Hey guys I hope that you can help me.
My HTC Sense is DEAD! it tries to load, but it restarts before graphics could appear... so I see just loading indefinitely.
I installed Android on SD (BOYPPC GINGER 2.3.3 V7)... during a boot (not the first one) Android has frozen so I had to remove the battery... and after reboot manila didn't works anymore.
What's happened??? What does Windows mobile if I was starting Android?
Could I Flash just a new Manila?
I don't want to hard reset my mobile
Ive seen this before in relation to sd android (saw it a few times on my own device too, more than once, with different winmo roms and android roms and radios, and eventually gave up on sd android) where after running sd android winmo refuses to boot, and all I could do was hard reset.
Sorry I have no other advice for you.
samsamuel said:
Ive seen this before in relation to sd android (saw it a few times on my own device too, more than once, with different winmo roms and android roms and radios, and eventually gave up on sd android) where after running sd android winmo refuses to boot, and all I could do was hard reset.
Sorry I have no other advice for you.
Click to expand...
Click to collapse
Awww I'm going to hard reset but what is the problem?? why it happens?... I was reflashing just manila but I can't cause I don't have enough memory. It want about 120 Mb and I don't have so much memory
Sorry no idea why.
zenida said:
Hey guys I hope that you can help me.
My HTC Sense is DEAD! it tries to load, but it restarts before graphics could appear... so I see just loading indefinitely.
I installed Android on SD (BOYPPC GINGER 2.3.3 V7)... during a boot (not the first one) Android has frozen so I had to remove the battery... and after reboot manila didn't works anymore.
What's happened??? What does Windows mobile if I was starting Android?
Could I Flash just a new Manila?
I don't want to hard reset my mobile
Click to expand...
Click to collapse
Just a suggestion here but if you run into a problem like this again don't do a battery pull. Take the battery cover off and press the little red. yellow,. or green reset button close to the SD card slot.
This might keep you from having this kind of problem again.
Install CHT scheduler in winmo and do a complete sense backup.
If it happens again you should be able to completely restore Manila.
I also make a point of disabling sense before I boot into android. Improves battery life and you have less chance of a random reboot. IMO
Hope that helps.
Sent from my fingers to your face...
Related
ive been running the energy rom for like two months now everything has been fine. today my phone hangs a little bit so i restart it and it wont boot all they way up!!! what do i do to fix this please help!!!its stuck at the screen right after the screen of the color sparklers.
[email protected] said:
ive been running the energy rom for like two months now everything has been fine. today my phone hangs a little bit so i restart it and it wont boot all they way up!!! what do i do to fix this please help!!!its stuck at the screen right after the screen of the color sparklers.
Click to expand...
Click to collapse
use the proven process of elimination, have you installed something recently?
a Manila Mod, or tweak? I hope you have a backup of everything essential
on your device, as it may that you need to HR
maybe its only a dead sd card..
take out sdcard, sim card and battery for a few minutes and reinsert only the battery and try to boot up...
if this doesnt work, you'll need an hard reset..
so i kept resttiing until it booted up. then i saw these posts and decided to restart the phone and it doesnt work again. so i reset again an pressed the talk button then it went to the launching sense screen. me being a gambler i reset it again and it stalled again until i hit the talk button. now i reset it a couple of more times and its back to loading normal on its own. im only stating everything i did just in case someone else might come across this problem at some time. thanks for you guys quick response and help
Try a full reinstall using the flashaholic app that does a full OS ROM format, also backup any files on the SD card and reformat that too and see what happens.
I should add that the full "task 29" format thing probably wont work well unless you have HSPL installed (otherwise you have to first install a stock ROM, then SSPL install your custom ROM; kind of defeats the point of the full format!)
hey guys i need help i had android on my htc hd2 before but i deleted the folder out of my sd memory card and now i try to root android on my sd card and i have an error it would just boot to the logo HTC i try different rom and im running radio 2.14 could someone help me please i also reformat my sd card many time same thing still happening please help me out
I occasionaly get the same thing when trying a new WM rom. If you don't mind flashing your phone then do a task29 which you can find in some custom ruu programs to completely wipe the phone. then when you want to install the WM rom, unplug from usb, switch off.
Then press and hold volume down key and power button. You will boot into recovery mode. You can then install the fresh WM rom. Once installed copy the android folder back to the root of your SD card and boot up! I know its a long way and that you'll lose all data but it'll get your phone back up and running with any luck.
Mikeanywhere.
kkk imma try that to see if it works
same thing still happening i also try another sd card and im still having the same issue as before
dude, learn to use some punctuation. your post really just becomes blah blah blah
you are booting into windows just fine and booting android is the problem, or you can't get your phone to work at all?
if you're phone don't work, its a big issue that i'm not gonna touch. if its just android that isn't booting, just download a new version and go from there
+1 download a new build or another copy of the one you were using before....
if you dont let a build load properly during the first boot then it can corrupt some files I think.
I could be wrong but Im sure I read that somewhere.......
installed the hspl, updated to the radio rom to 2.14.50.04 and using desirebuild_v 5
starts normally with the dissolved numbers and the penguin guy but then just goes on forever about the battery percentage. just a bunch of numbers and batt: 52%
batt: 51%
ect. for pretty much ever
is there something that ive missed?
chrisman99 said:
installed the hspl, updated to the radio rom to 2.14.50.04 and using desirebuild_v 5
starts normally with the dissolved numbers and the penguin guy but then just goes on forever about the battery percentage. just a bunch of numbers and batt: 52%
batt: 51%
ect. for pretty much ever
is there something that ive missed?
Click to expand...
Click to collapse
Try this:
You seem to have WinMo and a compatible radio.
1. Format your SDCard with FAT32 (backup your data first) (what kind of card do you use? (size and class))
2. Copy your android to your SD card (read the installation guide of the chef, not all Android Builds runs from /Storage Card/Android)
3. Run CLRCAD.exe (or something like this) and then Haret.exe.
4. Be patient, it will take a few minutes at the first boot.
5. if you complete the setup process reboot and then you can do what ever you want
tried that same thing.
just repeats the same 5 lines or something over and over
i have a small question, i successfully booted to android, question is when i need to reboot my phone i cannot lunch android again , can you help me ?
chrisman99 said:
tried that same thing.
just repeats the same 5 lines or something over and over
Click to expand...
Click to collapse
Ok... We try some other things
What HD2 do you have?! 512MB or 1024MB?
Which Radio do you use?
Which Android ROM?
Radio 2.12.50 has a better current cosumption for me. Maybe you try this radio, too
What you need to realise is that when we say "wait a few minutes" we mean up to and including 15... It can seem that the HD2 has frozen but wait long enough and it will boot into android, 1st it has to set up your card the way it likes with a (generally) 1Gb image file. This takes a little while to do.
Patience grasshopper......
Sorry for this not being directly related but it seems like a resonable place to ask my question. So ive flashed tons of winmo roms but just now starting to try android. I flashed nrgz's bare bones rom for android. and the only android that I can get to load is the one that nrgz posted himself a month or to ago. I have tried 3-4 different builds after and it starts linux but only for a second than either goes to an htc screen frozen. or a bright blue screen frozen. Ive tried everything that ive read about. I have reformatted my sd card twice. ive tried 3 different sd cards. ive tried a different roms. Nothing works. I like nrgz andoid ROM that he has with a froyostone build of android but it is VERY unstable and I cant get it to run for more than 10 minutes without freezing and want to try something alittle more stable. ANYBODY know what else i can try. thanks.
sorry i just figured it out. Im AN IDIOT> i thought that i had to see linux run all the way through like with nrgz. but apparently the htc screen is good. MY BAD>
safeburn said:
i have a small question, i successfully booted to android, question is when i need to reboot my phone i cannot lunch android again , can you help me ?
Click to expand...
Click to collapse
Follow my guide and never have to use winmo again.....
http://leoandroid.com/viewtopic.php?f=51&t=182
If you need to boot back into android you need to launch haret.exe. If you press on it and it does nothing then press and hold on it to get some options. If open is not in the options you can either download total commander to open the file or download EBL 2.1 and install it. Both of these apps are winmo apps. I found them online.
it turned out that it was due to the files been in the android folder and not direct onto the sd card which was a bit annoying cos thats originally how i had it before i read somewhere people put it in an android folder so did this to keep it organised.
still have a few errors tho and sleeping and dying so was gonna try the froyostone 3.2. this seriously wont but tho. blue screen straight onto black with green htc and left for ages with no luck. any tips on that one?
also im using rom version 1.66.405.2 if that would cause any issue?
tried froyostone 3.1 and got that to boot but still a bit hit and miss. also when it sleeps for long periods overnight its dies. is this normal or is there anyway to fix it?
AMCJUNGLE said:
Follow my guide and never have to use winmo again.....
http://leoandroid.com/viewtopic.php?f=51&t=182
If you need to boot back into android you need to launch haret.exe. If you press on it and it does nothing then press and hold on it to get some options. If open is not in the options you can either download total commander to open the file or download EBL 2.1 and install it. Both of these apps are winmo apps. I found them online.
Click to expand...
Click to collapse
Thank you very much , i will try this...
different builds seem to just not work for some people....
its all about trial and error.......
i went through about 6 different builds before finding one that 90% stable.....
its this one.....
Ok, so before the general populace of the forum, looks over this post thinking it's some noob who cant read through the forums to solve there own problem, i would like to say thanks in advance to anyone who can seriously provide some help.
Problem is as follows:::
1,)Phone is working fine using mini-winmo+cyan droid
2,) -PROBLEM- My android stops working, so now im stuck using a lite version of winmo
3,) Tried formatting the sdcard with the lite version winmo built in sdcard formatter, doesnt solve anything, dont exactly know what i was trying to solve with this step.
4,) I decide to get a nice fancy version of winmo, figured it would be as easy as just flashing it once n done.
5,)Decided on going with Ozrom, looked the best at the time.
6,) Run the ruucustom as admin, everything goes fine.
7,) -PROBLEM- after flashing the first boot leaves me stuck on the bootscreen.
So after all that i took the advice and tried to get back to the stock Tmous ROM, but as im typing this im still stuck on the Stick together screen, and also just for a control group i downloaded the latest HD2 cell winmo rom release, and that left me hanging on there version of the boot screen.
Same problem, different roms.. stuck on the loading/boot screen.
But, with the stock rom after playing around with removing the battery, simcard,sdcard and what have you i got the stock rom to boot!!!! I was so excited, i skipped the "How to use the on screen keyboard" tut and was typing in my email info when the phone reset on its own and all my hopes went down the drain... hopefully i will get some help on the issue, and like i said previously in the first paragraph i appreciate any and all help.
thanks.
---UPDATE---
Phone is on and working, intermittently.
When i plug the phone into the charger and wait for the amber light, it will boot up and actually enter into windows, now heres the kicker, removing the charger and using the phone will result in the phone turning off and restarting itself, hanging on the stick together screen.
Removing the battery, and replacing the battery after i push all the buttons, the same way you would power cycle a TV remote, and then connecting it to a charger is the only way ive been able to maintain the operation of the device.
Any ideas?
Try doing task29 reinstall winmo Rom of choosing.. see if that helps.. also I flash everything from bootloader. Also check battery pins make sure they aren't bent..
Sent from my Mytouch HD2
Hey guys im new to this so this is my first post as you will be able to see.
Q1..So i have the HTC HD2 and im looking for a WP7 theme that actually works.
Q2..Id also like to be able to play facebook games through this phone but as i live in the UK i cant get skyfire, and help on that ??
Q3.. id love to run android on my phone but my volume down button doesnt work and all the tutorials ive seen require you to hold that button down, and tips on this
Thanks for your help and i apoligise if ive wrongly posted this thread as i said im new to this.
jd85jd said:
Q3.. id love to run android on my phone but my volume down button doesnt work and all the tutorials ive seen require you to hold that button down, and tips on this
Click to expand...
Click to collapse
since you currently have a running winmo 6.5 rom, you could in theory flash hspl, then the radio, and then the magldr flash (in that order) whilst winmo is running, meaning you wouldn't have to use the voldown button to enter bootloader.
BUT BUTBUTBUTBUT, ,
once you flash magldr (or cLK) there will no longer be a winmo rom to flash from, and since the ONLY other way to flash anything, task29, radio, magldr, stock roms, other winmo roms, hspl etcetera, requires teh voldown button, you would be stuck. And what if the magldr flash doesn't take properly? fairly often people find they have to reinstall magldr for one reason or another,, you couldn't, because you couldn't enter bootlaoder.
You would get no second chance, it would be one-shot, all-or-nothing , and i'd lay 50:50 on you ending up with a phone stuck with no rom, and no way to flash one without vol-down.
My advice would be to stay a long way away from flashing and just use haret to run sd card versions of android.
Hi and thanks for your reply, very usful info as if i didnt know that i proberly would of ended up going ahead and flashing my phone sooner or later, now that i know that ill stay away from that end of it.
So how do i go about using haret to run sd card versions of android, and is it just the same as using android but just running it from my SD card.
Thanks for your advice
i did abit of lookin about i think i get the gist of it, just a couple of questions, i only have a 2GB memory card do i need to get a bigger one, and my radio is xx.x51.x is that compatible ? thanks
Sorry i never had any success using sd android, (but it was a good long time ago) so i cant really help., however i know that 2gb will be fine at least till you know what youre doing,
The usual advice really,read as much as you can.
Ok thanks, ive just updated my radio so now running a new version so think im gonna give it a try, thanks again