Instructions
- Download the ED01 Update
- Rename is “update.zip”
- Place it on your SD card
- Power off your Device
- Boot into “Recovery Mode”
- Run “Apply sdcard:update.zip”
Congratulations, you are now on Android 2.2.1!
youdaman!
Now we just need to debloat it
Ya, will probably check it out once its debloated.
pntballer505 said:
Ya, will probably check it out once its debloated.
Click to expand...
Click to collapse
I'm sure Adrynaline is on the case right now
Mirror: http://filevo.com/pvoy6q2ou8uy.html
Can someone post the odin file for ED01 when you get a chance. Not a demand, but a simple request when you get a chance.
Can someone pull the new Browser.apk out of this please?
RacerXFD said:
Can someone post the odin file for ED01 when you get a chance. Not a demand, but a simple request when you get a chance.
Click to expand...
Click to collapse
Patience is virtue
Will this reset/delete all data for a stock 2.1 fascinate
Sent from my SCH-I500 using XDA App
bigmike88 said:
Will this reset/delete all data for a stock 2.1 fascinate
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Nope! It will keep your data
I have voodoo do I need to disable it? Do I delete the update.zip on sd already? Thanks for any help
Sent from my SCH-I500 using XDA Premium App
Error while updating.
I'm getting a assert failed : file_getprop("/system/build.prop" CH-I500/SCH-I500:2.1-update1/ECLAIR/EA28:user/release-keys" || file_getprop("/system/build.prop". "ro.build.fingerprint") == "verizon/SCH-I500/SCH-I500/SCH-I500:2.2.1/FROYO/ED01:user/release-keys"
E:Error in /sdcard/update.zip
(status 7)
Installaton aborted.
jatilq said:
I'm getting a assert failed : file_getprop("/system/build.prop" CH-I500/SCH-I500:2.1-update1/ECLAIR/EA28:user/release-keys" || file_getprop("/system/build.prop". "ro.build.fingerprint") == "verizon/SCH-I500/SCH-I500/SCH-I500:2.2.1/FROYO/ED01:user/release-keys"
E:Error in /sdcard/update.zip
(status 7)
Installaton aborted.
Click to expand...
Click to collapse
Same. And I know my system is on EA28......
You need to be on stock EA28, and you need to make sure it is update.zip not update.zip.zip
StDevious said:
youdaman!
Now we just need to debloat it
Click to expand...
Click to collapse
Correct me if I'm wrong, but I believe it has been stated about a million times that this is the same build as EC01 which has been released by Adryn—he has debloated and debinged it.
I also couldn't update from downloading from the thread. OTA went fine. Data is all there, but home screens all [email protected]#ed up. I don't remember what icons I had out there, damn it.
Will this work if i have removed a few pre installed apps like CityID, VZ Naz and Skype. these all shipped with the device but i have removed them.
I tried the OTA update and it failed.
Here's a question I've hot for everyone..
My girlfriends fascinate is stock...but hasn't been able to upgrade...she's still on dh12!! We search update and te di01 or w.e appears but always fails with some ip error or something?
I downloaded the official ed01 zip and put on her sdcard and booted into stock recovery...updated.zip.. and that failed....
Ideas?
Sent from my SCH-I500 using Tapatalk
Are you making sure that wi-fi is turned off prior to checking for an update? It will not working on older eclair versions if wi-fi is on.
the update turns off the wifi when its downloding the update, are you saying i should manually turn it off and then get the update?
Related
This update came out 3 days ago, myself and about 3 other people i know with the same Verizon LTE Galaxy Tab SCH-I905 all had this update fail. It downloads fine and then reboots only to have it quickly fail and show the Android guy next to a triangle with a ! in it. My tablet is rooted and has the latest LTE kernel by pershoot (which is excellent by the way). Has anyone else had this problem? I have heard a bunch of ideas, some of them are that it is trying to update verizon bloatware that has been deleted possibly? Any ideas or work around would be greatly appreciated.
Thanks
I think you're expert in Galaxy tab 4G LTE...
Can I unlock this device to use by another carrier?(out side U.S)
Can I use 3G sim or 3G network on it?
I'm waiting your answer dude...
alsatea said:
I think you're expert in Galaxy tab 4G LTE...
Can I unlock this device to use by another carrier?(out side U.S)
Can I use 3G sim or 3G network on it?
I'm waiting your answer dude...
Click to expand...
Click to collapse
Huh? Dude this has absolutely nothing to do with my question at all. And im sure you could find this answer elsewhere. My answer though is no, it cannot be unlocked or work on another carrier, it is carrier specific. Now back to the question I asked..... If anyone knows I would be very grateful. On a side note does anyone know where the OTA updates get downloaded to before they are installed? Is there a temp or cache directly i can pull it from?
punkydudey101 said:
This update came out 3 days ago, myself and about 3 other people i know with the same Verizon LTE Galaxy Tab SCH-I905 all had this update fail. It downloads fine and then reboots only to have it quickly fail and show the Android guy next to a triangle with a ! in it. My tablet is rooted and has the latest LTE kernel by pershoot (which is excellent by the way). Has anyone else had this problem? I have heard a bunch of ideas, some of them are that it is trying to update verizon bloatware that has been deleted possibly? Any ideas or work around would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
I'm having the exact same problem you are, I wish I knew the answer. You said you're using the latest kernel from pershoot for the LTE tab????? Do you have a link for it, I can't find it anywhere. TIA
Ya the problem is very frusterating, are you just rooted with no after market kernel? Here is the link the Pershoots kernel, works great!
http://droidbasement.com/galaxy/ker...cm_2636.4_lte-oc-xtra-vfpv3-d16_fp-091311.zip
Any way that you can go back to stock kernel. I have my LTE rooted, but the only thing I've done is the Netflix "patch". I got the EH04 update 2 days ago and it updated without any problems.
I'm assuming the reason why this update fails for everyone is because you are all using CWM, and not the stock recovery. The update needs to have the stock recovery in order to successfully install.
emplox said:
I'm assuming the reason why this update fails for everyone is because you are all using CWM, and not the stock recovery. The update needs to have the stock recovery in order to successfully install.
Click to expand...
Click to collapse
I've been trying to get back to stock since the update failed. I've tried everything I could find online. I'm using a Verizon Galaxy 10.1 same as the original poster with the same exact setup. I found and tried this
http://forum.xda-developers.com/showthread.php?p=12864252#post12864252
by lexriley but no go. I get errors.
If someone could provide a link in the right direction to return to stock recovery or a workaround to get this EH04 patch installed we would all be grateful. Thanks!
emplox said:
I'm assuming the reason why this update fails for everyone is because you are all using CWM, and not the stock recovery. The update needs to have the stock recovery in order to successfully install.
Click to expand...
Click to collapse
Emplox I think you may be right! Thinking about it, it does make complete sense what you are saying. Yes im using CWM. So any ideas how to get rid of it temporarily and get the stock recovery on their so I can get the update?
Thanks again!
jpstiehl said:
I've been trying to get back to stock since the update failed. I've tried everything I could find online. I'm using a Verizon Galaxy 10.1 same as the original poster with the same exact setup. I found and tried this
http://forum.xda-developers.com/showthread.php?p=12864252#post12864252
by lexriley but no go. I get errors.
If someone could provide a link in the right direction to return to stock recovery or a workaround to get this EH04 patch installed we would all be grateful. Thanks!
Click to expand...
Click to collapse
I'm too
I get stock recovery for 4g lte from here http://forum.xda-developers.com/showthread.php?p=16804945#post16804945 ,unroot my lte device with adb command,do wipe data/factory reset,but it still error when i update to eh04.Error i have :
assert failed : apply_patch_check("emmc:/dev/block/mmcblk0p3:4050944.....)
Error in /tmp/sideload/package.zip (status 7)
Can someone help me fix this ? Thanks
Sr for my english
---------- Post added at 10:58 PM ---------- Previous post was at 10:22 PM ----------
eXiled Killah said:
Any way that you can go back to stock kernel. I have my LTE rooted, but the only thing I've done is the Netflix "patch". I got the EH04 update 2 days ago and it updated without any problems.
Click to expand...
Click to collapse
May you backup your recovery mode,kernel and upload for me?Thanks
I did a little looking around. I have a rooted 4G LTE but with the stock ROM.
My update was in /cache and was called 86bb1913cfe9.update.bin. It's a zip file so you can pull it with adb, rename it, then unzip it. The update script looks like it's verifying each file plus the recovery plus the boot to make sure they are the original files. It updates the radio, then patches each file (not just replacing with new versions.) It also deletes some files (that shouldn't have been included in the retail build?), and adds a few new ones. Then it updates recovery and boot.
Here's the first part:
Code:
mount("ext4", "EMMC", "/dev/block/mmcblk0p4", "/system");
assert(file_getprop("/system/build.prop", "ro.build.fingerprint") == "samsung/SCH-I905/SCH-I905:3.1/HMJ37/EG01:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "samsung/SCH-I905/SCH-I905:3.1/HMJ37/EH04:user/release-keys");
assert(getprop("ro.product.device") == "SCH-I905" ||
getprop("ro.build.product") == "SCH-I905");
ui_print("Verifying current system...");
show_progress(0.100000, 0);
assert(apply_patch_check("/system/app/AngryGPS.apk", "f83190da0a30b15b3652b84dbffcde99bbdb6dd9", "61b30e6f16feb44aa454f451ce7a998300a1df40"));
set_progress(0.000347);
assert(apply_patch_check("/system/app/AngryGPS.odex", "5225f46ea76215434812deca94de5404370ea2d0", "6ea9c477c5ac7d78076a5b14193d7e8f2a91cc29"));
set_progress(0.000865);
Here's the first part of the update part:
Code:
show_progress(0.800000, 0);
ui_print("Updating CP Modem...");
assert(package_extract_file("modem_delta.bin", "/tmp/modem_delta.bin"),
p4lte_update_cdma_bp("/tmp/modem_delta.bin", "modem_delta.bin"),
delete("/tmp/modem_delta.bin"));
set_progress(0.001027);
ui_print("Removing unneeded files...");
delete("/system/app/VZWAPNLib.apk", "/system/app/VZWAPNService.apk",
"/system/app/VZWSaSSOClient.apk", "/system/bin/ip6tables",
"/system/etc/permissions/vzwapnlib.xml", "/system/lib/libmotricity.so",
"/system/framework/am.jar", "/system/framework/android.policy.jar",
"/system/framework/android.test.runner.jar",
"/system/framework/bmgr.jar", "/system/framework/bouncycastle.jar",
"/system/framework/com.android.location.provider.jar",
"/system/framework/core-junit.jar", "/system/framework/ime.jar",
"/system/framework/input.jar", "/system/framework/javax.obex.jar",
"/system/framework/monkey.jar", "/system/framework/pm.jar",
"/system/framework/sec_feature.jar", "/system/framework/seccamera.jar",
"/system/framework/sechardware.jar",
"/system/framework/secmediarecorder.jar",
"/system/framework/services.jar", "/system/framework/sqlite-jdbc.jar",
"/system/framework/svc.jar", "/system/default.prop",
"/system/recovery.img");
ui_print("Patching system files...");
apply_patch("/system/app/AngryGPS.apk", "-",
f83190da0a30b15b3652b84dbffcde99bbdb6dd9, 67746,
61b30e6f16feb44aa454f451ce7a998300a1df40, package_extract_file("patch/system/app/AngryGPS.apk.p"));
set_progress(0.001372);
apply_patch("/system/app/AngryGPS.odex", "-",
5225f46ea76215434812deca94de5404370ea2d0, 100984,
6ea9c477c5ac7d78076a5b14193d7e8f2a91cc29, package_extract_file("patch/system/app/AngryGPS.odex.p"));
set_progress(0.001886);
apply_patch("/system/app/ApplicationsProvider.apk", "-",
5d9d5fad16ee9fc3c97d97e3857680d287ca4db7, 6112,
0050f2088acd33de7bec7ab06d219bfaac77376c, package_extract_file("patch/system/app/ApplicationsProvider.apk.p"));
set_progress(0.001917);
apply_patch("/system/app/ApplicationsProvider.odex", "-",
f3b58b003aadfb1e930313099e7f41a0c50732ff, 23592,
379aaba5085bfb4ccc76b1fc49de07d5fcebd974, package_extract_file("patch/system/app/ApplicationsProvider.odex.p"));
And here's the end:
Code:
ui_print("Patching LTE image...");
apply_patch("EMMC:/dev/block/mmcblk0p9:10747904:48b8ffc6c66d5e0487ed822b28e144be69e176e1:10747904:cbbc8fb2b864c5513513ccce5aa35bced0e443a3",
"-", cbbc8fb2b864c5513513ccce5aa35bced0e443a3, 10747904,
48b8ffc6c66d5e0487ed822b28e144be69e176e1, package_extract_file("patch/lte.img.p"));
set_progress(0.979318);
ui_print("Patching boot image...");
apply_patch("EMMC:/dev/block/mmcblk0p3:4050944:21bf2e3576ddb89d0eb94ce7103a1e1c9c5c7bfe:4061184:bec5b9c1d11ff42d2a313913c33637c222ee38bf",
"-", bec5b9c1d11ff42d2a313913c33637c222ee38bf, 4061184,
21bf2e3576ddb89d0eb94ce7103a1e1c9c5c7bfe, package_extract_file("patch/boot.img.p"));
set_progress(1.000000);
delete("/system/recovery-from-boot.p",
"/system/etc/install-recovery.sh");
show_progress(0.100000, 10);
ui_print("Unpacking new files...");
package_extract_dir("system", "/system");
ui_print("Unpacking new recovery...");
package_extract_dir("recovery", "/system");
ui_print("Symlinks and permissions...");
If I shouldn't have posted that mods feel free to delete or modify it as necessary.
trb-
emplox said:
I'm assuming the reason why this update fails for everyone is because you are all using CWM, and not the stock recovery. The update needs to have the stock recovery in order to successfully install.
Click to expand...
Click to collapse
Aight here is an update...
I flashed back to stock recovery then wiped it clean. Had to wait until it was 20% charged and then tried the update only to get the Android dude with a yellow triangle and exclamation point. MOFOER! This is just plain ass lame. What does this thing want from me to install the EH04 update! My first born? So currently the only thing that's not stock is the kernel. I'm still using pershoot O.C. kernel. Maybe I need to flash the stock kernel too? This is so dumb. I'll look for an update log tonight to see if I can make sense of this and let you all know. Peace!
---------- Post added at 11:47 PM ---------- Previous post was at 11:33 PM ----------
Hey trbayth, any chance you can pull those updated/patched files so we can push them with adb or help us out in any other way? Thanks for looking into this. I can't find log files or the update on my tab after downloading and having a failed install.
If someone that has already installed the update successfully could simply dump /system, recovery, boot and the kernel and package it up in a tar, we could just odin the update. Matt somebody did that for the EG01 build.
Sent from my SCH-I905 using Tapatalk
i get the update error 3,4 times Error(status 7).After that,i found the way to update successful.
1/I follow this link http://forum.xda-developers.com/showthread.php?t=1195861&page=2 .Get to post #17,download backup of mattj949 and flash with odin.I get the "root" system 4g LTE with CWM mode is 4.0.1.4 but root is not reason for update failed.
2/i continue follow this link http://forum.xda-developers.com/showthread.php?t=1205639&page=2 .Go to post #14,download stockrec.zip put in to the tab on the root of sdcard.Restart tablet,go to recovery mode,move to install zip on sdcard,chose stockrec.zip and go....
3/And i get the update via OTA and successfull update to EH04.
BTW if anyone receive the message update to EH04 and update failed.The update downloaded place in /cache and call 86bb1913cfe9.update.bin..Just rename to update.zip.And go to recovery mode,chose install zip on sdcard,and go(after flash stockrec.zip)
Hope this help for someone.Sr for my english
---------- Post added at 03:18 PM ---------- Previous post was at 02:51 PM ----------
kidserious said:
If someone that has already installed the update successfully could simply dump /system, recovery, boot and the kernel and package it up in a tar, we could just odin the update. Matt somebody did that for the EG01 build.
Sent from my SCH-I905 using Tapatalk
Click to expand...
Click to collapse
Please tell me a way to create a backup system,kernel,recovery file useful with odin.Thanks.
kyo113 said:
i get the update error 3,4 times Error(status 7).After that,i found the way to update successful.
1/I follow this link http://forum.xda-developers.com/showthread.php?t=1195861&page=2 .Get to post #17,download backup of mattj949 and flash with odin.I get the "root" system 4g LTE with CWM mode is 4.0.1.4 but root is not reason for update failed.
2/i continue follow this link http://forum.xda-developers.com/showthread.php?t=1205639&page=2 .Go to post #14,download stockrec.zip put in to the tab on the root of sdcard.Restart tablet,go to recovery mode,move to install zip on sdcard,chose stockrec.zip and go....
3/And i get the update via OTA and successfull update to EH04.
BTW if anyone receive the message update to EH04 and update failed.The update downloaded place in /cache and call 86bb1913cfe9.update.bin..Just rename to update.zip.And go to recovery mode,chose install zip on sdcard,and go(after flash stockrec.zip)
Hope this help for someone.Sr for my english
---------- Post added at 03:18 PM ---------- Previous post was at 02:51 PM ----------
Please tell me a way to create a backup system,kernel,recovery file useful with odin.Thanks.
Click to expand...
Click to collapse
This worked perfectly, thank you very much!
punkydudey101 said:
This worked perfectly, thank you very much!
Click to expand...
Click to collapse
Do you get the triangle on boot logo after update?i have one....is it a bug?how we remove it?
I changed the name in /cache to update.zip and somehow it disappeared after reboot. The tablet did revert to stalk recovery but says it is the most current version which is EGO1. Anyone have 86bb1913cfe9.update.bin?
Thanks
Psean said:
I changed the name in /cache to update.zip and somehow it disappeared after reboot. The tablet did revert to stalk recovery but says it is the most current version which is EGO1. Anyone have 86bb1913cfe9.update.bin?
Thanks
Click to expand...
Click to collapse
Yes, when I downloaded it the last time, I pulled it from my tab to my PC. I'll dropbox it for you when I get home.
Sent from my SCH-I500 using Tapatalk
Psean said:
I changed the name in /cache to update.zip and somehow it disappeared after reboot. The tablet did revert to stalk recovery but says it is the most current version which is EGO1. Anyone have 86bb1913cfe9.update.bin?
Thanks
Click to expand...
Click to collapse
For those who need the update file or can't get it to redownload, here you go: http://dl.dropbox.com/u/20070269/86bb1913cfe9.update.bin place this file in /cache and hopefully the tab will recognize it and prompt you to restart and install. I haven't tried this so let me know how it goes.
Psean said:
I changed the name in /cache to update.zip and somehow it disappeared after reboot. The tablet did revert to stalk recovery but says it is the most current version which is EGO1. Anyone have 86bb1913cfe9.update.bin?
Thanks
Click to expand...
Click to collapse
you must copy your update.zip and paste in /sdcard.then you will see it in recovery mode.
Ps: anyone have the triangle on boot logo samsung tab after update to eh04?please help me to fix this issue.thanks
Sent from my SCH-I905 using XDA App
http://www.mediafire.com/?wkhvh91lp7792yr
Requirements:
1. A custom recovery.
2. A nandroid backup.
3. Stock files, sans root.
4. Optional, but recommended that you use this to backup root access first:
https://play.google.com/store/apps/details?id=org.projectvoodoo.otarootkeeper&hl=en
It shouldnt hurt root either, but make a nandroid to be safe.
If you lose root, try flashing this:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
Updated: Removed tz.img because I don't think its needed.
So this is the OTA minus the new bootloader? So basically the new radios and the kernel patch only?
Trying this out but back up to two different locations just in case.
SeanPlunk said:
So this is the OTA minus the new bootloader? So basically the new radios and the kernel patch only?
Click to expand...
Click to collapse
Yep, and whatever else it patches.
So I can just make a nandroid and flash it over Beans v6 and it should install the radios just fine right?
nnnnr14 said:
So I can just make a nandroid and flash it over Beans v6 and it should install the radios just fine right?
Click to expand...
Click to collapse
Nope. Check requirements
I added a third one in anticipation of that question.
1) Will this work for the Verizon version of CleanRom?
2) Do I have to unroot? The directions aren't clear to me. Sorry about that.
3) If I do have to unroot, can I just use OTA rootkeeper to root again afterwards?
SeanPlunk said:
1) Will this work for the Verizon version of CleanRom?
2) Do I have to unroot? The directions aren't clear to me. Sorry about that.
3) If I do have to unroot, can I just use OTA rootkeeper to root again afterwards?
Click to expand...
Click to collapse
All answered in first post (requirements).
Thanks
1. No
2. No
3. If you lose root.
So ill have to be on stock rom...
nnnnr14 said:
So ill have to be on stock rom...
Click to expand...
Click to collapse
Yes. There is no safe way (that I know of) to force patch files on a custom rom.
When I get home, I can make a deodexed patch file, but it will overwrite any custom changes you have.
adrynalyne said:
Yes. There is no safe way (that I know of) to force patch files on a custom rom.
When I get home, I can make a deodexed patch file, but it will overwrite any custom changes you have.
Click to expand...
Click to collapse
Custom change? As in rom or themes cause I could always flash beans or another rom afterwards right?
nnnnr14 said:
Custom change? As in rom or themes cause I could always flash beans or another rom afterwards right?
Click to expand...
Click to collapse
Sure but if you flash a rom after, you just overwrite the OTA anyway.
Hey adrynalyne, thanks for all the work!
I'm about to apply this now and I have a quick question. I "Deferred" the initial update for a few days, so if apply this, will my phone still try to do the update after the deferred time? Or will it do a check on the version and see its already updated?
Thanks,
Niko49 said:
Hey adrynalyne, thanks for all the work!
I'm about to apply this now and I have a quick question. I "Deferred" the initial update for a few days, so if apply this, will my phone still try to do the update after the deferred time? Or will it do a check on the version and see its already updated?
Thanks,
Click to expand...
Click to collapse
It will stop annoying you if you apply this.
adrynalyne said:
Sure but if you flash a rom after, you just overwrite the OTA anyway.
Click to expand...
Click to collapse
Ohhh... :/
Everytime I try to apply this I get "assert failed: apply_patch_check("/system/app/SystemUI.apk", "<insert some hash>", "<insert different hash>")"
I am running CWM v6.0.2.5, and I am running the stock Verizon ROM with a few mods applied.
Yeah you have modified SystemUI.apk. You will need to put it back to stock. The original files must be in place.
Also, this might not remove an update if its been deferred. But the new one can't install over this one so... make sure you have a custom reovery flashed, run it and it won't be deferred anymore.
adrynalyne said:
Yeah you have modified SystemUI.apk. You will need to put it back to stock. The original files must be in place.
Also, this might not remove an update if its been deferred. But the new one can't install over this one so... make sure you have a custom reovery flashed, run it and it won't be deferred anymore.
Click to expand...
Click to collapse
Thanks, My "Wifi-Toggle" mod had modified it. It looks like we will also loose "All apps to Multi-Window mode" too, as the services.odex file has to be restored as well.
Niko49 said:
Everytime I try to apply this I get "assert failed: apply_patch_check("/system/app/SystemUI.apk", "<insert some hash>", "<insert different hash>")"
I am running CWM v6.0.2.5, and I am running the stock Verizon ROM with a few mods applied.
Click to expand...
Click to collapse
I am running TWRP and getting an error message as well:
assert failed: getprop("ro.product.device") == "getprop("ro.build.product") == "t0ltevzw"
E: error in /sdcard/safe_update.zip
(Status 7)
Error flashing zip '/sdcard/safe_update.zip'
cphastings said:
I am running TWRP and getting an error message as well:
assert failed: getprop("ro.product.device") == "getprop("ro.build.product") == "t0ltevzw"
E: error in /sdcard/safe_update.zip
(Status 7)
Error flashing zip '/sdcard/safe_update.zip'
Click to expand...
Click to collapse
Old versions of twrp have broken asserts. You will need to update twrp to the latest version.
Hello and thanks for any help.
I softbricked my phone trying to install the OTA, so in an attempt to recover, I ran Razr util 1.82, selected option 1, and let it install. Then, while in recovery, I attempted to install the full JB update, and get the following error message:
Verifying current system...
assert failed: apply_patch_check("EMMC:boot:8388608:46b1d867743b5 a4db403dc2cd67a124cbd2b2173:8388608:7abc93a
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Anyone have any experience with this error? I've tried to troubleshoot the JB package and downloaded 3 different .zip's - has not changed or solved the problem.
Currently without a phone and hoping my phone is still salvageable! Any advice?
positivehxcgo said:
Hello and thanks for any help.
I softbricked my phone trying to install the OTA, so in an attempt to recover, I ran Razr util 1.82, selected option 1, and let it install. Then, while in recovery, I attempted to install the full JB update, and get the following error message:
Verifying current system...
assert failed: apply_patch_check("EMMC:boot:8388608:46b1d867743b5 a4db403dc2cd67a124cbd2b2173:8388608:7abc93a
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Anyone have any experience with this error? I've tried to troubleshoot the JB package and downloaded 3 different .zip's - has not changed or solved the problem.
Currently without a phone and hoping my phone is still salvageable! Any advice?
Click to expand...
Click to collapse
reflash the firmware and flash the ota
EDIT: make sure you are on the same firmware
I actually stumbled upon the 4.1.2 fastboot files...
http://sbf.droid-developers.org/cdma_spyder/list.php
Looks like a fresh release?? I just flashed it an it's currently in the device setup phase!
What is your system version .. Upload a screenshoot of ya about phone so we can try somtjing.
Sent from my Droid Razr HD (4GLTE) using Tapatalk 2
positivehxcgo said:
I actually stumbled upon the 4.1.2 fastboot files...
http://sbf.droid-developers.org/cdma_spyder/list.php
Looks like a fresh release?? I just flashed it an it's currently in the device setup phase!
Click to expand...
Click to collapse
Did it work for you? I was up the same creek haha, I'm downloading the new fastboot files now...fingers crossed
EDIT: My signature verification failed...any clues?
if you're on ICS then use this: http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
Gus194 said:
if you're on ICS then use this: http://www.droidrzr.com/index.php/t...xt912-jellybean-windows-mac-linux-all-in-one/
Click to expand...
Click to collapse
Can't believe I didn't see this.......if this works, I love you haha
EDIT: I love you haha, thanks!!!!
mrl515 said:
Can't believe I didn't see this.......if this works, I love you haha
EDIT: I love you haha, thanks!!!!
Click to expand...
Click to collapse
No problem.
Need help peazessss!
positivehxcgo said:
Hello and thanks for any help.
I softbricked my phone trying to install the OTA, so in an attempt to recover, I ran Razr util 1.82, selected option 1, and let it install. Then, while in recovery, I attempted to install the full JB update, and get the following error message:
Verifying current system...
assert failed: apply_patch_check("EMMC:boot:8388608:46b1d867743b5 a4db403dc2cd67a124cbd2b2173:8388608:7abc93a
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted
Anyone have any experience with this error? I've tried to troubleshoot the JB package and downloaded 3 different .zip's - has not changed or solved the problem.
Currently without a phone and hoping my phone is still salvageable! Any advice?
Click to expand...
Click to collapse
so im having a problem with this issue too. i followed all the instructions as it was stated. when i get to number 10. i get a status 7 error. any hope of surviving this brick? could it be a bad download of the blur? im new too any phone fixing but it says E: Error in /tmp/sideload/package.zip
NVM i found the solution , try this video youtube.com/watch?v=z9lPw5Lxpx4
I'm running the latest stock firmware and Siyah kernel. I tried to flash the latest version of the LiquidSmooth rom and receievd the error:
assert failed: getprop ("ro.product.device") == "d2aat" l l getprop ("ro.build.product") == "d2att"
E: Error in /emmc//Liquid-JB-v2.0-RC5-d2att.zip
(status 7)
Installation aborted.
I did some searching and concluded that my outdated version of cwm is causing the problem. I first attempted to upgrade to the latest version of Touch cwm with Rom manager but was unable to install the update because apparently there was an "Error while downloading from server." I tried about 10 times on both wifi and 3g to avail. I then attempted to manually flash Touch v.6.0.3.5 from a .zip file in my current version of cwm (non-touch v.6.0.3.2) and although it said 'install from sdcard complete', when I reboot into recovery I'm still on the 6.0.3.2 version, the update won't stick. I tried multiple times but I just can't get it to overwrite my current version of cwm. Lastly I tried flashing Touch v.6.0.3.5 with a .tar file via oOdin. Odin said the flash was successful but when I tried to boot into recovery it got stuck on the Samsung logo. I just used Rom manager to flash back to 6.0.3.2 and now I'm back to square one.
All I want to do is update my recovery! Why is this so difficult? :crying:
I'd greatly appreciate any advice you can offer.
Anyone? Sorry, I know bumping is kind of obnoxious but I'm really stuck here.
kilgorcalrizian said:
Anyone? Sorry, I know bumping is kind of obnoxious but I'm really stuck here.
Click to expand...
Click to collapse
Try PhilZ Touch recovery. And as far as I know 6.0.3.5 isn't ready for the S3 yet so maybe that's why you're having problems.
kilgorcalrizian said:
Anyone? Sorry, I know bumping is kind of obnoxious but I'm really stuck here.
Click to expand...
Click to collapse
More to the point its against the rules .
As said try Philz do not use Rom Manager .
jje
Try PhilZ Touch recovery.
Click to expand...
Click to collapse
Thanks for replying. I successfully flashed PhilZ recovery so that's a step in the right direction. However I still can't flash Liquid Smooth. When I select 'install from .zip' and then 'choose file from sd card' the Liquid Smooth zip file isn't there (even though it is definitely the on the root of my SD card), it was detected on my previous version of cwm but not on PhilZ for some reason. When I select 'choose file from sd card' all I see is a directory called 'clockworkmod /', when I select that it just says 'no files found.' What am I doing wrong?
More to the point its against the rules .
Click to expand...
Click to collapse
Sorry, I won't do it again.
You don't sound too big on reading information, try following the instructions for philz interface as it sounds like you're looking at your internal sd card.
boomboomer said:
You don't sound too big on reading information, try following the instructions for philz interface as it sounds like you're looking at your internal sd card.
Click to expand...
Click to collapse
I actually did skim the entire page (http://forum.xda-developers.com/showthread.php?t=2201860) and couldn't find any help. After reading your post I also did a control+g search for the word 'sdcard' and couldn't find the information you alluded to. Anyway, I moved the Liquid Smooth zip to my external SD card as your post implied I should. I can see the zip now so thanks. However, when I try to flash it, I'm still getting the exact same error as I was on my original version of cwm:
assert failed: getprop ("ro.product.device") == "d2aat" l l getprop ("ro.build.product") == "d2att"
E: Error in /emmc//Liquid-JB-v2.0-RC5-d2att.zip
(status 7)
Installation aborted.
kilgorcalrizian said:
I actually did skim the entire page (http://forum.xda-developers.com/showthread.php?t=2201860) and couldn't find any help. After reading your post I also did a control+g search for the word 'sdcard' and couldn't find the information you alluded to. Anyway, I moved the Liquid Smooth zip to my external SD card as your post implied I should. I can see the zip now so thanks. However, when I try to flash it, I'm still getting the exact same error as I was on my original version of cwm:
assert failed: getprop ("ro.product.device") == "d2aat" l l getprop ("ro.build.product") == "d2att"
E: Error in /emmc//Liquid-JB-v2.0-RC5-d2att.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
EDIT: Just tried TWRP and I'm still getting the 'assert failed' error. This is getting so frustrating!
kilgorcalrizian said:
EDIT: Just tried TWRP and I'm still getting the 'assert failed' error. This is getting so frustrating!
Click to expand...
Click to collapse
Ask in the roms thread .
Or totally wipe your phone and start from stock .
jje
JJEgan said:
Ask in the roms thread .
Or totally wipe your phone and start from stock .
jje
Click to expand...
Click to collapse
I've already tried wiping so I'll head over the official Liquid Smooth thread and see if anyone there can help me out. Thanks for trying to help everyone, at least we've ruled out the possibility that it's a recovery issue.
Looking at the error you are trying to flash the AT& T VERSION!
slaphead20 said:
Looking at the error you are trying to flash the AT& T VERSION!
Click to expand...
Click to collapse
Thanks but I'm definitely, flashing the i9300 version, I copied the error from another thread and forgot to edit the version.
EDIT: I am the biggest idiot in the world. It turns out I was using the AT & T version, know idea how the hell I managed to miss that. I guess Boomer was right, I do suck at reading information. Sorry for wasting everyone's time. Thank you so much Slaphead!
kilgorcalrizian said:
Thanks but I'm definitely, flashing the i9300 version, I copied the error from another thread and forgot to edit the version.
EDIT: I am the biggest idiot in the world. It turns out I was using the AT & T version, know idea how the hell I managed to miss that. I guess Boomer was right, I do suck at reading information. Sorry for wasting everyone's time. Thank you so much Slaphead!
Click to expand...
Click to collapse
Well super thanks to you, I had the same issue... the rom didn't flash, but because you realised you made a mistake on the version I double checked mine :silly: as it turns out I was trying to flash the i900... not i9300 rom I feel so dumb
I have downloaded a few roms for my AT&T I717 Note.
WhenI try to install them via CWM I get an error STATUS 7 , "this package is for SGH-I717 quincyatt. devices; this is a i717"
Under the battery it shows it as a GT-I717.
I cant seem to find a Rom for it
I had flashed this ROM
KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 before trying to install the other ROMs
confrontation said:
I have downloaded a few roms for my AT&T I717 Note.
WhenI try to install them via CWM I get an error STATUS 7 , "this package is for SGH-I717 quincyatt. devices; this is a i717"
Under the battery it shows it as a GT-I717.
I cant seem to find a Rom for it
I had flashed this ROM
KIES_HOME_I717UCMD3_I717ATTMD3_1117019_REV02_user_low_ship.tar.md5 before trying to install the other ROMs
Click to expand...
Click to collapse
Your recovery simply needs updated. Make sure you have the newer files.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
Your recovery simply needs updated. Make sure you have the newer files.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
I'm having the same problem. Can define how to 'update' a recovery and point me to an explanation of how to do it? Thanks
pstrulm said:
I'm having the same problem. Can define how to 'update' a recovery and point me to an explanation of how to do it? Thanks
Click to expand...
Click to collapse
What recovery are you running now?
CWM 6.?.?.?.
TWRP 2.?.?.?
Are you getting status 7?
What are you trying to flash?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
captemo said:
What recovery are you running now?
CWM 6.?.?.?.
TWRP 2.?.?.?
Are you getting status 7?
What are you trying to flash?
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks captemo. Checked CWM and it's 5.5.0.4. Sounds like a problem, doesn't it? The ROM was Beanstalk 4.4.4001 - 20140621 - quincyatt_2.zip. The bezel on my Note is not designated ATT, so I'm wondering if it will not accept this ROM. The label under the battery simply says "Samsung SGH-i717".
Thanks again for any help.
pstrulm said:
Thanks captemo. Checked CWM and it's 5.5.0.4. Sounds like a problem, doesn't it? The ROM was Beanstalk 4.4.4001 - 20140621 - quincyatt_2.zip. The bezel on my Note is not designated ATT, so I'm wondering if it will not accept this ROM. The label under the battery simply says "Samsung SGH-i717".
Thanks again for any help.
Click to expand...
Click to collapse
Thats a pretty old version and many KK roms wont flash with them.
There is a TWRP 2.7.1.0 from Gimmieorilltell in Development.
There is also an update CWM Touch, I beleive 6.0.4.7
Both of them are flashable zips. Download and flash like any rom. Once you boot up into whatever rom you are now on, or I guess you could pull battery, but next time you boot into recovery your new one will be there.
TWRP is super easy.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Wow! I'm feeling pretty dumb here, but when I attempt to flash the TWRP 2.7.1.0 zip through CWM 5.5.0.4, it returns:
"Installing update. . .
assert failed: getprop("ro.build.product") == "SGH - I727" getprop("ro.product.device") == "skyrocket"
getprop("ro.build.product") == "skyrocket"
E:Error in /emmc/jjd-openreovery-twrp-skyrocket-2.7.1.0.zip
(Status 7)
Installation aborted.
And when I attempt CWM 6.0.4.7, it defaults back to 5.5.0.4 when I reboot into recovery. Any ideas? These are not supposed to be installed through Odin3, are they?
pstrulm said:
Wow! I'm feeling pretty dumb here, but when I attempt to flash the TWRP 2.7.1.0 zip through CWM 5.5.0.4, it returns:
"Installing update. . .
assert failed: getprop("ro.build.product") == "SGH - I727" getprop("ro.product.device") == "skyrocket"
getprop("ro.build.product") == "skyrocket"
E:Error in /emmc/jjd-openreovery-twrp-skyrocket-2.7.1.0.zip
(Status 7)
Installation aborted.
And when I attempt CWM 6.0.4.7, it defaults back to 5.5.0.4 when I reboot into recovery. Any ideas? These are not supposed to be installed through Odin3, are they?
Click to expand...
Click to collapse
I'll help you get TWRP 2.7 on your phone. Download it here: https://drive.google.com/file/d/0ByoEy8x_JgpqTHRvRk5PVjhXTlE/edit?usp=sharing
Then use Odin 3.07 available here https://drive.google.com/file/d/0ByoEy8x_JgpqbUt3WEl3YzZxWFE/edit?usp=sharing to flash it with.
(You'll have to copy and paste the links because I'm still a new member.)
You will flash Odin in the PDA slot. Make sure only Auto Reboot and F. Reset Time options are checked.
Both of the links above are to my google drive so I know the files work. Good luck! Let me know how it went.
(I'm sure you know this but I'm tired and just to be safe, Volume down and power button on your phone at the same time for download mode. You'll need to enter it to use Odin.)
pstrulm said:
Wow! I'm feeling pretty dumb here, but when I attempt to flash the TWRP 2.7.1.0 zip through CWM 5.5.0.4, it returns:
"Installing update. . .
assert failed: getprop("ro.build.product") == "SGH - I727" getprop("ro.product.device") == "skyrocket"
getprop("ro.build.product") == "skyrocket"
E:Error in /emmc/jjd-openreovery-twrp-skyrocket-2.7.1.0.zip
(Status 7)
Installation aborted.
And when I attempt CWM 6.0.4.7, it defaults back to 5.5.0.4 when I reboot into recovery. Any ideas? These are not supposed to be installed through Odin3, are they?
Click to expand...
Click to collapse
This is making me think you are not reading OP. I have used both files and never had "skyrocket" anything. Did you get files from right place.
If you read OP's you may have seen that these are flashable zips. There are file that will go through Odin, but flashing like rom is just so easy.
Let us know how it goes and dont forget to thank the pereon who provided with Odin files. Sorry cant remember name while typing here.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
Thanks to all, but I'm in a big mess now. I downloaded TWRP, downloaded through Odin, was up and running well. Backed up system in TWRP, re-attempted to flash Beanstalk, but no luck. Wiped and tried to restore original backup . . . nothing! Now after several attempts, my phone won't even turn on and go into TWRP. Am I finished? The Samsung Galaxy Note will not boot to anything. In fact there is no response with phone even with fully charged battery. Heeeellllllllpppppp!
pstrulm said:
Thanks to all, but I'm in a big mess now. I downloaded TWRP, downloaded through Odin, was up and running well. Backed up system in TWRP, re-attempted to flash Beanstalk, but no luck. Wiped and tried to restore original backup . . . nothing! Now after several attempts, my phone won't even turn on and go into TWRP. Am I finished? The Samsung Galaxy Note will not boot to anything. In fact there is no response with phone even with fully charged battery. Heeeellllllllpppppp!
Click to expand...
Click to collapse
You got right device file???
Can you get download mode???
Flick the back of phone a couple time with finger. Stuck power button can be common. Dont be afraid to flick pretty good. Dont hurt finger though. Button may sound or feel normal, but could still be stuck.
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
try to pull the battery out, once out hold down both volume buttons along with power button, put battery back in while still holding all three buttons and see if it gets you into download mode. I had the same issue when upgrading cwm to twrp 2.7.1.0 a few days ago, I got stuck in a bootloop like you and only way I recovered was going back to stock and work my way back up to 4.4.4. I havnt upgraded to twrp yet but when I do this time I'm extracting the recovery. IMG and using flashify to flash it this time around.
Sent from my Half Baked Vibrant
I hate to ask this question but it needs to be asked. Are you absolutely positive that you have a Galaxy Note i717?
The reason I ask is that "Skyrocket" is the designation for the Galaxy II.....i727.
Sent from my SM-T310 using XDA Premium 4 mobile app