Can be very wonky at times. When the two points are directly beside or above/below each other on the x or y axis it seems to lose tracking of both points most of the time. Makes the pinch to zoom somewhat more difficult as you have to do it at an angle. Just wondering if everyone elses G tablet does this also.
Thanks!
Hmmm 52 views and no replies?
Nope, no issues here. Have you tried the touch recalibration app? Or reflashing? Do you only notice this in certain apps or is it everything?
Thanks for the response! Haven't tried reflashing but did do the calibration app a while and it helped somewhat. It does seem to be with every app. Think I will reflash and see if that alleviates it.
Thanks!
I don't believe the G-Tablet multitouch is as good as people say it is. My girlfriend had purchased Glow Hockey 2 on my tablet because she wanted to play air hockey against me, only to find that when two points on the screen are touched, the accuracy and responsiveness of the touches drop nearly 75%. It's a shame too, as that game looks to be a sure-fire hit with tablet devices.
I'm pretty sure that it is a hardware limitation, not a software limitation that can be fixed with re-flashing or calibration.
Enectic said:
Can be very wonky at times. When the two points are directly beside or above/below each other on the x or y axis it seems to lose tracking of both points most of the time. Makes the pinch to zoom somewhat more difficult as you have to do it at an angle. Just wondering if everyone elses G tablet does this also.
Thanks!
Click to expand...
Click to collapse
have you calibrated your screen ?
slsmag said:
have you calibrated your screen ?
Click to expand...
Click to collapse
Yup, responsiveness is great. Multitouch leaves a bit to be desired.
I can confirm this problem on my tab, with all rom's except the TnT ones (never tried them). Using multitouchvisualizer app from the market you can see that the screen will not register 2 points immediately when they have the same x (horizontal line) or the same y (vertical line). The problem is definitely better after calibrating the screen (doesnt take as long to register the second point), but the problem persists and leaves something to be desired for this multitouch screen. When pinch to zoom is at an angle to vertical or horizontal, its perfect. If pinching on the horizontal or vertical axis, there is lag.
Normally this doesn't matter because you can just pinch-to-zoom on an angle, but when playing games like cordy or jetcarstunts, where buttons are aligned horizontally, the second tap sometimes isn't recognized immediately. Its somewhat nit-picky, but there are many other touch screens where this is not a problem.
Make sure that you have the proper permissions files available. If you are missing the "Multitouch Distinct" XML file then it doesn't work properly...
Early ROMs didn't have it, so you had to add it manually...I think newer ROMs have it though...
I've attached it here JIC -- just remove the ".txt" extension and drop it in
TeutonicWolf said:
Make sure that you have the proper permissions files available. If you are missing the "Multitouch Distinct" XML file then it doesn't work properly...
Early ROMs didn't have it, so you had to add it manually...I think newer ROMs have it though...
I've attached it here JIC -- just remove the ".txt" extension and drop it in
Click to expand...
Click to collapse
"Drop it in" where? What folder?
Thanks
AndreCole said:
"Drop it in" where? What folder?
Thanks
Click to expand...
Click to collapse
Second that request!
Put it in /system/etc/permissions/ as android.hardware.touchscreen.multitouch.distinct.xml, and make it readable for all.
But, before you do, make sure that the file doesn't already exist. It does on CyanogenMod 7.0.3.
rajeevvp said:
Put it in /system/etc/permissions/ as android.hardware.touchscreen.multitouch.distinct.xml, and make it readable for all.
But, before you do, make sure that the file doesn't already exist. It does on CyanogenMod 7.0.3.
Click to expand...
Click to collapse
Yeah - went looking and found it. There are two files.
android.hardware.touchscreen.multitouch.distinct.xml
and
android.hardware.touchscreen.multitouch.xml
And a review as text file seems to show the same contents.
This post (12/2010) is unclear on what to do.
Thanks!
Related
Hi,
Whenever I try a game that uses the S2's motion sensor like Glyder or Nova 2, left and right seem to be switched. Maybe its me, but it just feels wrong when you lift the left side of your phone and your view or character goes left as well.
Does anyone know if this is configurable, because it doesn't seem to be an option within the games.
Thank you for any feedback.
Regards,
Karel
Calibrate your sensors (Settings > Display Horzontal/Gyro Calibration) and also check in-game settings?
karel3s said:
Hi,
Whenever I try a game that uses the S2's motion sensor like Glyder or Nova 2, left and right seem to be switched. Maybe its me, but it just feels wrong when you lift the left side of your phone and your view or character goes left as well.
Does anyone know if this is configurable, because it doesn't seem to be an option within the games.
Thank you for any feedback.
Regards,
Karel
Click to expand...
Click to collapse
Get glyder from the market instead of Samsung Apps. The one from Samsung doesn't work properly.
Glyder also does this on my phone. Tried calibrating, assumed it's a game glitch.
Hi,
Thank you all for the tips.
I've actually tried horizontal calibration, but nothing changes.
I'll try downloading the Glyder app from the market instead and see if that makes a difference.
For Nova you can actually set the gyro settings to 270 degrees instead of 90, but then up and down handles a bit awkward.
I'm guessing there is no solution for this yet so I'll wait for someone to release an app for this someday.
Just one of the disadvantages of a brand new phone model
Wow! I thought that was how Glyder was supposed to be ... I actually got pretty good at the controls
Update
Just a quick update to say the market Glyder app is working fine.
My Touchwiz update went fine on my stock unrooted tab. However, the new pan and tilt functionality doesn't work even though I've turned on all the settings and calibrated my tab.
Am I missing something or has anyone else experienced this?
this feature looks kind of.... stupid
For photos in the Gallery and web pages you need to put two fingers on the tablet initiate it's ability to zoom. They show holding it by the bottom corners then touching the screen with your thumbs. It works as show on mine. It can also be turned OFF in settings. Make sure its not OFF if you want to try it.
Ultimately it is a gimmick. Can't see even holding the tablet that way in normal use.
ericyyou said:
this feature looks kind of.... stupid
Click to expand...
Click to collapse
Agreed. For me, pinch to zoom works much better.
I like the ability to move an icon/widget from screen to screen while holding it down and turning tab left/right.
Much better for moving icons.
4dthinker said:
For photos in the Gallery and web pages you need to put two fingers on the tablet initiate it's ability to zoom. They show holding it by the bottom corners then touching the screen with your thumbs. It works as show on mine. It can also be turned OFF in settings. Make sure its not OFF if you want to try it.
Ultimately it is a gimmick. Can't see even holding the tablet that way in normal use.
Click to expand...
Click to collapse
Apparently I'm as stupid as the feature...didn't realize two fingers had to be on the screen. Doh.
walkamongus said:
Apparently I'm as stupid as the feature...didn't realize two fingers had to be on the screen. Doh.
Click to expand...
Click to collapse
Pwned. Lol it shows a demo of how to use it the first time you open the browser.
I got a few "issues"
Why don't swype work everywhere?
Why doesn't facebook sync all pictures on contacts. (Yes I have haxsync, but this one doesnt sync all pictures either)
Where can I get a proper keyboard?
Why does typing on the keyboard auto-highlight, the 2nd proposed word, not the first one?
I can't for the life of me get screenshot with my hand done. Yes its enabled in motion.
Can you change the weather on lockscreen?
My phone gets VERY arm if I use it for a length of time.
Battery usage is very poor. Tips without the obvious turn down screen, turn of 3g/wifi/sync.
Why don't swype work everywhere? skip
Why doesn't facebook sync all pictures on contacts. (Yes I have haxsync, but this one doesnt sync all pictures either) it syncs for me.
Where can I get a proper keyboard?get swiftkey 3. its superb
Why does typing on the keyboard auto-highlight, the 2nd proposed word, not the first one?skip
I can't for the life of me get screenshot with my hand done. Yes its enabled in motion. unclear question
Can you change the weather on lockscreen? you can turn it off or on @ lockscreenoptions in security
My phone gets VERY arm if I use it for a length of time. very common. less hoter than s2
Battery usage is very poor. Tips without the obvious turn down screen, turn of 3g/wifi/sync., better than iphone 4s and s2.
Why don't swype work everywhere?
Click to expand...
Click to collapse
I don't really understand your question. What do you mean by 'not working' and 'everywhere'?
Where can I get a proper keyboard?
Click to expand...
Click to collapse
I prefer Messagease. It takes some time to get used to but it's very fast and accurate even when walking or typing with one hand.
I can't for the life of me get screenshot with my hand done. Yes its enabled in motion.
Click to expand...
Click to collapse
Put your right hand, turned to the side, on the right side of the phone. Then in one quick movement slide it across the screen to the left side. A white line should follow, indicating that the screenshot was taken.
Can you change the weather on lockscreen?
Click to expand...
Click to collapse
Care to elaborate? Mother nature controls the weather so I guess you mean either the weather widget or background image.
My phone gets VERY arm if I use it for a length of time.
Click to expand...
Click to collapse
[not-funny joke]My phone fortunately doesn't grow either arms nor legs.[/joke]
It's normal depending on your usage. It packs a lot of horsepower and high performance equals higher temperature. But as long as it's warm and not hot everything is fine.
Battery usage is very poor. Tips without the obvious turn down screen, turn of 3g/wifi/sync., better than iphone 4s and s2.
Click to expand...
Click to collapse
Depends on your usage scenario. Battery is usually drain by the combination of Sync and 3G. You need to either disable sync or go back to 2G.
The paid app 'Juicedefender beta' can do either of both (or the combination) automatically for you, I let it go back to 2G when not needed. Battery life is roughly doubled with this feature. (Requires root tough)
Note; Most of these questions could've been answered through a forum search individually.
d4fseeker said:
I don't really understand your question. What do you mean by 'not working' and 'everywhere'?
Click to expand...
Click to collapse
Swype is only working when you write messages, not in every other input box you have on the phone.
I'm coming from SG1, and there Swype worked everywhere.
I prefer Messagease. It takes some time to get used to but it's very fast and accurate even when walking or typing with one hand.
Click to expand...
Click to collapse
Thank's Ill check this one, and the one above out. Hopefully they are in Norwegian as well.
Put your right hand, turned to the side, on the right side of the phone. Then in one quick movement slide it across the screen to the left side. A white line should follow, indicating that the screenshot was taken.
Click to expand...
Click to collapse
Yes, I've done all that, watched youtube videos in case I did something wrong. Nothing is happening.
I do manage to do screenshots with buttons however, so I thought maybe there was something I was missing, or maybe the gesture don't work all the time.
Care to elaborate? Mother nature controls the weather so I guess you mean either the weather widget or background image.
Click to expand...
Click to collapse
weather widget. Why am I stuck with acuweather? I want another service, or even swap the widget with another weather widget.
[not-funny joke]My phone fortunately doesn't grow either arms nor legs.[/joke]
It's normal depending on your usage. It packs a lot of horsepower and high performance equals higher temperature. But as long as it's warm and not hot everything is fine.
Click to expand...
Click to collapse
Its so warm its very uncomfortable just holding it. I thought maybe there was something wrong with phone/battery.
Ill compare it to other collegues and see if its only my model.
Depends on your usage scenario. Battery is usually drain by the combination of Sync and 3G. You need to either disable sync or go back to 2G.
The paid app 'Juicedefender beta' can do either of both (or the combination) automatically for you, I let it go back to 2G when not needed. Battery life is roughly doubled with this feature. (Requires root tough)
Click to expand...
Click to collapse
I'lll test a bit with dropping 3G. Have to have sync on though to read work related emails.
I guess I can turn down syncing off contacts and regular gmail.
Note; Most of these questions could've been answered through a forum search individually.
Click to expand...
Click to collapse
noted.
Thanks for bothering to answer anyhow.
Get SwiftKey 3,it's super!
Or swype beta from their website.. Works everywhere.
Press power+home for screenshot.. Keep them hold like 2 seconds.
Download widgetlocker and put whatever widget you want on the lock screen
Get betterbatterystats from xda and check wake locks.
Does it get warm when using 3g data like browsing? Or do you mean gaming?
Sent from my GT-I9300 using xda premium
RagnarIceblood said:
I got a few "issues"
Why does typing on the keyboard auto-highlight, the 2nd proposed word, not the first one?
I can't for the life of me get screenshot with my hand done. Yes its enabled in motion.
My phone gets VERY arm if I use it for a length of time.
Click to expand...
Click to collapse
I've gotten myself a replacement phone now, and this one doesnt get as warm as first one, so there was something wrong with it.
For the first 2 here, I still haven't foudn out how to do this...
This ROM is working very well on my UK Rhod 100. Very stable & fast and since the latest update I have the correct HW keyboard layout. Battery life is limited but carrying a second battery is an easy solution.
The previous problems where the screen would not turn on after several pushes of the power button almost never occurs. However when the battery runs down to about 30% the screen always changes such that a red overlay occurs visible mainly on screens with a white background (see pics). Also when the screen changes ghost images remain from previous screens. Also at this point sometimes the screen will not turn on despite repeated use of the power button. Strangley, even though there is nothing visible on the screen I can unlock the phone by swiping in the expected area (and get haptic feedback) and long press the power button and turn off the device by pressing in the expected areas. Upon a reboot the screen will initially be back to normal but then if the battery is below 30% the problem will return. These issues never occur if the battery is above 30%. If I take screenshots with shootme the pics captured look normal when viewed after a reboot before the problem recurs. Not sure what the system does when the battery falls to this level but the screen is definitely affected. This problem also occurs with a fresh install with no apps installed.
If anyone has any ideas as to what could be the cause (and even better a solution) it would be most welcome. Thanks to all those behind this project.
Sorry you are having troubles. Unfortunately as noted in the first post for that thread we only have RHOD400s to test with. No one else has reported any similar issues. The 100s are known to be the problem children of the RHOD family. If you come up with a fix let us know, and we will try to include it in any future releases.
wizardknight said:
Sorry you are having troubles. Unfortunately as noted in the first post for that thread we only have RHOD400s to test with. No one else has reported any similar issues. The 100s are known to be the problem children of the RHOD family. If you come up with a fix let us know, and we will try to include it in any future releases.
Click to expand...
Click to collapse
Did you look at ACL's work on RE'ing that panel code...?
He said something about the panel power up/power down sequence on the 100's (the AUO panel specifically) to be quite a bit different.
arrrghhh said:
Did you look at ACL's work on RE'ing that panel code...?
He said something about the panel power up/power down sequence on the 100's (the AUO panel specifically) to be quite a bit different.
Click to expand...
Click to collapse
arrrghhh, I noted your post in the ROM development thread regarding the start up sequence in the OMGB kernel for the AUO panel. Perhaps this would solve my issue as well. If this change could be added to the next edition of this ROM my device would be virtually bug free.
As noted in the thread, we do not have any RHOD100s to test with. It is very unlikely that this will happen. If you would like to make your own kernel with these changes I can post it.
issue or not?
hi,
thanks a lot, first of all.
I've been trying to figure out how to get an Italian keyboard layout.
any suggestion?
-p.
paolora999 said:
hi,
thanks a lot, first of all.
I've been trying to figure out how to get an Italian keyboard layout.
any suggestion?
-p.
Click to expand...
Click to collapse
try using AItype Keyboard Plus which supports multiple languages and keyboard layouts
Sorry I didn't express myself properly. I meant the physical keyboard. In other thread I read something about a startup.txt file, I don't know if it applies to this ROM (and moreover I can't find it).
paolora999 said:
Sorry I didn't express myself properly. I meant the physical keyboard. In other thread I read something about a startup.txt file, I don't know if it applies to this ROM (and moreover I can't find it).
Click to expand...
Click to collapse
startup.txt files are only for the SD card versions of the android roms.
You would need to edit the keyboard map. Here is generic android keyboard map info.
There may be apps out there than can change your keyboard map, but I don't know any details about that.
Also in the future it would be best to start your own thread, rather than using an unrelated one. Better yet, post the questions about the rom you are working with in the thread for that rom.
i am having also a screen problem with that Rom and Kernel:
My screen is not calibrated. When i press it's being pressed on somewhere else on the screen.
P.S.
My RAM is not 100 +- this rom showing me 33 for usage on the device :S.
Can someone help me with those two ?
MTN_Cool said:
i am having also a screen problem with that Rom and Kernel:
My screen is not calibrated. When i press it's being pressed on somewhere else on the screen.
P.S.
My RAM is not 100 +- this rom showing me 33 for usage on the device :S.
Can someone help me with those two ?
Click to expand...
Click to collapse
Did you read the link that covered screen calibration listed under related goodies, or did you search for the threads that cover screen calibration under android? Tell us what you have tried, but didn't work.
No idea what you mean by the ram is not 100.
What the heck is going on here? Is this just the thread to jack?
Let's focus on the display issues please folks, as in your response should be related to the original post.
arrrghhh said:
What the heck is going on here? Is this just the thread to jack?
Let's focus on the display issues please folks, as in your response should be related to the original post.
Click to expand...
Click to collapse
idc if they will move my question the the original one...
but i can't fix my calebration points...every time i need to launch the HTC program :\
Problem resolved?
akk29 said:
This ROM is working very well on my UK Rhod 100. Very stable & fast and since the latest update I have the correct HW keyboard layout. Battery life is limited but carrying a second battery is an easy solution.
The previous problems where the screen would not turn on after several pushes of the power button almost never occurs. However when the battery runs down to about 30% the screen always changes such that a red overlay occurs visible mainly on screens with a white background (see pics). Also when the screen changes ghost images remain from previous screens. Also at this point sometimes the screen will not turn on despite repeated use of the power button. Strangley, even though there is nothing visible on the screen I can unlock the phone by swiping in the expected area (and get haptic feedback) and long press the power button and turn off the device by pressing in the expected areas. Upon a reboot the screen will initially be back to normal but then if the battery is below 30% the problem will return. These issues never occur if the battery is above 30%. If I take screenshots with shootme the pics captured look normal when viewed after a reboot before the problem recurs. Not sure what the system does when the battery falls to this level but the screen is definitely affected. This problem also occurs with a fresh install with no apps installed.
If anyone has any ideas as to what could be the cause (and even better a solution) it would be most welcome. Thanks to all those behind this project.
Click to expand...
Click to collapse
In an attempt to bring this thread back on topic I thought I'd report back that the original problem has not happened for a few weeks. My setup is essentially unchanged, the only change is that I have been using One Power Guard to try and improve battery life, which by the way seems to be effective. Managed 13hours with light use (few calls/occassional data for email web browsing)
Anyway it could be coincidence but it is possible that one of the tweaks performed by the app has sorted this issue. Since nobody else has reported the same problem I'm not sure how useful this info is but hopefully it may be of use to someone.
First of all, thanks to @xtermmin for pointing me in the right direction for this.
Steps to increase touch sensitivity and get DTTW functioning better:
Download Shortcut Master Lite
Hit the ellipsis at the top right and click App Explorer (Yes to the error)
Tap anywhere to get the loading circle to go away and find something called Force Touch
In the Force Touch menu, select ZteLCDPressureSettings and hit Launch
Here you will find some options.
Tap Pressure Sensitivity and move the red dot slider all the way to the left where the green "Light" is.
Back out of the menu and you are done.
There are some other things under features that may be of interest as well to some people.
Additionally, there are a couple other items in the Force Touch menu that could play a role in ROMs down the line. The "Press Image" option has a toggle within that item but it does not stick upon backing out and reentering the menu.
If you find anything else of interest, please let everyone know so we can make this the best phone we've ever owned.
Thanks!
Awesome, T2W works better now.... Thanks
P. S. Adding your thread to my all in one place guides.
xgerryx said:
First of all, thanks to @xtermmin for pointing me in the right direction for this.
Steps to increase touch sensitivity and get DTTW functioning better:
Download Shortcut Master Lite
Hit the ellipsis at the top right and click App Explorer (Yes to the error)
Tap anywhere to get the loading circle to go away and find something called Force Touch
In the Force Touch menu, select ZteLCDPressureSettings and hit Launch
Here you will find some options.
Tap Pressure Sensitivity and move the red dot slider all the way to the left where the green "Light" is.
Back out of the menu and you are done.
There are some other things under features that may be of interest as well to some people.
Additionally, there are a couple other items in the Force Touch menu that could play a role in ROMs down the line. The "Press Image" option has a toggle within that item but it does not stick upon backing out and reentering the menu.
If you find anything else of interest, please let everyone know so we can make this the best phone we've ever owned.
Thanks!
Click to expand...
Click to collapse
With the shortcut master i had several loading problems, i used QuickshortcutMaker and this is more easy, Thanks !
xgerryx said:
First of all, thanks to @xtermmin for pointing me in the right direction for this.
Steps to increase touch sensitivity and get DTTW functioning better:
Download Shortcut Master Lite
Hit the ellipsis at the top right and click App Explorer (Yes to the error)
Tap anywhere to get the loading circle to go away and find something called Force Touch
In the Force Touch menu, select ZteLCDPressureSettings and hit Launch
Here you will find some options.
Tap Pressure Sensitivity and move the red dot slider all the way to the left where the green "Light" is.
Back out of the menu and you are done.
There are some other things under features that may be of interest as well to some people.
Additionally, there are a couple other items in the Force Touch menu that could play a role in ROMs down the line. The "Press Image" option has a toggle within that item but it does not stick upon backing out and reentering the menu.
If you find anything else of interest, please let everyone know so we can make this the best phone we've ever owned.
Thanks!
Click to expand...
Click to collapse
This definitely helped! Kinda odd that there is a slight delay from when you double tap and when it actually wakes. I remember the LG G2 responding more quickly with this feature. Also miss the double tap to lock screen too that almost no other phone had (though with nova launcher and an app, you can do this). Regardless, I'm glad the functionality is there.
What's interesting about this little hack is that it clearly is using the force touch settings that will be found in the 6GB RAM model that has a force touch display. Funny how it remains in the ROM anyway, just tucked away since this model doesn't use force touch.
Can I remove the vibration when I use the double tap to wake?
This has made 0 difference for me. I've got a 64gb US variant. I've also noticed double tap to wake stops working when the phone is in Doze. Anyone else have this issue?
Same same with doze, but when my phone isn't deeply asleep this tip indeed increased touch sensitivity.
Sent from my ZTE A2017U
DrakenFX said:
Awesome, T2W works better now.... Thanks
P. S. Adding your thread to my all in one place guides.
Click to expand...
Click to collapse
Did you know this app is also present on the a2017u usa version?
But it is not doing anything...
manu7irl said:
Did you know this app is also present on the a2017u usa version?
But it is not doing anything...
Click to expand...
Click to collapse
I'm using the a2017u LoL always has been.
tolymatev said:
Can I remove the vibration when I use the double tap to wake?
Click to expand...
Click to collapse
Is there a setting to disable the vibration with double tap to wake?
I've tried the mod but don't see any differences for better response for the double tap to wake.
Sent from my iPad Air 2
I don't have anything like force touch in quick shortmaster app or shortcut master lite. I'm on european B03 update... Can anyone confirm this?
kodrnusa said:
I don't have anything like force touch in quick shortmaster app or shortcut master lite. I'm on european B03 update... Can anyone confirm this?
Click to expand...
Click to collapse
It's actually there as been always and with B02 software version.
Do hard reset if not see it
Something get wrong with upgrade in your case.
pklee said:
Is there a setting to disable the vibration with double tap to wake?
Click to expand...
Click to collapse
Don't have vibration with double tap.
How did you get it
paatha13 said:
Don't have vibration with double tap.
How did you get it
Click to expand...
Click to collapse
It's there by default on the US model, at least.
While this definitely improves DT2W functionality, it's still temperamental. I find that now it responds best to very light touches, but harder taps are ignored. If I tweak it to be less sensitive, it does exactly that: it requires a harder touch at all times. Why can't it just respond to a range of touches? My G3 worked just fine in this regard.
rczrider said:
It's there by default on the US model, at least.
While this definitely improves DT2W functionality, it's still temperamental. I find that now it responds best to very light touches, but harder taps are ignored. If I tweak it to be less sensitive, it does exactly that: it requires a harder touch at all times. Why can't it just respond to a range of touches? My G3 worked just fine in this regard.
Click to expand...
Click to collapse
Totally agree with this. It's still very inconsistent, but mine does work if I slam it twice as well as tap it lightly twice. It doesnt always work and it's still delayed. This was sort of a bandaid for a bigger problem though. I hope CM, and ....probably nothing else? at this point...can address it further.
rczrider said:
It's there by default on the US model, at least.
While this definitely improves DT2W functionality, it's still temperamental. I find that now it responds best to very light touches, but harder taps are ignored. If I tweak it to be less sensitive, it does exactly that: it requires a harder touch at all times. Why can't it just respond to a range of touches? My G3 worked just fine in this regard.
Click to expand...
Click to collapse
At EU version I don't see any option for vibration so far.
But totally agree I would like to be more response to a range of touch.
I remember when had LG flex 2 was better implementation than ZTE.
Hope future update improve that.
Sent from my iPad Air 2
paatha13 said:
At EU version I don't see any option for vibration so far.
But totally agree I would like to be more response to a range of touch.
I remember when had LG flex 2 was better implementation than ZTE.
Hope future update improve that.
Click to expand...
Click to collapse
Quite honestly, the Axon 7's story is perpetually: "[insert company here] did a better job of implementing [insert feature here]". There is very little (if anything) that the Axon 7 does better than the big manufacturers, IMO. It does a passable (sometimes even decent) job of most things, though - and at an appreciable discount - which is why I still have mine. It's a budget flagship. It's high-trim Toyota versus a Lexus. Add to that the potential for improvements via software (which is the source of many of my complaints, really), and I think it's a solid buy with quirks I'm willing to live with for a little while as ZTE steps up and makes improvements.
Yep exactly from hardware point is very very capable device but from software although it's pretty good level but there's still staff for many improvements.
Axon 7 is my first Chinese smartphone from Chinese company until now and I'm quite pleased with the all package offering having it 5-6 days,but I would like to see from ZTE much more effort and listening the user base and bring as much improvement and tweaks to the software.
Sent from my iPad Air 2
paatha13 said:
It's actually there as been always and with B02 software version.
Do hard reset if not see it
Something get wrong with upgrade in your case.
I already did factory reset. And then again . No such setting in quickshortmaker. I can post pics.. Weird...
Edit..
Did change language to English and found it ?
Click to expand...
Click to collapse
I notice no difference in the week that I used this tweak. So I just put this settings back. Yup, still no difference to me.
Sent from my ZTE A2017U using Tapatalk