I realize this sounds like a total Noob question, of which I'm not, but I'm lost.
Coming from an Omnia i910 which I flashed with a Winmo 6.5 ROM. That was it. I honestly don't remember seeing separate kernels and ROMs. Was that since it was a MSFT product?
Here I am seeing them separate. Do the ROMs posted include a kernel already, or do I have to install that first?
Please take pity on this refugee from Redmond. (if it should be in another Tbolt forum please move it)
Robert
I'm a hell of a lot closer to n00b than dev but here goes. All of these ROMs have a kernel already baked in. Most of them contain a kernel right from the forums. Basically, kernels are like ROMs in the sense that it is all about preference. Half of the fun is finding a ROM/kernel combo that works great for your phone. Some kernels don't work as well with some phones due to the overclock (which is controlable by you with SetCPU) and being undervolted (not controlable by you). My phone doesn't like to be too undervolted.
Just make sure you have a reliable backup handy and go have fun. Check for responsiveness of the phone and for me, battery life. If you get random reboots then you are either overclocked or your phone doesn't like the undervoltage.
Personally, I like to find a good ROM I like and then I will flash every kernel I can find to get a great match.
kernels are included in every rom...they are generally more conservative so they will work with most every phone. if you choose you can flash a more aggressive kernel after flashing the rom but you may have instability issues...you do not need to wipe data or cache however it is recommended to wipe dalvik cache before flashing kernels.
EDIT: someone beat me to it lol
Hey, me too in regards to the omnia the 6.5 flash alike. This is my 1st Droid and I being a noob successfully rooted it. You could just flash the ROM because the kernel is already cooked in. Just look at various kernels as enhancements to your Rom. Jump in folks who isn't a noob like me.
Sent from my BAMF ROM Thunderbolt using XDA App
Robertjm said:
I realize this sounds like a total Noob question, of which I'm not, but I'm lost.
Coming from an Omnia i910 which I flashed with a Winmo 6.5 ROM. That was it. I honestly don't remember seeing separate kernels and ROMs. Was that since it was a MSFT product?
Here I am seeing them separate. Do the ROMs posted include a kernel already, or do I have to install that first?
Please take pity on this refugee from Redmond. (if it should be in another Tbolt forum please move it)
Robert
Click to expand...
Click to collapse
The kernel is the core control module if you will for any OS. Without the kernel all you have is a fancy collection of hardware. It is absolutely necessary for the operation of any operating system.
A ROM is a packaged collection of programs designed to function as a whole unit. This includes a kernel and base os along with all of the additional programs and functions that you want and use on your device (think phone functions, messaging, etc al).
With the different Kernel builds, devs are attempting to make tweaks to the basic OS parameters in an attempt to optimize the basic OS functions.
That is kinda a simplistic explanation, however I think it gets the point across.
Thanks guys! I will probably go with something Adrenalyne as I remember his work from Modaco.
This thread should be in the general section, not dev
Sent from my ADR6400L using XDA App
sublimaze said:
This thread should be in the general section, not dev
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
^^^ this...
Related
Just started reading about my Eris today and all the "aftermarket" stuff I can do with it. I've spent the last couple hours reading through here and androidforums but can't find the exact answer I'm looking for.
I did the "HTC Eris 1 Click Root App" and all went well. I've also installed SetCPU from this site. I'm sure there is something else I have to do b/c SetCPU is giving me no options to go above 528. It appears I have to install a patch of some sort from this thread: (can't link but it's the "Overclock Patch and update.zip" thread in the Eris development area) but do I install the patch.txt, the zimage or update and what do I do after they are installed?
I've read plenty of talk about other ROMS's but I'm fine (for now) with the stock one. Can I OC without installing an entire new ROM?
Thanks in advance!
J
you need to flash an overclockable rom, try flashing this one:
http://forum.xda-developers.com/showthread.php?t=679194
or
http://forum.xda-developers.com/showthread.php?t=745708
those are just two of the many roms, if you need help flashing it dont bother making a new thread, do a google search, look on the xda wiki, or PM me.
Captainkrtek said:
you need to flash an overclockable rom, try flashing this one:
or
those are just two of the many roms, if you need help flashing it dont bother making a new thread, do a google search, look on the xda wiki, or PM me.
Click to expand...
Click to collapse
After doing some more reading I would like to find a ROM that OC's above 700 automatically, removes the extra garbage that Verizon loaded (footprints, amazonmp3, etc...) and is a one stop shop. It looked like both of those you linked have some things missing or there are other step once you initially flash it.
When I do flash a new ROM I loose everything right? I'll have to re-load all my aps and stuff...
I'm going to go try and read up on flashing, NANDing and backing sutff up but will probably end up PMing you to make sure I got it all right.
Thanks!
J
P.S. had to remove your links so I can post my response.
Also, what's the difference in a ROM that has "sense" and one that doesn't? What am I missing or gaining?
Sent from my Eris using XDA App
jjchambers said:
Also, what's the difference in a ROM that has "sense" and one that doesn't? What am I missing or gaining?
Sent from my Eris using XDA App
Click to expand...
Click to collapse
Sense is HTC's custom user interface. It consists of a custom theme, app launcher, and many different apps and widgets. The best way to find out what you are gaining and losing is to try out a sense rom and a non-sense (or "vanilla") rom. Always do a nand backup before flashing new roms. You never know what could go wrong.
As for the overclocking, the kernel the rom uses determines if you can overclock and how high you can go with it. Most roms are clocked to 710 as this is the highest and most stable speed that will work for all eris's. Some phones are able to get up to 804 without freezing or crashing but not all can. DO NOT check set on boot till you find a stable speed or you can get stuck on a boot loop.
Feel free to pm me if you have any more questions. I'm not a dev but I'll try my best to help you out.
Sent from my leaked rooted HTC Droid Eris with Sense-Able 3.1 using Swype
Best results come from doing some work yourself
Sent From My Eris w/Tainted Tenzo +LP Plus
sent you a PM Orkilla
I searched thru much of the articles and I am still a little fuzzy on the modification of the kernels.
When I added the stock enhancement, did it modify the kernel?
And if it did how big a deal is it? and if so how do you get back to the basic kernel?
This is the only subject that I find little organized info on. Probably an over sight on my part.
It is a little fuzzy, but you have to go through each dev area to see if you are getting a customized kernel or not. Example: TNT Lite does not have oen, but gADAM does. I state this in my first post.
Customized kernels give you better performance and things the vendor has not added (like CIFS support). Going on two of the kernels I've seen, you might need to be fairly technical to use them.
I am mulling over adding a customized kernel to TNT Lite, and breaking my usual protocol. Still debating that.
Can we load different kernals freely and switch between them if we want to try different ones? I'm on Vegan 7 and has pershoots kernal but i've also heard good things about clemsyns. I'm happy with the performance right now so if switching will open a can of worms id rather not, but if it's relatively risk free I wouldn't mind trying it out.
New kernels should not be taken lightly. Considered it the same danger as flashing a new rom.
Thanks all but I am still wandering.
My kernel ver is 2.6.32.9-00000-10.8.2-dirty
[email protected] #16
Is this stock or not? If not is it a problem?
Thanks in advance
Mantara said:
New kernels should not be taken lightly. Considered it the same danger as flashing a new rom.
Click to expand...
Click to collapse
Thanks, I'll stick w the setup i have now, battery lasts all day and it's pretty fast.
cruiser771 said:
Can we load different kernals freely and switch between them if we want to try different ones? I'm on Vegan 7 and has pershoots kernal but i've also heard good things about clemsyns. I'm happy with the performance right now so if switching will open a can of worms id rather not, but if it's relatively risk free I wouldn't mind trying it out.
Click to expand...
Click to collapse
you are free to upgrade your current kernel on vegan7, by flashing the .zip in my thread, through recovery, if you like.
this will bring you up to 2.6.32.36. be sure to flash the _gb file for gtab.
if you are using any external modules (cifs, etc.) those will also need to be updated. you can grab them from the lib..zip and push them to your system. instructions can be found on the droidbasement postings for gtab.
Finding good kernel install instructions is not that easy to find
roebeet said:
It is a little fuzzy, but you have to go through each dev area to see if you are getting a customized kernel or not. Example: TNT Lite does not have oen, but gADAM does. I state this in my first post.
Customized kernels give you better performance and things the vendor has not added (like CIFS support). Going on two of the kernels I've seen, you might need to be fairly technical to use them.
I am mulling over adding a customized kernel to TNT Lite, and breaking my usual protocol. Still debating that.
Click to expand...
Click to collapse
Roebeet,
Please do as so far have not been able to find good kernel install instructions for the two ones you mention on your TnT Lite 4.x.x post. If you have somewhere good directions on how to update kernels please add/link them to your post as more than one technical nOOb like I are willing to read about it.
In case I do get lucky and you see this please invest 30 seconds reading this post as I hope it could help to increase speed as sdcard/sdcard2 have both the same cache http://forum.xda-developers.com/showthread.php?t=1012774
As always thanks for all you do and you will be enjoying a coffee/beer as soon as I get my gTablet delivered all the way down where I live (South America)... so you could imagine I am still have plenty of time to keep reading
achernez said:
Roebeet,
Please do as so far have not been able to find good kernel install instructions for the two ones you mention on your TnT Lite 4.x.x post. If you have somewhere good directions on how to update kernels please add/link them to your post as more than one technical nOOb like I are willing to read about it.
In case I do get lucky and you see this please invest 30 seconds reading this post as I hope it could help to increase speed as sdcard/sdcard2 have both the same cache http://forum.xda-developers.com/showthread.php?t=1012774
As always thanks for all you do and you will be enjoying a coffee/beer as soon as I get my gTablet delivered all the way down where I live (South America)... so you could imagine I am still have plenty of time to keep reading
Click to expand...
Click to collapse
I deployed Clem's kernel to TNT Lite, this afternoon.
That sdcard item is interesting, but I'd have to really dig into it, more. It's an init.rc change so it would have to be added to a boot.img. Past experience has shown that it's best that I let some of the Power Users beta-test and report back first, before dropping it in a mod.
pershoot said:
you are free to upgrade your current kernel on vegan7, by flashing the .zip in my thread, through recovery, if you like.
this will bring you up to 2.6.32.36. be sure to flash the _gb file for gtab.
if you are using any external modules (cifs, etc.) those will also need to be updated. you can grab them from the lib..zip and push them to your system. instructions can be found on the droidbasement postings for gtab.
Click to expand...
Click to collapse
ok I put the file "boot-cm_2632.36_gb-xtra-vfp_fp-032711.zip" on the tablet, should i wipe the cache or can i just apply the update. i already did a backup
edit: just did some google searching, I wiped the cache and dalvik, all is well, thanks pershoot!
I am brand new
Which ROM?
R there any ICS ones?
WOuld love to hear ur thoughts
Thank you
Seriously, if you don't know whether or not there's even an ICS ROM available yet, maybe you shouldn't be flashing a $600+ phone, yeah? Or, you know... use the search tool?
screamworks said:
Seriously, if you don't know whether or not there's even an ICS ROM available yet, maybe you shouldn't be flashing a $600+ phone, yeah? Or, you know... use the search tool?
Click to expand...
Click to collapse
Will do. Thanks!
screamworks said:
Seriously, if you don't know whether or not there's even an ICS ROM available yet, maybe you shouldn't be flashing a $600+ phone, yeah? Or, you know... use the search tool?
Click to expand...
Click to collapse
+1
you should try with stock rom for a while, start reading about flashing roms and you will be ready to flash
I know it's annoying to have to wait, but it's better to do it, than wind up with a potentially ruined device.
@benyben123
I suggest trying out Checkrom 4.0. It is very stable
Stock ROM but ROOTED and your' good to go..................friendly recommendation
Dude, if You just got Your phone and don't know what rom to choose at first learn the device. You don't need neither custom rom nor root. These are just addons for great device. It's common that people don't use their device but play with it and it ends badly. You assumed that any rom is good apart from stock but stock rom is very good. Also You don't need to root it instantly. Some say that "phone is unusable in non rooted state" - it's bull s**t. Apps that require root are designed to meet very specific needs, not for regular users. It's because android is veery advanced and allow many things without administrator privileges (this is not an iphone !). Remember - people think that root is "something everyone should do at once" - no it's not, and it's very dangerous in hands of unexperienced user. One false move with root privileges and You will start learning many things about flashing at once just to recover your device. Also remember that this is not another "application privilege". App with root privs is capable of wiping entire system in a seconds including IMEI data etc.
It's really friendly advice - leave Your phone as it is for now, learn how it works, install some apps and read as much as You can. Then You will know what your device is capable of and what can be achieved by rooting / flashing kernels or roms. Flashing without a reason, just for fun is stupid and ends with full pants.
Regards
Slig
Thank you all for all your responses!!! Much appreciated!!!
Official MIUI without a doubt. The best ROM I've used on any device.
Sent from my GT-I9100 using xda premium
Fredriksen said:
Official MIUI without a doubt. The best ROM I've used on any device.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
But is MIUI even supported? Isn't it ported (which means its not so good, but only kinda?)
benyben123 said:
But is MIUI even supported? Isn't it ported (which means its not so good, but only kinda?)
Click to expand...
Click to collapse
...another thing worth to read about. What do You mean by supported ? It's supported by it's designers.
For SGS2 we have custom ROMs like CheckROM - modified Samsung officials, added some tweaks, apps, removed less usable apps. And ROMs like MIUI or CyanogenMod - they are AOSP (android open source project) and have little in common with Samsung official firmware, ex. no TouchWiz so some Samsung specific apps will not work on them. According to Wikipedia - MIUI is based on CM7.1 sources.
MIUI is not "ported", it's prepared for many devices including SGS2.
Don't do *anything* until you've done a *lot* of reading. Enjoy the phone. It's a fantastic device simply running stock firmware.
Once you're comfortable enough to be able to do it in your sleep (And not before. If you have to ask questions about this, you're not ready. It is an absolutely simple process), root your phone using a CFRoot kernel.
This will enable you to remove/freeze all the crap telcos/Samsung put on the phone and all the other joyful things that come with having a rooted phone. And do a lot more reading. Only this time read the threads devoted to the various roms/kernels. Read other users experiences with these. The features. Pluses. Downsides. Ask specific questions about them in these threads.
From there, you can make an informed decision about a rom/kernel combo to try. Believe me, if you do a couple of weeks of reading/research before you do anything, you'll reap the rewards.
If you jump in the deep end without understanding what you're doing, you could end up with a soft brick that might take you a few days to fix at best. Or returning the phone to Samsung /potentially having to pay to have it repaired out of your own pocket at worst.
Just a few things to consider
I'm planning on getting this device shortly & was wondering if the stock kernel will work with most of the roms developed here? I'm just trying to do my homework so I can be ready when I have it in hand. I'm so ready to ditch the g2x.
Sent from my LG-P999 using xda premium
TBH I haven't seen a stock kernel NOT work with a Custom ROM. The only thing is some of the features i.e. Wifi Calling may not work. So it's always best to flash the recommended to avoid boot loops or bugs.
I just looked at four of the most popular ROMs, and in less than five minutes read that only one of them said stock kernel was ok. The other three say to flash either faux's kernel, xboarder's newest kernel, or the included boot.img in the download.
But yes the stock kernel will work but like just mentioned it will have limited functionality. In my opinion, read what the dev says in their OP and throughout their thread, but a whole thread on this isn't necessary.
I don't mean to be rude, just saying it like it is. Welcome!
Sent from my HTC_Amaze_4G using XDA App
Thanks for ur replys guy's. I have always used the stock kernel with every rom on every device I've used. I'm new to flashing kernels & every time I tried flashing a kernel I've always had issues. Thanks again for ur answers.
Sent from my LG-P999 using xda premium
I wonder how this thread's topic relates to development...
Okay let me clarify the whole kernel thing.
We have three types kernels to chose from.
The stock OTA kernel. That's what your phone comes with. It is secured which means it will not allow scripts to auto-start (which means that init.d is worthless) and does not default with superuser access from adb or terminal. You can still get root access but you always need to do "su" command.
The unsecured kernel. This is the kernel that comes with your rom. This is commonly found in the zip file of the custom rom that you download. The custom rom DOES NOT (which also means DOESN'T, WON'T, WILL NOT, CAN'T and CAN NOT) update the kernel by recovery like almost all the other phones do. We believe this is because we have bootloaders with S-ON. When or IF we get s-off we may be capable of flashing a kernel by recovery.
Faux123's kernel.
Refer to [Kernel]HTC Stock[2.6.35.13](v0.0.7)OC~1.73/UV/CIFS+UTF-8[Dec-30]
Q&A
But can't we flash Faux's kernel by recovery?
Yes and no. I developed a workaround to make that work however it doesn't directly flash the kernel from the recovery. It flashes the kernel after the phone has already booted which is why a second reboot is required.
Well... why not? I don't understand.
Unfortunately since the phone MUST come to a complete boot from a kernel that initiats init.d scripts (unsecured kernel as described above), we cannot use the above method going from a pure rooted OTA rom or when going from SenseUI 3.0 to SenseUI 3.5 or ICS roms. Let me know if you're confused by this.
Alright... so can you tell me more about Faux's kernel?
Well since I'm not Faux123 I'll try to answer this.
It's a slightly modified version of the unsecured kernel (capable of executing init.d scripts) that has been tweaked to allow slight over clocking and control over the voltage going to the CPU and RAM of the phone. This can help you or hurt you. You can push your processor harder and faster to increase performance but you may lose stability and drain your battery faster. Alternatively you can reduce the voltage and preserve battery life. At this time the kernel is NOT complete due to HTC not releasing the full source of their TI drivers. It would appear that since it is not technically their drivers, they don't have to release it.
So... what's the problem making the kernel?
Faux123 tried to make the kernel from source, unfortunately without the full source attempting to do so will lose wifi and wireless tethering abilities. Again... blame HTC for that. Until they release the full source we're stuck with this limitation.
So all this talking about kernels you still haven't explain how to flash it?
This part is easy.
Use this: [Guide][Tool] Kernel Flasher 2 Step/Kernel Restore Tool||Noob Proof||V3 released || or whatever directions are included with the ROM or kernel that you're interested in flashing. If you're skilled enough you can just use the fastboot commands.
From bootloader:
fastboot flash boot c:\directorytoboot\boot.img
(replace c:\directorytoboot with actual directory)
So in conclusion... as soon as HTC releases s-off for our devices as well as the full kernel source code we can have some really kick @$$ phones! Until then... we have to [email protected]$$ everything such as fastboot flashing our half-a$$ modified kernels. It's not the rom or kernel developers fault... it's HTC's.
Felinos11 said:
I wonder how this thread's topic relates to development...
Click to expand...
Click to collapse
Yeah yeah... I'll move it.
Thank you binary for your excellent explanation. I posted it here because the people with the knowledge frequent this board & hope they would see it. I apologize if I posted this in the wrong place.
Sent from my LG-P999 using xda premium
Binary100100 said:
Yeah yeah... I'll move it.
Click to expand...
Click to collapse
so how do I go back to stock kernel binary!!!!! i kid, i kid!!!
Stock kernel works fine.
seansk said:
so how do I go back to stock kernel binary!!!!! i kid, i kid!!!
Click to expand...
Click to collapse
Go choke on some nitrous.
Binary100100 said:
Go choke on some nitrous.
Click to expand...
Click to collapse
I love nitrous oxide, we had to try in in school, you should try it sometimes, we use it on kids, and some adults unfortunately that act like kids on the dental chair
seansk said:
I love nitrous oxide, we had to try in in school, you should try it sometimes, we use it on kids, and some adults unfortunately that act like kids on the dental chair
Click to expand...
Click to collapse
I'll try it while at the range. The range masters should love that.
Binary100100 said:
I'll try it while at the range. The range masters should love that.
Click to expand...
Click to collapse
Hmm...I don't know if those two will mix well!!!
So as the title says my gs2 is on its way! Unlocked international version. I plan on rooting, and installing cwm, do a nandroid of stock, then install an ics rom which rom is the most stable and have everythijng if not almost everything working properly?
Sent from my SPH-D700 using Tapatalk
PLS search and read ...
PLS search and read ... there are a lot of threads covering ICS.
Wrong section = Q&A
ICS is not released test at your own risk .
jje
jerseykat1 said:
So as the title says my gs2 is on its way! Unlocked international version. I plan on rooting, and installing cwm, do a nandroid of stock, then install an ics rom which rom is the most stable and have everythijng if not almost everything working properly?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
WTF??? A quick Google of SPH-D700 shows that to be the Samsung Epic 4G, which is a Sprint phone. The I9100 is a GSM phone. Sprint is a CDMA network. I hope you're planning on changing carriers if you hope to use the I9100.
Unless you're just confused, and actually ordered a Sprint variant of the Galaxy SII, which is the SPH-D710, or as they call it, the Epic 4G Touch.
Just so I'm clear, the I9100 will NOT work on Sprint's network.
Yea I'm aware that I am on sprint right now. I am aware that the i9100 is GSM, and yes I will be using att.
Sent from my SPH-D700 using Tapatalk
jerseykat1 said:
Yea I'm aware that I am on sprint right now. I am aware that the i9100 is GSM, and yes I will be using att.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Hey, I had to check. Some folks just make uninformed decisions and are baffled when the equipment they order doesn't work on their network.
LP6 with my GPS fix works pretty damn well. FM Radio is the only real issue I have encountered. If you want a more ICS experience, push trebuchet or NOVA launcher to /system/app and it will be much better.
Sent from my Galaxy Tab 10.1 iPad knockoff
It's so popular it's one of those phones - like Desire HD - that's known inside and out Been out in europe for ages, but the US had better carrier specific devices, faster CPUs, etc. At it's core the same device mind.
I was in no rush for ICS but tried WanamLite and all was fine, although the launcher freezes now and then which I put down to a full phone, and an early rom.
This used the CM9 trebuchet launcher. I've got to say almost everything about ICS is cleaner, faster, smoother than previous roms - custom or not. Easy task control, nice display, and little things I still keep discovering like when you connect via USB you get a choice of media device or camera (with the usual USB development option off).
I've had this thing months and must have flashed 50+ roms lol. In the end I stuck with Leomars then the combined Leomar/Checkrom HD because of the kitchen app for easy addons and upgrades.
If youve never used a samsung dont worry, its usually a simple app that will root it and install a recovery console <- very important, cause after that you can flash anything, and as long as you get back to recovery youll be fine. Backup often - complete rom via the recovery (power on, vol down) and a data/app backup with Titanium.
I don't think you need worry about ADB or odin anymore, but if you do just follow instructions on this site...
Your reward? the best phone around esp if the rom you use adds neat things like Jkays extensions, modded apps, kitchens, good theme engine, etc. For pure Android go for AOSP roms, otherwise they're a mish mash of parts.
Change the boot anim if you want, you might get a yellow warning triangle because the sammy knows the roms "illegitimate" but its easily removed.
Finally, should you need to, the stock roms and kernels and modems are here too if you need to get everything back to default, best get them quick as the download sites are dissapearing, or rip yours first before you burn another...
Have fun! You couldn't pick a better handset right now
essjayar said:
It's so popular it's one of those phones - like Desire HD - that's known inside and out Been out in europe for ages, but the US had better carrier specific devices, faster CPUs, etc. At it's core the same device mind.
I was in no rush for ICS but tried WanamLite and all was fine, although the launcher freezes now and then which I put down to a full phone, and an early rom.
This used the CM9 trebuchet launcher. I've got to say almost everything about ICS is cleaner, faster, smoother than previous roms - custom or not. Easy task control, nice display, and little things I still keep discovering like when you connect via USB you get a choice of media device or camera (with the usual USB development option off).
I've had this thing months and must have flashed 50+ roms lol. In the end I stuck with Leomars then the combined Leomar/Checkrom HD because of the kitchen app for easy addons and upgrades.
If youve never used a samsung dont worry, its usually a simple app that will root it and install a recovery console <- very important, cause after that you can flash anything, and as long as you get back to recovery youll be fine. Backup often - complete rom via the recovery (power on, vol down) and a data/app backup with Titanium.
I don't think you need worry about ADB or odin anymore, but if you do just follow instructions on this site...
Your reward? the best phone around esp if the rom you use adds neat things like Jkays extensions, modded apps, kitchens, good theme engine, etc. For pure Android go for AOSP roms, otherwise they're a mish mash of parts.
Change the boot anim if you want, you might get a yellow warning triangle because the sammy knows the roms "illegitimate" but its easily removed.
Finally, should you need to, the stock roms and kernels and modems are here too if you need to get everything back to default, best get them quick as the download sites are dissapearing, or rip yours first before you burn another...
Have fun! You couldn't pick a better handset right now
Click to expand...
Click to collapse
Just FYI. Bold/Italic/Underlined part is not exactly true. Some of the US carrier specific models have completely different hardware, and have faster clock speeds because they use inferior CPUs.
i got my i9100 today. but i am having some problems trying to get it rooted. using this method here http://forum.xda-developers.com/showthread.php?t=1125414 when i go to get the insecure kernel my kernel is not listed, and my original kernel is not listed either. So i am not sure if i do this rooting method using any kernel from the list if it will brick my phone or not.
waiting a reply from someone in the threads before i proceed.
2.6.35.7-i9100xwkj2-cl676699
[email protected] #2
jerseykat1 said:
i got my i9100 today. but i am having some problems trying to get it rooted. using this method here http://forum.xda-developers.com/showthread.php?t=1125414 when i go to get the insecure kernel my kernel is not listed, and my original kernel is not listed either. So i am not sure if i do this rooting method using any kernel from the list if it will brick my phone or not.
waiting a reply from someone in the threads before i proceed.
2.6.35.7-i9100xwkj2-cl676699
[email protected] #2
Click to expand...
Click to collapse
From what I can tell, you need the insecure KJ2 kernel. That kernel is no longer directly linked on Odia's insecure kernel page, but there's a link to his Hotfile upload site where all older kernels are stored.
ctomgee said:
From what I can tell, you need the insecure KJ2 kernel. That kernel is no longer directly linked on Odia's insecure kernel page, but there's a link to his Hotfile upload site where all older kernels are stored.
Click to expand...
Click to collapse
never dawned on me that i had an older kernel and that i should look at the older kernel list.. (i did just buy the phone) Duuuuuhhh.. no i am not being sarcastic (text doesnt always translate your true intentions, just thought i would clear that up)
Thank you.
jerseykat1 said:
never dawned on me that i had an older kernel and that i should look at the older kernel list.. (i did just buy the phone) Duuuuuhhh.. no i am not being sarcastic (text doesnt always translate your true intentions, just thought i would clear that up)
Thank you.
Click to expand...
Click to collapse
Tech moves at lightspeed.
ctomgee said:
Tech moves at lightspeed.
Click to expand...
Click to collapse
I am officially rooted. Thank you very much. now to get CWM installed!