With my folio 100 with an updated Dexter ROM (1.4*), it wakes up regularly (I would say about each 15 minutes). This make the battery life VERY short.
Does anyone have the same problem?
Does anyone have a solution for that purpose?
Best regards.
RaiFolio
Looks like it´s a nvidia problem, i have the same issue every now and then.
Response from dexter:
its a hardware bug, see Nvidia site on harmony development boards and tango.. they confirm they did not fix the issue.
Im having that problem too, so we currently dont have any solution?
Sent from my Folio 100 using XDA Premium App
nightmarept said:
Looks like it´s a nvidia problem, i have the same issue every now and then.
Response from dexter:
its a hardware bug, see Nvidia site on harmony development boards and tango.. they confirm they did not fix the issue.
Click to expand...
Click to collapse
I am not fully convinced that it is a hardware problem. My folio wakes up with all roms that are based on the stock rom. But I did not have a single wakeup with CM7.
I would rather blame the Nvidia drivers (ressource manager?) than the hardware itself for the wakeup bug (except that it may be that the wakeup is a dirty workaround for another hardware problem).
Hello,
I also had that problem at first, then I went in the wifi settings, pressed the menu button to bring up advanced seetings, set the wifi sleep policy to never and then disabled wifi and gps in the Location & security settings.
That seemed to work for me, it might not work for others...
Regards,
Luis
Thanks Nyaria, i will try today if that works
Sent from my HTC Hero using XDA Premium App
I'll try it too.
Didnt work
Sent from my Folio 100 using XDA Premium App
Ok, I also removed a lot of apps that I don't need, I'll make a list of what's remaining and maybe the problem is with just one app.
I just finished a standby test with Foliomod 1.4 and got near 30 hours of standby with light email usage... not bad
Regards,
Luis
hello
for the problem of waking up the solution is to leave the wifi constantly under foliomod 1.4
if your portfolio suffers from freezing after waking up to SetCPU mini max 1000 604
but also
I have tried the ROM Mblaster very very very good work fluid
The main problem is that the wifi does not reconect
J So I installed the second version of max 1000
It is less fluid, but the wifi works well, but back then SOD j've given SetCPU mini max 1000 and 604 more problem
If you can solve the problem of wifi I am ready to test because my portfolio suffers whenever SOD
thank you for your very good work
sod negative return
ROM handed CyanogenMod 7.0.0 Oc 1500 with a 1000 SetCPU
and shutdownquick
can it be the folio buttons?
with my folio the screen wake's up and the search button flashes.
also wen i am working with it then the google search pops up
i tried deinstall the google search app but no effect on my broblem.
sorry for the bad english hope you guys can read it
I'm so thankful for this thread, cos the wifi advanced setting trick has worked for me!
my foliomod kept turning itself on every 60 secs (can you believe it), after it turned it off, and it was irritating me no end. now it stays off once i set the wifi policy to never.
thanks!
After few month there isn't solution for it ?
I think that problems is that folio search wifi network on every x seconds. That can be changed in build.prop file.
Sent from my IDEOS S7 Slim using XDA App
Jon2555 said:
I think that problems is that folio search wifi network on every x seconds. That can be changed in build.prop file.
Sent from my IDEOS S7 Slim using XDA App
Click to expand...
Click to collapse
I tried to turn off wifi but nothing change.
Try PowerSwitch app
Sent from my IDEOS S7 Slim using XDA App
Jon2555 said:
Try PowerSwitch app
Sent from my IDEOS S7 Slim using XDA App
Click to expand...
Click to collapse
Just installed, i try it!
stex_80 said:
Just installed, i try it!
Click to expand...
Click to collapse
No good, same result,... have you a best software setting to suggest me?
Turn on acceleration sensor and lock app in memory. When Folio screen turn on, after ten seconds it will turn off
Sent from my Xoom using Tapatalk
I had this issue with the honeycomb rom, v0.4 , turning back to foliomod 1.4 now all work good, but i can't turn off wi-fi during the screen-off, cause the wi-fi took a lot of time to take the network. I noticed that with honeycomb the "back" button was glowing and then the screen power up in lock state...maybe the problem could be folio button...
Related
Hello together,
at first: sorry about my english
since today i get touchscreen settings
despite the fact that everything worked, it suddenly appears as of today.
but also between the normal operation can not use my touch screen
sometimes i need 10-20 few times more than 30 tries to get back in system...
im on blanc build actually
i have testet this builds (today only!!!)
Mdeejay FroYo HD v.3.7 (this is actually on my card)
Mdeejay FroYo HD v.3.6
Mdeejay Froyo Sense v. 2.4.2
Mdeejay_eVo_Sense_v._1.8
Mdeejay_eVo_Sense_v._2.0
this programs are installes by default on first installation:
Superuser, root explorer, es file explorer, gscript lite
actually im on 7.6 - kernel
Radio Rom: 2.15.50.40 (but i have tested the 14 too)
the deactivation of my G-Sensor with the known script wont work too
i have tried to format my sd cards, u tried 3 cards, that cant be the problem there...
please help me *cry* i wont go back to wm6.5
soundclub said:
Hello together,
at first: sorry about my english
since today i get touchscreen settings
despite the fact that everything worked, it suddenly appears as of today.
but also between the normal operation can not use my touch screen
sometimes i need 10-20 few times more than 30 tries to get back in system...
im on blanc build actually
i have testet this builds (today only!!!)
Mdeejay FroYo HD v.3.7 (this is actually on my card)
Mdeejay FroYo HD v.3.6
Mdeejay Froyo Sense v. 2.4.2
Mdeejay_eVo_Sense_v._1.8
Mdeejay_eVo_Sense_v._2.0
this programs are installes by default on first installation:
Superuser, root explorer, es file explorer, gscript lite
actually im on 7.6 - kernel
Radio Rom: 2.15.50.40 (but i have tested the 14 too)
the deactivation of my G-Sensor with the known script wont work too
i have tried to format my sd cards, u tried 3 cards, that cant be the problem there...
please help me *cry* i wont go back to wm6.5
Click to expand...
Click to collapse
It seems to be a hardware problem rather than software or Android problem Did you remember if your HD has fallen in the last days? Try to make it work in Windows or try to hard reset your Phone if everything goes wrong. Maybe you are lucky. With my previous phone I had similar problems.
it isnt a hardware-problem, in windows mobile is no problem, i have tried the last 30 minutes without freeze
and no, my hd2 has not fallen, till yesterday 5 pm were everything ok, without any freeze in last months
I get that occasionally too. I have just reported sometimes as many as 3 times before it behaves.
Sent from my HD2 using XDA App
me too
happens to me too, from time to time.
freeze last about 2 secs max.
Im using evo kernel (20?, oct) and the android 2.2.1 build.
okay....it was a silent death of my TS ...
now under windows mobile wont work too (with original wm build...)
i wrote htc support for repair/change of the phone...i hope they will answering fast *cry*
iAm also having this problem, iThought it was my android build at first but iTried a different one and it still continued to freeze. Then iUsed wmo for a whole day and the freezing attacks continued.
I am having the same problem myself!
Whenever I use the red power button, whether it is for waking up out of standby or using a long press to activate the Phone Options menu, the touch screen stops working.
I have found that waking up the phone, then quickly putting it back to sleep and waking it up again gives me about a 90% chance of it working. So I have to press the power button 3 times in quick succession to wake up my phone now.
I hope I won't have any serious long term effects on my phone, but I'm definitely going to be talking to HTC and T-Mobile about this soon.
it happenned with me also when im using 16 gb memory that come from the phone. but when im using smaller one (8gb class 2), it work fine. maybe 16 gb took long time to read.my suggestion try it with smaller capacity or you can buy new one with higher class(6 or maybe 10)
joeispopular said:
iAm also having this problem, iThought it was my android build at first but iTried a different one and it still continued to freeze. Then iUsed wmo for a whole day and the freezing attacks continued.
Click to expand...
Click to collapse
Most annoying posting style ever.
iRecommend selling your HD2 and buying an iPhone.
Have you wifi on ? If I use wifi or wifi hotspot then after the phone wakes up I always get a touchscreen freeze it's definitely not the hardware.
Tried G sensor fix? i.e. editing AK8973Prms.txt
This has something to do with android on the hd2 eventually causing it, I work for tmo n see all the issues with the hd2 n this has never been an issue so I thought it was just me when it happened to me I just exchanged my hd2 and its fixed but now I see more people having the issue n the only thing thats common is we use android
Sent from my GT-I9000 using XDA App
apallohadas said:
Most annoying posting style ever.
iRecommend selling your HD2 and buying an iPhone.
Click to expand...
Click to collapse
iRecommend for you not to replay if you dont have a solution to the problem at hand.
I think it's due to the G Sensor. I have meet this before and have some test on my HD2. I found that if some application running on G Sensor, it may cause the freeze, ie GPS, Google Map， Compass. I am not sure this is due to my setting.
I shut down the G Sensor by Gscript and the script below found in XDA and seems this help. I hope this can help you too.
1. Create a script name 'Stop'.
SU is required, input
mv /system/bin/akmd /system/bin/akmd2
killall akmd
save this script and run, it will shut down the G Sensor.
2. Create a script name 'Start'
SU is required, input
mv /system/bin/akmd2 /system/bin/akmd
/system/bin/akmd
save this script, and you can run this to restart the G Sensor while u need it again.
I dont' know whether there is some widget or application to control the G Sensor better, but you can try this first to check if G Sensor cause this problem.
I found if shut down G Sensor, the GPS won't work. If anyone have idea how to make GPS work without G Sensor please advice.
apallohadas said:
most annoying posting style ever.
Irecommend selling your hd2 and buying an iphone.
Click to expand...
Click to collapse
hahahahahahahahahhahahaha
Turn your WIFI off then put it to sleep, works for me 100% of the time.
Same problem here. All ROMS based on HTC Sense freeze. Press the turn off button once and wait for 5 or 10 mins, and then the phone doesn't come back from lock anymore. This issue doesn't seem to be happening with any Nexus one Roms.
I have tried all possible solution, WM roms change, SetCpu, etc...
Jade.N said:
Same problem here. All ROMS based on HTC Sense freeze. Press the turn off button once and wait for 5 or 10 mins, and then the phone doesn't come back from lock anymore. This issue doesn't seem to be happening with any Nexus one Roms.
I have tried all possible solution, WM roms change, SetCpu, etc...
Click to expand...
Click to collapse
If press turn off button while it's freeze, it's hard to come back from lock. While it's not freeze, press any key while the phone is locked, if the screen is not come back, I still can touch the screen and the unlocked screen will be come back again.
I think it's a problem that the screen won't turn on immediately after we press the button, but at that moment, the phone can receive our control by touch the screen. If it's freeze, touch screen is not work, so keep dark. But if it's not freeze, the screen will be on. So I think it's the problem to solve the freeze problem.
HD2 t9193 touchscreen repair
Anyone know where I can buy this part?
Am I the only one having problems with the Proximity Sensor on the Atrix? I can't seem to get it to kick in when on a call. I have already dial-toned a couple of people when talking on the phone. I have tried covering up the sensor by placing the palm of my hand over the to 1/2 of the phone and it never kicks in.
Can someone verify for me that it does work and not some software bug.
Thanks,
Ed
Did you ever find the problem? My proximity sensor has stopped working also.
i am having an issue with mine too. at first i thought it was an issue with the screen not coming back on, but now i realize that the proximity sensor is not turning off the screen at all and my screen is just turning off when the screen timeout value is reached.
my phone is rooted, i have used titanium backup to freeze some of the apps associated with blur, and i have installed the hack to use webtop mode. can others that have this issue confirm if they are running stock or modified software?
***EDIT***
http://forum.xda-developers.com/showthread.php?p=12035170#post12035170
Any of you guys ever find a fix for this? I just noticed that mine is not working anymore either. It's rooted using aRoot but it was working for a while and now it doesn't anymore. I have another couple of days to exchange in store if I want to if it's a phone issue.
Crap, I'm having the same issue now too -- was working fine since I had it, but this occured just today, Day-2 of using 1.5.7 .... wonder if it's related ...
Crap, I'm having the same issue now too -- was working fine since I had it, but this occured just today, Day-2 of using 1.5.7 .... wonder if it's related ...
Reboot seems to fix this -- but annoying >_<
Is anyone that is having these issues using bluetooth? I have isolated mine to bluetooth and sent an issue report to Motorola.
same problem here but not using bluetooth
My wife's Atrix does the same thing. "dials or hangs up while in a call". She does not own a bluetooth headset and I have only connected a Motorola 305 one time to it. Reboot fixes the problem. Reboot seems to take forever when compared to my Dell Streak.
Ed Venture said:
Am I the only one having problems with the Proximity Sensor on the Atrix? I can't seem to get it to kick in when on a call. I have already dial-toned a couple of people when talking on the phone. I have tried covering up the sensor by placing the palm of my hand over the to 1/2 of the phone and it never kicks in.
Can someone verify for me that it does work and not some software bug.
Thanks,
Ed
Click to expand...
Click to collapse
Had the problem with mine when I installed a different launcher had to delete it and restart the phone now it works ....for me anyways
Sent from my MB860 using XDA App
Hi I believe I traced the problem with the proximity sensor not working to Handcent SMS. On two separate Atrixes, as soon as I uninstalled Handcent and rebooted the phone the problem went away and stayed away. I have since installed GoSMS and now it happens just sometimes (usually after I install a new app) but a reboot after installing an app ususlly fixes it.
My Phone has a standard Telstra (Australia ROM) and is not unlocked or modified in any way.
Ed Venture said:
Am I the only one having problems with the Proximity Sensor on the Atrix? I can't seem to get it to kick in when on a call. I have already dial-toned a couple of people when talking on the phone. I have tried covering up the sensor by placing the palm of my hand over the to 1/2 of the phone and it never kicks in.
Can someone verify for me that it does work and not some software bug.
Thanks,
Ed
Click to expand...
Click to collapse
hi, you can try this
open /system/build.prop and add this
persist.mot.proximity.touch=1
reboot phone
Seem that i have this problem on my atrix,when i calling someone,the screen turn off immediately and the led on proximity sensor just keep turn on when i stop calling,i cant imagine this atrix have a lot a lot hardware problem
Sent from my MB860 using Tapatalk 2
If you are using unlocked bootloader or if u have unlocked the dim using a code then u will have to disable the In Pocket detection and then try sounds crazy but worked for me.
Sent from my MB860 using xda premium
ranjithkumar1201 said:
If you are using unlocked bootloader or if u have unlocked the dim using a code then u will have to disable the In Pocket detection and then try sounds crazy but worked for me.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
care to share how?
Similar issue
Just installed latest stable build onto my Atrix 4G, everything seemed fine last night, although I was using phone with bluetooth, this morning get a call, answer, screen goes dark, red proximity light comes on, and I can hear no sound, [later on the caller said he could hear me fine].
Phone would not wake up right off, and when it did it I still could not hear caller.
Been screwing around with settings all morning to no avail, discovered that the phone will only work with bluetooth device connected. without bluetooth the device goes dark, cannot wake up, have to hard reboot, with bluetooth and volume button awaken enabled, it performs normally, so possible connection to issues in post with proximity but with a bluetooth twist...
12as2005 said:
hi, you can try this
open /system/build.prop and add this
persist.mot.proximity.touch=1
reboot phone
Click to expand...
Click to collapse
Did that...... Does nothing much....
12as2005 said:
hi, you can try this
open /system/build.prop and add this
persist.mot.proximity.touch=1
reboot phone
Click to expand...
Click to collapse
Worked for me!!!
Stock rom with, root, atrix tweaks installed.
Thank's a lot!!!
Anyone else having issues with the proximity sensor not working when on a call? Screen stays on for me when its against my ear. I'm also rooted with Alien rom and Knightwolf's themes.
Sent from my MB855 using XDA App
Yep and it is annoying as can be.........seemed to go away after I updated.....
unsane said:
Yep and it is annoying as can be.........seemed to go away after I updated.....
Click to expand...
Click to collapse
I have the newest update installed. I would rather not reinstall but it seems like it's my only choice. #Sadguy
I updated and still have the problem. sucks!
this was covered in another thread.. I can't recall where but the fix for this is related to the in pocket lock setting...
go into menu > settings > display
disable 'in pocket' detection..
reboot your phone..
after reboot, you may enable it again if you use that feature or leave it off.
PROFIT !!
I take no credit for this fix. I don't remember who discovered it but I'm sharing it because it bothered me after the update as well.
If this works/helps, remember to hit that magic thanks button
I've tried that and it doesn't work...only thing so far that works is a reboot
Sent from my MoPho using XDA Premium.
daddymikey1975 said:
this was covered in another thread.. I can't recall where but the fix for this is related to the in pocket lock setting...
go into menu > settings > display
disable 'in pocket' detection..
reboot your phone..
after reboot, you may enable it again if you use that feature or leave it off.
PROFIT !!
I take no credit for this fix. I don't remember who discovered it but I'm sharing it because it bothered me after the update as well.
If this works/helps, remember to hit that magic thanks button
Click to expand...
Click to collapse
I've tried this myself too. Did not fix the problem
I would like to see a thread that shows all the issues we have and potential fixes. This is one that needs attention.
Sent from my SPH-P100 using xda premium
yup mine doesnt work properly either. ALso the ear speaker doesnt work ( i think its broken cuz it makes a funny noise
You guys may have hardware issues too, go swap your devices and see if it helps.
Sent phrom my Mo-Pho
This may sound crazy but mine does this only at work??? When I'm at home its fine. So I'm not so sure its hardware as opposed to radio or software. IDK?
xxxicu812 said:
This may sound crazy but mine does this only at work??? When I'm at home its fine. So I'm not so sure its hardware as opposed to radio or software. IDK?
Click to expand...
Click to collapse
Thats a weird one... Try a factory reset
Sent phrom my Mo-Pho
This isn't a device/hardware issue either. Something causes the sensor to shut off or fail. I feel this is software related.
Sent from my MoPho using XDA Premium.
I downloaded androsensor from the market, and you're right the prox sensor just stops responding... Says waiting for event, and after a reboot it gives an output of 1.2 our 39.4 inches.... Not sure what the prob is. I read on another forum that out may have something to do with rooting the phone, but I don't adhere with this. Are you guys with the problem rooted?
Sent from my MB855 using xda premium
had the same problem. turning off "in-pocket detection" worked for me.
Just to confirm. Once I disabled the in pocket feature the proximity sensor works just fine.
Once you disable the in pocket feature you will need to power off your phone than re power it up and it should be fine.
anoroc44 said:
Just to confirm. Once I disabled the in pocket feature the proximity sensor works just fine.
Once you disable the in pocket feature you will need to power off your phone than re power it up and it should be fine.
Click to expand...
Click to collapse
I have tried multiple roms (Homebase, Star Wars, and stock) and it still malfunctions. definitely seems like a hardware issue.
flawlessbmxr said:
Anyone else having issues with the proximity sensor not working when on a call? Screen stays on for me when its against my ear. I'm also rooted with Alien rom and Knightwolf's themes.
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
yea was really annoying.....but it went away after updating the phone
Anyone still having the problem? I am. Im on the latest OTA and did a hard reset via recovery. Moto forums seem to think it has something to do with Bluetooth. Is it a known hardware issue? Resetting the phone always fixes it.
Ya mine does that too....i never ever use blue tooth so that cant be the only issue..bluetooth is off
On the latest update. 6 or whatever was just released the other day ..i manually pushed it with rsdlite
We will see if that fixed it
Sent from my MB855 using XDA App
Hello
sorry for my english.
When I'm not plugin with the usb power connected, I've got a stranger behaviour very disturbing.
When my device goes itself or by on/off push buttons in sleep, automatically it reboot itself.
So, if I let him alone, the battery fall down very quickly, and I have to wait the rebooting before to use it.
I've read something which could help me here, but not enought : "http://forum.xda-developers.com/showthread.php?t=1184852"
. Do you think, it could come from Avast?
. I tried different ROM official and no unficial, sill the same. The thing strange, and after a official instal, the behaviours has desapear until i reboot.
Archos 80 Gen 9
3.2.79 from surdu_petru
In advance thank you.
A first solution : airplane mode
Bonjour,
I've found this solution http://forum.archosfans.com/viewtopic.php?f=74&t=53186
Put your device in airplane mode. Go in sleep (black screen). Push the ON button. Remove airplane mode. It's working! I don't know why?
It's not efficient for me. I have to know why, and how to solve it!
If you restart your device, and the WIFI was activated, you have to do it again.
Let's see what happen in the few day.
It has worked only one time.
In fact, if I let Avast make a scan or i let a music player, every thing is all right.
I do not understand what's happen....
decrase the Brightness
Nop
Thanks you for this answer but it didn't work. I decrease the brightness but same behaviour.
Mine has done the same thing. It's annoying. Just won't wake up, have to reboot. On newest FW too.
Sent from my ADR6425LVW using xda premium
reverendbill said:
Mine has done the same thing. It's annoying. Just won't wake up, have to reboot. On newest FW too.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Your issue is different. You have used Paul's root method and done nothing afterwards, see my thread
Sent from my ARCHOS 80G9 using xda premium
Quinny899 said:
Your issue is different. You have used Paul's root method and done nothing afterwards, see my thread
Sent from my ARCHOS 80G9 using xda premium
Click to expand...
Click to collapse
Mine's bone stock. Haven't done anything to it yet besides the factory firmware update. Was about to start rooting it, but haven't yet. About to hit up your thread to get that going. I DID have it airplane mode today, as I was on an airplane, hit the button, came right up. There's something to that...
Add
Thanks
To add some information -
I have done your procedure : http://forum.xda-developers.com/showthread.php?t=1456875
. Step 1: Gain temp root - OK Every works corectly (I only used the original post from Paul's root)
. Step 2: Enable SDE and Permanently root your tablet I do not did the last step below :
15. Turn off your device again and boot back into recovery
16. Select Developer Menu > Remove android Kernel
17. Accept warnings (MEDIA & APPS WILL BE UNAFFECTED)
18. Reboot. Your device will now boot the rooted edition every time
Click to expand...
Click to collapse
. Other thing, my archos do not seam to be rooted : When I'm trying to use titanium, it explain that it should be not rooted.
I've changed the method to the right one. Check my thread
Sent from my HTC Desire HD using xda premium
No
I tried 3 times. but still the same behaviour.
After a reboot or after that I install a appli, same behaviour. Very supprising.
Do you have any idea?
Cool
Trop bien!
It seams that the v 3.2.80
which have this correction : Hard drive based products: avoid suspend/resume issues happening sometimes
correct effectively those wrong behaviour.
I will confirm you next week that it's "SOLVED"
I'm trying this update tonight!
I like this tablet, except the damn sleep of death, which I JUST had to go through to boot it up to check the firmware version. If that gets fixed, I can permanently replace my Acer A100. It is the most annoying thing about this tablet. I do have a 250gb G80. Hope this does it.
So far so good, wakes right up. Need to let it sit for a bit and let it idle awhile.
Sent from my ARCHOS 80G9 using xda premium
Solved
Yes we can considering that the pb is closed.
See you.
gahia said:
Yes we can considering that the pb is closed.
See you.
Click to expand...
Click to collapse
3 days, working like a champ, thanks ARCHOS! Glad to see they seem to listen..
Sent from my ARCHOS 80G9 using xda premium
I am using latest version of Epinter's CyanogenMod 10.1 rom. Sometimes, scratch that almost once every hour my phone doesn't wake up when i pressed the power button. My only option is to take out the battery. I' ve seen other people with similar problem but they said it reboots before experiencing this problem, but I don't see any reboot. It even happens when I lock it and try to wake up a second later. Also if my phone is locked in that state when people call me they hear it ringing but my phone gives no response. Does anyone have a similar problem and/or have a solution to this problem. Thnaks in advance.
deep sleep fix or did you not try that? furthermore, you do realize that this could have been posted in the dev thread, and that this is an alpha kernel and an alpha rom and is experimental
Sent from my MB860 using xda app-developers app