Related
hey guys, please i need alotta help.
i have the samsung vibrant obviously.
this is what my current situation is. im stuck at the phone to computer screen, and the only thing i can do is get into download mode. but when i try to load the stock vibrant rom using odin, it just stops at dont turn off target! the phone does indeed connect to odin so that's not the problem, but when i click start to flash the stock rom, it just stops at dont turn off target! i cant figure out why it wont flash the rom, and i have no idea what to do, please help! :[
this what i did that caused this. i had the oneclicklagfix installed from ryan. i then uninstalled the lagfix because i wanted to flash the bionex 1.3 rom. it seemed like it was flashing all fine, and then it booted up to the phone to comp screen! :[ like i said, i can only get into DL mode, and then odin doesnt do anything. i tried deleting all user data, and cache data. please help me, i dont know what to do! thanks alot!
Make sure you have the drivers for you phone and have the latest version of odin. I know it took me at least 3 to 4 tries with the old version of odin 1.0. The new version 1.3 went through on the first try.
speoples20 said:
Make sure you have the drivers for you phone and have the latest version of odin. I know it took me at least 3 to 4 tries with the old version of odin 1.0. The new version 1.3 went through on the first try.
Click to expand...
Click to collapse
I can attest to this. V1.0 kept having issues for me, so I downloaded V1.3 and had no issues. If you install Samsung Kies it should install all the drivers you need on your computer to communicate with your phone. If you still can't get it flashed back to stock try flashing this ROM first: http://forum.xda-developers.com/showthread.php?t=740558 and than flashing the stock ROM.
Try using a different USB port. I had the same issue "stuck on do not turn off target" while odin was using com4. When odin switched from com4 to com5 it completed in about 5 minutes.
Ok, I was restoring my phone to stock with odin following these stpes
Disable Voodoo
Odin to eugenes froyo that wont brick
sticks at vibrant screen
tried odining to JFD
odin completes but still hangs at the vibrant screen
I have tried with and with out repartition checked and I am able to enter and exit download mode freely, I have tried 3 differnt versions of odin and 2 different downloads of the pda and pits. Any help would be great.
EDIT, Odin is finishing at the pass stage when the phone attempts to boot Currently flashing the JI6 seeing if it works.
Still not getting anywhere, I have now tried to odin to eugenes froyo, JFD, JI6, all which end the same with out a boot screen, I can get download but no recovery.
From my understanding when you flash eugenes froyo that wont brick the boot animation should change to the international one, mine has not done that so I am starting to wonder if there is an issue with the flashes themself.
How long did you wait after flashing the stock firmware? The first boot usually takes a while after an Odin. Did Odin finish flashing everything to the point that it said restart in blue?
You can find instructions to revert to stock http://forum.xda-developers.com/showthread.php?t=734475
I've gotten myself out of some pretty bad "bricks" with JFD and ODIN... make sure you also use the stock .pit file and you can check repartition, use JFD and should fix you right up.
I have waited for 10-15 minutes after it says restart and then sometimes after it says pass, and I have done to jfd and stock pit.
left phone at boot fell asleep woke up hr or so later still at vibrant screen, still cannot access recovery but can access download mode.
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
iynfynity said:
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
Click to expand...
Click to collapse
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
ionic7 said:
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
Click to expand...
Click to collapse
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
iynfynity said:
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
Click to expand...
Click to collapse
Yes read the first post it says what i have flashed.
Charlie Brown said:
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
Click to expand...
Click to collapse
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
ionic7 said:
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
Click to expand...
Click to collapse
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
ionic7 said:
Yes read the first post it says what i have flashed.
Click to expand...
Click to collapse
try that again.
Sent from my SGH-T959 using XDA App
Im having the same issue with, "Data Wipe Failed" and have 0.00 space in Application storage but my phone reboots into eugenes 2.2 perfectly fine and works, but the application storage seems to be empty still...very frustrating.
cvibe88 said:
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
Click to expand...
Click to collapse
have changed usb cord, port, computer, have flashed jfd ji6 froyo that wont brick, 512 pit,513 pit,and they have not laughed at me in anyway they are sending my new phone now and a g2 to try out soo either way I have something soon. I also was going from axura to stock to a custom rom not from one to the other and I do know how to use odin, I know what I am doing just need help figuring this one out has to be something im missing or its just not gonna work. 50 odins and nothing kinda says it all.
I am in the same boat.. tried ODIN + stock ROM from various sources, nothing seems to work.. am I out of luck ??
so im trying to help my cousin out he wanted me to return his phone to stock because he was having issues with mms and gps. it was on one of the bionix roms i cant remember which version thou. so i was reading all this morning trying to figure out the best way to unroot and odin seemed to be the easiest. i followed this guide (http://forum.xda-developers.com/showthread.php?t=734475) and everything went perfect and when the phone began to boot it showed the 3 boot screens (samsung vibrant, pink stick together, then the blue one with the lil jingle that says galaxy s) and then the screen just goes black and nothing happens.. i have to take the battery out and i can still get into download mode and the android system recovery but idk what to do. ive tried redoing odin back to stock but always the same outcome. for the past 2 hours ive been non stop searching but cant find anything that will help if someone could shed some light on what i need to do that would be awesome. ty
I'll grab the link in a minute and post it for ya. You should try flashing eugene's froyo that doesnt brick via odin, let it reboot to recovery. Pull the battery, boot back to dl mode, then flash the stock jfd via odin selecting repartition the last flash. Be sure you can get to dl mode with the volume button- plug in usb method before flashing the froyo that doesnt brick, you'll need to boot back to dl mode that way after the battery pull.
Edit: http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
Hope it helps
Sent from my Loki powered Vibrant on the XDA App
When the phone is rebooting how long does the screen stay black, after the first boot of changing a kernel or any system files the dalvik cache needs to be rebuilt and can take some time (upto 5 minutes) on the first boot. My suggestion is to make sure and use jfd tar file and 512 pit file and then just let the phone sit for about 15 minutes after odin says pass. Once you get a pass from odin the phone is going to work unless something in the tar or pit files was damaged. Just let the phone sit and all should be well.
thanks for the quick replys im going to try both suggestions now and ill get back to u when i find out if they work
Br1cK'd said:
I'll grab the link in a minute and post it for ya. You should try flashing eugene's froyo that doesnt brick via odin, let it reboot to recovery. Pull the battery, boot back to dl mode, then flash the stock jfd via odin selecting repartition the last flash. Be sure you can get to dl mode with the volume button- plug in usb method before flashing the froyo that doesnt brick, you'll need to boot back to dl mode that way after the battery pull.
Edit: http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
Hope it helps
Sent from my Loki powered Vibrant on the XDA App
Click to expand...
Click to collapse
+1 this is the sure way to solve this problem
well thanks for both replys Br1ck'd ur method worked his phone is now back on stock! just one last thing how should i go about updating it to the latest stock rom. when i hit software update it says nothing is available. i know there is a newer eclair update but since i dont have a vibrant im not to sure what the latest is. i see there is a froyo update out there but has tmobile released an official that i can load on there for him? and how will i go about getting it?
dylan6879 said:
well thanks for both replys Br1ck'd ur method worked his phone is now back on stock! just one last thing how should i go about updating it to the latest stock rom. when i hit software update it says nothing is available. i know there is a newer eclair update but since i dont have a vibrant im not to sure what the latest is. i see there is a froyo update out there but has tmobile released an official that i can load on there for him? and how will i go about getting it?
Click to expand...
Click to collapse
The only official 2.2 we have for the vibrant wasnt released as an ota. You can snag it through Kies or KiesMini, but it was my understanding that it messed up some peoples sd cards. If youre looking for 2.2, and you want it as stock as possible, your best bet is to dl and flash one of Whitehawkx Ka6, KA7, or KB1 roms in the developement forum. My Loki build is 2.2, but far from stock, and we have a bunch of roms out here that are going to run better than any ota update.
Sent from my Loki powered Vibrant on the XDA App
Br1cK'd said:
The only official 2.2 we have for the vibrant wasnt released as an ota. You can snag it through Kies or KiesMini, but it was my understanding that it messed up some peoples sd cards. If youre looking for 2.2, and you want it as stock as possible, your best bet is to dl and flash one of Whitehawkx Ka6, KA7, or KB1 roms in the developement forum. My Loki build is 2.2, but far from stock, and we have a bunch of roms out here that are going to run better than any ota update.
Sent from my Loki powered Vibrant on the XDA App
Click to expand...
Click to collapse
+1 Loki Rules
Well, first off, I FINALLY ROOTED !!!!!!.....samsung fascinate.I500...2.2.2.....edo5.........rooted with SIMPLE ONE CLICK.......... achieved SUPER USER........downloaded ROM MANAGER........however.......when i try to flash ANY rom, i get error msg " FAILED TO VERIFY WHOLE-LIFE SIGNATURE".....". SIGNATURE VERIFICATION FAILED "....
"INSTALLATION ABORTED"
ANY IDEA WHY I GET THIS ?..........thanks.Dennis
Flashing or installing a recovery on a stock kernel gets reset at boot. You need to flash recovery (cwm) in odin with battery out, insert batt and 3 finger into recovery and flash a custom kernel to get recovery to stick.
good day.
???
hi, and thanks for reply........im sorry but im obviously newbie. can you give advice on how exactly i can acheive your suggestion ?.......i dont know what ODIN is or even how to do this
thanks
dennis
What exactly are you trying to flash? Or what rom are you looking to be on?
good day.
well, like i said, im newb, so i tried the ROM MANAGER app.......and it lists only a few ROMs. but any i try i get same error.
btw, i would like to be on Cynogen, or fresh
Don't really recommend Rom Manger...
-Download Odin.
-Download CWM4 fixed for CM7... HERE. (Bottom of JTs post)
-Copy the ROM you wish to use onto your SD card anywhere.
-Open Odin
-Phone off, remove the battery, hold down volume button, plug in USB cord
-Should go into download mode, shown on the screen of your phone, and show show up as connected in Odin.
-Using PDA Button (Never use phone button in ODIN!) flash the CWM4 for Odin file you downloaded. DON'T do anything until it says success, finished done, etc, just don't stop mid flash. Shouldn't take that long, and your phone should turn back off.
-Reinsert the battery, do the three finger recovery (DO NOT let the phone boot back up otherwise you'll need to reflash recovery)
-Choose install ROM from SD card, choose the rom, CM7 or whatever you downloaded, and flash it.
-Now that's going from memory, so it might not be exactly "install rom from sd card", I think it actually says "install .zip from sd card" or something like that but you get the idea.
- I would recommend backing up all your data, and then wiping cache, dalvik, and data before flashing a new ROM.
- If going to CM7, MIUI, OMGB OMFGB, VGB, etc, any 2.3 based rom you'll want to ODIN the GB_Bootloaders too.
Superoneclick has had problems on 2.2.2 ed05. If you odin the stock ed05 package from pentafive, you dont need to flash a modified kernal to get cwm to stick! Also there is no need to root if your installin a rom, it will already be rooted. My suggestion is to start with powerwashed 1.2 rom get familiar with what you are doing before messing around with mtd gingerbread roms.
Here is directions http://forum.xda-developers.com/showpost.php?p=16566628&postcount=285
odin ?
well my problem is im newbie lol...........i dont know what ODIN is, nor do i know how to flash PENTAFIVE package..........i realize im being a PITA on these forums, but i really need someone to step-bystep me thru this
icemanwbs said:
well my problem is im newbie lol...........i dont know what ODIN is, nor do i know how to flash PENTAFIVE package..........i realize im being a PITA on these forums, but i really need someone to step-bystep me thru this
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1053567
http://forum.xda-developers.com/showthread.php?t=1124391
http://forum.xda-developers.com/showthread.php?t=1013312
Sent from my SCH-I500 using XDA App
icemanwbs said:
well my problem is im newbie lol...........i dont know what odin is, nor do i know how to flash pentafive package..........i realize im being a pita on these forums, but i really need someone to step-bystep me thru this
Click to expand...
Click to collapse
click the link and read!!!!!!!!!!!!!!!!!!! This is all the step by step instructions you need. The link efan450 is good too, but the link I posted has everything you need right there!!!!
icemanwbs said:
btw, i would like to be on Cynogen, or fresh
Click to expand...
Click to collapse
If you don't have any clue what ODIN is, or what CWM is, or even how to spell Cyanogen correctly, you have no business at all even thinking about being on CyanogenMod 7. Have to learn to crawl before you can walk before you can run. Read the stickies, read the stickies again, read the stickies again, know what you are doing and understand what you are doing before doing anything to your phone, then start simple with a debloated/deodexed stock rom or powerwash ED05.
+1
There's no trick or magic or easy fix for rooting. Its all about experience. Once you've flashed 20 ROM's+...you'll understand!
I know that some of these are 150+ pages long, I KNOW...I've read them all! Trust me when I tell you, each page is money!
You've got an amazing machine, go read some of the ROM postings and learn the lingo, the steps, the problems and fixes. then root your fascinate.
You'll be glad you did.
sent from outerspace
Root and Rom completed. Special thanks to droidstyle. Powerwash working very smooth.
Sent from my SCH-I500 using XDA App
I was using this thread to flash my phone until I got to flashing a custom ROM.
Every time I try to flash a new rom, CWR gives me a Status 7 error and doesn't complete.
I try to put my phone to stock every time but it does not seem to work.
Note: if it helps, I cannot seem to unmount my USB
TechActivist said:
I was using this thread to flash my phone until I got to flashing a custom ROM.
Every time I try to flash a new rom, CWR gives me a Status 7 error and doesn't complete.
I try to put my phone to stock every time but it does not seem to work.
Note: if it helps, I cannot seem to unmount my USB
Click to expand...
Click to collapse
Have you tried to use ODIN to flash your phone back to a working ROM?
Also, be sure to flash the right ROM.. Verizon Fascinate and Telus Fascinate are 2 different phones..
Well... now theres a problem as ODIN won't see my phone in download mode. :/
Reinstall your USB drivers, and see if your cable is seated properly. If you can get into Download mode, most cables used will allow Odin to recognize. You may have to Odin back to a different ROM like Neo said.
Make sure you have the latest version of Odin
JJ5150 said:
Reinstall your USB drivers, and see if your cable is seated properly. If you can get into Download mode, most cables used will allow Odin to recognize. You may have to Odin back to a different ROM like Neo said.
Make sure you have the latest version of Odin
Click to expand...
Click to collapse
Tried it , didn't work. Reinstalled drivers, new files, new cable nope.
I can flash the i9000 kernal, and then clockwork recovery gives me a STATUS 7 error when I try to install a rom.
EDIT: seems like clockwork cannot unmount my internal sd card. hmm...
TechActivist said:
EDIT: seems like clockwork cannot unmount my internal sd card. hmm...
Click to expand...
Click to collapse
did you try yanking the card and cleaning it with alcohol? might work.
when all else fails, odin back to stock and start over.
How to unbrick...
http://forum.xda-developers.com/showthread.php?t=1026746
http://forum.xda-developers.com/showthread.php?t=1288162
JJ5150 said:
did you try yanking the card and cleaning it with alcohol? might work.
when all else fails, odin back to stock and start over.
How to unbrick...
http://forum.xda-developers.com/showthread.php?t=1026746
http://forum.xda-developers.com/showthread.php?t=1288162
Click to expand...
Click to collapse
Did it over and over man.
It won't install any ROMS, kernals sure, not zips. If anything, everytime I try to unmount USB in Clockwork Recovery, it blinks and goes back to the previous screen.
Any ideas?
EDIT: The phone now won't get past the bootloader. Cannot get into Clockwork Recovery
when you flash back to stock with Odin... are you using all the fields in the screenshot on that link? eg. Pit, pda, phone, csc or just pda?
because I only use pda and flash the stock .md5 file. i'm out of ideas man... I'm kinda n00b at this myself, just bumping to maybe get a someone's attention.
JJ5150 said:
when you flash back to stock with Odin... are you using all the fields in the screenshot on that link? eg. Pit, pda, phone, csc or just pda?
because I only use pda and flash the stock .md5 file. i'm out of ideas man... I'm kinda n00b at this myself, just bumping to maybe get a someone's attention.
Click to expand...
Click to collapse
Every single file, I use to precisely.
It seems like Clockwork recovery just doesn't like me.
I keep bringing this up but I cannot unmount USB storage in Clockwork. Does this mean anything to anyone?
TechActivist said:
Every single file, I use to precisely.
It seems like Clockwork recovery just doesn't like me.
I keep bringing this up but I cannot unmount USB storage in Clockwork. Does this mean anything to anyone?
Click to expand...
Click to collapse
So can you get into download mode and use ODIN to flash or not?
Are you still stuck at bootloader? Please be as descriptive as you can.
And no, I never heard of "cannot unmount USB storage" CWM... I've heard of mounting issues, but not unmounting...
IMHO, I think your best option here is to get ODIN working, then flash to a stock ROM with stock Kernel with PIT (Repartition) then flash CWM 2.5.
I dont see why you would need to unmount? what you can do is remove the battery cover remove the sd card. with the battery still out plug the phone into your usb and hold the volume down button. does it go into download mode then?
Then can Odin see your phone?
Also worst case try a different PC all together.
Are you on VZW or Telus?
I can get into download mode and use ODIN yes.
I am no longer stuck at the bootloader and can boot into stock froyo with ODIN.
I use ODIN to flash stock ROM and kernel, and everytime I flash back CWM 2.5. It won't let me install any ROMs. It gives me a status 7 error and aborts.
CWM just won't work
In case you didn't know, CWM can mount USB just like android so I don't have to boot into the OS to place a file. under mounts>mount USB storage>Unmount/Mount
Everytime I press unmount, the screen blinks and takes me back to the previous screen.
This is a Telus Fascinate.
I had a similar problem. Turns out my USB cable was culprit. Several others have had similar problems. Try a different USB cable.
Sent from my SCH-I500 using XDA App
TechActivist said:
In case you didn't know, CWM can mount USB just like android so I don't have to boot into the OS to place a file. under mounts>mount USB storage>Unmount/Mount
This is a Telus Fascinate.
Click to expand...
Click to collapse
Oh i am aware of the Feature, what i was saying is it shouldnt affect flashing a rom.
also one thing i noticed is your using an older CWM, which rom are you trying to flash? If it is an MTD like CM7 then you should use the cwm 3 or 4 fixed for cm7
Check section 3 http://forum.xda-developers.com/showthread.php?t=1238070
xwhofarted said:
Oh i am aware of the Feature, what i was saying is it shouldnt affect flashing a rom.
also one thing i noticed is your using an older CWM, which rom are you trying to flash? If it is an MTD like CM7 then you should use the cwm 3 or 4 fixed for cm7
Check section 3 http://forum.xda-developers.com/showthread.php?t=1238070
Click to expand...
Click to collapse
Tried the fix, ODIN starts and then fails in the middle saying NAND write failed.
What could this mean? ODIN fails to install the fix :/
Tried a different cable, so cable is not the issue here.
Can we get one thing straight here though? The phone is not bricked as I can get into ODIN and flash what seems to be only stock files?
As long as Odin can see it you can always go to stock. As long as Odin is ok there is hope.
As i have a Verizon Fassy, I may not be much more help.
Worst case find a Tellus Rom that you can Odin and do that.
Good Luck
xwhofarted said:
As long as Odin can see it you can always go to stock. As long as Odin is ok there is hope.
As i have a Verizon Fassy, I may not be much more help.
Worst case find a Tellus Rom that you can Odin and do that.
Good Luck
Click to expand...
Click to collapse
Thanks
But any idea as to what would cause a NAND write fail? is the NAND locked or something?
So anyone have any idea?
TechActivist said:
So anyone have any idea?
Click to expand...
Click to collapse
My brothers dell 14 XPS can't ever flash in ODIN to him phone. Always has to use someone else's computer.
So I suggest you try another computer. Changing ports WONT do anything, neither will cables.
Have you tried heimdall instead of Odin?
Sent from my CM7 glitch'd fassy