Hi guys have an X10i running on the 2.2.1 froyo_Achotjan_V01.3 ROM. And been experiencing problems with sounds. All notifications including calls play as though it has been muffled. :s tried toying with the Cyanogen-mod settings as well as the general sound settings. If i make a call and put the speaker-phone on it goes fine for awhile then back to normal.
Related
Hi, I seem to be having a problem with my phone and I can't seem to resolve it. Back speaker works perfectly while playing music, playing game and watching youtube videos. Also works fine when I set a ringtone and it plays a sample. But when I receive a call instead of the back speaker ringing it is the front one that ring, yes the earpiece. I was wondering if anyone has an idea how to fix this?
I'm currently using a default android ringtone.
Using the stock JK6 Rom with the JL1 Baseband and the Stock JK6 Kernel injected with Voodoo 5.X
I can't say for sure which of these flashing caused the problem since I flashed them all one after another unable to test and detect such problem.
Thanks.
Resolved! It's a behavior of the WiFi Calling App, guess I'll have to install another one.
Issue started when flashing Passion (ICS) v5, but I have since ODIN 'ed back to stock, still broken. rooted and flashed CM7, still broken. My notification audio still works. My speaker phone during calls still works. My earpiece during calls does not work, and media audio will not play over speaker, earpiece, or bluetooth. Any help or guidance would be greatly appreciated.
Bringing back thread form the dead. I am having the same issue with my Vibrant. I bought the phone used and everything was working but now it all went out just like the OP. My earpiece does not work during calls but the speakerphone does work. Also, when using the phone for media, i.e. Youtube, the speaker does not put out any sound but during a phone call after I have turned on speakerphone Youtube media works over speakerphone. The audible touch tones and haptic feedback work during phone calls and sometimes during normal use. Notification sounds work all the time. The phone is running Eclair 2.1. I have tried resetting the phone to factory software and still no luck. Yesterday I opened the phone up and used an air can to blow out dust and it started to work but it went out again today. I am just looking to find out if this is a software issue or firmware issue? Thanks for the time and advice.
install "toggle headset2",and set the widget,you can control audio output manually
jonno92 said:
Hi everyone,
I've been running CheckROM v6 since its release and loving it. However, I'm having some issues currently with sound.
Everything was working until I changed my kernel and modem in the Kitchen. I changed to NEAK kernel and XXKI4 modem, and my sound started to play up. It didn't seem as loud as normal, and sometimes my alarm would go off but no sound would play (Alarm Clock Xtreme Paid version and free version). Also, when I open Zedge ringtones, when I am 'previewing' the ringtones no sound plays at all. I tried changing my modem and kernel (changed to Redpill + XXKI1) and there's no change.
My phone still rings and my message and Facebook notification tones work, as does my bootanimation sounds. Seems like the System sounds aren't working or something?
Any ideas?
Cheers!
UPDATE: I've downloaded Volume Control app and turned up the system and alarm volumes - and it's still not working!
Click to expand...
Click to collapse
ozzyita said:
Make a call with speaker phone on that should sort it out
Click to expand...
Click to collapse
This definitely fixed my problem instantly! However, I keep getting the issue sometimes, which is annoying because sound in some apps don't work, and my alarm doesn't go off some mornings!
I've tried different kernels and different modems and I keep running into the problem sometimes. Also, my phone lags ALOT when I'm switching between phone/speakerphone/bluetooth headset. I miss out on about 10 seconds of the conversation when I get out of my car and change from bluetooth to speaker. I'm guessing this is a related problem so was wondering if you had suggestions on how to fix it permanently?
I use my phone for business purposes so I don't want to lost 10 seconds of conversation when switching from bluetooth to speakerphone
Any help would be much appreciated!
Cheers
I think it would be better if you do Factory reset but before doing that just don't forget to BACKUP your Contacts and other valuable apps...
Hope This helps..
Hmmm I'd prefer not to if there's an easy fix for the bluetooth issue. I can switch between phone and speakerphone easily, but when I turn bluetooth on then it always stuffs up.
I think it's ever since I flashed the 'Fully Modded Phone' mod, which I've now flashed over with a different Phone mod but the issue is there still...
Anyone else have any ideas? I've reinstalled the Phone apk from the original CheckROM v6 install and I'm still getting the same issues.
Noone else is having this problem?
I'm having a similar issue...
Upgraded from checkrom v4 to v6 previously and had various issues so went back.
This time though I did a full wipe first and now v6 works fine.... except when using it in the car with my Parrot MKI9200 bluetooth car kit.
Now whenever I answer a call there's about a 2-3 second lag before the sound cuts in. Making calls works ok but there's still a lag between dialing and the phone display/audio catching up.
I'm sure if I go back to v4 again it'll be fine as that was one of the issues I had before.
I've deleted / readded the pairing etc but no effect.
Any ideas?
hmm anyone found a fix for this yet?
??
Gentlemen,
I have a T-Mobile Galaxy S III which I've rooted and installed the latest AOKP milestone, which I really like. Here's what I'm running:
Android version: 4.2.2
Baseband version: T999UVDLJA
Kernel version: 3.4.40-aokp-g4c49719-00569-g2b8fa28
AOKP version: aokp_d2tmo_jb-mr1_milestone-1
Build number: aokp_d2tmo-userdebug 4.2.2 JDQ39
Aside from the occasional random reboot, which I can live with, the only problem I have is with Skype. It won't play audio over the loud speaker on the back of the phone. Audio only comes through the earpiece which is much too quiet. Ringing, call audio, everything plays through the earpiece. In an audio-only call, you have the option to toggle between the earpiece or the speaker, but both options just play through the earpiece.
Making a normal speakerphone call (not using Skype) works great. Skype just can't seem to use the speaker. What can I do to diagnose and fix this?
I know it sounds obvious, but I gotta ask anyway. Have you checked the settings in Skype?
Sent from my GT-I9300 using XDA Premium
IRPnet said:
I know it sounds obvious, but I gotta ask anyway. Have you checked the settings in Skype?
Click to expand...
Click to collapse
Yes, I've been through all the settings and there's nothing about speaker vs. earpiece. The only option I've seen to toggle between the two is when I'm on a voice only call. However, when I've tried toggling speaker/earpiece, sound will play on the speaker for half a second then go back to earpiece.
Grassman20 said:
Yes, I've been through all the settings and there's nothing about speaker vs. earpiece. The only option I've seen to toggle between the two is when I'm on a voice only call. However, when I've tried toggling speaker/earpiece, sound will play on the speaker for half a second then go back to earpiece.
Click to expand...
Click to collapse
I'm having the same problem. In my case there is no choice of speaker in Skype at all (not within setting nor while calling). I have seen some print-screens of the mobile Skype and there was as option for switching to loud speaker/headset while talking (a blue icon with speaker/headset). However, when I'm making a call, I don't have such option. I went through all sorts of discussion, but I haven't seen any solution to this.
Resolved
Regarding the option to switch speakers during a call, it's only available during a voice call. If video is enabled, the option disappears.
It seems the issue has been mostly resolved for me. I'm not sure if the problem was with CyanogenMod or Skype. Since I couldn't find a solution in May, I just abandoned using it on my phone. I didn't pick it back up until a week ago when I upgraded to CyanogenMod 10.1.0-d2tmo and got the latest Skype app (recently released). Now everything mostly works as it should. It's still buggy, but usable.
Samsung Galaxy Grand Neo.
I was searching for this Skype Bug Fix everywhere, with no success
But today I was trying everything, and my speaker started working after I putted volume less then have.
So by putting lower volume it works on my Samsung Galaxy Grand Neo (GT-I9060)
Hi, I'm having a strange problem not hearing anything in loud calls.
The scenario is following: I dial the number, the other party picks up (or the other way round), I switch to loud speaker and...can hear nothing (neither from the earspeaker, nor from the loudspeaker). Microphone works normally as it should in the loud call - the other party hears fine. Normal calls (not loud ones) also work fine. Speaker itself is also working - ringtones, music are played.
I'm on the newest AOSP Neatrom 8.0st (KK 4.4.4) and Apolo Kernel 7.1. No other issues so far.
I'm quite new to custom ROM/kernel flashing, also I only recently got my hands on Samsung GII. Sorry if this is a stupid question. No reasonable search effort gave me good results. I'm asking this before I ruin my successful combination of ROM/kernel flashing another ones.
Thanks. Martin
Ok, problem solved by clean re-flash of ROM and kernel.
Still I would like to understand where the problem could have been. Just if it reappears...