cpu speed - Gen8, Gen9, Gen10 Q&A, Help & Troubleshooting

Please post your Archos device and what CPU frequency your currently running.
( Overclocked or otherwise )
This post is so people can compare there frequencies

For wich purpose? You're just asking people to do something without explaining why.
You'll have no answer doing like this I think.

I dont understand you too but i use:
1ghz - internet surfing, tv shows streaming and hd games.
600 mhz - normal games
300mhz - music

Uhm i don't know why you want to know it but i alway use (if i load up my archos)
1000 mhz. If I'm not at home or not load up my archos i use 300-500 mhz
EDIT: I have an archos 43

alex ainsley said:
Please post your Archos device and what CPU frequency your currently running.
( Overclocked or otherwise )
This post is so people can compare there frequencies
Click to expand...
Click to collapse
for me, I will set 800~1000 when screen on.
200~300 when screen off.

A70IT
300~1000MHz ONDEMAND governor.

Related

are we really running at 624mhz

a quick question. after installing battery status. i notice it also shows the cpu status. currently i am running PK's excellent PK1 rom. the information i get is:
cpu = 312 mhz
battery = between 190mA to 700mA depending on what i turn on.
is this normal??
i thought we are running a 624 mhz rite? so why is it 312 mhz (or half of what the cpu speed)?
thanks for your help!!
It's a known bug in batterystatus, check their website and it's mentioned in the faq.
LOL 312 * 2 = 624 Mhz !!!
it's a dual Core CPU ????
et209 said:
a quick question. after installing battery status. i notice it also shows the cpu status. currently i am running PK's excellent PK1 rom. the information i get is:
cpu = 312 mhz
battery = between 190mA to 700mA depending on what i turn on.
is this normal??
i thought we are running a 624 mhz rite? so why is it 312 mhz (or half of what the cpu speed)?
thanks for your help!!
Click to expand...
Click to collapse
Battery status has a maximum of showing the CPU speed and thats at 312 MHz and when u install it on devices greater then 312 MHz then it will show just 312 MHz !!!! it sfault of the software u are using !!!
ha.i c. thanks for the update. for a moment.. i was raking my mind what happend to the other 312 mhz too.
another comment.. what is the so called "normal" battery consumption? as mentioned, i am running PK's excellent PK1 rom, bluetooth 100% of the time. i use it like a phone.. a little bit of notes writing.. i am getting between 200 - 500 mA. is that normal?
et209 said:
ha.i c. thanks for the update. for a moment.. i was raking my mind what happend to the other 312 mhz too.
another comment.. what is the so called "normal" battery consumption? as mentioned, i am running PK's excellent PK1 rom, bluetooth 100% of the time. i use it like a phone.. a little bit of notes writing.. i am getting between 200 - 500 mA. is that normal?
Click to expand...
Click to collapse
"Normal" is a broad term here. It depends most on the brightness of the LCD and what hw modules you have switched on and used. It also depends on the radio ROM, some of them increase power usage quite dramatically, there are fixes available in PK2 thread if you suspect it's affecting you, although I don't think so at 200mA.
Normal for ME - ie 80% brightness, GPS on, GPRS on, GSM on, GPS software running and reading maps from HD I would expect something floating around 750-1100mA.
With max brightness the Ameo will discharge even when connected to a weak USB power, like some low-amperage car adapters. It did happen to me once.
When you say you have usage of around 200-500mA it means it's rather low, probably most modules inactive (GPS, WiFi, 3G, BT etc.) and brightness in a decent range.
Unfortunately our Athena is rather energy-hungry in real life use. I have to charge her nightly and even sometimes I'm forced to charge from car/laptop when having longer support sessions on RDP+WiFi/3G.
Then again it's just physics and arithmetics, you can't expect such a monster of a screen to run on 1mA. Not as long as you want it lit.
Jack
Mahmood said:
Battery status has a maximum of showing the CPU speed and thats at 312 MHz and when u install it on devices greater then 312 MHz then it will show just 312 MHz !!!! it sfault of the software u are using !!!
Click to expand...
Click to collapse
no actually it's a fault as above person said , ip posted this question in thier thread on this board and got a reply look around their thread as i can't recall the post number at moment.
but I know that it reports 100% correct on my HTC Hermes ( Vario II ) and my HTC Universal ( Mda Pro ) as well as even my really old HTC BlueAngel ( M2000 )
so it's more likely just not supporting the newer chip
edit found post: http://forum.xda-developers.com/show...postcount=3341
cyberjak said:
edit found post: http://forum.xda-developers.com/show...postcount=3341
Click to expand...
Click to collapse
Link not working - I think it's truncated at show... can you post full link please.

Cpu freq.

Ok, I got one question... Is it ok to use max default cpu speed (if I'm not overclocked). 1024... Or should I put a lower amount...
Sorry for my bad English.
Sent from my MT11i using XDA App
As for me, 800 MhZ is enough for comfortable work.
Overclocking is needed only in "Heavy" games.
armando101 said:
Ok, I got one question... Is it ok to use max default cpu speed (if I'm not overclocked). 1024... Or should I put a lower amount...
Sorry for my bad English.
Sent from my MT11i using XDA App
Click to expand...
Click to collapse
1024Mhz is stock speed and yes its safe to use.
If you using your phone only for calling/sms...then 800Mhz is enough.
For calls you can eaven use 600 and if you have your rom rooted you can set the voltage a bit lower.
But from my experience you can easy use the 1 ghz freq and the battery lasts long if you don´t use much your phone.
Neo works fine at 1.4 ghz from performance and battery.
If you use sio i/o and lagfree.
Depending on your CPU you could undervolt it at 1ghz and achieve the same results as it is on 800mhz. But yeah 1ghz is efficient enough just stay away from Live Wallpapers.
i run on stock tweaked perfect battery live on 1024 Mhz
full perfermonce with no problems with antutu cpu master pro
3ig said:
Depending on your CPU you could undervolt it at 1ghz and achieve the same results as it is on 800mhz. But yeah 1ghz is efficient enough just stay away from Live Wallpapers.
Click to expand...
Click to collapse
Even devices with 600-700mhz is browsing web, watching YouTube, have live wallpapers, playing music, record videos......and etc
So why not use our phones too 700mhz
Please guys don't forget...minimum CPU with rooted phones have 122mhz
If they work even so low frequency...why not 600mhz....or up.
Edit. I'm using 122-1300mhz, screenoff 122-567mhz smartass/all frequency voltages lowered -50mV.
Sent from my MT15i using Tapatalk
taaviu said:
Even devices with 600-700mhz is browsing web, watching YouTube, have live wallpapers, playing music, record videos......and etc
So why not use our phones too 700mhz
Please guys don't forget...minimum CPU with rooted phones have 122mhz
If they work even so low frequency...why not 600mhz....or up.
Edit. I'm using 122-1300mhz, screenoff 122-567mhz smartass/all frequency voltages lowered -50mV.
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
thanks bro for the tip to settle it low when screen is off, maybe thaT is more saving battery life, and i hit that button

[Q] Is 800mhz the normal max on a normal rom

just a quick question
Depends on what the phone is doing. Stock can go to 1200mhz if required. By the same token, if the phone only needs 200mhz for a given task, then that's what it will use.
In what context are you asking the question ?
No basically i was checking antutu benchmark and the maximum it said was 800mhz.
was i just looking at the wrong info or is it the max its clocked at? cpu it says is 200 - 800
Default Clock speed for the Galaxy S2 is 200mhz to 1200mhz (1.2Ghz)
In Antutu, if you click on the 'i' on the bottom of the screen and scroll to System Info, it should show CPU Frequency as 200.00 - 1200.00 MHz, unless you have it underclocked.
Also, from what i understand, Antutu aswel as other apps always show the S2 cpu as ARM Cortex-A7 processor, when in actual fact its an ARM Cortex-A9 processor
Have you set a profile in an app that can set the CPU min/max (Voltage Control, Set CPU, etc, etc) ? I use 200-800 as a default profile.
So far as benchmarks/info they provide are concerned, I wouldn't know given I personally think benchmarks are a complete waste of time (and have never run one on my phone).
Essentially, on stock, your CPU should have a 200-1200mhz range, and the CPU speed at a given point in time will vary depending on what the phone is doing as I said in my previous post.
Oh I see thanks to both of you

MiniCM10 Processor Settings

Hello,
I'm writing this thread to know which processor options would be optimal in our minis. The best settings, which give me the best performance/battery, I've found are:
CPU Governor: SMARTASSV2 (Default)
Min Freq: 19MHz
Max Freq: 748MHz
Undervolt: TRUE
I'm also using Apex Launcher. Which settings are you using?
Note: This are just my results, be careful when you change your processor settings.
fuchini said:
Hello,
I'm writing this thread to know which processor options would be optimal in our minis. The best settings, which give me the best performance/battery, I've found are:
CPU Governor: SMARTASSV2 (Default)
Min Freq: 19MHz
Max Freq: 748MHz
Undervolt: TRUE
I'm also using Apex Launcher. Which settings are you using?
Note: This are just my results, be careful when you change your processor settings.
Click to expand...
Click to collapse
Whats the purpose of Undervolting when you have it's max frequency as overclock?
zvdelossantos said:
Whats the purpose of Undervolting when you have it's max frequency as overclock?
Click to expand...
Click to collapse
Because it undervolts on every frequency below 600, and his minimum is 19, so when the phone is idle or doesn't need all of the processing power he saves battery
The SmartAss governor is very good at picking the right frequencies for any given job, so it doesn't allways run on 748Mhz, not even when you're using the phone.
SmG67 said:
because it undervolts on every frequency below 600, and his minimum is 19, so when the phone is idle or doesn't need all of the processing power he saves battery
Click to expand...
Click to collapse
That is the same very purpose of SMARTASSV2 to undervolt your device when idle or on sleepmode and overclocks it when on process. So ticking the undervolt wont affect your device because the one that manage the frequency will be the COUgovernor.
zvdelossantos said:
That is the same very purpose of SMARTASSV2 to undervolt your device when idle or on sleepmode and overclocks it when on process. So ticking the undervolt wont affect your device because the one that manage the frequency will be the COUgovernor.
Click to expand...
Click to collapse
The SmartAss Governor only governs the frequencies, not the voltage that the Processor uses. there is a difference between the speed the cpu runs on (Mhz) and the amount of Electricity (Volts) it gets fed
Say Qualcomm has said it needs 5 volts to run at the stock frequency of 600Mhz, then the processor will always get 5 Volts, no matter which frequency it uses.
Undervolting will feed it less than the 5Volts when the frequencies are lower, SmartAss won't do that, it will run the 19Mhz still on 5Volts.
(Voltages are examples, i don't know the exact values, but I know that running on 122 or less will be stable on less than half of the nominal power)
SmG67 said:
The SmartAss Governor only governs the frequencies, not the voltage that the Processor uses. there is a difference between the speed the cpu runs on (Mhz) and the amount of Electricity (Volts) it gets fed
Say Qualcomm has said it needs 5 volts to run at the stock frequency of 600Mhz, then the processor will always get 5 Volts, no matter which frequency it uses.
Undervolting will feed it less than the 5Volts when the frequencies are lower, SmartAss won't do that, it will run the 19Mhz still on 5Volts.
(Voltages are examples, i don't know the exact values, but I know that running on 122 or less will be stable on less than half of the nominal power)
Click to expand...
Click to collapse
Nice yes yes. good reply. now I know whats the use of undervolting. thanks for the explanation
SmG67 said:
The SmartAss Governor only governs the frequencies, not the voltage that the Processor uses. there is a difference between the speed the cpu runs on (Mhz) and the amount of Electricity (Volts) it gets fed
Say Qualcomm has said it needs 5 volts to run at the stock frequency of 600Mhz, then the processor will always get 5 Volts, no matter which frequency it uses.
Undervolting will feed it less than the 5Volts when the frequencies are lower, SmartAss won't do that, it will run the 19Mhz still on 5Volts.
(Voltages are examples, i don't know the exact values, but I know that running on 122 or less will be stable on less than half of the nominal power)
Click to expand...
Click to collapse
nice to see some piece of truth over here (not perfect, but well explained)
de-noobing is good from time to time
xda is overcrowded of false answers given by people thinking they know but don't
anywhere, at anytime, newbies asking get fake answers from people wanting to help but failing to do so , due to lack of knowledge.
as everyone, i might be one of these, but try not to be.
make sure you know what you are talking about before spreading your (incomplete or false) knowledge
this was my thought of the day
matmutant said:
nice to see some piece of truth over here (not perfect, but well explained)
de-noobing is good from time to time
xda is overcrowded of false answers given by people thinking they know but don't
anywhere, at anytime, newbies asking get fake answers from people wanting to help but failing to do so , due to lack of knowledge.
as everyone, i might be one of these, but try not to be.
make sure you know what you are talking about before spreading your (incomplete or false) knowledge
this was my thought of the day
Click to expand...
Click to collapse
Would you mind to add that to FAQs to avoid false answers?
Tom.K said:
Would you mind to add that to FAQs to avoid false answers?
Click to expand...
Click to collapse
of course i don't
do you mean only the explanation about oc/uv ?
i can add it, note that a while ago i wrote pieces of information about those things
Hey, thanks a lot for all the replies. I had no idea why my settings worked like i wanted.

How To Guide Better battery life and less heat-up

A great way to reduce heat generated on the xperia 1 iii/5 iii also gain bit more battery life.
There was a debate on why the snapdragon 888 heats up and the 2 reasons most told was ''Samsung's manufacturing process'' and that the "GPU was overclocked to 800+ Mhz to excel in benchmark"
I reduced the GPU freq to 491 Mhz, I had top temp 45 Celsius, before it went past 50 Celsius . So in the end reduced a bit of CPU and GPU and got good battery life and way less hot.
First root phone.
Then install
3c cpu manager - Android Apps on Google Play
Enjoy millions of the latest Android apps, games, music, movies, TV, books, magazines & more. Anytime, anywhere, across your devices.
play.google.com
Any settings from this application is temporary, as you restart the phone the frequency are back to default, only change maximum freq nothing else don't change the governors.
My settings:
CPU 1: Max freq = 998 Mhz
CPU 2: Max Freq = 1.2 Mhz
CPU 3: Max Freq = 1.3 Mhz
GPU : Max Freq = 419 Mhz
Try and post the experience and if any improvement (Mention with region model numbers)
:-Since rooted might want to try call recording , great app. Since native sony doesn't support call recording in many regions.
Releases · chenxiaolong/BCR
A Basic Call Recorder for rooted Android devices. Contribute to chenxiaolong/BCR development by creating an account on GitHub.
github.com
Tried your settings but after reboot it doesn't stick it reverts back to original settings
Mangtas_666 said:
Tried your settings but after reboot it doesn't stick it reverts back to original settings
Click to expand...
Click to collapse
Yes it wont stick, untill you flash modified kernel it doesn't stick but if you dont reboot it wont go. Also after setting the frequency, wait for the phone to sleep once then temperature stays to a max and for me the battery life increased, without any performance degrade.
Yeah the issue is there is no modified kernel out there for our device. Kirisakura kernel does not fully support our xperia 1 iii. Sony haven't released their source code.
Try the application and if you dont like to keep the application you can remove it, still it keeps the frequency you set, till you restart the device. Main for heating up in phone is the GPU, as per what i learned, reducing its frequency itself , reduced heat a lot. Try and let know your SOT and heat temperature avg.
Yeah i have EXkernel manager it indeed lessen the heat specially when gaming.
Kirisakura kernel supports our device now..

Categories

Resources