So I was using Odin to flash the stock ROM so I could flash to Nero v3...Had some trouble with Odin now this icon is all I can get the phone to show me. Attempts to get back into download mode haven't worked. I've done the Volume up + Volume - and Power button.
Did I brick my phone?
Did you have voodoo enabled when you flashed?
Unplug phone. Open odin. remove battery. Plug phone in. hold volume up/down keys. plug battery back in. should auto boot into download mode. I've seen that screen a few times and managed to go back to stock make sure its 512 pit jfd rom. Not ji6 513.
Sent from my SGH-T959 using XDA App
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
same issue somewhat....,.
Having trouble using ODIN!!
as now I did the steps and all I have is the phone will boot up through the tmobile screen & S after that screen goes black with the 4 hour button home row lit up.???
As for the recovery I get the following when booting it:
move_check Start..!!
checksum confirmation need_checksum(1300........)
mbr_checksum in header : 4:1
mbr checksum: 533a4003d.........
mbr checksum error
movingand checksum cofirmattion fail
movi_checking done!
update media, please
update media, finished
#manual mode #
appling muti csc
installin multi csc
Much help would be appreciated!!! Have to work all day today which will be slow, so I can work on fixing this. My main question is what type of file is pit & tar? Pit properties is coming up as a window shell comand, Tar opens with unknow app? Not sure if this is my problem or not, I get ODIN to run and complete the steps and end up with the above.
Using Odin V1.3
512.pit
t959UVJI6
bnielsen40 said:
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
Click to expand...
Click to collapse
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
raziel26 said:
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
Click to expand...
Click to collapse
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
icandy75 said:
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
Click to expand...
Click to collapse
thats the problem i cannot get into downloader mode
Have you tried the batt pull method? You could also try adb reboot download. If these do not work for you your will need a Jig to get her back to life.
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
raziel26 said:
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
Click to expand...
Click to collapse
Just pull the batt out. Plug usb to phone only first, hold down volume + and - and don't let go then plus in usb to your computer while still holding volume keys and put battery back in. That should work for you. A Jig is a rigged hardware piece that forces your phone to Dl mode.
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Sweet! that totally got me back into download mode...next question why am i getting stuck at file analysis?
bnielsen40, Boystuff, and Osuhsxr are totally right about the vol keys no crazy special soldering required.
osugsxr said:
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Click to expand...
Click to collapse
Check your PM.
Related
I googled how to reset my phone back to factory settings and they gave me this link
"[STOCK ROM] Odin3 One-Click Downloader"
(cant link links)
i misread that it was for the captivate, and i went through with all the directions.
now my phone keeps flashing an AT&T bootscreen and i cant get it in recovery mode..
help?
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
nevermind, i found the Odin program for the samsung vibrant and re did it.. but i still have BOTH at&t boot screen at the tmobile vibrant boot screen.. anyone know how to get rid of that? it would be much appreciated thanks!
http://forum.xda-developers.com/showthread.php?t=741027
where did u find it.. please share..
Edit: NVM..
stepinmyworld said:
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
Click to expand...
Click to collapse
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Does not boot!
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
setzer715 said:
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Click to expand...
Click to collapse
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
stepinmyworld said:
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
Click to expand...
Click to collapse
I don't want your money, but if you PM me I will try to type up a detailed how to.
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Ok,
The_Chrome_Coyote really helped me!!!! Thank you so much and im back up and running. There was something missing from the original tutorial, not that we should be spoon fed but I didn't have the WinRAR program on my pc and didn't know I needed to extract anything. I was looking for exe. for it to be a program and just open it. It's a little more complicated than that. I added my additions in BOLD
The_Chrome_Coyote's Original post to me:
Odin isnt that hard, its just REALLY picky about working.
Firstly you need to download the Samsung drivers for your OS which can be found:
http://forum.xda-developers.com/showthread.php?t=728929
added:
Second you need to make sure you download WinRAR x86 (32 bit) 3.93 (google it and you should be able to get it) otherwise if your pc doesn't have a program to recognize rar and tar files, you are out of luck.
then read this thread from JAC:
http://forum.xda-developers.com/showthread.php?t=734475
1. Now, Extract ODIN from its .rar and place the .exe on your desktop
2. Extract the .pit file from its.rar and place that on your desktop
3. Place the JFD .tar file on your desktop but DO NOT EXTRACT
Now you can use ODIN
4. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file
5. Hit "PDA" button, and through ODIN select the .tar file
6. Plug your TURNED OFF PHONE into the USB cable
7. Wait for the Battery/ charging indicator to start
8. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
9. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasnt, unplug and plug your phone back in.
10. Dont select any options other than whats set at default.
11. Hit Start and be patient, takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute;
11a. Turn your phone off by pulling the battery.
11b. CLOSE ODIN
11c. Start at step 4 again.
ODIN needs to be open and ready to flash before the phone is plugged in, in my experience. Its very picking about this, and not everyone has this issue, but I did and following all these steps helped me flash my phone more times than I can count the other day haha.
Hope this helped! and your $20, donate it to Wes, JAC, or Eugene to keep them making great stuff for our phone.
Reply With Quote
Thank you thank you thank you
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
Same thing happened to mine when i tried odin. Now all i get sometime when it come on. are 7 rows of text that seems to be a code on screen in amber. Ishipped back 2 samsung. Since t-mobile won't take it after 14 days.
ok I screwed up guys.
I installed ROM manager from the market, flashed clockwork, it asked me if I wanted to partition and I said yes.
Now I just get a black screen at boot. I've managed to run odin and it says success. But I still just get a black screen after boot.
Little help?
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
daddysays said:
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
First: everyone was a noob at one time, so simmer down.
Second: Pleast post an update.zip that will make my phone work.
Cannot get past Galaxy S boot screen
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
jmoney1017 said:
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
Click to expand...
Click to collapse
If you can see the samsung logo you are fine. Load up recovery and try a full wipe first. If that fails then you can odin back to stock and root again.
Sent from my SGH-T959 using XDA App
1. If you have questions, there is a q and a forum for this device!!!!!!
2. THIS IS THE DEV PART OF THE FORUM. IE FOR DEVS POSTING STUFF FOR THE PHONE!!!!!
3. Learn how to Google. Not that hard. Example, you don't know what the *.rar extension is. GOOGLE IT!! Google knows everything.
4. If you don't have basic android or computer skills, don't try anything stupid. You do have a chance to brick your phone, even the pros like cyanogen have bricked their phones.
5. Don't offer cash for someone to fix your phone. Keep it in qna and some one will help you. Save your cash for the development that work hard on making these things work.
6. Can a mod please move this thread to qna.
7. THE MOST IMPORTANT THING. USE THE SEARCH FINCTION BUILT ONTO THE FORUMS. IT WILL SAVE YOU TIME AND THEN YOU WILL NOT LOOK LIKE NOOBS THAT JUST GOT THIS PHONE BECAUSE IT HAD AVITAR IN THE BOX!!!!!
Sent from my SGH-T959 using XDA App
cache.fs problem in odin
setzer715 said:
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
First off i'd like to say im not new to android, im not a dev or anything but i know how to work myself around my phone. But unfortunately i think think i might have possibly semi-bricked my phone. After installing frankin twiz final rom with JAC kernel w/voodoo, i was then informed that the official JI6 update was released. After i disabled the voodoo lag fix I tried odining back to stock vibrant so i can hopefully get the OTA update. It appeared to have flashed correctly. But once i booted up my phone it booted through the samsung vibrant screen then the galaxy screen, then just stayed there for awhile and turned black. I have tried to enter download mode but i believe i have a hardware locked phone(i've tried over and over again but with no avail) so i don't think i can odin flash again. So i have no clue what to do anymore. Please help. thanks.
Can you get into recovery by holding down the +/- buttons and power button? If you can, you can boot into Clockwork recovery and use ADB to see if mount /data works and what file system is formatted.
Also if you can use the buttons to boot into recovery these are the steps you should follow to get into download mode and have ODIN recognize your phone properly.
1.) Unplug your phone from the usb cable
2.) Remove your battery, sdcard, and sim card
3.) Open ODIN
4.) Plug in your usb cable to the phone and computer
5.) Hold down the volume +/- buttons
6.) While still holding the volume buttons insert the battery.
7.) The phone should now be in download mode with the big yellow icon
8.) Odin should recognize that your phone has been connected
9.) Flash the JFD firmware following the instruction in JAC's JFD thread
Thanks silow for the reply, but i've tried that and it failed. Even before i bricked the phone i couldn't access the recovery nor download mode by the hardware button i had to either enter through ROM manager or through terminal. Any other suggestions? thanks again.
If you can't get into recovery using the hardware buttons you should return and exchange your phone because that is consider a defect.
Being unable to get into recovery or download mode when you have a "soft-brick" is dangerous business.
Sent from my SGH-T959 using XDA App
Hello,
Alright, so I tried flashing to the newest firmware and I ticked re-partition in odin (yea stupid me)... Now, I get the following
Code:
-- Movi_check Start..!!
checksum configuration need_checksum[0]
Not need checksum configuration
-- Movi_check already executed!!...
--movi_checking done!...
update media, please wait...
E:Cant mout /dev/block/st110
(invalid argument)
E:copy_dbdata_media:cant mount DBDATA:
copy default media content failed.
Now, I used adb to get into download mode, but now when I used adb reboot download, it sends me to recovery and i get this message...Is there anything i can do to at least get back to stock? Please Help D':
EDIT:
Would it be possible to somehow push the clockwork recovery to the sdcard using adb and use that to restore a nandroid backup?
i am having the exact same problem right now. i tried a adb install of a update.zip for clock work and is saying that i dont have a androidmanifest.xml. also tried straight push and said i dont have permession to put on sd card
Hey man try removing SD card and similar card. Take out battery and have it unplugged from USB.
Put in battery hold volume down and power while plugging in USB.
Worked for me. Flashed jfd then flashed ji6 now running smooth
avengethis1 said:
Hey man try removing SD card and similar card. Take out battery and have it unplugged from USB.
Put in battery hold volume down and power while plugging in USB.
Worked for me. Flashed jfd then flashed ji6 now running smooth
Click to expand...
Click to collapse
Can you tell me what you did step by step? I'm doing it but I keep ending up on the screen from my original post...Also, did you get this problem because you checked repartition in odin or did you do something else?
I did have the problem from checking repartition.
1 pulled out everything from the phone (SD card,sim card, battery)
2 put in battery
3 hold down volume - and power button and plug in USB cable
hopefully this will put you in download mode.
4 used odin to flash stock jfd
5 rebooted phone
6 put in download mode through adb
7 used Odin to flash ji6
Last question, when you were doing it, before entering download mode, did you see a battery or vibrant screen?
EDIT:
Ugh...no matter how much I try I can't get into download...maybe my vibrant is hardware locked...
i got both but just played around with button combos till it went to download mode when i plugged in the cable
OK guys. So the trick about getting into Download Mode is to make sure phone is off, hold Power and both Volume buttons, when Vibrant screen shows up, release ONLY the Power button and you'll jump right in there!
.:|Sent from my Super AWESOME Vibrant using XDA App|:.
webmastertroi said:
OK guys. So the trick about getting into Download Mode is to make sure phone is off, hold Power and both Volume buttons, when Vibrant screen shows up, release ONLY the Power button and you'll jump right in there!
.:|Sent from my Super AWESOME Vibrant using XDA App|:.
Click to expand...
Click to collapse
Isn't that for recovery mode not download mode
Doing both things plus some other methods sends me back to recovery...I WAS able to push clockwork and a nandroid backup to the phone but it didn't help me restore...also I can use adb but that also sends me to recovery...any ideas?
Sent from my T-Mobile G1 using XDA App
avengethis1 said:
Isn't that for recovery mode not download mode
Click to expand...
Click to collapse
No. Recovery mode happens when you hold all 3 buttons until Vibrant screen shows up.
Download mode requires you to just let go off the Power button and continue holding the Volume buttons at Vibrant screen.
Very similar, but works like a charm for me and others every time. I learned it here in XDA!
Hello guys. My phone don't turn on when i press power button, VOL UP/DOWN buttons don't work also.
1. I flashed my vibrant with Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10*. Don't know why after what i can't access download mode by 3 buttons. I had Android System Recovery <3e>.
2. After that i try go to download mode with battery out method, and it was fine. Next step was downgrade firmware to T959UVJE8-factory-final-MS_Guru.
3. After that i had "Android System Recovery <2e>" message
4. I tried to reinstall back Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10* but something happend and Odin software Failed and i had "picture phone ! pc".
5. I tried both methods to go to download mode and after half an hour method with battery out and pushing vol up/down buttons accepted.
6. Then i tried to reinstall original firmware one more time. And it was fine. You can see screenshot in attachment.
7. But my phone after flashing turns off for rebooting and died.
When i trying to connect it with pc or charger nothing happens. Buttons don't work. Nothing on screen. Battery out not helped.
What to do??????
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
mbrockway said:
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
Click to expand...
Click to collapse
I think mbrock meant pit, not sit.
And yes, you only need the .pit and the .tar files.
~SB
mbrockway said:
Did you try holding volume up and down and plug in usb cable method to get into download? I'm kind of wondering why you had those other files in there. The guides I saw just had the sit and the pda tar.
Click to expand...
Click to collapse
Yes i tried this method. It doesn't work for me. I done all steps exactly how wrote MS_Guru in "Reflash Your Vibrant To Original Firmware"
bafxyz said:
Yes i try this method. It doesn't work for me. I do all steps exactly how wrote MS_Guru in "Reflash Your Vibrant To Original Firmware"
Click to expand...
Click to collapse
have you tried eugene's froyo that doesn't brick then go back to stock?
when going back to stock you only use the pda and the pit. that seems to be you problem.
Sent from my SGH-T959 using XDA App
iynfynity said:
have you tried eugene's froyo that doesn't brick then go back to stock?
when going back to stock you only use the pda and the pit. that seems to be you problem.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I used this one:
Eugene_SD+2E_JK2_Froyo Download >Vibrant_Full_Froydin_AND_2E_Recovery_+SD_Fixed
Unzip Download
&
Load s1_odin_20100512.pit into .pit at top of ODIN
&
Load Eugene_2E_JK2_Froyo.tar.md5 into PDA of ODIN
P.S. Tommorow i'll try to modify USB cable with resistors. Hope this will help me.
bafxyz said:
Hello guys. My phone don't turn on when i press power button, VOL UP/DOWN buttons don't work also.
1. I flashed my vibrant with Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10*. Don't know why after what i can't access download mode by 3 buttons. I had Android System Recovery <3e>.
2. After that i try go to download mode with battery out method, and it was fine. Next step was downgrade firmware to T959UVJE8-factory-final-MS_Guru.
3. After that i had "Android System Recovery <2e>" message
4. I tried to reinstall back Unofficial TMO 2.2 Froyo ODIN *2E Recovery +SD Fixed Updated*11/09/10* but something happend and Odin software Failed and i had "picture phone ! pc".
5. I tried both methods to go to download mode and after half an hour method with battery out and pushing vol up/down buttons accepted.
6. Then i tried to reinstall original firmware one more time. And it was fine. You can see screenshot in attachment.
7. But my phone after flashing turns off for rebooting and died.
When i trying to connect it with pc or charger nothing happens. Buttons don't work. Nothing on screen. Battery out not helped.
What to do??????
Click to expand...
Click to collapse
was your battery low when your flashing ?
djkdawg said:
was your battery low when your flashing ?
Click to expand...
Click to collapse
It was almost full.
Trying cable method with resistors. Not working
I've got exactly the same problem
After trying to flash my phone with odin it went black and that's it, nothing can wait it up (
Email me [email protected]
The best phone in the world
Maybe this info will be helpfull. In this situation with dead Samsung Galaxy, Vibrant, Captivate only one ressurection. You need to open your mobile phone and reflash boot loader using RIFF Box JTAG which you can find only in service center. And you need to save your IMEI information which you must read from this address 0х80000 and this lenth 0хA80000. Thats all.
i tried that method you decscribed , now my phone is in MOde that say "power reset or unknown upload mode" any clue about how to get into download mode from this. odib detects my phone in this mode but i don't think it will load the software since it is not in download mode.
Hello,
I almost bricked my phone while trying to root it with heimdall (followed instruction from CM site). Then I managed to get it into the download mode with the Jig and flashed the JFD stock using Odin. Now the phone is stuck at boot. It keeps boot looping after the Vibrant screen. Is there a way to get the phone back to normal. Any help is appreciated.
i dont use heimdall but i would try using odin and see if that works. Grab the pit file and tar file and try to odin back to stock with odin.
You must have done something wrong when flashing with Odin/Heimdall. Read EVERYTHING carefully again, and try flashing with Odin/Heimdall again.
If you are using Windows, i would recommend you to use Odin since most people here uses Odin. In the CM7 site says that Heimdall its better than Odin, but everyone here is flashing with Odin and so far i haven't heard of anyone having problems with it. Make sure to use Odin 1.7 or a later one, those are the one that are stable, Odin 1.6 or lower its unstable.
Yeah most people use odin. Whenever I have problems like this I do these steps and its always worked for me hope the same goes for you! Seems long but all the steps are really simple.
1. Pull out battery, sd card, and sim card
2. Let phone sit with battery etc. out for at least 10 min
3. Install sim card, sd, and battery.
4. Plug in USB and open odin, do not connect usb to phone yet
5.hold the volume up and volume down buttons (don't hold down the power button) while holding volume up and down plug the micro usb into your phone. This should put your phone into download mode.
6. At this point most times odin will recognize my device but sometimes I just have to unplug the micro usb and re-insert for odin to recognize. Just choose the stock pit and pda and flash.
7. Your phone is now stock!
Sent from my SGH-T959 using XDA App
GYM_RATttt612 said:
Yeah most people use odin. Whenever I have problems like this I do these steps and its always worked for me hope the same goes for you! Seems long but all the steps are really simple.
1. Pull out battery, sd card, and sim card
2. Let phone sit with battery etc. out for at least 10 min
3. Install sim card, sd, and battery.
4. Plug in USB and open odin, do not connect usb to phone yet
5.hold the volume up and volume down buttons (don't hold down the power button) while holding volume up and down plug the micro usb into your phone. This should put your phone into download mode.
6. At this point most times odin will recognize my device but sometimes I just have to unplug the micro usb and re-insert for odin to recognize. Just choose the stock pit and pda and flash.
7. Your phone is now stock!
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
What? I don't undestand how the phone will turn on with out press the power botton. I try your process and nothing. I have my phone brick thank you to CyanogenMod 3.1, after you install is impossible uninstall. I try flashing the NAND restore.
real simple here..
just turn ur phone off
turn on odin and make sure u have ur samsung drivers installed.
plug ur phone in with the usb
now hold down the two volume buttons first and then the power and let go of power when u see the vibrant logo pop up.
then it will pop up in dl mode.
This is how i do it all the time....
ps.. it may take a few takes but it always works
The phone was stuck at boot only after I tried to odin back to stock JFD using Odin 1.7. I tried several combinations (w/ or w/o pit, repartitioning etc) mentioned in several guide across the forum. But nothing worked, then I tried something stupid. I tried to flash KA7 through odin, as my phone had 2.2.1 when I got it, and that resulted in a complete brick. There is no response even to the Jig.
I finally called T-mobile and requested a replacement as the mobile was only 2 weeks old.