(EDIT) Found this on FascinateForums.com ( Originally Posted by bhfd64 )and decided to share since I haven't found anything "as in depth". This is to go from OTA ED01 Update and reinstall ROOT and CWM 2.5.1x
I had an issue trying other ways of always returning to blue recovery, so thought this would help those with the same issue.
Downloads:
Download Samsung drivers from HERE.
Download Odin (computer program) from HERE.
Download ClockworkMod Recovery from HERE. (place this file somewhere on your computer where you can easily locate it).
Download "update.zip" file from HERE. (place this file on the root of your sdcard...not within any folders).
Download "su-2.3.6.1.x.zip" file from HERE. (place this file on the root of your sdcard...not within any folders).
Instructions:
1. Install Samsung drivers on your computer.
2. Open Odin on your computer. (You may need to disable antivirus programs for this to work properly)
3. Power off your phone and remove the battery.
4. Plug the stock USB cord which came with your phone into a powered USB port on your computer (usually on the back of the CPU).
5. Press and hold the "volume down" button on your phone, and continue to hold it while plugging the USB cord into your phone. This will put your phone into download mode. You'll see a large yellow triangle on the screen of your phone. You will also see one of the small boxes in Odin turn yellow, as well as "Added" appearing in the message box.
6. Press the PDA button in Odin (NOT the PHONE button) and navigate to the cwr-all.tar file you downloaded earlier.
7. Press START. When this process has finished, you'll be notified in Odin (succeeded 1/failed 0) and your phone screen will go blank.
8. Unplug your phone and re-insert battery.
9. Press and hold BOTH volume buttons and the power button simultaneously. Hold all three until you see "SAMSUNG" appear. This will boot your phone into recovery. If your text is red, then you're already in ClockworkMod (CWM) Recovery and you can skip the rest of this step. If the recovery menu is blue, then you're in stock recovery. Use the volume rocker to navigate down to "apply sdcard:update.zip" and select using the "Home" softkey. This will take you to CWM Recovery (red text menu). If your phone does not boot into recovery here, just pull the battery or wait for it to boot up and then power it down and try this again. It may take a couple tries for you to get it right.
10. When you see the red text and "CwM Voodoo Lagfix Recovery 2.5.1x" at the top, use the volume rocker to navigate down to "Wipe data/factory reset." Press the power button to select, and then navigate to yes, and press the power button again to select. Do this 3 times.
11. Scroll down to "Wipe cache partition," use power button to select, and then highlight and select "Yes." Do this 3 times.
12. Scroll down to "advanced" and then select "Wipe dalvik cache." Scroll to "Yes," and use power button to select. Do this 3 times.
13. Press the "Menu" softkey to return to the previous menu in CWM Recovery.
14. Navigate down to "Install zip from sdcard." Highlight it and press the power button to select.
15. Navigate to "choose zip from sdcard" and select.
16. Navigate to the rooted "su-2.3.6.1.x.zip" file that you downloaded earlier, and select it. Scroll to "Yes," and use power button to select.
17. When you're advised of completion, press the "Menu" softkey to go back to the previous CWR screen, then highlight and select "reboot system now."
At this point your phone will reboot and you'll be rooted with fully bloated ED01 Froyo. Open up your app drawer. You should see an app called "SuperUser". If it's there, you're done! Now you can think about possibly moving on to a custom ROM and/or kernel.
Don't break your phone! It's not my prob if you do! Good Luck, This did work and I am going good!
I was literally JUST looking for a way to root the ED01 rom. Dude...YOUDAMAN!
Isn't this just the same su and busybox nemesis2all posted yesterday right here in the XDA development forum only with out the basic steps of installing ODIN and update.zip which isn't even needed with the latest CWM?
http://forum.xda-developers.com/showthread.php?t=1045048
landshark68 said:
Isn't this just the same su and busybox nemesis2all posted yesterday right here in the XDA development forum only with out the basic steps of installing ODIN and update.zip which isn't even needed with the latest CWM?
http://forum.xda-developers.com/showthread.php?t=1045048
Click to expand...
Click to collapse
not taking anything away from nemesis2all, I have used many of his creations, this is just a little more in depth. I tried his way and kept getting blue recovery, found this and thought it would help those having the same issues.
blackmamba0730 said:
I was literally JUST looking for a way to root the ED01 rom. Dude...YOUDAMAN!
Click to expand...
Click to collapse
Thanks man! Happy to help you out!
sgtflick said:
not taking anything away from nemesis2all, I have used many of his creations, this is just a little more in depth. I tried his way and kept getting blue recovery, found this and thought it would help those having the same issues.
Click to expand...
Click to collapse
Oh, ok. I was just confused.
landshark68 said:
Oh, ok. I was just confused.
Click to expand...
Click to collapse
It's cool man, I can see how it could of been mistaken. Edited- thanks for the call out
good job man, wish someone made it that easy when i first started out.
Just use Super One Click to root, fast and easy.
The reason that people are getting back to stock recovery after flashing CWM is because stock recovery re-asserts itself if a custom kernel is not flashed. Whenever you Odin back to stock and flash CWM afterwards, you should ALWAYS flash a custom kernel in CWM before booting to the OS, otherwise the change in recovery won't keep.
suppliesidejesus said:
The reason that people are getting back to stock recovery after flashing CWM is because stock recovery re-asserts itself if a custom kernel is not flashed. Whenever you Odin back to stock and flash CWM afterwards, you should ALWAYS flash a custom kernel in CWM before booting to the OS, otherwise the change in recovery won't keep.
Click to expand...
Click to collapse
I am running a stock kernel and have root/red cwm now. Im just not on stock ROM, im using Evil Fascinate 3.3.2 ... I was able to do this through these instructions.
I tried SuperOneClick and it just didn't do it for me.
Sent from Evil Fascinate 3.3.1/Black Alien 2.2/ED01 Stock
ok so i am looking just to root 2.2 and leave it stock for now so i can use some root apps what kernal should i use and this method will work for that right
sgtflick said:
I am running a stock kernel and have root/red cwm now. Im just not on stock ROM, im using Evil Fascinate 3.3.2 ... I was able to do this through these instructions.
I tried SuperOneClick and it just didn't do it for me.
Sent from Evil Fascinate 3.3.1/Black Alien 2.2/ED01 Stock
Click to expand...
Click to collapse
That's odd, I rooted my phone in less than 3 minutes using super one click.
fortesquieu said:
That's odd, I rooted my phone in less than 3 minutes using super one click.
Click to expand...
Click to collapse
Yeah, didn't work for me, as I said .... I tried multiple times
Sent from Evil Fascinate 3.3.2/Black Alien 2.5/ED01 Stock
Dirt_Mcgirt said:
ok so i am looking just to root 2.2 and leave it stock for now so i can use some root apps what kernal should i use and this method will work for that right
Click to expand...
Click to collapse
I can tell you that I rooted stock ED01 with this method, make sure you uncheck autoboot in ODIN and restart in recovery with 3button method to confirm red recovery stuck .... im on stock ED01 kernel, but you can use any of the (TW) EC01 kernels out there . im sticking with stock until they start working out some tweaks...that's just me though
Sent from Evil Fascinate 3.3.2/Black Alien 2.5/ED01 Stock
suppliesidejesus said:
The reason that people are getting back to stock recovery after flashing CWM is because stock recovery re-asserts itself if a custom kernel is not flashed. Whenever you Odin back to stock and flash CWM afterwards, you should ALWAYS flash a custom kernel in CWM before booting to the OS, otherwise the change in recovery won't keep.
Click to expand...
Click to collapse
This is important information. Unfortunately none of the HOWTO threads on installing CWM mention this in the instructions and it took me hours to even become aware that this was what was happening to me. I haven't yet figured out how to remedy the problem but at least I know what it is now. Strangely I don't think I had any problem getting CWM to stick after flashing EB01 a while back.
The original instructions on FF have been updated somewhat. Among other things the wiping steps seem to not be necessary for just getting root. Here's the link. About to try this but with CWM3.
phonefiend said:
This is important information. Unfortunately none of the HOWTO threads on installing CWM mention this in the instructions and it took me hours to even become aware that this was what was happening to me. I haven't yet figured out how to remedy the problem but at least I know what it is now. Strangely I don't think I had any problem getting CWM to stick after flashing EB01 a while back.
Click to expand...
Click to collapse
This is from original thread by Adrynalyne.
Note: Keep in mind that once you Odin CWR to ED01, you MUST also flash a kernel, or rom containing a kernel to replace the stock one, or it will revert you.
I spent days working on this issue of reverting back to stock recovery. I can tell you SSJ is absolutely correct, it is all about the kernel. Anytime you flash a stock kernel, whether it be in an ODIN package or flashing a stock kernel or a ROM that includes a stock kernel in CWM, the stock kernel will revert you back to stock blue (2e) recovery. From my experience and speaking with others, this only happens on nonvoodoo because obviously there are no stock voodoo kernels, they are all custom. You can flash the current CWM and it will stick through flashing modems in ODIN, and themes, patches, and mods in CWM. But as soon as you flash a stock kernel, you have to reflash the current CWM. So follow SSJ's advice and immediately flash a custom kernel if you are running nonvoodoo. My apologies to the OP that this is off topic from the thread. Just wanted to share the info I learned from days of previous testing.
fitti28 said:
This is from original thread by Adrynalyne.
Note: Keep in mind that once you Odin CWR to ED01, you MUST also flash a kernel, or rom containing a kernel to replace the stock one, or it will revert you.
Click to expand...
Click to collapse
He seems to have added that in the ED01 thread in the last few hours but in most of the recent Clockwork threads they don't mention this which is surprising.
Related
ATTENTION, THIS IS FOR TELUS FASCINATE USERS ONLY! (ANDROID 2.2 FROYO)
Okay, so the Telus Fascinate (T959D) is basically the same phone as the T-mobile Vibrant. The only thing stopping us from using Vibrant ROMs was not having the right kernel to flash on top. That is no longer the case, as supercurio has recently injected the Telus Fascinate stock 2.2 JL3 kernel with Voodoo and Clockwork Recovery for us.
So, here is a complete guide to installing Vibrant ROMs on the Telus Fascinate. I have been using Team Whiskey's Nero 5 with Voodoo enabled, 100% working. All the required files are attached.
Note: Please don't send me any messages saying "My phone broke! It's your fault!" This guide worked flawlessly for me, and you all know the risk involved in flashing your phones. There is a reason doing so voids your warranty. That being said, there should not be any issues if you simply follow the instructions correctly.
1. Use Titanium Backup to back up all apps and settings/data
2. Flash stock Telus Fascinate 2.2 ROM using Odin
****ONLY DO THIS IF YOU ARE COMING FROM A CUSTOM ROM. IF YOUR PHONE IS STILL STOCK, YOU MAY SKIP THIS STEP****
A. Download Odin (attached) and the Telus JL3 stock files
B. Open Odin, and put the files in the appropriate boxes
s1_odin_20100512.pit in "PIT"
T959TLJL3-REV03-ALL-low-CL763100.tar.md5 in "PDA"
T959TLJL3_FROYO_Phone-CL763100.tar in "PHONE"
SGH-T959D-CSC-TLSJL3.tar.md5 in "CSC"
C. Boot into download mode by turning phone off, then holding "Volume Down" while connecting the phone to the computer
D. The first "ID:COM" box should turn yellow and show a numerical COM port
E. Click "Start" and wait for it to finish and reboot, and unplug the phone after the yellow box turns green and says "PASS"
Click to expand...
Click to collapse
3. Use SuperOneClick to root the phone
1. Download SuperOneClick v1.5.5 (attached)
2. On phone, go to Options > Applocations > Development and enable "USB Debugging"
3. Connect phone to computer, open SuperOneClick, and click "Root"
4. You should see a confirmation when it's done
Click to expand...
Click to collapse
4. Flash supercurio's Stock+Voodoo kernel using Odin
A. Download the Stock+Voodoo kernel .tar for Odin
B. Open Odin, and put the kernel file in the appropriate box
stock+Voodoo-Froyo-T959D-TLJL3.tar in "PDA"
C. Boot into download mode by turning phone off, then holding "Volume Down" while connecting the phone to the computer
D. The first "ID:COM" box should turn yellow and show a numerical COM port
E. Click "Start" and wait for it to finish and reboot, and unplug the phone after the yellow box turns green and says "PASS"
Click to expand...
Click to collapse
5. Install your desired custom ROM using Clockwork Recovery
****MAKE SURE THAT THE ROM YOU WANT TO INSTALL DOES NOT HAVE A BOOTLOADER INCLUDED. IF IT DOES IT WILL BRICK YOUR PHONE. BROWSE THE .ZIP, AND CHECK THE "UPDATES" FOLDER, AND LOOK FOR "SBL.BIN" OR "BOOT.BIN". IF THEY EXIST, DELETE THEM AND REMOVE THE REFERENCE TO THEM (SINGLE LINE FOR EACH) IN THE "UPDATE SCRIPT" FILE, WHICH IS FOUND IN /META-INF/com/google/android/****
A. Place xxxxxxxx.zip (whichever ROM you are flashing) on internal sdcard
B. Disable any lagfixes (Follow step 6 to disable voodoo if it automatically enables with supercurio's kernel - this doesn't happen for everyone I don't think)
C. Reboot into clockwork recovery by holding "Volume Up" + "Volume Down" while turing on the phone
D. Select "install zip from sdcard"
E. Select "choose zip from sdcard"
F. Select "xxxxxxxx.zip"
G. Select "Yes - xxxxxxxx.zip"
H. Wait for installation to finish
I. Reboot
J. After full boot, wait roughly 10 minutes and reboot, this will smooth things out and eliminate any small bugs.
Click to expand...
Click to collapse
6. Disable Voodoo
****ONLY DO THIS IF THE ROM YOU JUST FLASHED HAS VOODOO INSTALLED & ENABLED BY DEFAULT. OTHERWISE, YOU MAY SKIP THIS STEP****
A. Reboot into clock work recovery by holding "Volume Up" + "Volume Down" while turing on the phone
B. select "voodoo lagfix"
C. Select "disable lagfix"
D. Select "go back"
E. Select "reboot system now"
F. Your file system will now be converted back to rfs. This will take about 2-4 minutes, be patient!
Click to expand...
Click to collapse
7. Flash supercurio's Stock+Voodoo kernel using Clockwork Recovery
A. Download the Stock+Voodoo kernel .zip for Clockwork Recovery
B. Place stock+Voodoo-Froyo-T959D-TLJL3-unsigned-update.zip on internal sdcard
C. Reboot into clockwork recovery by holding "Volume Up" + "Volume Down" while turing on the phone
D. Select "install zip from sdcard"
E. Select "choose zip from sdcard"
F. Select "stock+Voodoo-Froyo-T959D-TLJL3-unsigned-update.zip"
G. Select "Yes - stock+Voodoo-Froyo-T959D-TLJL3-unsigned-update.zip"
H. Wait for installation to finish
I. Reboot
Click to expand...
Click to collapse
8. Flash Telus modem
A. Place update.tljl3.modem.zip (attached) on internal sdcard
B. Reboot into clockwork recovery by holding "Volume Up" + "Volume Down" while turing on the phone
C. Select "install zip from sdcard"
D. Select "choose zip from sdcard"
E. Select "update.tljl3.modem.zip"
G. Select "Yes - update.tljl3.modem.zip"
H. Wait for installation to finish
I. Reboot
Click to expand...
Click to collapse
9. Enable Voodoo (Optional)
A. Reboot into clock work recovery by holding "Volume Up" + "Volume Down" while turing on the phone
B. select "voodoo lagfix"
C. Select "enable lagfix"
D. Select "go back"
E. Select "reboot system now"
F. Your file system will now be converted to ext4. This will take about 2-4 minutes, be patient!
Click to expand...
Click to collapse
10. Use Titanium Backup to restore all apps and settings/data
11. Recalibrate battery
A. Connect the phone to the charger with the phone powered on, and allow the phone to charge until it shows 100%
B. Disconnect the phone from the charger, and power it off.
C. Reconnect the phone to the charger with the phone powered off, and allow the phone to charge until the battery indicator shows 100% (you can use vol-up/vol-down to make the indicator come back up when the screen goes to sleep).
D. Disconnect the phone from the charger and power it on.
E. Once the phone is powered completely on, power it off again and reconnect it to the charger and make sure the battery indicator shows 100%.
F. Boot into clockwork recovery by holding "Volume Up" + "Volume Down" while turing on the phone
G. Select "Advanced"
H. Select "Wipe battery stats"
I. Reboot
Click to expand...
Click to collapse
12. Done!!!!
You should now have a 100% functional custom ROM...Enjoy.
Well, i have supercurio's kernel flashed, with voodoo enabled.
I'm not sure which step to start at to be honest.
And i flashed the custom kernel through SGS Kernel Flasher, so do i have to flash back to stock and do this process all over again?
cowvun said:
Well, i have supercurio's kernel flashed, with voodoo enabled.
I'm not sure which step to start at to be honest.
And i flashed the custom kernel through SGS Kernel Flasher, so do i have to flash back to stock and do this process all over again?
Click to expand...
Click to collapse
If you are currently running a stock ROM with supercurio's kernel, then you would jump to the part that comes after installing the stock ROM and supercurio's kernel (i.e. flashing the custom ROM). Just disable Voodoo first.
If you are currently running a custom ROM, then yes, it is recommended to go back to stock before flashing a new custom ROM. Some ROM developers have made it so that you can flash their newer versions over older versions of the same ROM, but make sure that's the case before you do so. And it's always recommended to disable Voodoo before flashing anything.
samperlmutar said:
If you are currently running a stock ROM with supercurio's kernel, then you would jump to the part that comes after installing the stock ROM and supercurio's kernel (i.e. flashing the custom ROM). Just disable Voodoo first.
If you are currently running a custom ROM, then yes, it is recommended to go back to stock before flashing a new custom ROM. Some ROM developers have made it so that you can flash their newer versions over older versions of the same ROM, but make sure that's the case before you do so. And it's always recommended to disable Voodoo before flashing anything.
Click to expand...
Click to collapse
Great Post Samperlmutar;
Just one suggestion if I may, you didn't mention to boot into clockwork AFTER you flash the final final voodoo kernel so you can enable voodoo lagfix...if you want it.
I have voodoo enable and this phone is crazy fast.
samperlmutar said:
If you are currently running a stock ROM with supercurio's kernel, then you would jump to the part that comes after installing the stock ROM and supercurio's kernel (i.e. flashing the custom ROM). Just disable Voodoo first.
If you are currently running a custom ROM, then yes, it is recommended to go back to stock before flashing a new custom ROM. Some ROM developers have made it so that you can flash their newer versions over older versions of the same ROM, but make sure that's the case before you do so. And it's always recommended to disable Voodoo before flashing anything.
Click to expand...
Click to collapse
Thank you.
Btw, why do you flash supercurio's kernel twice, on step 4 and 7?
cowvun said:
Thank you.
Btw, why do you flash supercurio's kernel twice, on step 4 and 7?
Click to expand...
Click to collapse
You have to flash it the first time to get to clockwork recovery, then when you flash the vibrant rom the supercurio kernel will get overwrited, therefore it needs to be flashed again.
roccos_van said:
You have to flash it the first time to get to clockwork recovery, then when you flash the vibrant rom the supercurio kernel will get overwrited, therefore it needs to be flashed again.
Click to expand...
Click to collapse
Wouldn't flashing other phone's roms brick our phone?
Unless the custom rom is compatible with supercurio's kernel. Not sure.
roccos_van said:
Great Post Samperlmutar;
Just one suggestion if I may, you didn't mention to boot into clockwork AFTER you flash the final final voodoo kernel so you can enable voodoo lagfix...if you want it.
I have voodoo enable and this phone is crazy fast.
Click to expand...
Click to collapse
Damn. I spent 15 minutes looking it over and I totally missed that lol. Thanks, I will put that in.
cowvun said:
Wouldn't flashing other phone's roms brick our phone?
Unless the custom rom is compatible with supercurio's kernel. Not sure.
Click to expand...
Click to collapse
No. That's why I specified to use ROMs for the Vibrant, it's virtually the same phone. They work almost perfectly even if you don't flash a Telus kernel/modem. The only consistent issues with unmodified Vibrant ROMs on the Telus Fascinate are (1) Volume buttons swapped, (2) No wireless service, and (3) USB connection causes reboot. Each of these issues are fixed by flashing a compatible kernel/modem.
Can we use themes created for Nero v5?
cowvun said:
Can we use themes created for Nero v5?
Click to expand...
Click to collapse
I haven't used any themes, but they should definitely work without any problems. Themes don't affect the kernel or the modem, and those two elements are the only things that we changed from the original Vibrant ROMs.
samperlmutar said:
I haven't used any themes, but they should definitely work without any problems. Themes don't affect the kernel or the modem, and those two elements are the only things that we changed from the original Vibrant ROMs.
Click to expand...
Click to collapse
Alright, thanks for your quick reply.
And thanks for this guide. Working great. xD
First time noob here! I have several questions regarding this install
1) I'm not so familiar with Odin. Can I use sgs kernel flasher instead?
2) If i mess up during the process, is there any method to go back to the stock?
3) Will any T-mobile vibrant rom work on telus fascinate?
4)What do they mean by remove lagfix in step 5?
Any help will be greatly appreciated!!!
wwowz said:
First time noob here! I have several questions regarding this install
1) I'm not so familiar with Odin. Can I use sgs kernel flasher instead?
2) If i mess up during the process, is there any method to go back to the stock?
3) Will any T-mobile vibrant rom work on telus fascinate?
4)What do they mean by remove lagfix in step 5?
Any help will be greatly appreciated!!!
Click to expand...
Click to collapse
1) The steps where I say to use Odin use files made for Odin, so no...they can't be used for anything else. Download Odin from the attachments and check it out. It's really easy to use and should make perfect sense if you follow the instructions closely.
2) That's what step 2 does. If you mess up at any time, you can just perform step 2 and everything will be back to stock.
3) From my experience, yes.
4) If you started from step 1, then you don't have a lag-fix installed. This is just an extra warning for those who jumped straight to installing the ROM, that might have been running stock w/ a custom kernel already (and thus may have installed a lag-fix).
Sorry for the repost XD
samperlmutar said:
1) the steps where i say to use odin use files made for odin, so no...they can't be used for anything else. Download odin from the attachments and check it out. It's really easy to use and should make perfect sense if you follow the instructions closely.
2) that's what step 2 does. If you mess up at any time, you can just perform step 2 and everything will be back to stock.
3) from my experience, yes.
4) if you started from step 1, then you don't have a lag-fix installed. This is just an extra warning for those who jumped straight to installing the rom, that might have been running stock w/ a custom kernel already (and thus may have installed a lag-fix).
Click to expand...
Click to collapse
awesome!!!!! Thanks for the answers!!!
Help! I was going through the steps everything running smoothly. I installed Nero 5 from the zip, checked reboot and now I have nothing. No download mode, no recovery, nothing!
For odin, do we have to download any .pit file?
I researched about odin articles and it seems that I need the pit file. Can anyone
help me with this? Thanks!
Ok, now that people have started bricking because they aren't making sure that what they're flashing is compatible with their phones, it's time to take a few steps back and add a little caution. For all their similarities, the Vibrant and our (Telus) Fascinates are NOT the same phone.
Before you flash ANYTHING you need to first extract and examine the update script to make sure it's not flashing a bootloader or some such thing that WILL brick your phone.
What you need to do is look at the blocks (i.e. stuff under /dev/block/) it's flashing and anything outside of modem.bin and zImage (kernel) should be a red flag telling you to stay away from this ROM. In fact, if you have any Kung-Fu skills you can just replace the model and kernel files with the Telus or I9000 ones you want to use and re-sign the zip file to keep from having to flash and re-flash.
Thanks so much, I have been waiting on this since i unlocked my phone. Let the installing begin
EDIT: My phone seems to be stuck on download mode: ODIN does not want to recognize it so I cannot flash(right word?) the Stock+Voodoo-Froyo.tar file.
EDIT: FIXED: Boot into recovery mode: VOL up + VOL down. Then click reboot with power button, then immediately hold VOL down
used oden to flash CWM. now i cant boot into android, it just keeps kicking me into CWM recovery.
anyone see this? any suggestions? would a wipe fix it?
did you flash a rom if so which one?
no ROMs, simply just tried flashing CWM via Odin
may i ask why 2.3.5?
what were you trying to do?
i am still able to get into Download mode to flash files via Odin, so i dont think all is lost. but, still just stuck in recovery. when i try to reboot it just takes me right back into recovery. i may have flashed an incorrect version of CWM which could be the cause of this problem. if that was the case, any ideas as to how i can get back into a proper boot?
xwhofarted said:
may i ask why 2.3.5?
what were you trying to do?
Click to expand...
Click to collapse
I was trying to flash CWM so i could flash a custom ROM. Had this phone forever and was just looking to try out some ROMs out there.
As long as you odin cwm none of your os is really touched.
try the cwm 4 fixed for cm7. http://forum.xda-developers.com/atta...2&d=1311907538
Now when you reboot your device the stock kernel will over right the cwm.
also make sure you put the odin file in the PDA section.
So basically flash the new cwm and try booting into normal that should get you back where you started from. 100% stock.
that link didnt work. tried searching for the thread without any luck
for some reason it truncated the link with a '...' and it thinks that is part of the hyperlink
dl.dropbox.com/u/14764513/cwm4_fixed_for_cm7-ODIN.tar <- cwm 4 fixed for cm7
thanks.. so i flashed this via odin. same problem. i start the phone. the samsung logo comes up. it disappears for a second. then it comes back up and kicks me into recovery.
weird right? any suggestions
ok then what is your endgame?
Now before you said you flashed just the CWM, may i ask why...if you did not intend to flash a rom? were you going to flash a Kernel or obtain root?
Perhaps you should try this
Download this: http://forum.xda-developers.com/showthread.php?t=1278838
It is a custom kernel.
Now Flash CWM with odin
Put battery back in [dont touch power button yet]
Hold down BOTH volume and Power all at once * Dont let go until you see Samsung Logo.
[should still be plugged into pc via usb]
You will boot into CWM
using the volume up and down-Scroll down to Mounts and storage [select it by hitting the power button]
Then scroll to Mout USB storage
~now you should be able to see your SDCard as storage on your PC, put the Kernel some where on your SD Card~
[back on your phone Then Select Unmount
Scroll to ****Go bacK***** [select]
Scroll to install zip from sd card [select]
Select choose zip from sdcard
Navigate to where you have the zip
Select it
Scroll down to Yes-Flash........
Let the phone do its thing!
Good luck!
Your bootlooped...if you can get into cwm wipe all three and flash a rom thats compatible with the version of cwm you have installed. Or odin back to stock and start over...
droidstyle said:
Your bootlooped...if you can get into cwm wipe all three and flash a rom thats compatible with the version of cwm you have installed. Or odin back to stock and start over...
Click to expand...
Click to collapse
yea i started to figure that was the case. if i flash the full odin package for EH03 via odin and that will start me at the beginning?
thanks again for everyones help.
Yes,
Keep in mind all data will be gone [except on your sd card like photos and what not]
Good Luck!
xwhofarted said:
Yes,
Keep in mind all data will be gone [except on your sd card like photos and what not]
Good Luck!
Click to expand...
Click to collapse
yes i am aware. did however make a backup of my current setup. i am stuck in recovery, but recovery still works. so i was able to make a backup and hopefully i can restore at some point. also, i had been rooted earlier and immediately made a tb backup of my apps. all is not lost
thanks a bunch guys! happy holidays ill let you know if i succeed
This may sound dumb but
make sure you are NOT hitting "reboot recovery" and you ARE hitting "reboot system now"
xwhofarted said:
dl.dropbox.com/u/14764513/cwm4_fixed_for_cm7-ODIN.tar <- cwm 4 fixed for cm7
Click to expand...
Click to collapse
the link is broken can you re upload it ?
xwhofarted said:
As long as you odin cwm none of your os is really touched.
try the cwm 4 fixed for cm7. http://forum.xda-developers.com/atta...2&d=1311907538
Now when you reboot your device the stock kernel will over right the cwm.
also make sure you put the odin file in the PDA section.
So basically flash the new cwm and try booting into normal that should get you back where you started from. 100% stock.
Click to expand...
Click to collapse
that link is broken can you upload up the tar file
I'm willing to DONATE and PAY for your time - to anyone that can put together a comprehensive set of information to assist me.
I have An At&t Galaxy Note with the 4.03 I717 UCLD3 version loaded on it. I have been toying around with rooting it, and trying to load custom roms, my head is spinning with all the posts.
I'm new, and like many people I have issues when I read the posts on this forum as there is no complete guide to load a new Root, find, and load a new ROM.
When the latest ICS was released a few weeks ago, I went to upgrade and my note will not upgrade with Kies since the counter has been tripped and it has the UCLD3 version on it.
Does anyone have the best ROM to load on the note, or can you explain in clear instructions how to get it back to 100% Stock so I can upgrade with At&t ( I'd rather not this approach, I'd love to get the junky At&t stuff off )
What I'm looking for:
1. A complete guide to root, and load a ROM that has everything the stock phone has, without the At&t bloatware ( IE: 4G, Spen support, compatible with samsung apps, keyboard etc.. )
2. A guide to bring the phone and counter back to 100% stock, so that it can be upgraded by Kies if no one can provide #1 above.
Thanks - I appreciate the help.
1. Get cwm HERE the Odin version.
2.once downloaded right click Odin and run as administrator, then click on the PDA slot and load the .tar you just got
(I'm sorry i don't have s link for Odin, shouldn't be too hard to find)
3 put phone in download mode by powering off, then holding volume down and power, then when prompted volume up.
4.connect to usb that's on a usb port in the back of the pc, no front ports or hubs.
5.when you get a yellow box with a :com: number in Odin hit start.
6a.(optional).no need to root first the Rom is rooted, only reason to root first is if you want to use titanium backup to save your apps and their settings.
For root, you'll need to find the su zip that's floating around and flash that in recovery first.
6b.(also optional)boot into recovery by holding all three buttons, both volume and power, then when you feel a vibrant let go of just the power button, go to backup and restore, abs make a nandroid backup of you're current set up.
7.go here for flappjaxxx latest stock based build.
Put that on your phone someplace you can get to without a bunch of navigating. Internal or external doesn't matter.
8.boot into recovery, go to wipe data/factory reset, then wipe cache.
9.go to install zip for sdcard, now if you put the Rom on external the top option "from sdcard" is what you want. If internal the one on bottom that says "from internal sdcard" navigate to where you saved it, then confirm the flash.
Once done, boot into your new Rom and enjoy,
Not completely complete, but your welcome.
No donation needed, but i won't refund it if you were to feel the need lol
Agreed. I switched to twrp but cwm recovery is more user friendly/common
Pm me if you have any?s
ok 1st u will need to download this Root/CWM/ODIN
you will 1st need to put your phone into downlaod mode: power off phone - HOLD VOL DOWN + POWER, once you get the screen that shows Press VOL UP to get to download Mode, (make sure you have the Samsung USB Drivers installed) plug in USB, you will see the COM port in yellow (it does not matter which port number) then click on PDA and navigate to the cwm-touch-i717-120409.tar.md5 and click on start, you will reboot and you have CWM installed that is used to install roms and other stuff (to get in to CWM when device is powered off HOLD VOL UP + DOWN and press the POWER until u feel the 1st vibrate, once you see the 1st Samsung logo, u can let go), then flash Flash Counter Reset through CWM (this will reset your count in ODIN so it will not void warranty. I then use TWRP Recovery Instead of CWM i like the GUI better, just flash with CWM.
ROMS: no as for roms i love Hybrid roms, which makes it a tablet and Phone, i love Paranoid Android you can download here in either ICS or JB, these are already rooted so no need to do all then.
Instructions on Installing ROMS:
1. once you download the roms, move to External SD
2. make a back up with CWM or TWRP, just click on back up and u r done. on TWRP make sure to click on all boxes.
3. Once backed up u will want to do a factory reset, wipe dalvic Cache (in cwm it is under advanced) and wipe cache partition. (some roms will have different instructions but mainly the same)
4. once you r done flashing the rom. reboot and u r done
To Go back to stock you will go here: STOCK ROMS for i717 just download the one u want and you just flash it through ODIN, but if you have CWM or TWRP there is really no need for #2.
Need some help here...
I flash the cwm using odin but then it restarts the phone right after. Then I turn the phone off and go into recovery and I still see the stock recovery.
What am I doing wrong?
BTW the flash count is also going up each time I do it.
Young Cardiac said:
Need some help here...
I flash the cwm using odin but then it restarts the phone right after. Then I turn the phone off and go into recovery and I still see the stock recovery.
What am I doing wrong?
BTW the flash count is also going up each time I do it.
Click to expand...
Click to collapse
Start reading on 2nd page http://forum.xda-developers.com/showthread.php?t=1766181
or here: http://forum.xda-developers.com/showthread.php?t=1775263
edit: Forgot to say you should really have searched or started a new thread then to hijack a thread that has nothing to do with your issue.
Agoattamer said:
Start reading on 2nd page http://forum.xda-developers.com/showthread.php?t=1766181
or here: http://forum.xda-developers.com/sho...se might face the same issue along the way...
Click to expand...
Click to collapse
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
nbarr7655 said:
Hello all. I have had Shostock3 for a while now and read that if you use the Siyah Kernel with it then it is an awesome combo. Well I downloaded the kernel and went to install it through CWM and now I have a big problem. I chose to reboot and install the kernel and when I did I am now STUCK at the screen that says "Samsung Galaxy S II GT-i9100" with the yellow triangle. I have let it just sit and see what it does but it goes no where. WHAT DO I DO?!?!?! HELP! Thanks all!
Samsung Galaxy S II i777
Running Shostock3
WAS running with default kernel that comes with Shostock3
EDIT: It doesn't seem that I can get into the recovery mode either. I am trying the volume button + power button combination and having no luck....
Click to expand...
Click to collapse
Which siyah did you flash. The one you want is called AJK now
122ninjas said:
Which siyah did you flash. The one you want is called AJK now
Click to expand...
Click to collapse
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
nbarr7655 said:
/Siyah-I777-v7.9b-S.zip
Is the name of the file that I tried to put on. Should I try to get the one that you stated and put it on via download mode? Because it seems that I can get into download mode but that's about it. I can't get into recovery.
Click to expand...
Click to collapse
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Phalanx7621 said:
Hold power button plus volume up and volume down, keep it held in until you boot into recovery. Recovery won't just disappear, normally people just aren't holding them in long enough or are using the wrong button combo. Let us know if you get back up and running. Also make sure when installing the siyah kernel you're following the OP directions to the letter.
Click to expand...
Click to collapse
I can't get into recovery. I simply cant. I hold the buttons, correctly might I add, and then the logo appears, then goes away and I am left with nothing but a blank, black screen. The bottom buttons aren't even lit.
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Phalanx7621 said:
Possible hardware failure on your power button or one of your volume buttons I supposed. Have you tried flashing a siyah.tar file in odin to get a.different usable recovery?
Click to expand...
Click to collapse
If you could link me a Siyah kernel that is in a .tar format I would be appreciative.
Dude do as Phalanx says. Vol up+Vol down+ Power and even after the logo goes away dont release the buttons. Recovery will show up.
Sent from my SGH-I777 using xda premium
Either that or if you get adb up an running on your computer, hook up your phone via usb and type (this is for mac, may be slightly different for other os's):
adb root
adb reboot recovery
and voila! your phone boots up in recovery!
can't get past boot screen on siyah 5.0.1
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
kurtisherzog88 said:
I spent all the time I could thinking I had this but apparently I don't!
Have AT&T Samsung i777 running the latest stock 4.1.2 that I got from Kies.
Wanted to try my hand at custom roms.
Was able to root phone using flamaroot which gave me SU ability
Bought Mobile Odin pro, downloaded Siyah .tar file and put it on SD.
Flashed it with mobile Odin.
Because I'm an idiot, I was hoping to make a rom backup after flashing.
Now, it boots "Samsung" then the Siyah screen, then goes blank.
I can get into CWM recovery but without a backup rom to restore to I'm not sure what to do.
Also, can get into Download mode which reads:
ODIN MODE
Product Name: SGH-I777
Custom Binary Download: NO
Current Binary: Samsung Official
However, it reads downloading, but I do not believe there's anything to download and it's been like this for 20 minutes
ANY ideas on what I could or should do would be GREATLY appreciated. Thanks!
Kurt
Click to expand...
Click to collapse
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
creepyncrawly said:
Where did you get the Siyah 5.0.1 in tar format? It sounds like you tried to flash a kernel that is not compiled for your phone. You need a kernel that is compiled specifically for the SGH-I777.
If that is the case, then you should be able to recover by flashing a good kernel using Odin, if you can find a tar version, or just flash the 4.1.2 stock firmware with Odin, which you can get from the Download Repository or from sammobile.com/firmware or Samsung-updates.com.
But first, since you can get into recovery, try performing a wipe data/factory reset to see what happens.
Click to expand...
Click to collapse
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
kurtisherzog88 said:
Thank you so much for helping me! First of all, I used your post, "Odin3 One-click Downloaders for Stock and Stock + Root" and was able to follow those steps to get me back to 2.3 and then I connected back to Kies to get back to stock 4.1.2. SO, I am completely back where I started a week ago, but I have a phone that works thanks to you!!
To answer your question: because I was using Mobile Odin, it only recognized .tar files and I found one on Siyah's blog (gokhanmoral) which was categorized under "sgs2 kernel".
So I'm back to the start (actually did the unrooted one so I don't even have it rooted currently). However, with all the reading I've been doing on this forum, I can't shake the desire to use a custom rom. I know I'm very much a noob and probably should make myself happy with my phone, but I wanna give it another try. I understand with my following questions if I'm posting in the wrong area and cannot have my questions answered.
Here's where I'm stuck. I know I need to make a custom recovery (cwm or twrp I'm not totally sure) before flashing a custom kernel and then rom. But I just can't figure out how to do it. When I go into recovery (holding volume buttons and power), there is not option for "backup and restore". How can I get a backup of my current rom so I can start with the other stuff?
The order as I understand it:
1. root phone
2. install cwm or twrp in order to create a backup of current rom
3. flash a custom kernel
4. flash a custom rom (that is compatible with kernel)
Thanks so much again for all your help!!
Kurt
Click to expand...
Click to collapse
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
creepyncrawly said:
OK, glad your're back to working. The Siyah kernel you flashed is for the GT-I9100, the international version of the Galaxy s2. As I said, you will need a kernel that is compiled specifically for the SGH-I777, so get your kernel from the I777 Android Development Forum.
Next, you can also use a straight zImage file with Mobile Odin. You don't have to have a tar. You can even download a ClockworkMod flashable zip file and use an archiving tool such a Win Zip or 7Zip to open it and extract the zImage from it. Then use that to flash through Mobile Odin.
You currently have the stock 3e Recovery, which does not have a backup facility, nor the ability to flash custom firmware (unless it is signed by Samsung.) So you need to install a custom kernel with ClockworkMod Recovery (or TWRP Recovery will also work.) By the way, those are just different developers versions of almost exactly the same recovery functions, so it doesn't really matter which you use.
For a kernel, go to this post in the development section and download the third of four which is titled "AJK v2.0.5 NO-SWAP Samsung." As I said above, extract the zImage from the zip and use that to flash in Mobile Odin.
Also on this phone, recovery and the kernel are not separate, they are one unit, so you install the kernel to get the custom recovery. Your steps 2 and 3 are incorrect. Remove step 2 entirely. Step 3 will install both the kernel and the custom recovery. In step 4, you can flash any custom firmware you want. They all come with an included kernel, so it doesn't matter what kernel you start with because after you flash you will have a different kernel anyway.
And finally, don't worry about backing up the stock firmware. If you mess up the flash, or soft brick the phone, you can just reinstall stock as you did before. After you have a custom firmware installed, and have your phone configured exactly the way you want it, then is the time to make a backup, because you can flash to a different custom firmware to try it out, and if you don't like it, you can restore your backup and be back to exactly where you were.
Click to expand...
Click to collapse
Wow, excellent information and I cannot thank you enough for taking the time to help me out. My last question hopefully, and I don't mean to try your patience but what is the best way, would you recommend, to root my phone? I did it with flamaroot previously but it was temporary? Thanks!
Kurt
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
creepyncrawly said:
I have no experience with 4.1.2 and framaroot since I'm running Shostock3. No one who has used that method has said anything about it not being a permanent root. Why do you think it's not permanent?
I think it will be fine. Anyway after you root you're going to install a custom kernel followed immediately by a custom firmware which will be rooted. So even if it wasn't permanent it wouldn't matter.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I read somewhere that flamaroot was not permanent. Anyway, did exactly as you said and everything is working perfectly!! I seriously can't thank you enough for working with me. Trying SuperNexus to start but this is amazing!!
Kurt
phone completely frozen
hey guys
recently i've just got a 4.4 kitkat rom for my gt-s5300 and it worked preety well.
but i've downloaded a kernel rom(NeohmKernel_v1_s5301_OhmPsy.zip) that i didn't know that it wasn't compatible with my phone and now it stucked in boot screen. i've turned it on and wait for 2 hours if maybe it will work, but the phone still stucked in boot screen.
i've tried to fix this by pressing power+up vol but didn't work
pls help. it's my only phone i've got(but i know this phone is sh*tty)
-Mamelic
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
gaurav gaba said:
try to hard reset your phone... pressing volume up+power+home buttons together... nd let me knw if it works
Sent from my SGH-M919 using XDA Free mobile app
Click to expand...
Click to collapse
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
---------- Post added at 06:07 AM ---------- Previous post was at 05:35 AM ----------
Kotkot_Mamelic15 said:
yeah i've tried but it's still stuck
it only shows the logo"GT-S5300 (SAMSUNG on bottom)" only and it's now booting
i've been stupidly downloading rom patches before(i've got android jellybean, android ICS, and android kitkat custom rom)
Click to expand...
Click to collapse
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Kotkot_Mamelic15 said:
adn yea i've forgot that i've found this thread: http://forum.xda-developers.com/showthread.php?t=1921421
fortunately i've tried to press power+down vol.+home btn and i've got this message"warning!! a custom os can cause critical problems in your phone and installed applications. if u want to download a custom os, press vol up key. otherwise, press the vol down key to cancel." and got odin3 v1.87 cuz it says that this thing will help me. but unfortunately i don't know how to use it
Click to expand...
Click to collapse
First off, this forum is not for your phone, it is for the SGH-I777 AT&T Galaxy SII, so we don't know the specifics of your phone.
Following the above procedure will put your phone into download mode, where you can flash the firmware you linked.
Since you say you don't know how to use it, I am going to post a complete set of instructions for using Odin that I wrote some time ago. Bear in mind that this is for the I777, and you will have to adjust some things to make it work for your phone. Refer to the flashing instructions in the thread you linked.
How to use stand-alone Odin3 to flash firmware:
Follow and recheck each of the following steps. Do them in order listed, as some steps are dependent on previous steps. Instructions are for Odin3 v1.85. It should work with any version of Odin, but some details, like color of items, may be different.
1.) Open Odin on the Windows Desktop.
2.) 3.) 4.) Put your phone into download mode.
5.) In Odin, you should get the yellow box under where it says ID:COM with the text 0:[COMx], and in the Message area, <ID:0/00x> Added!! where x is some number, usually 1-8.
6.) In Odin, make sure Auto Reboot and F. Reset Time are checked and all other items are not checked.
7.) Click on the PDA button. Browse to the tar file you want to install and select it so its path appears in the text edit box next to the button.
8.) Make sure the check box next to the PDA button is checked.
9.) Click the Start button.
10.) You should see the green progress bar advancing.
11.) When complete, you will get a PASS (or FAIL if unsuccessful).
If after the successful flash your phone does not boot into the firmware, then perform a hard reset. I don't know your phone, but normally you would boot into recovery and perform a wipe data/factory reset.
First, let me apologize for what I'm sure is repetition, I searched the site and could not find the step by step process that I need. So again sorry.
I have a rooted Vibrant (I think, the superuser permission icon is there, from the market I downloaded "SU update fixer" and "BusyBox"because somewhere online it said I should) I updated to froyo when it originally came out and was told I had to go back to eclair to root which I just did 3 days ago.
My problem is I can't get clockwork recovery on my phone so I can flash a rom. I've downloaded heimdall and went through the steps (when I'm in the command prompt screen I get the error that it is not recognized as an internal or external command. Also "rom manager" Google market link does not recognize my phone, so I can't just download the app directly. It doesn't even come up when I search the market on my phone.
Another question, I thought once I rooted I'd be able to delete some bloatware from the device? How do I do it? Do I need to flash a rom before I can do this?
If it helps here are the current specs of my phone:Model SGH-T959, Firmware 2.1-update1, Baseband T959uvjfd, Kernel 2.2.29,Build Eclair
Please help.
Please help!!
to the people who have read my post please help.
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Try this
rawmobile215 said:
First, let me apologize for what I'm sure is repetition, I searched the site and could not find the step by step process that I need. So again sorry.
I have a rooted Vibrant (I think, the superuser permission icon is there, from the market I downloaded "SU update fixer" and "BusyBox"because somewhere online it said I should) I updated to froyo when it originally came out and was told I had to go back to eclair to root which I just did 3 days ago.
My problem is I can't get clockwork recovery on my phone so I can flash a rom. I've downloaded heimdall and went through the steps (when I'm in the command prompt screen I get the error that it is not recognized as an internal or external command. Also "rom manager" Google market link does not recognize my phone, so I can't just download the app directly. It doesn't even come up when I search the market on my phone.
Another question, I thought once I rooted I'd be able to delete some bloatware from the device? How do I do it? Do I need to flash a rom before I can do this?
If it helps here are the current specs of my phone:Model SGH-T959, Firmware 2.1-update1, Baseband T959uvjfd, Kernel 2.2.29,Build Eclair
Please help.
Click to expand...
Click to collapse
Try this (Use method B) it works like a charm every time.
also note that you dont have to install a custom rom if you prefer not to.
if you just flash the zip and reboot to clockworkmod then your set.
this is from s15274n's guide found here: http://forum.xda-developers.com/showthread.php?t=849028
There are two options here. Choose which is best for you, before you start.
ROOT ONLY METHOD:
A – This is an update.zip (633KB) that roots your phone only. You can then install Rom Manager from the Market to flash CWR (Clockwork Recovery) and install custom ROMs.
INSTALL CLOCKWORK RECOVERY AND FLASH A ROM THAT WILL GIVE ROOT ACCESS (MY PREFERRED METHOD):
B – use the other update.zip (1.7MB) and this will flash CWR for you – allowing you to immediately flash a custom ROM.. I do this because it's faster.
1.
A: Download this update.zip file to root your phone. You plan to install Rom Manager to flash CWR and a new ROM later.
B: Download this update.zip file to flash CWR... you will need to flash a custom ROM for Root. I prefer this method.
NOW DOWNLOAD THE ROM YOU PLAN TO FLASH
2.
Copy the update.zip (and the ROM) to the INTERNAL SD (not the external SD Card). sdcard/
3.
Unplug the USB (assuming you are still connected after using ODIN)...
Hold down volume up + volume down + Power for about 9 seconds.
If you prefer, you can power off your phone, then hold in all 3 buttons to boot into recovery, I don't see the point in waiting for the phone to power off.
This will get you to a recovery menu (blue/purple text) after some yellow text.
4.
In this (the stock recovery menu) select 'Reinstall Packages'
Use volume to navigate + power to select.
5.
It will cycle a bit, you will see that yellow text again, then it will return to the stock recovery. Select Reinstall packages again.
You are now in CWR (clockwork recovery).
You can either reboot, flash your new ROM or make a backup now...
---------- Post added at 12:45 PM ---------- Previous post was at 12:43 PM ----------
testomat said:
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
heh you beat me to it.
Titanium Rules
testomat said:
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Titanium Backup rules. Finally getting rid of these pointless apps. So glad to see SIMS 3 gone!! Thanks again.
THANKS!!!
firefly6240 said:
Try this (Use method B) it works like a charm every time.
also note that you dont have to install a custom rom if you prefer not to.
if you just flash the zip and reboot to clockworkmod then your set.
this is from s15274n's guide found here: http://forum.xda-developers.com/showthread.php?t=849028
There are two options here. Choose which is best for you, before you start.
ROOT ONLY METHOD:
A – This is an update.zip (633KB) that roots your phone only. You can then install Rom Manager from the Market to flash CWR (Clockwork Recovery) and install custom ROMs.
INSTALL CLOCKWORK RECOVERY AND FLASH A ROM THAT WILL GIVE ROOT ACCESS (MY PREFERRED METHOD):
B – use the other update.zip (1.7MB) and this will flash CWR for you – allowing you to immediately flash a custom ROM.. I do this because it's faster.
1.
A: Download this update.zip file to root your phone. You plan to install Rom Manager to flash CWR and a new ROM later.
B: Download this update.zip file to flash CWR... you will need to flash a custom ROM for Root. I prefer this method.
NOW DOWNLOAD THE ROM YOU PLAN TO FLASH
2.
Copy the update.zip (and the ROM) to the INTERNAL SD (not the external SD Card). sdcard/
3.
Unplug the USB (assuming you are still connected after using ODIN)...
Hold down volume up + volume down + Power for about 9 seconds.
If you prefer, you can power off your phone, then hold in all 3 buttons to boot into recovery, I don't see the point in waiting for the phone to power off.
This will get you to a recovery menu (blue/purple text) after some yellow text.
4.
In this (the stock recovery menu) select 'Reinstall Packages'
Use volume to navigate + power to select.
5.
It will cycle a bit, you will see that yellow text again, then it will return to the stock recovery. Select Reinstall packages again.
You are now in CWR (clockwork recovery).
You can either reboot, flash your new ROM or make a backup now...
---------- Post added at 12:45 PM ---------- Previous post was at 12:43 PM ----------
heh you beat me to it.
Click to expand...
Click to collapse
Thanks a million!! I'm now running Android 4.2.2 using CM 10.1.3.
My only problem is I seem to have lost my apps/contacts/etc. I don't have android market anymore. Would you know how I can get my apps back??? I see my backups (reware) in the file section (external sd) but I don't know how to get them.
Gapps
rawmobile215 said:
Thanks a million!! I'm now running Android 4.2.2 using CM 10.1.3.
My only problem is I seem to have lost my apps/contacts/etc. I don't have android market anymore. Would you know how I can get my apps back??? I see my backups (reware) in the file section (external sd) but I don't know how to get them.
Click to expand...
Click to collapse
if you backed up with Titanium backup you'll need to restore them with that, but to do so you'll want to have the market to download titanium backup.
So to get the google apps back you'll need to flash the gapps package (Cyanogen mod doesn't include them by default)
here is the full list for all versions of android: http://goo.im/gapps
but I beleive youll want this one for 4.2.2: http://goo.im/gapps/gapps-jb-20130301-signed.zip
just reboot into recovery and flash it (no need to reflash the ROM but if you ever change roms you would flash the rom first and then the gapps package)
once you boot back into android you'll have the market back.
Thanks Again
firefly6240 said:
if you backed up with Titanium backup you'll need to restore them with that, but to do so you'll want to have the market to download titanium backup.
So to get the google apps back you'll need to flash the gapps package (Cyanogen mod doesn't include them by default)
here is the full list for all versions of android:but I beleive youll want this one for
just reboot into recovery and flash it (no need to reflash the ROM but if you ever change roms you would flash the rom first and then the gapps package)
once you boot back into android you'll have the market back.
Click to expand...
Click to collapse
Thanks again!! This seems to have worked. XDA is (slang word for sex+ing) AWESOME!!!!
Thanks to you all!!!
To all that posted on my thread thanks a lot for your patience and help.
Now stuck in cwm recovery mode 10/13/13
firefly6240 said:
if you backed up with Titanium backup you'll need to restore them with that, but to do so you'll want to have the market to download titanium backup.
So to get the google apps back you'll need to flash the gapps package (Cyanogen mod doesn't include them by default)
here is the full list for all versions of android: http://goo.im/gapps
but I beleive youll want this one for 4.2.2: http://goo.im/gapps/gapps-jb-20130301-signed.zip
just reboot into recovery and flash it (no need to reflash the ROM but if you ever change roms you would flash the rom first and then the gapps package)
once you boot back into android you'll have the market back.
Click to expand...
Click to collapse
Ok so for 3 days phone worked like a charm. Today phone turns of on its own and goes to the cwm recovery mode then stays there. I removed the battery,same thing. Bottom of recovery screen says "no file contexts". Tried wipinguser data still nothing. Please help
Now I'm stuck in recovery mode. Please help, again.
testomat said:
Read this.
http://forum.xda-developers.com/showthread.php?p=9375927
For removing apps, use titanium backup
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Ok so for 3 days phone worked like a charm. Today phone turns of on its own and goes to the cwm recovery mode then stays there. I removed the battery,same thing. Bottom of recovery screen says "no file contexts". Tried wipinguser data still nothing. Please help
Odd, I've really only seen that when you try to install a carrier ota update over a custom ROM
Flash the ROM and then the gapps files again in that order and you should be fine though you'll need to restore your apps with titanium backup again afterward.
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 01:38 AM ---------- Previous post was at 01:37 AM ----------
If it happens again you might ask someone in the thread for that ROM if it's a known issue.
Or try an alternate ROM
Sent from my GT-I9000 using xda app-developers app
I tried. Mighty Odin has failed me.
firefly6240 said:
Odd, I've really only seen that when you try to install a carrier ota update over a custom ROM
Flash the ROM and then the gapps files again in that order and you should be fine though you'll need to restore your apps with titanium backup again afterward.
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 01:38 AM ---------- Previous post was at 01:37 AM ----------
If it happens again you might ask someone in the thread for that ROM if it's a known issue.
Or try an alternate ROM
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
For about 6hrs yesterday, I tried using odin to get back to original stock(eclair) it has not worked. I get a pass each time but the phone does not reboot, at first it just relooped the vibrant screen, now vibrant screen flashes then screen goes black. When the phone is plugged in the battery icon just reloops. I noticed that when odin was done the beginning of the recovery screen had a red "data wipe failed" within the normal yellow text then it would turn off and go to the battery screen again. I've used several versions of odin none have worked. If you have any suggestions please let me know. I'm afraid it may be dead forever although I've read many posts that state that android phones are almost impossible to brick. I'm at my wits end.
Odin Issues
rawmobile215 said:
Ok so for 3 days phone worked like a charm. Today phone turns of on its own and goes to the cwm recovery mode then stays there. I removed the battery,same thing. Bottom of recovery screen says "no file contexts". Tried wipinguser data still nothing. Please help
Click to expand...
Click to collapse
I had that happen once but it was because of a lagfix.
below is a thread with someone with the same issue:
http://forum.xda-developers.com/showthread.php?p=8734352
Also below is what fixed it (it also worked for me but my issue was for sure a lagfix issue):
http://forum.xda-developers.com/showpost.php?p=8698655&postcount=150
Hopefully this helps.
luckily the Vibrant is famously hard to completely brick.
it usually just takes some trial and error to fix it.
don't give up
Didn't Work
firefly6240 said:
I had that happen once but it was because of a lagfix.
below is a thread with someone with the same issue:
http://forum.xda-developers.com/showthread.php?p=8734352
Also below is what fixed it (it also worked for me but my issue was for sure a lagfix issue):
http://forum.xda-developers.com/showpost.php?p=8698655&postcount=150
Hopefully this helps.
luckily the Vibrant is famously hard to completely brick.
it usually just takes some trial and error to fix it.
don't give up
Click to expand...
Click to collapse
Thanks again, I've been at it for a few hours now, it goes into recovery but does not respond to my power button to reboot. Also beginning screen now says 1900. As though it flashed a different version.
rawmobile215 said:
Thanks again, I've been at it for a few hours now, it goes into recovery but does not respond to my power button to reboot. Also beginning screen now says 1900. As though it flashed a different version.
Click to expand...
Click to collapse
the initial odin file you are flashing is a modified 19000 file.
if the 19000 kernel is flashed then the hardware buttons will be mixed up.
dont worry though if you got that far its good dont worry about using the power button to reboot.
just pull the battery.
then you'll need to use Odin again to flash the original android 2.1 files again.
this time it should go through and you'll be back where you started.
from there you'll need to re-root and flash the ROM of your choice.
Still not working
firefly6240 said:
the initial odin file you are flashing is a modified 19000 file.
if the 19000 kernel is flashed then the hardware buttons will be mixed up.
dont worry though if you got that far its good dont worry about using the power button to reboot.
just pull the battery.
then you'll need to use Odin again to flash the original android 2.1 files again.
this time it should go through and you'll be back where you started.
from there you'll need to re-root and flash the ROM of your choice.
Click to expand...
Click to collapse
Ok so I pulled the battery, went back into download mode and tried to flash the original android files. When I did that I ended up with the stuck vibrant screen again. or if its plugged in the battery icon just keeps restarting. I've tried several versions of odin, nothing seems to work. I just keep going back and forth flashing the 19000 and trying to flash the original 2.1. I keep ending up at the same place. Every time I go through the odin process I always get a pass, but the original files do not flash. Again I appreciate all your help, I'll keep at it for a day or so but I'm losing the bit of patience I have left.
rawmobile215 said:
Ok so I pulled the battery, went back into download mode and tried to flash the original android files. When I did that I ended up with the stuck vibrant screen again. or if its plugged in the battery icon just keeps restarting. I've tried several versions of odin, nothing seems to work. I just keep going back and forth flashing the 19000 and trying to flash the original 2.1. I keep ending up at the same place. Every time I go through the odin process I always get a pass, but the original files do not flash. Again I appreciate all your help, I'll keep at it for a day or so but I'm losing the bit of patience I have left.
Click to expand...
Click to collapse
try following the steps below, I added the links for the files you'll need (hopefully the links are working, I cant test them from work unfortunately)
note that the first odin file is an 19000 file and the volume buttons on the phone will be reversed and menu selection will not work in recovery.
if you need to reboot you can use ADB or just pull the battery.
1. Download Eugenes 'Froyo that does not brick' file. HERE
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'. HERE
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Still no luck.
firefly6240 said:
try following the steps below, I added the links for the files you'll need (hopefully the links are working, I cant test them from work unfortunately)
note that the first odin file is an 19000 file and the volume buttons on the phone will be reversed and menu selection will not work in recovery.
if you need to reboot you can use ADB or just pull the battery.
1. Download Eugenes 'Froyo that does not brick' file. HERE
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'. HERE
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
Yup, This was the order that I followed to the T. So step #7 was what got 19000 on my phone. It never errored out or rebooted just went to 19000 recovery screen and stays there. I took the battery out, put it back in, went back to download mode, I downloaded and tried to flash the True stock 2.1 and that's what got me to just a Vibrant screen. I'm not sure if my PC(windows XP) is the problem though this is the same PC I used to root and flash cyanogenmod, or if something inside the phone is messed up. I did notice during an earlier recovery the words "wipe data fail" in red among the normal yellow text. This may be the cause of the repeated bad flashes of the stock 2.1. I'll keep trying when I get off today and tomorrow but I may have to bite the bullet and get a new phone on Thurs.
rawmobile215 said:
Yup, This was the order that I followed to the T. So step #7 was what got 19000 on my phone. It never errored out or rebooted just went to 19000 recovery screen and stays there. I took the battery out, put it back in, went back to download mode, I downloaded and tried to flash the True stock 2.1 and that's what got me to just a Vibrant screen. I'm not sure if my PC(windows XP) is the problem though this is the same PC I used to root and flash cyanogenmod, or if something inside the phone is messed up. I did notice during an earlier recovery the words "wipe data fail" in red among the normal yellow text. This may be the cause of the repeated bad flashes of the stock 2.1. I'll keep trying when I get off today and tomorrow but I may have to bite the bullet and get a new phone on Thurs.
Click to expand...
Click to collapse
You might have already tried this but you might try leaving it at the vibrant logo for a good 10 minutes.
I find that when I odin back to stock it takes a bit longer than usual to boot.
If it stays stuck you might try pulling the battery and try booting to recovery (if Odin was successful back to stock it should be the stock recovery)
if it lets you into stock recovery we will at least know the odin flash worked.