hi there,
just got a gtab and wanted to install a custom ROM.
i am trying to go into bootloader, by pressing power and volume up keys and letting go when i see 'recovery key detected' but when i do that a second line shows 'bootig recovery kernal image' and it stay just like that. it does not actually go into menu system and it just stays there !!!!
the tabet loads jsut fine if i dont want to go into bootloader.
what am i doing wrong here pls ?
I believe you are referring to the "recovery" not the "bootloader"... completely different!!!
Anyhow, if you have a stock G-tablet... the stock recovery has no "menu"... the menu in the recovery is present in only the 1.2 based stock ROM... or if you installed CWM...
You need to copy the zip, re-named as "updated.zip", to the internal SD and create a folder named "recovery" with the recovery command in a file named "command"... look though the forum for examples and info...
hi and thanks. yes, i got a little confussed with the terminology !
i see that i have a TapUI version 1.2-4349 which according to you i should be able to see the menu right ?
shall i downgrade to 1.1-3588 as i would like to install custom roms anyways ?
thanks.
If you want any custom roms or kernels you need to remove the locked bootloader by using gojimis tool or nvflash.
same issue
edd32 said:
hi there,
by pressing power and volume up keys and letting go when i see 'recovery key detected'
but when i do that a second line shows 'bootig recovery kernal image' and it stay just like that.
Click to expand...
Click to collapse
i'm having the same results.
i've followed the instructions to a 'T' and read through all the pertinent sticky threads.
i'm currently trying to downgrade from 4349 via these instructions: http://forum.xda-developers.com/showthread.php?t=1036956
confirmed that i am on 4349
downloaded the linked file.
renamed it to 'update.zip'
created a recovery folder containing a command file pointing to the update.zip (actual text is: --update_package=SDCARD:/update.zip)
loaded both the folder>command and .zip file in /sdcard
held Vol+ and Pwr
then i get stuck on the viewsonic birds screen with the two messages indicated by OP.
any guidance would be appreciated.
Related
ATTENTION - IF YOU ARE ON STOCK 4349+ or any MOD BASED OFF 4349+ USING THE NEW LOCKED BOOTLOADER! READ PLEASE!
Starting with the most recent update to Tap N Tap Viewsonic has introduced a new LOCKED Bootloader. This bootloader is locked in the sense that only a stock kernel will be allowed to boot on your device! This bootloader provides absolutely no advantage other than being able to boot any new STOCK kernels. Since we don't want the STOCK KERNEL and would rather prefer one of Pershoot's standard and newly Overclocked kernels or one of Clemsysn's kernels on MOST of our Modded ROM's you must Downgrade your bootloader and TNT Version before you flash a new kernel or a new ROM.
Please download the following downgrade update.zip and place it on your sdcard renaming it to "update.zip".
http://www.gtabdevs.com/releases/4349_Downgrade.zip
Then power down your device. And power back up while holding the power button and vol + till your display says "recovery key detected" in the top left corner.
Using the volume keys to navigate up/down in the menu highlight "Apply Internal update.zip" if you copied the update.zip to the internal memory or "Apply External SDCard update.zip" if you happened to place it on an external SDCard and then inserted it before booting to recovery. Now select the menu choice using the menu key.
This process will take a few minutes. You will see a Box with an arrow and a progress bar while it applies the update.... when it is finished it will reboot to make the changes. Once the changes are complete your tablet will boot into Tap N Tap version 3588 (cringe).
You are now free to follow all the tutorials about installing CWM and/or Kernels/Roms.
Thank you and good luck.
After runing the revolutionary thing I accidentally took out the usb while it said " would u like to install clockwork recovery mod". So I tried to install the .zip that would install it on the fastboot but instead of doing that it checked the .zip and said that it had no image inside of it I'm thinking I stewed up big time cause I can't even unroot it and when I try to run the revolutionary thing again it would say device not supported any help or should I just give up?
try re-downloading a recovery from here.
http://forum.xda-developers.com/showthread.php?t=1192661 (clockwork recovery mod)
http://forum.xda-developers.com/showthread.php?t=1192077 (for TWRP)
I've been using TWRP - TeamWin Recovery Project. I like it. Try downloading the PG86IMG-twrp-shooter-1.0.1.zip file and renaming it PG86IMG.zip and place it on the root of your SDcard. Reboot into Hboot by doing a battery pull then while holding vol-down press power. then let it do it's thing when ask if you want to apply the update press vol-up. then reboot and delete the PG86IMG.zip and reboot into Hboot again and you should be able to get into recovery and start having fun.
Let me know if this solves your problem.
I got this message after trying that recovery again
=============================================
| Revolutionary S-OFF & Recovery Tool 0.3pre7 |
=============================================
Brought to you by AlphaRev & Unrevoked. Special thanks to #teamwin for their wor
k on fre3vo!
Waiting for device...
Found your device: PG86100 (shooter-1.40.1000, Android: 2.3.3, ROM version: 1.13
.651.7)
Your device is not supported at this time.
Press (almost) any key to exit.
Im thinking its because of what I typed in the beta key registration when i tried this before I put in 1.40.0000. I the message above it says that I have a shooter-1.40.1000 which is probs y it says it doesnt support
As for the TWRP I found the problem for me because im a windows 7 user it puts it as a .zip file and doesnt include it in the name you see under the icon. Call me crazy but I think my problem this whole time was that I was adding a .zip to the end of each name. When I tried it without the name it worked!!!.
Thanks Mr. Shroom I gave u like a thank thing if that matters
Phone Details
Motorola Atrix 4G AT&T (bought around June 2011 Time frame)
System Version
4.5.91.MB860.ATT.en.US
Model Number
MB860
Android Version
2.34
Baseband Version
N_01.77.30P
Webtop Version
WT-1.2.0-110
Kernel Version
[email protected] #2
Build Number
4.5.91
I am absolutely new to this Android ROM installs on the phones. Though I decided to install this ROM I absolutely didn’t’ have any idea how to proceed. As a beginner I started doing the following in order.
Download and Keep the CM7 ROM
1. Downloaded Ba2F.zip to my laptop
2. Downloaded and Installed the Motorola USB drivers MotoHelper_2.0.53_Driver_5.2.0.EXE
3. Connect the Atrix and set the USB option on the phone to “USB Mass Storage”
4. Copy both BaTF.zip as well as the Extracted one to Phone internal storage as well as the Ext-SDcard on the phone
Download ROM Manager and Titanium Backup
1. Downloaded both from Android Market (ROM Manager Pro and Titanium Backup Free Version)
2. Both Apps won’t open because I had not ROOTED the phone
Root the Phone
1. I used “Pete's Motorola Root Tools.EXE” file to ROOT the phone
2. Followed step by step as mentioned here http://www.androidauthority.com/how-to-root-motorola-atrix-4g-35233/
Flash ClockworkMod Recovery
1. I used ROM Manager to do this as when you try to do anything in ROM manager it prompts to do this. The version of this is 5.0.2.0 ( I am not sure what is this for why we have to do this)
Unlocking the Bootloader
1. What I learned is, to unlock the bootloader, we have to first flash the phone with the SBF file
a. Installed RSDLite5.3.1.msi
b. Loaded the file 4547-fix-try2.sbf (Downloaded from http://forum.xda-developers.com/showthread.php?t=1136261)
c. Boot the phone with Power+volume UPPER key pressed till "Starting RSD protocol support" comes up
d. Connect to the Laptop and Hit Start button in RSD Lite Program
e. It Did Throw an error saying “FAIL” after showing the following message
i. Failed to boot: error 0x1000'( not word for word). There will also be a list of boot options like Fastboot, RSD, Recovery, etc. And it says Starting Fastboot Protocol
2. Then comes unlocking the phone
a. Though I had the previous error message, it still had the Fastboot Protocol loaded
b. I went to the FASTBOOT folder in command prompt of my laptop executed the following to unlock the phone which worked perfectly as I see the “Unlock” on the left hand corner when phone boots
c. fastboot oem unlock (it gave me the code) then I used the code to unlock
d. fastboot oem unlock #######
e. fastboot reboot
3. Installing the recovery IMG
a. I had downloaded the Recovery IMG file (recovery-atrix5.img) from http://forum.xda-developers.com/showthread.php?t=1204500
b. Booted the phone into Fastboot mode (turn off phone, hold power and volume down key until 'fastboot' appears then use volume up to select so it says 'starting fastboot protocol support').
c. From the CMD promnt and FASTBOOT directory I used fastboot erase recovery
d. Then I executed fastboot flash recovery recovery-atrix5.img (Note: I didn’t rename the file to recovery as suggested by some people)
e. Then gave fastboot reboot to restart.
4. Booting into Recovery mode (This is where I have the problem)
a. The phone is not booting into recovery it’s not going past the Android and yellow Triangle screen
b. I re-flashed the phone same SBF file (this time it was a success showed in the RSD Lite Program), re-installed the same IMG file after renaming to recovery.img
c. Also tried with a different IMG from the same link (recovery-blue-atrix5.img) but no luck
d. Also deleted the file install-recovery.sh from ./etc/ folder (bought the app root manager to delete the file) and then push the recovery.img, no luck
e. Some people said to TAP the bottom right corner while on that screen, did that but nothing is happening
f. Then I saw a note to press both the Volume Keys at the same time, this works but in this mode the cursor (I mean the selection) on the phone doesn’t go to the First TWO (i and iii) shown below, it allows me to select any of the last FOUR (v, vi, vii, viii).
i. Android System Recovery <3e>
ii. <EMPTY LINE >
iii. Android System Recovery utility
iv. <EMPTY LINE >
v. Reboot System now
vi. Apply update from sdcard
vii. Wipe data/factory reset
viii. Wipe cache partition
g. Using the above option I did factory reset but sill no results.
5. Current condition of the phone
a. It boots in unlock mode and I can do all the daily tasks. But I want to install the CM7 ROM that’s my requirement
PLEASE HELP HELP HELP
First of all, I applaud your effort in giving the a very comprehensive description of your issue.
Second, it seems you are having issues with installing a custom recovery because the recovery you're describing is still the stock recovery. I'll look around and see if I can find something that might help.
jhakash said:
4. Booting into Recovery mode (This is where I have the problem)
a. It boots in unlock mode and I can do all the daily tasks. But I want to install the CM7 ROM that’s my requirement
PLEASE HELP HELP HELP
Click to expand...
Click to collapse
---------- Post added at 11:31 AM ---------- Previous post was at 11:28 AM ----------
Have you tried re-installing the CWM from RomManager through RomManager? And then boot into recovery from within the app?
---------- Post added at 11:40 AM ---------- Previous post was at 11:31 AM ----------
EDIT: This might seem trivial, but is "USB Debugging" turned on?
You are the Man, I just flashed the same CWM 5.0.2.0 and i am in the recovery mode. This gave me an error when i did last time hence i didn't try again.
Thanks a bunch
Glad I can help, also, I think it's recommended to use the RomManager recovery for CM7 so good thing it worked.
jhakash said:
You are the Man, I just flashed the same CWM 5.0.2.0 and i am in the recovery mode. This gave me an error when i did last time hence i didn't try again.
Thanks a bunch
Click to expand...
Click to collapse
Oops.. started again, Can i use the recovery-atrix5.img and ROM manager flash it? if yes, then how?
I copy this file (after renaming to recovery.img) to both internal storage and SD card then what option should i choose in ROM Manager?
If you downloaded the CWM zip file for the romracer recovery and as long as RomManager's recovery is working then, yes, you can.
jhakash said:
Oops.. started again, Can i use the recovery-atrix5.img and ROM manager flash it? if yes, then how?
I copy this file (after renaming to recovery.img) to both internal storage and SD card then what option should i choose in ROM Manager?
Click to expand...
Click to collapse
jhakash said:
Oops.. started again, Can i use the recovery-atrix5.img and ROM manager flash it? if yes, then how?
I copy this file (after renaming to recovery.img) to both internal storage and SD card then what option should i choose in ROM Manager?
Click to expand...
Click to collapse
See post#2 from romracer's thread. Read the Miscellaneous part. Probably need to get rid of, or backup, install-recovery.sh.
He has mentioned he already did that. In his OP, under the steps he took look at "Booting into Recovery Mode" - 4.d, he says he removed it.
Maybe he's not doing it in the right order? Do you happen to know which should be done first as far as installing recovery and removing said file?
ghost_og said:
See post#2 from romracer's thread. Read the Miscellaneous part. Probably need to get rid of, or backup, install-recovery.sh.
Click to expand...
Click to collapse
live4nyy said:
He has mentioned he already did that. In his OP, under the steps he took look at "Booting into Recovery Mode" - 4.d, he says he removed it.
Maybe he's not doing it in the right order? Do you happen to know which should be done first as far as installing recovery and removing said file?
Click to expand...
Click to collapse
Woops, I should have read more carefully. It's best to remove the file first and then flash the recovery.img, or else the script will install the stock recovery on boot. That would make stock recovery the current one on the phone at the time of the script getting deleted.
I would double check and make sure /system/etc does not have install-recovery.sh. If it is not there, then proceed to the fastboot steps and reflash the recovery.img again. It should stick this time.
@Ghost, yes i deleted the file multiple times however i didn't find the /system/etc folder on the Internal Storage. however I found the install-recovery.sh file under /etc folder. The thing i observed that whether i flash it with a new CWM or not if i reboot the phone then it was created by itself.
@Live4nyy, Thanks for your suggestion, I could able to install CM7 now and it looks awesome good so far, but looks like i need to install Google Apps separately to access the APP market, am I right?
The only thing that happens to me is, it allowed me to go to Recovery only ONCE after i Flashed it thru ROM Manager, if i exit out of recovery without doing anything then next time tried to go to Recovery, it will struck at the same old Android screen and i had to flash it again. But Many thanks for suggesting to flash it thru ROM Manager.
Now with CM7, under ROM Manager (I guess this comes default with CM7) I see there is no version listed under "Flash Clockworkmod Recovery" and it says i must have to install it in-order to Flash and restore ROMs, do i need to do that? I can go to Recovery mode after reboot without any issues. Please Advise.
------
Jhakash
jhakash said:
@Ghost, yes i deleted the file multiple times however i didn't find the /system/etc folder on the Internal Storage. however I found the install-recovery.sh file under /etc folder. The thing i observed that whether i flash it with a new CWM or not if i reboot the phone then it was created by itself.
Click to expand...
Click to collapse
I just checked out my girlfriend's stock, locked, unrooted Atrix and she actually has install-recovery.sh in both /etc and /system/etc. Her file manager does not alphabetize anything in either folder, so I almost overlooked the second one.
If you're already on CM7, then you probably won't need to worry anymore. They have an entirely different set of start up scripts in that folder. Welcome to the community!
At this point I do not know enough to help you any further with this issue. All I knew about is the file that needs to be removed that @ghost_og has mentioned. But if you can flash it from RomManager and access CWM from there as well then I guess that's a good enough workaround for now.
Does anyone else have any idea why the stock recovery cannot be removed?
jhakash said:
@Live4nyy, Thanks for your suggestion, I could able to install CM7 now and it looks awesome good so far, but looks like i need to install Google Apps separately to access the APP market, am I right?
The only thing that happens to me is, it allowed me to go to Recovery only ONCE after i Flashed it thru ROM Manager, if i exit out of recovery without doing anything then next time tried to go to Recovery, it will struck at the same old Android screen and i had to flash it again. But Many thanks for suggesting to flash it thru ROM Manager.
Now with CM7, under ROM Manager (I guess this comes default with CM7) I see there is no version listed under "Flash Clockworkmod Recovery" and it says i must have to install it in-order to Flash and restore ROMs, do i need to do that? I can go to Recovery mode after reboot without any issues. Please Advise.
------
Jhakash
Click to expand...
Click to collapse
I am good to go now, everything seems to be functioning well after flashing CM7 ROM, no more recovery issues, and the Stock recovery is gone now.
Appreciate for all the info you guys provided, it helped a lot. Have a great day and Merry Christmas.
Regards
Jhakash
Hi.
While trying to upgrade my tablet to a later version of Android, something borked the bootloader. The tablet boots fine to a bare ICS (no gapps, but ROM MANAGER installed, though it does nothing but hang), but trying to boot into recovery mode hangs it (black screen with android robot, OEM info).
I can install apks to the tablet. I have installed ADB on my PC and it sees my tablet.
Where do I go from here ?
I have no clue
- what exact file(s) I need (my tablet is an Ainol novo8 advanced)
- where I need to put them
- what the commands are to do that
- it should be rooted (the superuser app aloows me to grant su privileges to apps)
Any help that can bring my tablet back to life would be very welcome.
Olivier
obarthelemy said:
Hi.
While trying to upgrade my tablet to a later version of Android, something borked the bootloader. The tablet boots fine to a bare ICS (no gapps, but ROM MANAGER installed, though it does nothing but hang), but trying to boot into recovery mode hangs it (black screen with android robot, OEM info).
I can install apks to the tablet. I have installed ADB on my PC and it sees my tablet.
Where do I go from here ?
I have no clue
- what exact file(s) I need (my tablet is an Ainol novo8 advanced)
- where I need to put them
- what the commands are to do that
- it should be rooted (the superuser app aloows me to grant su privileges to apps)
Any help that can bring my tablet back to life would be very welcome.
Olivier
Click to expand...
Click to collapse
If you can still use ADB your tablets bootloader is likely not messed up, it sounds like you booted the tablet into fastboot mode not recovery. To get into recovery you can enter it by holding a key combination the most common combination is holding volume up plus the power button at the same time. If that doesn't work from ADB you should be able to get into recovery by running the command:
Code:
adb reboot recovery
Also ROM manger doesn't always work right with every device so I would recommend just uninstalling ROM Manager for now. If it is booting fine into bare ICS then your tablet should be ok, if your looking for Google Apps for ICS they can be found here http://cmw.22aaf3.com/gapps/gapps-ics-20120317-signed.zip. Let me know if you still have questions .
Sent from my SCH-I535 using xda premium
Thanks a lot for your answer.
I'm sorry I didn't describe the issue well: I can no longer access the recovery mode.
I used to get to it by cold-booting the tablet holding Vol+ and Power. I used that to install ICS, gaps, powertools and 3D tools as described in http://forum.xda-developers.com/showthread.php?p=36059461#post36059461. The first package (recovery CWM) failed to installed because it was unsigned), the others installed, but in the end it seems I only got ICS: I have no gapps.
Now doing Vol+ and Power only gets me to the boot screen (a green android with OEM info, on a black background). Your "adb reboot recovery" does the same. I can only exit that screen by a hard reset.
During a normal boot, that screen flashes by for a couple of thesconds, then another, then the ICS colorful boot animation.
I have no clue how the recovery boot process works. I'm guessing it's reading a file of the internal Flash, and that file or dependencies got corrupted or partly overwritten by one of the packages I installed ? I'm not even sure if CWM recovery replaces the default recovery mode, or if it chains right after it ? I do have a supposedly-working CWM recovery .zip from the authors of the CM10 hack, as well as the "original" files listed here: http://forum.xda-developers.com/showpost.php?p=31089682&postcount=286 (official images from an out-of-the-box, unhacked tablet).
PS: the recovery mode I used to have was very rustic, only taking "update.zip" as an input, so when I did the update I had to go back and forth renaming the first package to "update.zip", applying it, renaming it "update1.zip, then on the the second package, etc, etc... It said Android System Recovery (3e), so maybe 3e was the version.
last but not least, if I could at least get the gapps onto the tablet, even w/o fixing the recovery mode, it would be very useful. I can install apks, or follow instructions to do it via adb ?
obarthelemy said:
Thanks a lot for your answer.
I'm sorry I didn't describe the issue well: I can no longer access the recovery mode.
I used to get to it by cold-booting the tablet holding Vol+ and Power. I used that to install ICS, gaps, powertools and 3D tools as described in http://forum.xda-developers.com/showthread.php?p=36059461#post36059461. The first package (recovery CWM) failed to installed because it was unsigned), the others installed, but in the end it seems I only got ICS: I have no gapps.
Now doing Vol+ and Power only gets me to the boot screen (a green android with OEM info, on a black background). Your "adb reboot recovery" does the same. I can only exit that screen by a hard reset.
During a normal boot, that screen flashes by for a couple of thesconds, then another, then the ICS colorful boot animation.
I have no clue how the recovery boot process works. I'm guessing it's reading a file of the internal Flash, and that file or dependencies got corrupted or partly overwritten by one of the packages I installed ? I'm not even sure if CWM recovery replaces the default recovery mode, or if it chains right after it ? I do have a supposedly-working CWM recovery .zip from the authors of the CM10 hack, as well as the "original" files listed here: http://forum.xda-developers.com/showpost.php?p=31089682&postcount=286 (official images from an out-of-the-box, unhacked tablet).
Click to expand...
Click to collapse
obarthelemy said:
PS: the recovery mode I used to have was very rustic, only taking "update.zip" as an input, so when I did the update I had to go back and forth renaming the first package to "update.zip", applying it, renaming it "update1.zip, then on the the second package, etc, etc... It said Android System Recovery (3e), so maybe 3e was the version.
Click to expand...
Click to collapse
obarthelemy said:
last but not least, if I could at least get the gapps onto the tablet, even w/o fixing the recovery mode, it would be very useful. I can install apks, or follow instructions to do it via adb ?
Click to expand...
Click to collapse
The recovery you are referring to is to the standard Android 3e recovery it is included in every version of Android, and will always be like that unless you install a custom recovery such as CWMR and or TWRP. As a general rule you should never install a custom ROM without having a custom recovery image installed first, essentially all the stock 3e recovery is good for is installing OTA updates and preforming a basic factory reset of your phone. You should try and fix your recovery before going any-further, you can sign the un-signed zip by using this tool. Overall, I would focus on trying to fix the recovery to prevent any further damage to your tablet and so that way you have a simple way to recover from anything that might go wrong when flashing ROMs, mods, and other zip files.
issue with the uImage linked
The uImage linked on the download pages for the CM10 and CM9 version ends in ".*"
I have no clue what the normal extension should be; replacing that *.zip doesn't work. Is the file bad, or am I just too clueless about what to do with it ?
Ok so the question is:
1- which "recovery mode" file should I install on my tablet, especially since the mod author's ones seem flaky
2- how do I do that via ADB since my tablet no longer seems to have a working "recovery mode".
I'm sorry to hassle you with those questions... I've looked around, I can't find info nor files I'm confident about ?
Just got my Le X829 last week and found out the EUI version is 5.8.016S. I've been trying to update to 019S. I've downloaded the file from http://forum.le.com/in/eui_detail.html?euiid=209 , and followed the instruction of but unable to find the SYSTEM UPDATE on my phone menu.
Just wondering what did I do wrong?
Rename the downloaded file to update.zip and put it to the root directory. Then power off the device. When off, keep the Vol up button pressed and then press the Power button to enter recovery. Once you see "RECOVERY" on the screen, release the two buttons. In Recovery, click Start update. The recovery will search for update.zip and will start to change the ROM to 019s.
Good luck!
valy_cta said:
Rename the downloaded file to update.zip and put it to the root directory. Then power off the device. When off, keep the Vol up button pressed and then press the Power button to enter recovery. Once you see "RECOVERY" on the screen, release the two buttons. In Recovery, click Start update. The recovery will search for update.zip and will start to change the ROM to 019s.
Good luck!
Click to expand...
Click to collapse
It won't let me install. It said corrupted. Do I have to root it first? how do I do it?
klee905 said:
It won't let me install. It said corrupted. Do I have to root it first? how do I do it?
Click to expand...
Click to collapse
Well, you don't have to root to install TWRP. Seems like this will be the way as stock recovery won't do the trick.
Install TWRP and then install the 019s.
When the ROM has finished installation, reboot in recovery and before reboot back to system, allow disable custom recovery. This way you are completely stock and you can receive OTA updates.