Trying to root a Fascinate, and it showed up in ODIN once, then the flash failed. Now it's in download mode and not showing up in ODIN, any ideas?
Oxirane said:
Trying to root a Fascinate, and it showed up in ODIN once, then the flash failed. Now it's in download mode and not showing up in ODIN, any ideas?
Click to expand...
Click to collapse
Do you have the correct Samsung drivers downloaded AND installed. After you download the drivers package you need to double click on the file to complete the installation process. Is the battery out the whole time? Are you using USB ports in the back of your computer closest to the motherboard? Are you using the USB cord that came with your phone? Were you holding the down volume button until your phone went into download mode and the yellow rectangle appeared in ODIN? See if any of those help and if not we'll go from there.
Follow this thread its about the most comprehensive step-by-step Odin/heimdall guide I've seen
Unplug the phone, close odin, re open odin, hold volume button down, plug cable in...it should see it then
Sent from my Froyo'd Fascinate via Tapatalk
cpark_12 said:
Unplug the phone, close odin, re open odin, hold volume button down, plug cable in...it should see it then
Sent from my Froyo'd Fascinate via Tapatalk
Click to expand...
Click to collapse
I agree. I have had to do this many times.
Related
Ok heres the deal, I tried a bunch of custom roms eventually leading to hybridv3 then I tried flashing with the Stock vibrant rom and that didnt work so I went to Vibrant4, then stupidly renamed the Stock vibrant rom to update.zip and used android recovery to update packages. Now my phone goes through the boot up but I just get a black screen. Is there any hope for me?
Your Fired! Lol..jk
I would use odin to reload the stock firmware.
I can't seem to get my Vibrant to show up on a com port, I have the pit and the tar files but my vibrant wont show up in odin.
jmercil said:
Your Fired! Lol..jk
Click to expand...
Click to collapse
I did something similar a while back. You may need to flask the stock rom via odin. The link to the thread for it is in the bible sticky in this section. Set up odin before you connect the phone to the computer. Also if you use windows vista or 7 you need to open odin by right clicking and run as administrator. For it to work you need to get the phone to download mode. Pull the battery, put it back in. dont touch the power button. Hold the up and down volume buttons and plug the usb into the phone when the other end is already plugged into the computer. It should be in dl mode. Good luck
Sent from my SGH-T959 using XDA App
trying now...
Odin is doing it's thing right now, Thank you so much!!
Just to recap since the correct information has never been added to an OP:
You must install ODIN and the correct USB drivers from http://forum.xda-developers.com/showthread.php?p=7657252#post7657252 .
Get the phone into download mode. Several different instructions have been posted meaning either different versions of the same phone get into DLM different ways or everyone else is posting the wrong instructions.
What works on mine: Have phone off, ODIN open, and correct USB drivers already installed. HOLD vol up+vol down and plug in the USB, and do not touch the power button.
Hello guys. My phone don't turn on when i press power button, VOL UP/DOWN buttons don't work also.
1. I flashed my vibrant with Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10*. Don't know why after what i can't access download mode by 3 buttons. I had Android System Recovery <3e>.
2. After that i try go to download mode with battery out method, and it was fine. Next step was downgrade firmware to T959UVJE8-factory-final-MS_Guru.
3. After that i had "Android System Recovery <2e>" message
4. I tried to reinstall back Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10* but something happend and Odin software Failed and i had "picture phone ! pc".
5. I tried both methods to go to download mode and after half an hour method with battery out and pushing vol up/down buttons accepted.
6. Then i tried to reinstall original firmware one more time. And it was fine. You can see screenshot in attachment.
7. But my phone after flashing turns off for rebooting and died.
When i trying to connect it with pc or charger nothing happens. Buttons don't work. Nothing on screen. Battery out not helped.
What to do??????
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
mbrockway said:
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
Click to expand...
Click to collapse
I think mbrock meant pit, not sit.
And yes, you only need the .pit and the .tar files.
~SB
mbrockway said:
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
Click to expand...
Click to collapse
Yes i tried this method. It doesn't work for me. I done all steps exactly how wrote MS_Guru in "Reflash Your Vibrant To Original Firmware"
bafxyz said:
Yes i try this method. It doesn't work for me. I do all steps exactly how wrote MS_Guru in "Reflash Your Vibrant To Original Firmware"
Click to expand...
Click to collapse
have you tried eugene's froyo that doesn't brick then go back to stock?
when going back to stock you only use the pda and the pit. that seems to be you problem.
Sent from my SGH-T959 using XDA App
iynfynity said:
have you tried eugene's froyo that doesn't brick then go back to stock?
when going back to stock you only use the pda and the pit. that seems to be you problem.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I used this one:
Eugene_SD+2E_JK2_Froyo Download >Vibrant_Full_Froydin_AND_2E_Recovery_+SD_Fixed
Unzip Download
&
Load s1_odin_20100512.pit into .pit at top of ODIN
&
Load Eugene_2E_JK2_Froyo.tar.md5 into PDA of ODIN
P.S. Tommorow i'll try to modify USB cable with resistors. Hope this will help me.
bafxyz said:
Hello guys. My phone don't turn on when i press power button, VOL UP/DOWN buttons don't work also.
1. I flashed my vibrant with Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10*. Don't know why after what i can't access download mode by 3 buttons. I had Android System Recovery <3e>.
2. After that i try go to download mode with battery out method, and it was fine. Next step was downgrade firmware to T959UVJE8-factory-final-MS_Guru.
3. After that i had "Android System Recovery <2e>" message
4. I tried to reinstall back Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10* but something happend and Odin software Failed and i had "picture phone ! pc".
5. I tried both methods to go to download mode and after half an hour method with battery out and pushing vol up/down buttons accepted.
6. Then i tried to reinstall original firmware one more time. And it was fine. You can see screenshot in attachment.
7. But my phone after flashing turns off for rebooting and died.
When i trying to connect it with pc or charger nothing happens. Buttons don't work. Nothing on screen. Battery out not helped.
What to do??????
Click to expand...
Click to collapse
was your battery low when your flashing ?
djkdawg said:
was your battery low when your flashing ?
Click to expand...
Click to collapse
It was almost full.
Trying cable method with resistors. Not working
I've got exactly the same problem
After trying to flash my phone with odin it went black and that's it, nothing can wait it up (
Email me [email protected]
The best phone in the world
Maybe this info will be helpfull. In this situation with dead Samsung Galaxy, Vibrant, Captivate only one ressurection. You need to open your mobile phone and reflash boot loader using RIFF Box JTAG which you can find only in service center. And you need to save your IMEI information which you must read from this address 0х80000 and this lenth 0хA80000. Thats all.
i tried that method you decscribed , now my phone is in MOde that say "power reset or unknown upload mode" any clue about how to get into download mode from this. odib detects my phone in this mode but i don't think it will load the software since it is not in download mode.
So I was using Odin to flash the stock ROM so I could flash to Nero v3...Had some trouble with Odin now this icon is all I can get the phone to show me. Attempts to get back into download mode haven't worked. I've done the Volume up + Volume - and Power button.
Did I brick my phone?
Did you have voodoo enabled when you flashed?
Unplug phone. Open odin. remove battery. Plug phone in. hold volume up/down keys. plug battery back in. should auto boot into download mode. I've seen that screen a few times and managed to go back to stock make sure its 512 pit jfd rom. Not ji6 513.
Sent from my SGH-T959 using XDA App
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
same issue somewhat....,.
Having trouble using ODIN!!
as now I did the steps and all I have is the phone will boot up through the tmobile screen & S after that screen goes black with the 4 hour button home row lit up.???
As for the recovery I get the following when booting it:
move_check Start..!!
checksum confirmation need_checksum(1300........)
mbr_checksum in header : 4:1
mbr checksum: 533a4003d.........
mbr checksum error
movingand checksum cofirmattion fail
movi_checking done!
update media, please
update media, finished
#manual mode #
appling muti csc
installin multi csc
Much help would be appreciated!!! Have to work all day today which will be slow, so I can work on fixing this. My main question is what type of file is pit & tar? Pit properties is coming up as a window shell comand, Tar opens with unknow app? Not sure if this is my problem or not, I get ODIN to run and complete the steps and end up with the above.
Using Odin V1.3
512.pit
t959UVJI6
bnielsen40 said:
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
Click to expand...
Click to collapse
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
raziel26 said:
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
Click to expand...
Click to collapse
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
icandy75 said:
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
Click to expand...
Click to collapse
thats the problem i cannot get into downloader mode
Have you tried the batt pull method? You could also try adb reboot download. If these do not work for you your will need a Jig to get her back to life.
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
raziel26 said:
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
Click to expand...
Click to collapse
Just pull the batt out. Plug usb to phone only first, hold down volume + and - and don't let go then plus in usb to your computer while still holding volume keys and put battery back in. That should work for you. A Jig is a rigged hardware piece that forces your phone to Dl mode.
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Sweet! that totally got me back into download mode...next question why am i getting stuck at file analysis?
bnielsen40, Boystuff, and Osuhsxr are totally right about the vol keys no crazy special soldering required.
osugsxr said:
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Click to expand...
Click to collapse
Check your PM.
Ok, So i'm having a heaping pile of rooting problems. Brand new phone. Installed and updated Kies on my computer.
First problem: can't enter download mode without having usb plugged in. Volume down+power and volume up+ power just turns the phone on again. volume up+ volume down+ power enters 3e recovery. If I hold both volume buttons and plug the usb in, then it goes to the "press volume up to enter download mode" screen and that's the only way i can do it.
Second Problem: perhaps due to the fact that i have to plug in my usb in order to get to usb mode, superone click and odin don't recognize my phone. When i open those programs it doesn't show "[0:COM8]" (or something similar) like it should.
Third Problem: many methods for rooting I have found want me to use Odin 1.x (usually odin3 v1.85) I have windows 7 prompt me for permission to use that program. Then, I get a small dialogue box that says "Odin3" followed by several characters in what appears to be japanese. The only option on that box is "ok" and when you press that the box goes away and odin never opens...
I have not found a root method that doesn't run headlong into one or more of those issues. Any help would be great, I have no idea why this is so difficult.
justlaxin13 said:
Ok, So i'm having a heaping pile of rooting problems. Brand new phone. Installed and updated Kies on my computer.
First problem: can't enter download mode without having usb plugged in. Volume down+power and volume up+ power just turns the phone on again. volume up+ volume down+ power enters 3e recovery. If I hold both volume buttons and plug the usb in, then it goes to the "press volume up to enter download mode" screen and that's the only way i can do it.
Second Problem: perhaps due to the fact that i have to plug in my usb in order to get to usb mode, superone click and odin don't recognize my phone. When i open those programs it doesn't show "[0:COM8]" (or something similar) like it should.
Third Problem: many methods for rooting I have found want me to use Odin 1.x (usually odin3 v1.85) I have windows 7 prompt me for permission to use that program. Then, I get a small dialogue box that says "Odin3" followed by several characters in what appears to be japanese. The only option on that box is "ok" and when you press that the box goes away and odin never opens...
I have not found a root method that doesn't run headlong into one or more of those issues. Any help would be great, I have no idea why this is so difficult.
Click to expand...
Click to collapse
for one. you have to plug usb in to get into download mode.
for two. you have to hold volume up and volume down, then plug the usb in to get into download mode.
exactly, but then my phone isn't recognized in odin or anything else for that matter. And i have seen numerous instructions for this phone that tell you to enter download mode with Volume down+ power alone...
justlaxin13 said:
Ok, So i'm having a heaping pile of rooting problems. Brand new phone. Installed and updated Kies on my computer.
Click to expand...
Click to collapse
That should take care of the driver issue, but it's still possible (an outside chance) you will have to uninstall and reinstall the usb driver.
First problem: can't enter download mode without having usb plugged in. Volume down+power and volume up+ power just turns the phone on again. volume up+ volume down+ power enters 3e recovery. If I hold both volume buttons and plug the usb in, then it goes to the "press volume up to enter download mode" screen and that's the only way i can do it.
Click to expand...
Click to collapse
You are trying to use the I9100 key combinations. The one that works for you is the only one that works on the I777.
Second Problem: perhaps due to the fact that i have to plug in my usb in order to get to usb mode, superone click and odin don't recognize my phone. When i open those programs it doesn't show "[0:COM8]" (or something similar) like it should.
Click to expand...
Click to collapse
Could be a driver problem or is could be a faulty connection of your usb port or cable. Try a different usb port, try a different cable.
Third Problem: many methods for rooting I have found want me to use Odin 1.x (usually odin3 v1.85) I have windows 7 prompt me for permission to use that program. Then, I get a small dialogue box that says "Odin3" followed by several characters in what appears to be japanese. The only option on that box is "ok" and when you press that the box goes away and odin never opens...
Click to expand...
Click to collapse
Odin3 v1.85 work fine on Windows 7. But you don't need Odin3 v1.85 if you are using the One-click Downloader executable, which is also an Odin. If you want to use Odin3 v1.85, delete the one you have and redownload it.
I have not found a root method that doesn't run headlong into one or more of those issues. Any help would be great, I have no idea why this is so difficult.
Click to expand...
Click to collapse
Once you get Odin to recognize your phone, you will be fine.
justlaxin13 said:
exactly, but then my phone isn't recognized in odin or anything else for that matter. And i have seen numerous instructions for this phone that tell you to enter download mode with Volume down+ power alone...
Click to expand...
Click to collapse
Not familiar with it, but those may be for I9100. Download mode on I777 is, as previously mentioned, hold both volume buttons, not power, while powered off, and then plug in. If your device isn't recognized in odin, try going to the samsung site and download the newest drivers there
Edit: ninja'd
Sent from my SGH-I777 using XDA App
Holding power to enter download mode is not valid for I9100 either.
justlaxin13 said:
exactly, but then my phone isn't recognized in odin or anything else for that matter. And i have seen numerous instructions for this phone that tell you to enter download mode with Volume down+ power alone...
Click to expand...
Click to collapse
those numerous instructions are wrong then dude. i just told you how to get into download mode for the i777. do you have an i777, or an i9100???
Watch
http://youtu.be/9YMtkkRpgEY
I have an I777 for sure. so not my problem boils down to odin not recognizing my phone when in download mode. Or, when i try to use DooMLorD V3 root... i have seen that highly recommended but it doesn't recognize that my device either.
You need to update your driver. get it from the Samsung site
Sent from my SAMSUNG-SGH-I777 using Tapatalk
That's what I'm working on, but even that can't be easy. The .exe file to update the drivers has a problem opening and windows shuts it down...ugh.
Are you opening Odin with your phone already plugged in on dl mode... Mine never works unless I open Odin first then plug my phone in...
Sent from my SGH-I777 using xda premium
^this. Odin must be open first then go into download mode on the phone. Doing it another order, Odin won't always recognize your device
Sent from my SGH-I777 using XDA App
Rob_Wing said:
Are you opening Odin with your phone already plugged in on dl mode... Mine never works unless I open Odin first then plug my phone in...
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
+1. Have Odin already open before you even start putting your phone in download mode.
Or try another computer. You could always just use Odin 1.85 and flash a kernel tar file, such as entropy or siyah.
Hey guys, I really need help with my situation. I've been looking all over the forums for 2days straight trying to find solutions to my problem. I have a galaxy s2 i777 and I had the sho-stock3 rom. Then I decided that I wanted to back up my rom, so I used rom manager to do it. that's when the problem started. when the phone tried restarting it was stuck where it says "galaxy s2" with the yellow triangle. I put it into download mode and tried to flash siyah kernel..it worked..but when I tried to reboot my phones says "firmware upgrade encountered an issue, please select recovery mode in kies and try again. of course kies wont let the phone connect. and yes all the drives are installed for my phone. now i'm just stuck trying to flash stock firmwares for the phone and the stock rom but it always fails in odin. please help me!!!!!
Hours76 said:
Hey guys, I really need help with my situation. I've been looking all over the forums for 2days straight trying to find solutions to my problem. I have a galaxy s2 i777 and I had the sho-stock3 rom. Then I decided that I wanted to back up my rom, so I used rom manager to do it. that's when the problem started. when the phone tried restarting it was stuck where it says "galaxy s2" with the yellow triangle. I put it into download mode and tried to flash siyah kernel..it worked..but when I tried to reboot my phones says "firmware upgrade encountered an issue, please select recovery mode in kies and try again. of course kies wont let the phone connect. and yes all the drives are installed for my phone. now i'm just stuck trying to flash stock firmwares for the phone and the stock rom but it always fails in odin. please help me!!!!!
Click to expand...
Click to collapse
Don't use rom manager again
Sent from my SGH-I777 using Tapatalk 4 Beta
Can you get in either cwm recovery or download mode?
Sent from my SGH-I777 using xda app-developers app
Teknodad1974 said:
Can you get in either cwm recovery or download mode?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
yes i can get into download mode only by holding down on vol and plugging in the usb...no i cant get into cwm recovery
Try this page...
http://forum.xda-developers.com/showthread.php?t=1511906
Sent from my SGH-I777 using xda app-developers app
Teknodad1974 said:
Try this page...
http://forum.xda-developers.com/showthread.php?t=1511906
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
thank you, my phone is back again!!
Sweet enjoy your phone buddy!
Sent from my SGH-I777 using xda app-developers app
Hours76 said:
yes i can get into download mode only by holding down on vol and plugging in the usb...no i cant get into cwm recovery
Click to expand...
Click to collapse
this SAVED me...I couldn't get it into download mode for the life of me and that worked. I now have the correct i777 JB file (I accidentally flashed the wrong version). back in the game!
Help
sbello81 said:
this SAVED me...I couldn't get it into download mode for the life of me and that worked. I now have the correct i777 JB file (I accidentally flashed the wrong version). back in the game!
Click to expand...
Click to collapse
Hello
My friend just gave me I777 with this problem cause he bought a new phone, he couldn't tell me exactly when he got that "connect to kies". I never flashed anything or installed any rom's, I just want to get it back to life. Any solutions for me?
Fratula said:
Hello
My friend just gave me I777 with this problem cause he bought a new phone, he couldn't tell me exactly when he got that "connect to kies". I never flashed anything or installed any rom's, I just want to get it back to life. Any solutions for me?
Click to expand...
Click to collapse
Can you put the phone into download mode? I would assume the answer is yes if you still get the "connect to kies" message. Following are detailed instructions for getting into download mode.
Download Mode:
There are several ways to put the phone into download mode. You should try all of them that you can before you give up.
Recovery mode:
With the phone off (and not connected to the computer), and battery installed, hold all three buttons, vol- vol+ pwr continuously until the initial boot screen appears the second time.
Download mode:
1. With the phone off and connected to the computer via USB cable, and battery installed, hold all three buttons, vol- vol+ pwr.
2. With the phone off and battery installed, hold vol- and vol+ (but not pwr) while plugging in the USB cable.
3. With the phone off and battery installed, hold vol- (but not vol+ or pwr) while plugging in the USB cable.
4. Attempt each of the above three options with the battery removed from the phone. The computer will supply the power to the phone.
5. Use Android Debug Bridge (adb) which will only work if USB debugging has been already turned on in Developer Options, since you can't boot into the system to turn it on. With the battery installed and the phone connected to the pc via USB cable, use the command "adb reboot download".
6. Use a USB jig. With the battery installed insert the USB jig into the USB connector of the phone. Some have reported that this method works when no other method would work.
If the phone will go into download mode, you will need to use Odin desktop to flash the stock firmware. You should use the latest stock firmware. Go to the Download Repository and download Odin3 v1.85 from the link near the top of the page, and also download the latest stock firmware, "I777UCMD8 Stock Binaries (Android 4.1.2 Jelly Bean)" from near the bottom of the page. It's the next to last item. Download both to your Windows pc, and then follow the detailed instructions below to flash it onto your phone.
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) Have the USB cable plugged into USB port on the computer, but *Not* plugged in to the phone.
3.) Shut the phone off.
4.) While holding down the vol+ & vol- keys, plug micro-usb plug into phone.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) When complete, you will get a PASS (or FAIL if unsuccessful).
The phone should boot up normally. If it does not, enter recovery (see instructions in the download mode section) and perform a wipe data/factory reset.