Question about MLB At Bat streaming (no, not about build.prop) - Nook Color Themes and Apps

I followed jkabaseball's directions to spoof the NC as SCH-I800. Enables the streaming video, which is great. The problem I'm having is that when the stream loads, it doesn't play smoothly. What's weird is that it isn't stuttering as you would normally expect, but rather the video speeds up and then slows down.
Anyone else experienced this? If not and your streaming works fine, can you tell me your setup? Seems to be some kind of performance issue.
I've got Tablet Tweaks with OC at 1.1Ghz.
Thanks.

I sometimes get this for the first 30 seconds - 1 minute, but then it settles down.

I occasionally see what you are seeing, but not always, and it usually clears up.
For me, it seems that I can play the game video for anywhere from 5 to 15 minutes and then the screen turns white. Restarting the app doesn't usually restore it. Even rebooting doesn't seem to help.
Anyone else see this behavior? Does the app just suck or is it my device?
I am in CM7 build 41 and dalingrin's kernel 18C (but saw this behavior with previous cm7 and kernel versions), and my wifi connection is pretty fast and reliable (~16Mb ).

Jayrot said:
I followed jkabaseball's directions to spoof the NC as SCH-I800. Enables the streaming video, which is great. The problem I'm having is that when the stream loads, it doesn't play smoothly. What's weird is that it isn't stuttering as you would normally expect, but rather the video speeds up and then slows down.
Anyone else experienced this? If not and your streaming works fine, can you tell me your setup? Seems to be some kind of performance issue.
I've got Tablet Tweaks with OC at 1.1Ghz.
Thanks.
Click to expand...
Click to collapse
Would you be able to provide the link to jkabaseball's directions? I've been trying to figure out a way to stream MLB at Bat on my Nook. Thanks.

Never mind. Found it.
http://forum.xda-developers.com/showthread.php?p=12732499#post12732499

Disfigured said:
I occasionally see what you are seeing, but not always, and it usually clears up.
For me, it seems that I can play the game video for anywhere from 5 to 15 minutes and then the screen turns white. Restarting the app doesn't usually restore it. Even rebooting doesn't seem to help.
Anyone else see this behavior? Does the app just suck or is it my device?
I am in CM7 build 41 and dalingrin's kernel 18C (but saw this behavior with previous cm7 and kernel versions), and my wifi connection is pretty fast and reliable (~16Mb ).
Click to expand...
Click to collapse
I am in the same boat as you. Sometimes it'll load up right away, sometimes I get 20 white screens before it loads. Doesn't seem to be any rhyme or reason as to when it works.

FWIW, I was able to solve the constant white screen issue.
Background: I had purchased the MLB At Bat app for my HTC Evo, so when I got the NC up and running I just went and downloaded the version in the Market that was already "purchased". This was the version that was getting me the white screen problems.
So, I uninstalled this app and sideloaded a different MLB At Bat .apk that I got from other sources. For whatever reason, this version seems to pull up the stream right away 100% of the time, although the problem I have now is that the video and audio aren't in sync (the video is a full second or two ahead of the audio).
Anyone experienced this? So frustrating!

somebody help, i have a mixture of all that. sometimes just a white screen sometimes fast then stops sometimes plays for like 4 seconds perfectly then goes to white screen with just audio HEEEELLLLLPPPPPPP
EDIT: i installed an older version of flash player and i havent had a problem yet. i attached the version thats been working for me

cheezaliciouz said:
somebody help, i have a mixture of all that. sometimes just a white screen sometimes fast then stops sometimes plays for like 4 seconds perfectly then goes to white screen with just audio HEEEELLLLLPPPPPPP
EDIT: i installed an older version of flash player and i havent had a problem yet. i attached the version thats been working for me
Click to expand...
Click to collapse
Thanks for posting this.
Unfortunately for me, I gave it a try without much luck. Like the other versions, I can watch for several minutes before the video freezes or turns completely white. Don't know how many restarts, wipes, retries until it finally works again.
I hope it's still working for you.

I almost hate to mention it because I'll probably jinx it, but the flash player update (v. 10.3) seems to make this work really well so far tonight.

Not sure if anyone still viewing this thread, but if you download location spoofer, and set your location to mexico (i'm using Cancun) you can view the postseason TV feed, and not just the camera angle version they give you for the postseason.

I too discovered this ability last evening. I put myself in Germany, but none the less it worked well. Too bad I didn't figure this out till the 4th inning of my game.

Related

NetflixOne app... movie doesn't play

I can open and login to Netflix, which is very laggy. I see the list of movies, but when I select a movie (Ironman2 and some old cartoon) it starts to load and just hangs on the red "NetFlix" screen with the loading message. I have 4-5 bars of signal. Any suggestions?
Using NetflixONE
First install of any Netflix
No tweaks to EVO 3D....
Thanks,
Larry
Mine workes fine and its snappy. Then again, I'm using Wifi.
Yeah, I have to try WiFi when I get home. Hopefully that's it. Still, that kind of sucks that I would experience these issues with 4-5 bars!
Either way, thanks for the reply.
Larry
Hmmmmm im using the same but in blue.... Works absolutely perfect... Even over 3G
Sent from my Evo3D
Works for everyone else. So it should work for you. Even if you have full bars... that's just your voice connection. Maybe your data signal is weak. Do you have anything running in the background? Try a SpeedTest.
IN response to ChriChoi...
Hmm, you may be on to something. Ever since I got my phone (June 25) accessing the internet has been slower than when I was using my Hero. For instance, when opening Google, the page would load in decent time but the progress bar would take up to 35 seconds to load! Same with other sites.
As for the Speed Test, here are my results... not sure if this is good or bad
Download = 131kbps
Upload = 128kbps
Ping = 774ms
As for the Netflix apk
- NetFlixONE-HiDef1080p-RedSea-VXXX.apk
I will try the blue version. But I feel it is my data connection or possibly phone.
Update...
It was the "data" connection I had at my office. As soon as I got home and connected my wireless, Netflix worked perfectly. Thanks for all the replies fellas!
Larry

Lose data connection when using Talk

I'm having a problem that has me stumped.
YouTube
Earlier in the week, I noticed that I was unable to stream YouTube videos over mobile data. I could launch YouTube and it would bring up the top videos. I could search and it would get me results. I could not however get anything to actually play, when I choose a video it will just sit at the loading screen, and my bars will turn grey. I will not get a mobile data connection back until I back out of Youtube. I confirmed this issue with several different videos while in different parts of the state, so it isn't limited to a certain video or tower.
Google Talk
If I am at the main screen that shows who is online/offline, usually this will display properly. However as soon as I pick a name and go to send a message, my bars will turn grey and I will lose my data connection. It will not come back until I back out of Talk. Sometimes after this happens I can reopen talk and it will sit at the main screen for a while, get mobile data back, and display who is online and who is not. Most of the time, Talk will not work again until I force close it.
Edit: Talk will not disconnect until I actually send a message. The message makes it through most of the time, but then I lose mobile data. This results in Talk saying "Lost connection to Server. Messages will be sent when online."
I am on CM7 Nightly 20 with the stock CM7 kernel since the day Nightly 20 was released. Just to be safe, I did a full wipe in Fastboot erasing the following partitions before re-flashing: userdata, cache, webtop, system, boot.
I am unsure when this problem started. I know that YouTube worked last weeks, but when I think back, I can't remember the last time Google Talk worked while I was on mobile data. Note though, that while on Wifi everything works just fine.
I'm at wit's end here. I'm going to wipe the phone again and install stable Ba2tF and just Google Apps, and see what happens (after I flashed Nightly 20 earlier today I had the Market start spam reinstalling my apps before testing Google Talk - though I did get to test it and have it lose data after just a few apps were installed).
I'm on 30P for the radio, AT&T, Western Massachusetts, any help would be greatly appreciated!!!
I was going to post the same exact problem. The problem only appears over cellular. Over WiFi, everything works fine. Also, I just reflashed stock and it works. So it would seem to be a problem with CM7 and/or AT&T.
I'm going to get a good logcat of what's going on after I narrow it down a bit more... my current log is 1MB, which as about 2 minutes of info. I'm going to try to narrow it down to just the few seconds from when I hit "send" to when I get disconnected.
Hopefully at that point someone smarter than I can figure out what's going on.
DK
DeathKoil said:
I'm going to get a good logcat of what's going on after I narrow it down a bit more... my current log is 1MB, which as about 2 minutes of info. I'm going to try to narrow it down to just the few seconds from when I hit "send" to when I get disconnected.
Hopefully at that point someone smarter than I can figure out what's going on.
DK
Click to expand...
Click to collapse
Just thought I'd chime in and give some feedback. Tested this out on Weekly #2 both with wi-fi and regular data and everything was working as it should. I've been through a few different versions of CM7 and have not run into this.
Have you been using the same gtalk .zip each time? Maybe try re-downloading it along with your fresh install? Also, have you re-flashed your radio?
And here is a logcat capture. I force closed Talk, started the capture, launched talk, connected, pressed on my roommate's name, and lost my connection. The part that says "<SNIP>" is where my email address was.
I'm going to upload it here, then start to go over it myself.
DK
ghost_og said:
Have you been using the same gtalk .zip each time? Maybe try re-downloading it along with your fresh install? Also, have you re-flashed your radio?
Click to expand...
Click to collapse
Yeah, the GAPPS package ROM Manager lists as newest is still 20110828, which is also listed as newest on the Cyanogen Wiki. I never re-downloaded it, I've always used the same .zip everytime I've needed it... which is since Pre-Beta1.
I didn't flash my radio up to 36P when it came out since some people reported issues with it, and 30P had been working fine for me since June/July.
I am going to try to re-flash Google Apps now, this time without using the new version of talk that supports the front facing camera... since I never used the functionality anyway. I will report back in a few minutes.
DK
I tried reflashing both AT&T radios and both versions of Talk (w/ and w/o video chat).
For me, I get disconnected as soon as I open Talk. Happens every time. I froze Talk and I was disconnected when I got a Gmail notification. Maybe it was a coincidence but either way I was disconnected so the problem isn't limited to Talk. Maybe it's a problem with the Google Services Framework.
Here is what I think is a better logcat of what happens. This time, I setup CM7 to have long press back kill the currently active process, so that I could kill Talk right away.
I started the logcat from killing Talk and hitting the home button while it was restarted. I sent one message that said "Son" to my roommate, and lost my data connection. I then waited 20-30 seconds, killed Talk, it restarted, I got data back, I sent another message to my roommate that said "disconnect", and I lost my data again.
NOTE: This is with the Talk from the newest GAPPS (fresh download with ROM Manager), but not the one with the camera support (camera crap was cluttering the logcat anyway).
Anyone who is smarter than I able to see what's going on here?
DK
Same problem with CM7 Beta so I'm guessing there's some problem between CM7 and AT&T. I'm on AT&T in NYC.
I have a list of ROMs this does NOT happen on. I went back and restored to several points trying to figure out exactly where the problem started, and while I didn't find that, I do have a list that it does and does not happen to.
Talk Works on:
Prebeta2
Prebeta3
Prebeta4
Stopgap
Ba2tF
Weekly1
Nightly8 (likely it works on Nightlies 1-8, I just never made a backup after that and went right to 20 so I dont know exactly where the issue started with nightlies)
Talk does NOT work in:
Weekly3
Nightly20
So at some point between Nightly9 and Nightly20 (which includes the commits for Weekly3), something happened with Talk that is causing it to drop your data connection when you send message or refresh the friend list.
If any Dev happen to stumble upon this thread, I did take a logcat dump and linked it above as a txt file called "betterlog.txt" which clearly shows two disconnects while using Talk without having a lot of other "noise" in the logs from other things happening on the phone.
DK
Same problem, only I have this in Ba2tF. Odd thing is, I was running Ba2tf for some time, then all of a sudden this issue just appeared. I couldn't get it to clear, even after wiping data, caches, re-flashing etc...
Looks like this is nothing new. Check out CyanogenMod issue 3557.
---------- Post added at 02:52 AM ---------- Previous post was at 02:38 AM ----------
Same problem in Ba2tF. I was running Ba2tF for several weeks, then this problem just popped up. Couldn't get it to clear.
Looks like an old CyanogenMod issue. Issue #3557.
I don't know if it's AT&T that changed or CM7 but the problem's gone since I started using weekly #4.

[cm7] internal build issues to date

I've been playing around with cm7 since release, internal build so I haven't run into the brick problem, but I have noticed a couple issues that I never had with a plain 1.4.0 rooted nook tablet.
First, I am losing wifi connectivity when I let the tablet sleep for more than a few minutes. Wifi will remain on, but just scans indefinitely while finding no networks. Sometimes I have to toggle wifi off and on several times before it starts working again. I have never had it lose connectivity while it was active and doing something, only when I set it down for several minutes and then wake it up.
Secondly the youtube app has locked up my tablet requiring a reboot several times. Sometimes this happens on the first video played, sometimes I can get up to 4 or 5 before the screen just goes black and all input is ignored. I would have left this info on the alpha release thread, but I can't post there yet and wanted to pass this info along. I'm having a great time fooling around with it, and so far these are the only issues I've noticed.
I haven't had the wi-fi isses that I've noticed. Only things I've ran into are those already being discussed in the dev forum - the near-brick experience and larger apps not installing.
In spite of almost bricking, I've still been using the alpha over the last couple days and am definitely loving the freedom and speed over stock. Can't wait to see how awesome it becomes with further development.
The wifi issue can be fixed by adjusting the settings. You just need to turn off wifi sleep. I think this is a long time cm7 bug and not unique to this build. I have reverted to stock for now so I can't guide you through it, but I am pretty sure it's an easy adjustment. (I couldn't go without hulu while in the middle of watching a series.)
StridAst said:
The wifi issue can be fixed by adjusting the settings. You just need to turn off wifi sleep. I think this is a long time cm7 bug and not unique to this build. I have reverted to stock for now so I can't guide you through it, but I am pretty sure it's an easy adjustment. (I couldn't go without hulu while in the middle of watching a series.)
Click to expand...
Click to collapse
Yep, you just go to Settings -> Wireless & Networks -> WiFi Settings then press the menu button. This brings up a small menu bar with two options. Tap "Advanced" and you can change your wifi sleep policy there.
imsoenthused said:
I've been playing around with cm7 since release, internal build so I haven't run into the brick problem
Click to expand...
Click to collapse
I believe the brick issue is in both the internal and SD release. Be sure to stay away from that SD card format button.
RadicalAns said:
I believe the brick issue is in both the internal and SD release. Be sure to stay away from that SD card format button.
Click to expand...
Click to collapse
Yeah, I'm not sure where the misconception that it's the SD-Card version causing the problem, unless it's just confusion because the problem was cause by an SDCard Format....I think the issue occurs in either, and I know for sure the internal is succeptible to it, because mine is internal and I was an early-bricker.
Ok, my fault for not being clear I guess. I have no conceivable reason to format an sd-card from within the cm7 alpha release so I have continued using it. Turning wifi to always on seems to have fixed my wifi issues, with a negative impact on battery life.
Youtube is still crashing my NT with regularity but that probably has something to do with the generally bad video performance.
imsoenthused said:
Ok, my fault for not being clear I guess. I have no conceivable reason to format an sd-card from within the cm7 alpha release so I have continued using it. Turning wifi to always on seems to have fixed my wifi issues, with a negative impact on battery life.
Youtube is still crashing my NT with regularity but that probably has something to do with the generally bad video performance.
Click to expand...
Click to collapse
Yeah, Celtic and Gonce are working on fixing the video drivers. Right now they're a bit iffy.
-Unable to install some .apks and some apps from the market.
-Color is weird in some games (like blue instead of green)
-B&N Nook app not syncing or not working at all.
I have not used Netflix on it yet so I'm not sure of the quality for that or youtube. I have no need to wipe SD card so will continue to explore any bugs.
youtube
imsoenthused said:
I've been playing around with cm7 since release, internal build so I haven't run into the brick problem, but I have noticed a couple issues that I never had with a plain 1.4.0 rooted nook tablet.
First, I am losing wifi connectivity when I let the tablet sleep for more than a few minutes. Wifi will remain on, but just scans indefinitely while finding no networks. Sometimes I have to toggle wifi off and on several times before it starts working again. I have never had it lose connectivity while it was active and doing something, only when I set it down for several minutes and then wake it up.
Secondly the youtube app has locked up my tablet requiring a reboot several times. Sometimes this happens on the first video played, sometimes I can get up to 4 or 5 before the screen just goes black and all input is ignored. I would have left this info on the alpha release thread, but I can't post there yet and wanted to pass this info along. I'm having a great time fooling around with it, and so far these are the only issues I've noticed.
Click to expand...
Click to collapse
I had problems with youtube too ... dolphin browser HD crashed when I clicked on a youtube link . Similar wi-fi problem too . Also the Wi-Fi indicator icon in status bar shows 1 or 2 bars after 10 min of active connection ....
Pretty stable otherwise . btw anyone tried 1080p mp4 videos in HW mode ???
Can someone please send me the internal build zip please
Sent from my BNTV250 using xda premium
CM7 beta bug report
Hello, I can't post to the development forum yet, but I thought the devs working on the next CM7 release for the NT should know about a potential bug. Also, I've only began using an android device about a month ago, so please forgive any noobish remarks. If after reading this, someone thinks it's important for the upcoming CM7 build release, please let someone on the development team know. Thanks.
I've been using an internal install of the beta build since it was released yesterday morning.
Everything has been working, very well, and I haven't been attempting to format sd cards from the device.
I've had one crash of ADW launcher when trying to add a playlist through the music player widget. I had a minor wifi hiccup that required toggling the wifi on and off to resolve. And a crash of the notification bar, when I attempted to click on an email notification message, which resolved by itself, seconds later.
The bug I'm most concerned about happened just about an hour ago. I noticed the battery getting low, so i plugged it in, powered on. It started charging, so i left it alone, a little while later, I looked at it, and the "n" on the charger had changed from orange to green, indicating a full charge. I awoke the nook from sleep to find that it was no longer charging, but that the battery was only about half charged. I unplugged it, and plugged it back in, but the status light was orange for only a second, before changing back to green, and no more charging.
I powered it off, and plugged it it (which of course made it turn back on /facepalm), but then powered it down through the power console as soon as CM7 booted. I has been powered off, and as far as i can tell charging normally, as indicated by the orange status of the charger's indicator. I intend to leave it powered off, and charging, until such time as the charging indicator turns green.
There may be some information here that is valuable to the Developers and you have attempted to articulate everything well.
However, is there some reason you chose to create a new thread instead of posting your issue In This One?
Perhaps the moderators can combine these threads but I'm sure the developers are more apt to look in one thread then trying to chase down multiple ones.
Good luck with your issues.
Aw crud. Totally didn't see that thread. If a mod could please combine, it would be appreciated.
Maybe the bug thread should be stickied?
Sent from my SAMSUNG-SGH-I997 using Tapatalk
daedricgeek said:
I had problems with youtube too ... dolphin browser HD crashed when I clicked on a youtube link . Similar wi-fi problem too . Also the Wi-Fi indicator icon in status bar shows 1 or 2 bars after 10 min of active connection ....
Pretty stable otherwise . btw anyone tried 1080p mp4 videos in HW mode ???
Click to expand...
Click to collapse
I've been having crashing/force closes trying to stream video from sites like youtube.....but with a more mature content....if you know what I mean.
If I'm being too obscure....basically I can't stream porn onto it. Which, imo, is a device-killing bug!
(not really)
On the plus side, it seems like it charges pretty well through a USB connection now, where, if I'm not mistaken, it would not do so on stock. Although I only had stock for like 3 hours before zerging it, so I can't compare it very well....
I was also sitting up waiting on the release of this and have been running it every since then. the only real bugs I have seen is the unable to install alot of apps from the market as it gives the cant write to sdcard which is documented in the dev forums. my wireless does not seem to drain my battery much at all but the device itself never wanted to go into sleep mode unless I forced it into sleep. I changed the screen timeout and changed it right back and the issue resolved itself. Wireless does commonly go from full signal to 2 bars though but even when at 2 bars the connection seems fine and no loss of speed. as far as apps over 20 meg. the only ones I tried I had the apk file stored on my sd card and installed from there and they all installed just fine.
the device seems way more responsive now and I am absolutely loving it although i do miss the nook reader app itself and the one I downloaded from the market gives ab internal error : exception executing the command when I try and sign in Cant wait for the next release alpha or beta I would love to test it.
nocmadman said:
the device seems way more responsive now and I am absolutely loving it although i do miss the nook reader app itself and the one I downloaded from the market gives ab internal error : exception executing the command when I try and sign in Cant wait for the next release alpha or beta I would love to test it.
Click to expand...
Click to collapse
Go to the "Nook" folder on your sd card, then delete it. then try to sign in on the nook reader. This has worked for others who now have the nook app up and running on cm7
StridAst said:
Go to the "Nook" folder on your sd card, then delete it. then try to sign in on the nook reader. This has worked for others who now have the nook app up and running on cm7
Click to expand...
Click to collapse
Deleted nook folder tested same issue. Uninstalled the app and re installed it and now working thank you so much.
joecareytm said:
-Unable to install some .apks and some apps from the market.
-Color is weird in some games (like blue instead of green)
-B&N Nook app not syncing or not working at all.
I have not used Netflix on it yet so I'm not sure of the quality for that or youtube. I have no need to wipe SD card so will continue to explore any bugs.
Click to expand...
Click to collapse
Mostly I'm seeing the occasional app not installing. Every time it has been because "sdcard is not mounted". Even though it obviously it mounted. Aldiko reader is my current villain in this regard. No Wireless problems, but I changed the advanced settings right away. Interface is nice and fast.
Does anyone have any problems with installing games like need for speed
Sent from my PG86100 using xda premium

Does YouTube suck for anyone else?

This is just frustrating. Even with a strong wi-fi signal (2 feet from router) it's buffering every two seconds. I can't even pause it and let it build up.
I tried clearing the cache and even the app date but that didn't work.
Attempting to watch YouTube on browsers (Firefox and Dolphin) don't work either, it crashes the browsers every time.
The only way I can watch YouTube really is via remote desktop to my Windows 7 machine.
Anyone else facing this issue?
I dokn't have that issue 20-30 feet away. If I ever had that, I reset my router and discover it was my router's fault.
The one annoying thing is trying to use YT with the keyboard and having to back out to the initial main screen to type in the search field...
Sent from my myTouch 4G Slide using xda premium
Ya man i find that i have to be getting atleast 8mb down for youtube to play without buffering. Which isnt good considering the WiFi problems. I also hate how it has to reload the video if you leave the app!
Sent from my Transformer Prime TF201 using XDA Premium HD app
I can watch anything on my HTC Sensation (custom JB ROM) no problem from the same spot. But on the TF201, it's just b*ll****. So it's not the router. I can't figure out the problem.
Do you have Bluetooth on? As in have a Bluetooth device paired?
rosshalz said:
Do you have Bluetooth on? As in have a Bluetooth device paired?
Click to expand...
Click to collapse
Nope, never have bt on.
I figure out a way to watch now. It's using Firefox and switching the user agent to "iPad". :/
?
You shouldn't have to do that.. I've never had any problems using youtube. Are you on a custom rom or kernel and what one are u using?
Darkmatter2420 said:
You shouldn't have to do that.. I've never had any problems using youtube. Are you on a custom rom or kernel and what one are u using?
Click to expand...
Click to collapse
It's working fine for me now. I guess JB with a factory reset did the trick.
My guess is that it's probably a hardware problem. ASUS has never been a symbol of consistency with their products :S
wifesabitch said:
This is just frustrating. Even with a strong wi-fi signal (2 feet from router) it's buffering every two seconds. I can't even pause it and let it build up.
I tried clearing the cache and even the app date but that didn't work.
Attempting to watch YouTube on browsers (Firefox and Dolphin) don't work either, it crashes the browsers every time.
The only way I can watch YouTube really is via remote desktop to my Windows 7 machine.
Anyone else facing this issue?
Click to expand...
Click to collapse
I am using the YouTube app , no problem for me..
Here is running just great.. No problem at all!!!
It's perfect for me, just like on my desktop. Some update must have fixed it.
And I don't use the YouTube app, I disabled that, I just use it on Firefox like I normally would.

[Q] Media player and TCPMP stutter every 5 seconds...

Hi,
I have got a strange problem.
I am running Winmo 6.5 with an Energy ROM.
When i am using Media Player or TCPMP to play music in the background the playback interrupts itself every 5 seconds for about 100 mS and resumes... I had it on playing IP radio, but got it on playing MP3 as well.
Has someone experienced it as well?
What could have been the cause?
The cure?
Thank you.
Laszlo
have you activated the animated arrows on the lockscreen? Doing that causes music to stutter every few seconds when the screen is locked.
Thank you for the fast answer, Frankly I don't know.
Hmm where should that be activated?
it can't be done within the rom, its not a setting,, if you had activated them, you'd know about it. (I'm not avoiding telling you, lol, its just a long process, and since it doesn't work properly that's why htc left it turned off.)
samsamuel said:
it can't be done within the rom, its not a setting,, if you had activated them, you'd know about it. (I'm not avoiding telling you, lol, its just a long process, and since it doesn't work properly that's why htc left it turned off.)
Click to expand...
Click to collapse
Anyhow I have just completely disabled the lockscreen in the B&B tweaks and it does not stutter any more.
Thank you!
TCPMP stops after exactly 6 minutes.
rin67630 said:
Anyhow I have just completely disabled the lockscreen in the B&B tweaks and it does not stutter any more.
Thank you!
Click to expand...
Click to collapse
disabling the lockscreen fixed the stutter every 5 seconds, I am happy with that now...
Insider knowlege is great.
However upon listening to IP radio, TCPMP stops playing after exactly 6 minutes every time...?
It should be related to somewhat disabling networking upon inactivity, but ... where?
Who knows?
Thank you
rin67630 said:
disabling the lockscreen fixed the stutter every 5 seconds, I am happy with that now...
Insider knowlege is great.
However upon listening to IP radio, TCPMP stops playing after exactly 6 minutes every time...?
It should be related to somewhat disabling networking upon inactivity, but ... where?
Who knows?
Thank you
Click to expand...
Click to collapse
since my question didn't get an answer and after a lot of try an error I finally found what made my TCPMP stop after 6 minutes!
In Tools --> Advanced Config --> Data connection --> GPRS disconnect
one should change "Enable button and timer" to "Enable button".
Surprisingly this influences GPRS, but also UMTS and WiFi as well!
After that change no more stops after 6 minutes streaming.
Hope it could help someone else...
P.S: use with care in a metered data plan!
regards
RIN67630

Categories

Resources