Hello,
Alright, so I tried flashing to the newest firmware and I ticked re-partition in odin (yea stupid me)... Now, I get the following
Code:
-- Movi_check Start..!!
checksum configuration need_checksum[0]
Not need checksum configuration
-- Movi_check already executed!!...
--movi_checking done!...
update media, please wait...
E:Cant mout /dev/block/st110
(invalid argument)
E:copy_dbdata_media:cant mount DBDATA:
copy default media content failed.
Now, I used adb to get into download mode, but now when I used adb reboot download, it sends me to recovery and i get this message...Is there anything i can do to at least get back to stock? Please Help D':
EDIT:
Would it be possible to somehow push the clockwork recovery to the sdcard using adb and use that to restore a nandroid backup?
i am having the exact same problem right now. i tried a adb install of a update.zip for clock work and is saying that i dont have a androidmanifest.xml. also tried straight push and said i dont have permession to put on sd card
Hey man try removing SD card and similar card. Take out battery and have it unplugged from USB.
Put in battery hold volume down and power while plugging in USB.
Worked for me. Flashed jfd then flashed ji6 now running smooth
avengethis1 said:
Hey man try removing SD card and similar card. Take out battery and have it unplugged from USB.
Put in battery hold volume down and power while plugging in USB.
Worked for me. Flashed jfd then flashed ji6 now running smooth
Click to expand...
Click to collapse
Can you tell me what you did step by step? I'm doing it but I keep ending up on the screen from my original post...Also, did you get this problem because you checked repartition in odin or did you do something else?
I did have the problem from checking repartition.
1 pulled out everything from the phone (SD card,sim card, battery)
2 put in battery
3 hold down volume - and power button and plug in USB cable
hopefully this will put you in download mode.
4 used odin to flash stock jfd
5 rebooted phone
6 put in download mode through adb
7 used Odin to flash ji6
Last question, when you were doing it, before entering download mode, did you see a battery or vibrant screen?
EDIT:
Ugh...no matter how much I try I can't get into download...maybe my vibrant is hardware locked...
i got both but just played around with button combos till it went to download mode when i plugged in the cable
OK guys. So the trick about getting into Download Mode is to make sure phone is off, hold Power and both Volume buttons, when Vibrant screen shows up, release ONLY the Power button and you'll jump right in there!
.:|Sent from my Super AWESOME Vibrant using XDA App|:.
webmastertroi said:
OK guys. So the trick about getting into Download Mode is to make sure phone is off, hold Power and both Volume buttons, when Vibrant screen shows up, release ONLY the Power button and you'll jump right in there!
.:|Sent from my Super AWESOME Vibrant using XDA App|:.
Click to expand...
Click to collapse
Isn't that for recovery mode not download mode
Doing both things plus some other methods sends me back to recovery...I WAS able to push clockwork and a nandroid backup to the phone but it didn't help me restore...also I can use adb but that also sends me to recovery...any ideas?
Sent from my T-Mobile G1 using XDA App
avengethis1 said:
Isn't that for recovery mode not download mode
Click to expand...
Click to collapse
No. Recovery mode happens when you hold all 3 buttons until Vibrant screen shows up.
Download mode requires you to just let go off the Power button and continue holding the Volume buttons at Vibrant screen.
Very similar, but works like a charm for me and others every time. I learned it here in XDA!
Related
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
No sir, you should be just fine, try to reflash back to stock using odin, pull the battery remove the sim and sd card, and then go into downloader mode, and try again.
stock FW here, good luck.
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
Read the froyo thread you need to adb reboot
Sent from my SGH-T959 using XDA App
still cant get it to work... i dunno what im doing wrong. but it seems like all the files needed arent in the link from above.
Keep trying
Try enter "downloading mode" with the sd card in the phone(after many attempts it worked for me), there is a thread in this forum about how to enter "downloading mode" and flash the phone.
still cant get out of the android system recovery mode.. ive tried holding buttons down while turning the phone on and off and theres nothng happening. still cant use the power button as the ok.
i got the same problem i cant use any button as ok
is there a way to get the ok button, or what i can do to get over this problem
thanks in advance
Let me know if these steps help:
Here is a couple of methods to get into download mode. Once you get to
download mode, follow the directions in second part of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up
on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on,
immediately release the power button but not the other two. Hopefully it
will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery,
sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power
button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep
holding all 3 buttons until the vibrant disappears and reappears. Once it
reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB
REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
How to get back to stock once in Download Mode:
Download the files in the linked thread and follow the directions there or
the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected.
If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that
once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two
options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Seems to be the same issue
I just tried upgrading to 2.2 using Odin and this seems to be the same problem. It seems that every solution starts with, "Enter Into Download Mode..." but no method seems to work.
I wouldn't say the phone is "bricked" as when it is plugged into a computer it will install the drivers and Odin sees it, but I can't get it into anything but recovery mode.
The buttons seem to be strangely mapped, the up and down buttons are reversed and the power button doesn't seem to be working as the "Ok" button. The menu toggles the recovery screen and the <!> graphic with the Android. Anyone figured out how to solve this? In the meantime I will continue attempting to get into download moad.
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
what happened?
I just got the same issue :S
the volumes buttons are wrong and the power (OK) button is not working on system recovery mode...
any help?
same problem - samsung galaxy vibrant
brianking21 said:
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
Click to expand...
Click to collapse
can't mount /dev/block/mmcblk0p1
(invalid argument)
e:copya_dbdata_media:can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
Folks, any update regarding this problem. I got very same problem, and could not find a solution yet.
hints?
I have the same problem also. I got into the problem by following a thread down grading to 2e version from 3e version. I've tried lots of things including going back to stock--or what I think is stock. I now have the 3e version again but when I bring up recovery mode the up/down buttons are backwards and the ok (power) key doesn't work.
Suggestions? HELP?
We can get into root console and manually tweak files if that will help.
UPDATE----SOLUTION
I got this working by reloading the stock t-mobile kernel from http androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/. This link provided at that site is single file so just use the pda and pit boxes in odin. In desperation I selected re-partion and Phone bootloader update.
I was unable to get into the recovery console with hitting any keys but adb did the trick. Volumn-up and power gets into the flash download
Finally Fixed it
I finally was able to get the phone into download mode by holding down the volume up key, the search key and the power key.
It seems the key mapping was just messed up.
After it entered download mode I followed the guide on androidspin /2010/08/09/ how-to-restore-or-recover-your-samsung-vibrant (add the .com to androidspin, forum won't let me post links yet)
Hi How did you hold the search key. It does not light up till the vibrant shows on screen. Can you please explain how to managed to hold vol up, power and search together? thanks
Sivaavis its only a 3-button combo, not 4. Why u holding down search? Its up,down volume and power and then when the vibrant logo shows u let go of power.
Sent from my SGH-T959 using XDA Premium App
If you are in recovery mode just go into adb and type in:
adb reboot download
You should be in download mode
First off i'd like to say im not new to android, im not a dev or anything but i know how to work myself around my phone. But unfortunately i think think i might have possibly semi-bricked my phone. After installing frankin twiz final rom with JAC kernel w/voodoo, i was then informed that the official JI6 update was released. After i disabled the voodoo lag fix I tried odining back to stock vibrant so i can hopefully get the OTA update. It appeared to have flashed correctly. But once i booted up my phone it booted through the samsung vibrant screen then the galaxy screen, then just stayed there for awhile and turned black. I have tried to enter download mode but i believe i have a hardware locked phone(i've tried over and over again but with no avail) so i don't think i can odin flash again. So i have no clue what to do anymore. Please help. thanks.
Can you get into recovery by holding down the +/- buttons and power button? If you can, you can boot into Clockwork recovery and use ADB to see if mount /data works and what file system is formatted.
Also if you can use the buttons to boot into recovery these are the steps you should follow to get into download mode and have ODIN recognize your phone properly.
1.) Unplug your phone from the usb cable
2.) Remove your battery, sdcard, and sim card
3.) Open ODIN
4.) Plug in your usb cable to the phone and computer
5.) Hold down the volume +/- buttons
6.) While still holding the volume buttons insert the battery.
7.) The phone should now be in download mode with the big yellow icon
8.) Odin should recognize that your phone has been connected
9.) Flash the JFD firmware following the instruction in JAC's JFD thread
Thanks silow for the reply, but i've tried that and it failed. Even before i bricked the phone i couldn't access the recovery nor download mode by the hardware button i had to either enter through ROM manager or through terminal. Any other suggestions? thanks again.
If you can't get into recovery using the hardware buttons you should return and exchange your phone because that is consider a defect.
Being unable to get into recovery or download mode when you have a "soft-brick" is dangerous business.
Sent from my SGH-T959 using XDA App
So I was using Odin to flash the stock ROM so I could flash to Nero v3...Had some trouble with Odin now this icon is all I can get the phone to show me. Attempts to get back into download mode haven't worked. I've done the Volume up + Volume - and Power button.
Did I brick my phone?
Did you have voodoo enabled when you flashed?
Unplug phone. Open odin. remove battery. Plug phone in. hold volume up/down keys. plug battery back in. should auto boot into download mode. I've seen that screen a few times and managed to go back to stock make sure its 512 pit jfd rom. Not ji6 513.
Sent from my SGH-T959 using XDA App
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
same issue somewhat....,.
Having trouble using ODIN!!
as now I did the steps and all I have is the phone will boot up through the tmobile screen & S after that screen goes black with the 4 hour button home row lit up.???
As for the recovery I get the following when booting it:
move_check Start..!!
checksum confirmation need_checksum(1300........)
mbr_checksum in header : 4:1
mbr checksum: 533a4003d.........
mbr checksum error
movingand checksum cofirmattion fail
movi_checking done!
update media, please
update media, finished
#manual mode #
appling muti csc
installin multi csc
Much help would be appreciated!!! Have to work all day today which will be slow, so I can work on fixing this. My main question is what type of file is pit & tar? Pit properties is coming up as a window shell comand, Tar opens with unknow app? Not sure if this is my problem or not, I get ODIN to run and complete the steps and end up with the above.
Using Odin V1.3
512.pit
t959UVJI6
bnielsen40 said:
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
Click to expand...
Click to collapse
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
raziel26 said:
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
Click to expand...
Click to collapse
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
icandy75 said:
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
Click to expand...
Click to collapse
thats the problem i cannot get into downloader mode
Have you tried the batt pull method? You could also try adb reboot download. If these do not work for you your will need a Jig to get her back to life.
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
raziel26 said:
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
Click to expand...
Click to collapse
Just pull the batt out. Plug usb to phone only first, hold down volume + and - and don't let go then plus in usb to your computer while still holding volume keys and put battery back in. That should work for you. A Jig is a rigged hardware piece that forces your phone to Dl mode.
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Sweet! that totally got me back into download mode...next question why am i getting stuck at file analysis?
bnielsen40, Boystuff, and Osuhsxr are totally right about the vol keys no crazy special soldering required.
osugsxr said:
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Click to expand...
Click to collapse
Check your PM.
i just flashed simply honey 3.8 via odin, i did back to stock before via odin (came from cm7) but after flashed simply honey, my phone stucked at rainbow screen sayin partition partition stupid partition, so i read that to get rid that rainbow i should flash gb bootloader, then i flashed the bootloader via odin, yeah the rainbow has gone but my phone keeps bootloping in vibrant and bullet screen then sayin partition2 bla bla, i can't get to odin with 2 button combo, it's just go to charging wtf, i can't even get to cwm via 3 buttons combo, help me guys, thx in advance
Have you tried
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Just checking, did you take out your battery, unplugged the usb, put the battery back in, then held vol up, vol down, and power and released all three as soon as you saw the Vibrant logo?
and if that doesnt work try all the steps above but minus one step! hold down both volume buttons except power and see if that works!
nomadrider123 said:
Have you tried
1. Start Odin
2. Plug USB cable into pc
3. Power off the Phone.
3. Pull the Battery.
5. Plug USB cable into Phone.
6. Press and Hold: Volume UP + Volume DOWN + Power, all at the same time.
7. Re-insert the battery.
8. The phone will power now, when the screen starts a cycle of going to a BLACK screen, release ONLY the POWER button.
9. When you see the download icon release the volume buttons,
10. Odin back to stock by putting the PIT file into the appropriate area and the .tar in the PDA area.
Click to expand...
Click to collapse
nah, it doesn't work, it just keep showing the charging screen, even i keep holding the three button then reinsert the battery it just keep goin to charge mode over and over and if i release the power button only the phone sayin "partition" in chargin mode but not get into download mode at all, im pretty desperate right now, this is my first smartphone and i bricked it, how stupid i am
movieaddict said:
and if that doesnt work try all the steps above but minus one step! hold down both volume buttons except power and see if that works!
Click to expand...
Click to collapse
no it doesn't work it still can't go to download mode, its in charging mode keep saying that stupid partition, thx for replying my thread btw
It's not bricked, I know you're mad and frustrated, trust me, I've been there a million times!
Lets try taking out the battery and leave it out for 15 minutes. Reboot your computer and unplug every usb.
Then try the above steps again.
crazy25000 said:
It's not bricked, I know you're mad and frustrated, trust me, I've been there a million times!
Lets try taking out the battery and leave it out for 15 minutes. Reboot your computer and unplug every usb.
Then try the above steps again.
Click to expand...
Click to collapse
tried it, still my phone can't see the download mode screen, i can't bring it to t-mobile since i don't live in states
If you flashed the bootloaders then the mapping is different. Try power button and volume up without the usb plugged and with the battery in. That should get you in download mode.
bricked
tried it, still my phone can't see the download mode screen, i can't bring it to t-mobile since i don't live in states
Click to expand...
Click to collapse
You are not bricked. I just had the same thing happen flashing the light version with Rom Manager. Since you flashed the Bootloaders, the key combination has changed. Hold down the volume up and power key. Release when you see the vibrant logo-that should take you into red recovery. When there, go to voodoo, choose disable. It will tell you it is 'actually enable' and will be disabled next boot. So reboot and let it do its thing. When I did it the Android in space finally showed up.
EDIT: I'm pretty sure you don't need to go into download mode to reflash with odin, just disable the lagfix. If it doesn't boot into the Android, then volume down+power will take you into download and reflash after the lagfix is finished disabling.
EDIT 2: And with the Gingerbread bootloader, you can't go into download mode if plugged in anymore. It will not go past the charger like on the Froyo Bootloaders.
EDIT 3: Sorry got the key mapping backwards, lol here it is straight from the Bootloaders site.
Gingerbread Bootloaders - No Rainbow - Fully visible Recovery on all ROMs
Benefits - No more rainbows on Gingerbread 2.3 ROMs like Simply Honey GB, LiDroid, Asgard, etc.
Convenient Key Maps for entering Recovery and Download Modes. (I personally like these mappings over the Standard Vibrant Mapping as you can enter download mode directly without needing to turn off phone or remove battery etc...)
For Recovery - Lower Volume Key + Power Button
For Download - Upper Volume Key + Power Button
Click to expand...
Click to collapse
RaymondPJR said:
You are not bricked. I just had the same thing happen flashing the light version with Rom Manager. Since you flashed the Bootloaders, the key combination has changed. Hold down the volume up and power key. Release when you see the vibrant logo-that should take you into red recovery. When there, go to voodoo, choose disable. It will tell you it is 'actually enable' and will be disabled next boot. So reboot and let it do its thing. When I did it the Android in space finally showed up.
EDIT: I'm pretty sure you don't need to go into download mode to reflash with odin, just disable the lagfix. If it doesn't boot into the Android, then volume down+power will take you into download and reflash after the lagfix is finished disabling.
EDIT 2: And with the Gingerbread bootloader, you can't go into download mode if plugged in anymore. It will not go past the charger like on the Froyo Bootloaders.
EDIT 3: Sorry got the key mapping backwards, lol here it is straight from the Bootloaders site.
Click to expand...
Click to collapse
YOU GUYS ARE AWESOME! THAAAAAAAAAANKSSSSSSSSS I can go to download mode, sorry for my noooobnesss
bricked
YOU GUYS ARE AWESOME! THAAAAAAAAAANKSSSSSSSSS I can go to download mode, sorry for my noooobnesss
Click to expand...
Click to collapse
Glad you are happy, lol! I'm flashing the medium version right now from recovery and will do the full whenever it finishes downloading.
Glad you got it worked out!
nasgadth said:
YOU GUYS ARE AWESOME! THAAAAAAAAAANKSSSSSSSSS I can go to download mode, sorry for my noooobnesss
Click to expand...
Click to collapse
I'm impressed with your risk taking capabilities man... Dont know how old you are to Android, and I'm not commenting on that, but from what I see, you are just 15 posts old, and you managed to flash Bootloaders to your phone...
Do read the OP for possible solutions before you flash anything... That said, till you have a screen, its not a brick.
Flash the bootloaders, using the new key mapping, and then flash the ROM, you should be good to go !!!
maybe one of you guys can help me here
i have the rainbow screen and i cannot get computer to recognize phone. i have to get into download mode with a dongle and odin still does not recognize my phone. i cannot boot into recover as the screen is completely rainbowed out and I cannot see what I am doing.
Are there any suggestions on what to do from here?
Thank you
Hi everybody,
I was on Bionix V Fishman Mod Final Update 3 until yesterday. I then decided to flash CM9 latest nightly rom so I disabled voodoo and flashed it.
The rom worked but I wanted to go back to another rom. I couldn't enter recovery mode through the button combos so I entered with the adb command.
I tried flashing two different roms but I got this error:
Amend scripting (update-script)is no longer supported
Amend scripting was deprecated by Google in Android 1.5
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages.
Installation aborted.
Then after a couple of more tries in the recovery I tried reboot the phone but then it got stuck on the first screen, the one that came with GB bootloader I installed a while back.
Download mode doesn't work either. Is there any thing I can do?
Thanks everyone!
hi,
AFAIK you can go back to stock using Odin. Try these steps to go back to download mode.
Open Odin
Pull the battery out
Plug the usb into the computer (dont connect the other end to the phone yet)
Now hold BOTH volume keys (UP + DOWN) and plug the usb to the phone
While pressing volume buttons insert the battery
OR try One-Click Unbrick
You can FIND more about going back to stock [including links] from here : http://forum.xda-developers.com/showthread.php?p=13132341#post13132341
tc
I can't enter download mode using that method.
One-Click Unbrick didn't work, It gave a message saying : Is your phone plugged in? is it in download/softbrick mode?....
How do I know if it's soft brick? The only screen I see says: "ANDROID -AdyScorpius-"
Any other ideas?
Do you have samsung USB drivers installed
EDIT: If none of above works Im sure anybody will help you out..
I hope so... thanks anyway haarsh!
haarsh said:
hi,
Open Odin
Pull the battery out
Plug the usb into the computer (dont connect the other end to the phone yet)
Now hold BOTH volume keys (UP + DOWN) and plug the usb to the phone
While pressing volume buttons insert the battery
Click to expand...
Click to collapse
barya said:
I can't enter download mode using that method.
<SNIP> The only screen I see says: "ANDROID -AdyScorpius-"
Click to expand...
Click to collapse
Listen to haarsh, he is correct. Just so you know, you do not have to have the Android with the shovel in the download screen to be in "actual" download mode. When you have Odin open and do the steps above, what you are really looking for is that Com: screen to light up Yellow. Then you are in download mode.
FYI, as long as you have power and are at the very least getting to the bootloader screen, you can recover. Just tread lightly bc screwing with the bootloaders is one of the sure-fire ways to HardBrick your device.
woody to the rescue... thnx brother
tc
I tried to do that now and the only response the phone does is show that litle circle of radial lines which means he is charging.
Odin doesn't recognize and the com doesn't light up.
Just curious but what two ROMs did you flash that threw the error in your OP? Were they ICS ROMs or did you try and play it safe and flash Fish's Bionix again?
Keep trying to get into download mode by using the key combo of Volume Up and Power (since you are on GB bl's). You have power so you can get out of it but it might take more than a few tries.
Edit:
***----> I am having all kinds of trouble with my browser today at work, so if I don't respond right quick, that is why. But I'll get back to you or some others out there can help.
OK I got into download mode! as a matter of fact I forgot about this method of just volume up and power and it succeeded the first time.
Thank you very much to the both of you, sorry for all the trouble...