and click 'go', or 'ok', or whatever. Keep going and the software will tell you to plug the phone. Plug the phone turned off. When it's plugged, turn it on holding the back button until the software tells you to release.
Wait a few moments... and it's done. Turn on your phone, it should take a little longer to boot, but it's just the first time, then it boots normally.
It's quite easy to do when you know what to do
thanks in advance but i've tried both method and it still got me nowhere. first, i can't boot to xrecovery at all and second, the sues doesn't even detect my phone.
Did you try download a stock firmware from here and install by flashtool?
Do you have installed drivers from x10 to your PC?
I thing the only way is by flashtool, because you don't have xrecovery access l.
http://forum.xda-developers.com/showthread.php?t=872298
Sent from my X10 using XDA App
rota2903 said:
thanks in advance but i've tried both method and it still got me nowhere. first, i can't boot to xrecovery at all and second, the sues doesn't even detect my phone.
Click to expand...
Click to collapse
Your phone must be charged ¬¬
Leave him charging at wall for about 45-60min and then try to do the step-by-step
tnx
tnx guys. i'll try the methods that u guys suggested. i really hope that i don't have to send the phone back to the shop.
OMG. it was actually my cable!!! that's why i can't flash my phone. now the phone is back to it's original state. anyways, i would like to thank all of you guys that have given me great advice. thanks again guys.
[Q] {HELP} another x10 stuck at se boot part 2
rota2903 said:
OMG. it was actually my cable!!! that's why i can't flash my phone. now the phone is back to it's original state. anyways, i would like to thank all of you guys that have given me great advice. thanks again guys.
Click to expand...
Click to collapse
Hi all
Unfortunetly my case is 99% similiar as "Sony Ericsson XPERIA X10XPERIA X10 Q&A[Q] {HELP} another x10 stuck at se boot" but changing the cables doesn't help. The only thing which the phone respond is to hold back starting of booting what immidietly happening when i'm connecting the usb cable.
I had xrecover installed before but is not starting onto flashing mode.
Any ideas
Hey,
I'm afraid I managed to somehow brick my X10 (although I know you all say that's impossible). But here's the problem:
My phone is on the cyanogenmod 6.1 (gingerbread), and was working perfectly fine for over a few months. But two weeks ago he suddenly went off, and I can't restart him. I think the phone freezes the moment the boot loader should load android. Because when I press the ON button, the LED flashes green, and the phone vibrates (as it would normally do), but then nothing! And the phone doesn't respond to anything else I do then. The only thing I can do is take out the battery, put it back in, and were back in the beginning stage
I tried to repair with SEUS and PC Companion. When it asks to plug in flash mode (plug in while holding the back button), I do so, and the PC recognizes the phone. But when it tries to repair, I get an error after a while. The progress bar shows no process at all, so I think the error is a time out error, because the phone is frozen.
I don't know what to do any more know, and I'm not really looking foreword to buying a knew phone already! So I hope you guys can help me!
Freekh
Have you tried flashtool? Its worth a shot.
Sent from my X10i using XDA Premium App
Tried, but I don't seem to find an entire rom to flash. Most roms I find are .zip or .7z, and those files don't contain an .ftf file.
Do know were I could find one?
Im on my phone now so I cant post a link, but search for "flashtool firmwares" in the devs section. It will take you back to stock 2.1 (Or 2.3 depending on the firmware you get)
Sent from my X10i using XDA Premium App
Tried Flashtool, but no succes! It says "Error Flashing. Aborted". No luck with that! But thanks anyway!
There must be some other way I can repair my phone..
i have exactly the same problem with my x10i, it only vibrates continuously but won't boot,
i tried everything, flashing with generic firmwares 1.6, 2.1 and 2.3.3 and repair using PC companion and SEUS still nothing ( i make sure that i have 50% battery before flashing)
when flashing it enters flash mode without even pressing the back key, when hooked to charger green LED lit immediately as if (flash mode)
i taught it was the LCD but i tried to use another xperia x10i motherboard and the LCD works fine (i have 2 xperia x10i btw)
any help will be much appreciated.
use the search option on this forum!
Sent from my X10 using XDA Premium App
Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
NetworkLabs said:
Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
Click to expand...
Click to collapse
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
stephenhiscock98 said:
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
Click to expand...
Click to collapse
No, because I charged it all night and tried to turn it on with no success. So that isn't the problem...
Flash 2.3 firmware then do root,recovery(just in case you don't have it) and a kernel.
Sent from my Desire HD using xda premium
Here is the firmware, thank the logic please.http://forum.xda-developers.com/showthread.php?t=1749426
Sent from my Desire HD using xda premium
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
NetworkLabs said:
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
Click to expand...
Click to collapse
No it wont if you flash stock 2.3 it will wotk!
sent from my x10 using xda premium
I had quite the similar issue with my x10i. One day it just decided to stop working completely. No lights no nothing, tried everything, just dead. So I contacted SE and they said they could do nothing if the software had been tampered with, no matter how much I assured them if was a hardware related fault.. So I went to my carrier and they sent me to a phone repairing company (Fonemenders here in Ireland), who try fix the phone themselves by getting parts in from the manufacturers. If they deem your phone irreparable they will get you a new replacement. This is exactly what happened me. So the other day I received an email saying that seeing as my x10 couldn't be fixed, I'd be receiving a Sony Arc as a replacement! So i'm happily waiting for the Arc to get here while I use my moms old x8.
So my best advice if nothing is working, go to your carrier and hopefully they can get you through to a phone repairing place, and I wish you as good luck as my own
Well, I cannot replace the Phone since I am not really using it as a Phone. It will not be activated, it's just to mess around with. And I really don't want to buy a Samsung Galaxy Player just so I don't have to deal with this. So I'm going to try the Stock ROM now and see if it works. Do I have to wait for boot up or something?
Try to flash with SE Companion. It will work.
Well, I restored using SEUS because it's the only one that recognized the phone, other than FlashTool. After it restored, it said Unplug the phone and wait for first time. It will take a while. So I am currently doing that. Hope it turns on!
Well, I've restored it and it still sits here. What's next?
I am going to try to flash it using s1tool and see if that helps. Also, can someone please respond with what they think is wrong?
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
NetworkLabs said:
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
Click to expand...
Click to collapse
Nooo to flash a stock firmware you don't need unlocked bootloader
sent from my x10 using xda premium
Well, it won't let it. It either doesn't recognize the device or it returns a error... =/
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Any additional help?
NetworkLabs said:
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Click to expand...
Click to collapse
I have a question for you... is the phone rooted ? If not then try following
1) start your PC companion and select update software
2) if software say, your phone is up to date then use here will be repair option you need to select it.
3) once you select repair it will download stock GB 2.3.3 and after download it will ask you to plug you phone in flash mode
4) remove phones battery and connect the phone to your laptop.
5) now place the battery back while holding down the back button (3rd button from left) { this step is important as this will get your phone into flash mode.
6) above steps should get your phone back onto stock unrooted ROM...
if you want then use flash tool to root it again but be careful with kernels and bootloader
Set from my Transforer TF101 using xda app-developers app
Well, I think I have tried that and it still won't boot. But I will try again. (PS - Sorry for this old thread, but I just needed a break on working on it! I am going to try again and see if it works!)
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
You said the button still lights up? can you get into recovery? if so just wipe system and install a rom! and try flashing a kernel with flashtool!!!!
RE: Blank Screen After Flashing Custom ROM
Thanx for getting back to me so fast. As I said, the screen is blank. That is, the backlit display works but I can see nothing else. The "Home" button lights up when i press it but the display does nothing. If/When I reboot to try to enter XRecovery, I see the SonyEricsson logo followed by the backlit screen & nothing else. The Volume up/down buttons work as I am able to silence the phone by turning volume all the way down to vibrate. Because I cannot see what's on the display, I cannot turn USB on/off to connect to PC to run SEUS/Flashtool, etc. I.E. I cannot fix the device. Usually I just boot into XRecovery to fix a problem like this but that doesn't work.
x10
hy, install sony update service and repair your phone, then install again custom rom, the indications how to repair your phone software is in the program.
Best regards
Does USB need to be On or Off on the device for Update Service to run?
daRican! said:
Does USB need to be On or Off on the device for Update Service to run?
Click to expand...
Click to collapse
Update says I already have the latest Update installed.
Flash 2.3 off line update
Sent from my Xperia X10 using xda premium
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
seem like u dont have a launcher...install launcher throuh flashtool
lilinbakar said:
seem like u dont have a launcher...install launcher throuh flashtool
Click to expand...
Click to collapse
I wish I had gotten this solution sooner. Not sure if it would have mattered. When trying to use Flashtool I kept getting an error saying my phone was not in "flash mode".
I solved my problem by flashing using Omnius & flashing firmware 'X10i_generic_SE_24_MultiTouch.rar'. This got my phone back but it was only 2.1 so I used 'DooMLoRD_v4_ROOT-zergRush-busybox-su' to get me back to 2.3, but this is where I'm at. I had Wolf's firmware before but right now I have no xRecovery installed. I thought I had rooted my phone but xRecovery isn't installed nor is Busybox.. Any ideas? Thanx in advance...EVERYONE @ XDA-DEVELOPERS rox!
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
daRican! said:
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
Click to expand...
Click to collapse
C if u can repair phone using SEUS now. Open the software without connecting phone. N then go to the update part. It should give u a repair option. Then follow those steps. Or else just connect ur phone n then start software. When it tells u ur phone is up to date click on that n then click on "repair". Then use the latest flashtool to root. Recoveries come with kernels so just flash a custom kernel.
Sent from my Xperia X10 using xda app-developers app
Many Thanks, I was finally able to use SEUS; before I could not. I used Flashtool to upgrade/downgrade kernel. However, I still don't have XRecovery installed & I'm not sure how to do this. I can't install XRecovery using Flashtool. Any help would be greatly appreciated. I would really like to install a custom Rom again.
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
I'm Back, Baby!
AdX9170 said:
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
daRican! said:
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
Click to expand...
Click to collapse
Ur welcome i don't think u need help you just flashed a custom ROM.. the procedure for installing ICS is the same. Although it'd be better if you are on stock before installing it.. just look for an ICS ROM that u like (I'm using feralab n it works like a charm).
Get the kernel n ROM.. as usual, put the ROM zip on ur SD card, flash the kernel, install ROM from recovery
Although before installing:
1. In recovery go to mounts n storage
2. Format system data n cache
3. Mount system, data n cache (note that if the mounting is successful the options should change to unmount system, unmount data, unmount cache respectively)
4. Then install ROM
5. The installer is GUI based so it'll guide u really well through the installation
Sent from my Xperia X10 using xda app-developers app
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
your LCD flexibel not improperly installed or detached, just open your x10 with screwdriver, and plug it in again your LCD flexible socket.
Iam sory if my english bad
Since I flashed my rom.My phone comes on but I can see anything, even when starting I can't see anything...
I really need help..
I will appreciate if you help me sort it out.