Related
Hey guys, I'm currently running CM6, and when I tried to upgrade to CM7, from the version with overclocking and undervolting added, my fone always reboot and lag continously, unusable until i restore using factory reset.It never happened with any previous version of CM7. A couple day back, I tried the overclocking tweak for CM6, and the same thing happens. I have to restore using Xrecovery. Does anyone knows what the problem is ? I really want overclocking function
stable overclocking is 768 or less.... this much i knw some dev will help you
You did say that you used the overclocking patch , but did not tell did you use SetCPU with set on boot option ? Also what is ur max and min settings in setcpu ?
Anyways , not sure if you will now be able to go inside setcpu , since ur phone is restarting.
On mini pro , for me 780+ Mhz caused reboot. And if you have setcpu set to set it on each boot , then u will end up in infinite loop. For me it happened , but luckily if you do not touch ur phone (touch screen touch ;-) ) after a reboot , it wont reboot (atleast for me).;
So after a reboot :
1. connect phone to PC
2. use adb to uninstall the setcpu
3. reboot again.
This time you should not be having trouble as your phone should behave normally.
Again install setCPU (if you are interested still !!) and set the max to anything below 760Mhz.
What should we do if there is the reboot loop but setcpu is already uninstalled? Or if its installed but overclock is not set on boot?
Hey thanks for the help, but I can't do anything at all with the phone after the patch, with or without setcpu. It booted up, on lockscreen, lag for 30sec and continous reboot then -.-''
Sent from my U20i using XDA Premium App
will make much more sense letting people know what you have done. Just the normal OC module should not have ur phone rebooting.
Does the phone reboot if you do not touch it but just keep it connected to PC ? please answer or else its very hard to try and figure out an answer.
if you feel its causing an issue , then u got to figure out a way to disable that module.
The module gets loaded as x8oc.ko.
In CM6 - v4 , this is not there by default but will appear in hw_config.sh if you have patched it.
So u got to get /system/etc/hw_config.sh and comment out the line insmod for x8oc.ko and anything associate with it .
Did fresh install of v4 after factory reset, resulted in no overclock options and completely stable. Installed oc zip from cm6 oc thread which resulted in infinite reboots even when attached to pc, was not able to touch any settings. Reflashed v4 without factory reset and am back to no overclock and completely stable. Setcpu was not installed, recently installed on fresh v4, no options beyond 600mhz.
yep ..if u did a fresh install of v4 , it means the overclock is not functional as the module is not loaded in it.
Changelog for v4 says overclocked and undervolted, but never mind that. Installing oclock.zip as per instructions in that thread results in infinite reboot, does not stay up long enough to use adb shell or access setcpu. The fresh install of v4 does have overclock options in cyanogenmod settings, but values cannot be edited.
Are you implying that v4 will not support the oclock.zip or simply replying only to first sentence of explanation?
Any help is appreciated.
ok . so let me explain ( i know its quite hard on both ways ) . The overclock module (x80c.ko) is NOT loaded by the default V4 version. So if the module is not loaded Cyanogen setting will only show you the max (600 Mhz i thnk) and min (122 Mhz - I think). I did not find that module to be loaded in any of the init* scripts or in hw_config.sh. But the module is present with the build in the modules folder (but not active as its not loaded with insmod).
So if you just coming just after applying V4 - with no other patch. Then you do not have active overlocking module - hence overclocking wont work with SetCPU. Cyanogen does NOT provide you a scope to change the frequencies - you need setCPU - (you can change the max thru command line after enabling the module).
Now if you have patched the same with the oc patch , you have the module active (insmod works) , but another line of it in the hw_config.sh (patched one) does not become effective for me (some people reported it worked for them though).
The constant reboot which i faced was because i (with the help of SetCPU) had set very high frequency (causing the system to become unstable).
So inorder to fix it , you can do the following:
1. Full wipe through xrecovery
2. Apply V4 again.
3. Change hw_config.sh to add the insmod command to load x8oc.ko module.
4. Reinstall setcpu and see if you can set the max/min to safe values (say around 719 Mhz max and min as 300 or 400 Mhz).
5. If you see the system to be stable , well and good.
If by above , setCPU does not detect max/min (max should be 825 Mhz) , then you need to add the echo x27 > /proc/x8oc to hw_config just after the insmod line of x8oc.ko. (you will see some threads where sleep 2 or sleep 4 is also asked to be put in , but for unknown reason it did not work for me).
Whew!! that was long . But thats the way it worked for me.
For me when the reboots were happening , i had my phone connected to PC , but i was not touching the phone at all (if i touch , it used to reboot - but adb shell was working if i do not touch it).
If any further clarificaiton required , i would be glad to assist.
But before puting in a query , please try and give as much information was to what you did after which the reboots started (not just saying that i did the OC patch - cos for me just the OC patch never resulted into the reboots).
Thank you for that awesome explanation and sorry for the lack of relevant information earlier in the thread.
Should be able to do as you have suggested when I get home and will report back, either way your explanation has made it all clear and I can see where I have missed important steps. Many thanks.
Edit: edited hw config.sh, inserted insmod, sleep and echo lines. Stable ay 729, reboots at 748. Thanks again
good to know it worked !
same problem with my minni.... reboot again and again
Check your baseband, it must be xxx15 or it won't work because of different kernel
Nah got everything rite, basband and kernel, just when I apply the OC tweak, the fone would boot up, but freeze at lockscreen. IT DOES BOOT UP, BUT STUCK AT LOCKSCREEN !!! So bloody annoying, then stuck on bootloop until restore /system using xrecovery
Sent from my U20i using XDA Premium App
Don't apply the oversclock tweak from xrecovery, instead try editing hw_config.sh to have:
# x8 overclock
insmod /system/lib/modules/x8oc.ko
sleep 2
echo x27 > /proc/x8oc
I believe i had the same issue until i did this, then it was stable.
my mini max cpu is only 691 mhz or else the reboots and its laggy as hell. LIKE all your work every wear
have your lovely MDDI on to it help alot but still scrolling lag. maybe fresh install via seus?
wrong thread
THIS THREAD IS BORN TO HELP ALL THE DEV... PLEASE MAKE HERE YOUR QUESTION.
DON'T PUSH THE DEV.
When you put a question when is possible i update this FAQ.
Please excuse my really bad english....
INSTALL INSTRUCTION FROM FRESH STOCK ROM
save all your data
start seus recovery from Sony Ericsson PC Companion and make your phone clean and fresh.
install a file explorer, install XRECOVERY and install the rom, then restart and install with XRECOVERY the HOTFIX you need.
CAN I UPGRADE FROM VERSION TO ANOTHER?
Yes in the 90% without trouble, your data and app are safe, but not from foryou to ginger and sometimes....
CAN I INSTALL ONLY THE LAST VERSION?
Usually the next version have all the hotfix and some tweeks, yes you can.
SOME APP CRASH, WHY?
Try to delete all the data of the app from the application menu.
Try to uninstall and reinstall the app.
Sometimes you need a fresh SEUS flash...Try to discover if your app not work only for you or all the people...
SOME APP DON'T INSTALL (like angry birds), AND NOW?
Try to Wipe Dalvik Cache using xRecovery
In case, if any app doesn't install even after cleaning Dalvik Cache via xRecovery for some reason.. Try this command:
rm /mnt/secure/asec/smdl2tmp1.asec
Or simply navigate to /mnt/secure/asec/ using root explorer, find smdl2tmp1.asec and delete it. It will solve the problem.
MY BATTERY HAVE STRANGE DRAIN ISSUE
Try this: make a full charge of the x10, set wifi option "never sleep", reboot in xrecovery, wipe battery stats and then use ALL the battery before the new recharge.
I CAN'T UPDATE AN APP, WHY?
Try to delete data app or unintall the app (for system app uninstall with titanium backup or similar app) and then install it again.
I HAVE SOME KEYBOARD HARDWARE AND LAYOUT ISSUE...
Try here: http://forum.xda-developers.com/showthread.php?t=982341
HOW I CAN MAKE FM RADIO WORK?
Turn off Wifi
Turn on Bluetooth (wait till its started)
connect Head Phones
start FM App (make sure when you hit menu button you have set the right region)
And listen to FM Radio
MULTITOUCH NOT WORK, WHY?
It's possible you have a differtent version of x10 mini pro, there are an alternative module, be happy, try this link and copy the module in your /system/lib/modules with a filemanager (you need to reboot).
http://forum.xda-developers.com/attachment.php?attachmentid=620359&d=1307637881
SOME DEFAULT STOCK ROM APPLICATION NOT WORK (like ALBUM), WHY?
We don't have sony Ericsson framework... sorry, stay tuned for next hotfix.
MY X10 SOMETIMES REBOOT, WHY?
Reboots? -> Flash non overclocked version or try to remove undervolt option.
MY X10 FREEZE AT SE LOGO, NOW?
Stuck at SE Logo? -> Wipe Data and Dalvik Cache, restore via MyPhoneExplorer or something Else
CAN'T USE OLD APP2SD and ext2/3/4 PARTIOTION, WHY?
Some custom roms use the native Froyo app2sd, go in the app menu and move from here to the sd, the old app2sd is born for Enclair rom, on this roms not work.
I CAN'T MOVE APPS TO SD, WHY?
Can't move apps to SD?? -> Format SD Card or delete hidden folders on SD Card
Make sure you have 'Allow application moving' checked in settings>cyanogenmod settings>application settings
I CAN'T OPEN DISPLAY SETTINGS FOR AUTO BRIGHTNESS, WHY?
see here http://forum.xda-developers.com/showpost.php?p=13382274&postcount=10
IN THIS ROM WE SHOULD HAVE JIT ENABLEAD OR DISABLED?
Leave jit enabled, it gives you the best overall performance. If you play a lot of games its ok to turn it off. I leave it on all the time. If you need to save battery you can also try to turn jit off. Resizing jit heap takes a bit of battery
HOW I CAN SET AN APP AS THE DEFAULT APP?
Go to the application menu ---> manage application ---> find the old default app and remove the default. Next time android make you the question of the new default app.
HOW I CAN REMOVE SYSTEM APP?
IS Dangerous but if you want try use an app like TITANIUM BACKUP.
MY PHONE STAYS AT SONY LOGO OR IS IN BOOT LOOP
Check baseband version ends with xxxxxxxxx015 if not you WILL need to flash to newest Sony Firmware with SEUS ( 2.1.1.A.06)
MY KEYBOARD HAVE SOME TROUBLE WITH LIGHT...
Ok once again:
Goto Settings -> Display : turn off automatic brightness
Now goto Settings-> Cyanogen Mod -> User Interface -> Automatic Backlight:
Enable the Checkbox "Enable"
Length of Timewindow : 30 seconds
Timeintervall : 5 seconds
Adjusted Lightlevels
Levels of Backlight : 26
Edit Levels
Set the Levels to the numbers in the attched image.
Once you done scroll back up and click on "Save & Apply Button"
The Translation from the Image.
Bildschirm = Screen
Tasten = Buttons
Tastatur = keyboard
enter the provided values from the image. You'll see what needs to be done.
http://forum.xda-developers.com/attachment.php?attachmentid=598084&d=1305569629
SMILEY PAGE ON SYM KEY IS FREEZED EVERYTIME SCROLLED TO THE END,HOW TO FIX?
Enable desktop overscrolling in cm setting > user interface. It only works for Sym Key page while keyboard is opened, not for the portrait style touch keyboard.
I CAN'T FIND OR USE MP3 RINGTONES OR RINGTONES ON FROYOCOMB
put ringtones or mp3's on /sdcard/ringtones and reboot
MY AUDIO LAGS WHEN PLAYING MUSIC
Set MINIMUM cpu speed to at least 245 MHz or 320 MHz instead of 122 MHz
PROBLEMS WITH WIFI?
Install this through xrecovery, thanks to bitmovel
I DISABLED WLAN AND ENABLED BLUETOOTH BUT I STILL HAVE PROBLEMS WITH BLUETOOTH
try:
settings - apps (all) - "bluetooth forwarding" - clear data
- reboot to xrec:
- clear dalvik cache, clear cache data
- reboot, enter pin, wait (wait until system is booted completely
- reboot again
- have fun
( lazy people can try if just clearing app data in first step helps, otherwise go through the described process)
I HAVE PROBLEM WHEN USING USSD CODE. IT ALWAYS FAILED AND HAVE ERROR. WHAT SHOULD I DO?
Slade is working on it but for the time being you can type the number using your mini pro keyboard, The ussd code will works perfectly.
I CAN'T INSTALL CUSTOM.ZIP ON CWM RECOVERY BUT WITH XRECOVERY I CAN...
This script it's amend script, so it need to be translated to edify script for work on CWM recover
ITS IMAGE/AUDIO SYNCHRONIZATION WORKING RIGHT WHEN RECORDING VIDEO?
Its not totally fine, but at least they're almost synchronized
MESSAGE DELIVERY TROUBLESHOTING
http://forum.xda-developers.com/show...02&postcount=4
CAMERA FORCE CLOSE WHEN TRYING TO RECORD VIDEO
Make a wipe of camera app data with titanium backup
TROUBLE WITH MMS SENDING
1. go to your phone providers site and find the manually mms settings for your phone and set the numbers like it says.
2.go in to the internet APN and set APN-type like so: default,supl,mms(have only 2 APN 1 internet 1 mms)
3.reboot your phone and enjoy
I HAVE X WEIRD PROBLEM, NOT ON F.A.Q, WHAT CAN I DO
Please give us more info, rom, baseband, oc/uv installed, and if possible, a Logcat
I NEED REALLY THIS... HOW YOU CAN HELP ME?
SLADE AND OTHER DEV ARE WORKING FOR PASSION AND LOVE NOT FOR YOU, DON'T PUSH PLEASE.
Really good F.A.Q! Very smart of you to do one for the more newer people here
Do you know someone who could fix themes to this rom? I really badly want the Black HTC Theme on this ROM!
palle14 said:
Really good F.A.Q! Very smart of you to do one for the more newer people here
Do you know someone who could fix themes to this rom? I really badly want the Black HTC Theme on this ROM!
Click to expand...
Click to collapse
i don't know but i search
dart760 said:
i don't know but i search
Click to expand...
Click to collapse
Hm okey :/ thanks anyway.
Thanks dart that really helps a lot!!
@dart
where's this remove defualt app option? i looked in all the settings. if there's an easier way to remove than going into adb, then please tell me.
Nice post! Hopefully it will clear the dev thread of the same repeated questions... sadly we're still gonna have to read through posts like :
"Slade, i just went for a poo, do i need to wipe?"
and
"Slade, i installed your rom, and now my TV doesn't work, WTF i h8 j00!!"
and
"Slade, can you add a function to this rom to steer my car automatically?"
fr3akBut said:
Nice post! Hopefully it will clear the dev thread of the same repeated questions... sadly we're still gonna have to read through posts like :
"Slade, i just went for a poo, do i need to wipe?"
and
"Slade, i installed your rom, and now my TV doesn't work, WTF i h8 j00!!"
and
"Slade, can you add a function to this rom to steer my car automatically?"
Click to expand...
Click to collapse
I was laughing my ass off when i read this! Very funny
fr3akBut said:
Nice post! Hopefully it will clear the dev thread of the same repeated questions... sadly we're still gonna have to read through posts like :
"Slade, i just went for a poo, do i need to wipe?"
and
"Slade, i installed your rom, and now my TV doesn't work, WTF i h8 j00!!"
and
"Slade, can you add a function to this rom to steer my car automatically?"
Click to expand...
Click to collapse
best post ever!
is it save to remove the se stock album app (with titanium backup)?
Snoopo said:
is it save to remove the se stock album app (with titanium backup)?
Click to expand...
Click to collapse
yes you even can delete the whole apk with root explorer
a suggestion for the FAQ, as we've just had the 4 billionth question about installing sodding Angry Birds....
[Q] Whai iz myz Angri Burdz nots installering?
[A] Wipe Dalvik Cache using xRecovery
simples
http://forum.xda-developers.com/showpost.php?p=13503340&postcount=337
If we don't like the new colourful icons in the settings menu, how would we get the first icons back?
On the second or third page i have posted settings.apk and settingsprovider.apk repleace with root explorer
Sent from my U20i using XDA Premium App
it figures, the ony ones I haven't tried. Thanks for replying so quickly for something so trivial, I wasn't in a rush. There are far more important things you're doing.
hey, is it possible to get the icons in the upper statusbar in green like in owains final? coz i like them more than the white ones ;>
i mean the icons for battery, wlan and bluetooth.
luz1fer said:
hey, is it possible to get the icons in the upper statusbar in green like in owains final? coz i like them more than the white ones ;>
i mean the icons for battery, wlan and bluetooth.
Click to expand...
Click to collapse
You mean the colors under the icons or the icons themself?
Sent from my U20i using XDA Premium App
hey owains...welcome back dude and thnx for all the great work...again ;>
ye i mean the icons themself
and work by slade87 and the other developers of this rom and features too =D
fr3akBut said:
Nice post! Hopefully it will clear the dev thread of the same repeated questions... sadly we're still gonna have to read through posts like :
"Slade, i just went for a poo, do i need to wipe?"
and
"Slade, i installed your rom, and now my TV doesn't work, WTF i h8 j00!!"
and
"Slade, can you add a function to this rom to steer my car automatically?"
Click to expand...
Click to collapse
Lol man nice hahahaha
Is it better to use move to sd feature on the rom or link2sd app?
Sent from my U20i using XDA App
Simple Streak ROM
Modified official ROM. Removed Dell Stage Launcher and other unneeded applications. ROM includes the Launcher Pro and the left Swype. I made primarily for myself, but maybe someone else will like it
USE AT YOUR OWN RISK, ABSOLUTELY NO GUARANTEE.
INSTALLATION:
make a backup
copy .zip to SD card
update via StreakMod Recovery
do Factory reset
UPGRADING FROM PREVIOUS VERSIONS:
make a backup
copy .zip to SD card
update via StreakMod Recovery
DOWNLOAD:
rom.spidla.info or MultiUpload (First, make a full backup)
DONATE TO DEVELOPMENT:
If you like Simple Streak, you can contribute to development through PayPal. Thank you.
CHANGELOG:
1.3 (size ? MB) - in testing
- updated Maps (v5.9)
- removed Swype
- new build Simple Streak kernel (many changes)
1.2 (size 91 MB) - 19. 6. 2011
- custom kernel (based on the official, simplified, overclocking option, slightly undervoltage (for longer battery life)). Original kernel is available here.
- removed QuickOffice
1.1a (size 94 MB) - 10. 6. 2011
- removed forgotten drivers that caused problems when using the camera with the "performance update"
1.1 (size 94 MB) - 10. 6. 2011
- Swype is the default keyboard
- more cleaned (removed Facebook, etc...)
1.0 (size 97 MB) - 7. 6. 2011
- based on official 354
- rooted
- cleaned
- adjusted build.prop and init.streak.post_boot.sh
- black taskbar (partially used GingerKrad from user Krad)
- change default orientation to portrait (according to instructions from user jhotmann)
KNOWN ISSUES:
- after the start to be switched on / off the display rotation settings
NOT WORKING?
Are you sure you've done a factory reset? You have to do a factory reset on the first screen (from Dell) of the recovery mode.
Still not working or causing problems (button still lights)? Maybe you're old baseband, try to download new here and upload using fastboot command.
Code:
fastboot -i 0x413c flash amss amss.mbn
Last chance. If you still have problems, try loading the original ROM ver. 354 and then reload the Simple Streak ROM. This may work
OPTIONAL MODIFICATIONS (update via StreakMod Recovery)
Landscape mode - return back to the default display orientation
Stage UI - return back to the default launcher from Dell
STK Tools - return back to the Sim Toolkit
Original kernel - if you have any problems, you can try the original kernel from Dell.
DJ-Steve KERNEL
Install the kernel from DJ_Steve ROM (thanks for his great work) and adjust some settings. After the update default frequency is set at 1.19 GHz and smartass CPU governors (can be changed via the tools available (SetCPU)). The update will not lose any user data.
DJ-Steve KERNEL INSTALLATION:
you have already installed the Simple Streak ROM (ver. 1.0, 1.1, 1.2)
copy perfupdate.zip to SD card
update via StreakMod Recovery
If update does not work, try the version without the default overclocking.
Good to See....
other custom ROM choices emerging for our beloved Streak!
Anyone try this yet?
Based upon what I've done with 351 (completely ripped out the Stage UI, Dell Sync, Amazon MP3, CoPilot Live, Evernote, Napster, Oovoo, PageOnce, Roxio Now, and Zinio Reader), leaving Swype and adding LauncherPro, the Streak should be very fast and very responsive, especially when shutting it off.
can you test netflix?
fastwanabe said:
Anyone try this yet?
Click to expand...
Click to collapse
yeah ive had it on my phone for a few hours....
ive been using 354 since it come out & streakdroid before that & i think 354 is great so i jumped on this when it come out
ive got to admit i havnt done a factory reset yet as i dont want to lose my setting (i might tonight when i dont need my phone)
EDIT
portrait pics
A very clean rom. Simple and fast.
I really like it and didn't find any problem as of this moment, phone works, GPS works.
Is that possible for add adhoc network support in the next version?
Thanks Spidla, keep up the good work
Seems pretty solid, the only issue I have, is after a reboot, it is seems to be stuck in Landscape and wont auto rotate on the home screen. When I eventually get it to go Portrait everything is fine. I cleared the program cache, fixed permissions and cleared the dalvic cache, but that didn't fix the issue. Apart from that all my apps restored fine with Titanium backup root (after installing busy box) and they all work OK, there has been no force close issues either. Great work, thanks
Zac
Disregard..................
italian?
scippaculi said:
italian?
Click to expand...
Click to collapse
screenshot of the languages in it
Been using this for an hour or so and must admit I am very happy with it. Feels very fast and I love the built in portrait lock and the battery percentage mod. I think this rom is a keeper !
To the person stuck in landscape, on boot up I go to settings and toggle auto rotate on, rotate to portrait and then toggle it back off. Seems to be working for me so far...
Only question I have is that I'm using this with an older baseband (351) is that going to cause me problems ? Seems ok so far.
Cheers,
malty
Wow...will try...thanks something to play with now
x
I love this rom and portrait lock ,Thanks friend.
maltloaf said:
Only question I have is that I'm using this with an older baseband (351) is that going to cause me problems ? Seems ok so far.
Cheers,
malty
Click to expand...
Click to collapse
351 isn't old. You'll be fine.
Posted with StreakZilla, using XDA App.
Works fabulous! As soon as I started the system, it felt so light and fast! I really like it! Good job! *thumbs up!*
EDIT: The only thing I don't like is that I can't uninstall Launcher Pro and buy the full version. I just can't uninstall. Any ideas?
EDIT 2: Nevermind, I install an Unlocker and now I've got the full version installed.
Thanks again for the ROM!
markslo112 said:
Works fabulous! As soon as I started the system, it felt so light and fast! I really like it! Good job! *thumbs up!*
EDIT: The only thing I don't like is that I can't uninstall Launcher Pro and buy the full version. I just can't uninstall. Any ideas?
Click to expand...
Click to collapse
just uninstall using titanium backup.of course root required! cheers!
I'm having an issue with this ROM.. I factory reset everything, davlik empty, and clear the partition as well before installing, install the ROM, and factory reset again, reboot system.
Goes to Android load screen and then goes into regular android lock screen (portrait) and then back to the Android load screen, does it a couple times and then either freezes and I have to take out battery or just freezes at Android lock screen.
I am restored back to GingerStreak now. Any suggestions?
For a multi language rom use .351. I use it with Dutch language and it is great stuff
@OP Did you also optimize the build.prop?
millia90 said:
I'm having an issue with this ROM.. I factory reset everything, davlik empty, and clear the partition as well before installing, install the ROM, and factory reset again, reboot system.
Goes to Android load screen and then goes into regular android lock screen (portrait) and then back to the Android load screen, does it a couple times and then either freezes and I have to take out battery or just freezes at Android lock screen.
I am restored back to GingerStreak now. Any suggestions?
Click to expand...
Click to collapse
Sounds like you have a boot loop.
Try to go by these steps (I did it that way)
1. Put .zip file into the root of SD card
2. Boot into Recovery (I'm using Clockwork)
3. Do a dalvik cache wipe
4. I didn't clear the partition.
5. Do a factory reset in the Clockwork recovery.
6. Choose the .zip and flash the ROM
7. When it says installation completed, choose the option ''Reboot Recovery'' and press VOL UP + VOL DOWN at the same time and keep holding the power button
8. You'll get to the Dell Factory Reset screen
9. Do a factory reset (NOT FROM THE RECOVERY)
10. Reboot automatically
11. Enjoy
Also, download the ROM file again, it might be corrupted.
- Hope it works out for you, it really is a great ROM.
This ROM features a stable enviroment [the most stable tested by me so far], with the least number of bugs (with 366BB), and probably one of the best performances.
Features: This ROM provides a default Portrait screen, it also has as the stock theme - TouchWizzedB (It looks like the Samsung ROM's, don;t know why i like it)
It features BeatsAudio, Bravia Engine and xLoud,
IIt provides a bootanimation and sound provided by Madhacker.
(if the bootsound is not on and you really want it, enter in terminal enablebootsound)
It also provides as the default launcher - GO Launcher Ex.
You can add [highlight]software[/highlight] capacitive buttons in the taskbar - thanks to nom051205 < Zip below
It was tweaked for daily use.
Skype has not been fully fixed, but i found a workaround, after rebooting, call someone, or a number like 444 then close, it should work, tested multiple times and it worked, i'm going to try and make a script to get rid of this step. (sometimes it works without doing a thing, so i think it is about luck )
Also, skype seems to leave the speaker on after singning out creating a huge battery drain, if you experience this kind of issue please remove your Skype and install this one, then go to advanced settings (in skype) > sound settings > disable sign-in/out sounds and Force speaker off after calls.
With those workarounds provided above, you should have a seamless experience with Skype..
FAQ:Q: Does it have USSD fix/Gapps/Phoenix Kernel?
Yes
Q: Is the WiFi stable?
With 366BB i have no problems with WiFi stability.
Q: Do i have to do a full factory reset if i come from other CM7 ROM?
No, just wipe dalvik cache, full factory reset is a must if you come from DSC/FroYo/Official 2.3.3.
Q: How do i flash 366BB?
You put your device in Fastboot, connect the USB and use a tool provided here or here.
Q: I can't install the ROM! Installation Aborted! (yeah, yeah, this is not a question..)
Open the zip file then you will see a folder, go into the folder, select all (meta.inf; system; boot.img) and re-zip those files and name it LXdroid 0.x.zip then flash it.
Credits to nom051205 for using his post almost copy-paste.
Q: What's wrong with Swype? It just FC's?
Install it manually, this should do the trick, you can find swype.apk in a link below.
Bootsound/Bootanimation Script Commands
Terminal commands for scripts:
enablebootsound - enables bootsound
bootsoundoff - turns bootsound off
bootsoundon - turns bootsound on after being turned off
newbootsound - /sdcard/android_audio.mp3 is copied as new bootsound
newbootanim - /sdcard/bootnanimation.zip is copied as new boot animation
(Probably you need to type su before those scripts, just saying...)
Credits go here.
Note: This is my first ROM, feedbacks and head-ups/tips would be welcomed in order to tweak it further.
--Added Screens for those who want to see something
You can upgrade to higher versions of LXdroid ROM without losing your data, just wipe Dalvik Cache!
LXdroid ROM 0.2 is provided as standalone flashable zip, it doesn't need 0.1 in order to work.
Download link: LXdroid ROM 0.2
Download link LXdroid ROM 0.1 (old, useless, not needed)
Download link swype.apk
Hotfixes for LXdroid 0.2 for Autobrightness FC and xLoud and Bravia permissions found here!
Quick tutorial aka Roadmap to a Custom ROM -Download ADB/Fastboot tools + Drivers from here. (You need to install the drivers before you begin).
-Download MultiRecoveryFlasher from here.
-Download MultiBasebandFlasher from here or download dsp and baseband flasher by n0p and StreakOwner from here.
-Download a custom ROM like DSC (most stable in my opinion), Longhorn or, the one provided here.
Now let's get started for real!
1-Install the drivers.
2-Put your streak in fastboot by turning the phone off and after that powering on by holding down volume + power button.
3-Open MultiRecoveryFlasher and flash StreakMod recovery. Reboot.
4-Put your streak again in fastboot.
5-Open MultiBasebandFlasher and flash 366BB or the script provided alternatively (does the job all by itself ). Reboot.
6-Enter Recovery by turning the phone off and then powering on holding up volume + down volume + power button.
7-Select "Software upgrade via Update.pkg on Sd Card"
8-A Dell logo and an attention will appear, press power button once to show the menu.
9-Hit advanced to mount sdcard via PC, so the SD card will appear in you PC via recovery.
10-Copy the ROM you downloaded to the sdcard (preferably to root).
11-Hit back in recovery, choose install sdcard updade.zip, then choose zip from sdcard, browse for your zip, and hit the camera button then select yes.
12-After the installation is completed, hit back to the main screen of the recovery, and choose wipe data/factory reset, then wipe cache partition, then choose advanced, wipe dalvik cache, wipe battery status.
13-(It is recommended to reboot again and do a factory reset from the dell recovery, White Letters)
14-The system will take some time to boot up, but you are done, enjoy your custom ROM.-------------------------------In my opinion the fastest and easiest way to get a custom ROM--------------------------------------------------
Disclaimer:
This ROM was made primarly for my personal use, it provides elements from all over this Forum, Credits section thanks personally all and i thank more of them that are not listed there, it is based on CM7.2 mdpi by hPa, it has elements from Longhorn and others, as always do a nandroid backup just in case, and don't blame me for ruining your beloved streak, although i don't think you can .
Credits:
The people/teams that inspired me to do this:
-DSC Team / n0p - Kernel and many Tweaks.
-hPA - For porting CM7 to streak.
-Tenorntex - Some tweaks imported from Longhorn, dialing screen theme.
-nom051205 - Soft-Buttons flashable zip
-Madhacker - Bootanimation and sound.
-xda Forum - For a great enviroment, other ideeas and tweaks.
-Google - Great search engine, thanks for the Android OS
-Others
--If you want credits for something i have in my ROM and i forgot about you, please let me know and i will update this --
Changelog:
0.3 - TBA
0.2 - 21 august 2012 - skype seems to be fixed, needs more testing, further improved performance, added BeatsAudio, Bravia Engine, xLoud, added stock Swype keyboard, bootsound enabled by default, disabled USB Debugging icon from Status Bar, (only the Icon, debugging remains enabled), maybe more - Kernel: DSC Phoenix Kernel Test 4
0.1 - 20 august 2012 - First release, good performance, things that work on all CM7 ROM's work on this one, things that don't work in all CM7 ROM's don't work in this one. - Kernel: DSC Phoenix Kernel Test 4
I guess it has fixed CM settings (like setting cpu frequency from within the settings and fixed lockscreen on 160 or 180 ??
jitin02 said:
I guess it has fixed CM settings (like setting cpu frequency from within the settings and fixed lockscreen on 160 or 180 ??
Click to expand...
Click to collapse
You can see the CPU settings, freq's and governors but you can't change them from the CM settings, i've included AnTuTu CPU Master Free in the ROM, and the locksreen it works fine on Ring and Lense, Rotary and Sliding Tab are small and aligned to the left. so i would say that no, it doesn't have them fixed as i didn't needed them, but maybe i will look into it.
Personally i use Ring Style at lockscreen and dial screen, with one ring only at lock and the default Freqs (128-998 mhz , Conservative).
Lexmazter said:
You can see the CPU settings, freq's and governors but you can't change them from the CM settings, i've included AnTuTu CPU Master Free in the ROM, and the locksreen it works fine on Ring and Lense, Rotary and Sliding Tab are small and aligned to the left. so i would say that no, it doesn't have them fixed as i didn't needed them, but maybe i will look into it.
Personally i use Ring Style at lockscreen and dial screen, with one ring only at lock and the default Freqs (128-998 mhz , Conservative).
Click to expand...
Click to collapse
if u can look into it i will be thankfull to u as i had to go back to froyo 351. b'coz of DSC wifi issue .
Thanks and is there no way to resolve cm settings frequncy issue:silly:
jitin02 said:
if u can look into it i will be thankfull to u as i had to go back to froyo 351. b'coz of DSC wifi issue .
Thanks and is there no way to resolve cm settings frequncy issue:silly:
Click to expand...
Click to collapse
You can use alternative software, as i mentioned, there is SetCPU or CPU Master Free, and CPU Master doesn't stay always on in RAM and you can set it to Set frequencies on boot
I think that CM frequiencies support must be added from the kernel, so i don't think i can do something about it
jamo59
Hello!
I like the ROM!
Only the Longhorn 2.9.1 Quadrant 2300 points for that!
The LXdroid only 0.1 points in 1408.
Well, it's a huge difference.
Test Battery, but the IGO primo 9 to be strong!
This looks like a very fast everything works properly (from my experience it!)
jamo59 said:
Hello!
I like the ROM!
Only the Longhorn 2.9.1 Quadrant 2300 points for that!
The LXdroid only 0.1 points in 1408.
Well, it's a huge difference.
Test Battery, but the IGO primo 9 to be strong!
This looks like a very fast everything works properly (from my experience it!)
Click to expand...
Click to collapse
I made this ROM without testing Quadrant,i never trusted that benchmark , i tested with AnTuTu Benchmark and it is not a big difference from Longhorn to LXdroid, i still need to tweak something more, but the overall feel is smooth as butter in my experience and the battery life is just great for me.
jamo59
Whew!
Now, I see no Google Talk?
Even I test!
jamo59 said:
Whew!
Now, I see no Google Talk?
Even I test!
Click to expand...
Click to collapse
You can download it from Google Play (Market), i don't use it so i didn't included it
jamo59 said:
Whew!
Now, I see no Google Talk?
Even I test!
Click to expand...
Click to collapse
I think you're really really fast IGO is not there!
Longer certainly really deserves a try!:good:
SKYPE ??
so what about skype, is it working ??
MadHaker said:
so what about skype, is it working ??
Click to expand...
Click to collapse
I'll tell you! I'm also interested!
Time!
MadHaker said:
so what about skype, is it working ??
Click to expand...
Click to collapse
I'm testing it now , i'l report back later.
EDIT: Not working...checking for a fix...
Lexmazter said:
I'm testing it now , i'l report back later.
Click to expand...
Click to collapse
Not ok! (skype)
Lexmazter said:
I'm testing it now , i'l report back later.
EDIT: Not working...checking for a fix...
Click to expand...
Click to collapse
i am sorry to say that any rom above 2.3.3 usually have problem with voip and there are no fixes for it at the moment...
deysmacro said:
i am sorry to say that any rom above 2.3.3 usually have problem with voip and there are no fixes for it at the moment...
Click to expand...
Click to collapse
Yeah, you said it, "at the moment"
jamo59 said:
Not ok! (skype)
Click to expand...
Click to collapse
Hello there!
If anyone has not read it, the good must be so skype has stopped working, that:
1, restart
2, the recording is started and is ready to.
3, visszahallgatod
4 to start the skype
5, a voice recorder pick up service.
6, to listen
7, glad it works!
jamo59 said:
Hello there!
If anyone has not read it, the good must be so skype has stopped working, that:
1, restart
2, the recording is started and is ready to.
3, visszahallgatod
4 to start the skype
5, a voice recorder pick up service.
6, to listen
7, glad it works!
Click to expand...
Click to collapse
Can you be more specific, i don't really understand what you are trying to say here
Lexmazter said:
Can you be more specific, i don't really understand what you are trying to say here
Click to expand...
Click to collapse
2nd that ;0)
CyanogenMod 10.2 for P768
CM 10.2 has reach state. So I update this rom and I'm moving my CM repo to CM 11 now.
This is an unofficial CM 10.2 build from source with original omap kernel (3.0.31-CM+). Please flash at your own risk. I've tested on my P768f so it should work on all L9 P768 phone.
Only for P768 phone with Unlocked bootloader!
Camera & Gallery don't work without sdcard, please flash sdcard emulate patch to fix it
Click to expand...
Click to collapse
Features
Original Kernel 30.0.31 CM+ for OMAP board.
Jellybean 4.3.1
Swap internal/external sdcard / Disable sdcard emulate / Emulate sdcard via Aroma installer option
Home button wake phone (you can disable this in Display setting)
Reduce headset volume and increase speaker volume
OC - 300, 600, 800, 1008, 1200 Not OC by default, must select max 1200 in Performance menu
UV - 925, 1075, 1175, 1275, 1350
Add SIO, SIOPLUS, FIFO, ROW and VR I/O scheduler
Add sanjose, lazy, interactiveX, ondemandx, pegasusq, adaptive, adaptivex, smartass2, zenx and abyssplug CPU Governor
UMS (external), MTP (internal/external) and PTP all work, default to UMS, you can select MTP/PTP from "System Setting" > "Storage" > "Usb computer connection", I suppress old ICS UMS dialog so don't panic when it open and then suddenly close itself (no better solution for now, I do this because I don't want anyone to open it and press USB connect button. It'll unmount sdcard). <-- Don't add this fix, so don't bother with ICS UMS mount dialog.
How to install
Download rom and put it in sdcard.
Download Google Apps for CM10.2 and put it in sdcard.
Boot into recovery and Clear cache, dalvik cache and format /system. (Full wipe is recommended but not required if you came from CM 10.2)
Flash rom, then flash Google Apps.
Flash sdcard emulate patch at this point if you don't have sdcard (Skip this if you have sdcard)
Reboot.
After reboot if your gps doesn't fix properly please use FasterGPS to change gps config to your region
Download Link
2013/12/07
cm-10.2-20131206-UNOFFICIAL-p768.zip md5:24c54c3cf77f69604d83dd130fd40a6a
Bugs / known issues
CM 10.2 bugs
1080 video recording not work
Camera will not work if no sdcard in phone, please select emulate internal sdcard from installer
Version History
2013/12/07 - Fix sound record volume is too low - Thanks Artas182x
2013/12/05 - Update to CM 10.2
2013/11/28 - Update to CM 10.2 RC1
2013/11/21 - Bug fix
Fix bluetooth audio
Calling volume adjust
GPS config update
Disable Scissor renderer for SGX540
2013/11/17 - Update to CM 10.2 M1
2013/09/28 - Add kernel mod
OC - 300, 600, 800, 1008, 1200 Not OC by default, must select max 1200 in Performance menu
UV - 925, 1075, 1175, 1275, 1350
Add SIO, SIOPLUS, FIFO, ROW and VR I/O scheduler
Add sanjose, lazy, interactiveX, wheatley, ondemandx, pegasusq, adaptive, adaptivex, smartass2, zenx and abyssplug CPU Governor
UMS (external), MTP (internal/external) and PTP all work, default to UMS, you can select MTP/PTP from "System Setting" > "Storage" > "Usb computer connection", I suppress old ICS UMS dialog so don't panic when it open and then suddenly close itself (no better solution for now, I do this because I don't want anyone to open it and press USB connect button. It'll unmount sdcard).
Bugs
Camera will not work if no sdcard in phone
2013/09/16 - Initial release
Original Kernel 30.0.31 CM+ for OMAP board.
Jellybean 4.3
Swap internal/external sdcard + access sdcard via MTP
Home button wake phone (you can disable this in Display setting)
Reduce headset volume and increase speaker volume
Bugs
Camera will not work if no sdcard in phone
Credits
Cyanogenmod for ROM and P760 device tree which I modified it to P768
AntonX for serveral bugs fix.
artas182x for default sound profile values
HOW TO
Flash over last version
You can flash new version over old version
Put rom & gapps for CM10.1 in sdcard
Boot to recovery
Wipe cache & dalvik cache
Flash rom & gapps
Reboot
Flash this ROM over CM10.1
Put rom & gapps for CM10.2 in sdcard
Boot to recovery
Wipe cache & dalvik cache
Flash rom & gapps
Reboot
Enable OC, change I/O scheduler and change CPU governor
You need to enable developer mode on your phone, do it by
Goto "System Setting" > "About phone" > Tap 7 times on "Build number". You're now enable developer mode.
Goto "System Setting" > "Performance"
Enable OC by select "Processor" and set "Maximum CPU frequency" to 1200
You can also change CPU governor in that page, about what is it please refer to http://forum.xda-developers.com/showthread.php?t=1792369 and http://translate.google.com/transla...013/01/governor-scheduler-tcp-bejegyzest.html
You can change IO scheduler in "I/O scheduler", please read about it at https://www.vincentkong.com/wiki/android/android-io-schedulers/
Please test all changes before select "Set on Boot" because if something go wrong you can reboot your phone to revert it.
Cannot connect to wireless access point
This problem mostly occur when you got some error at first boot. The problem is error interrupt startup service to write proper MAC address data to file. Your wifi mac address will be 00:00:00:00:00:00
Use file manager or adb to delete /data/misc/wifi folder from your phone
Reboot (disconnect usb cable to make sure there're no error at startup)
Great, gonna test and report later.
EDIT: Reporting
Bugs:
1-CyanogenMod account remote wipe does not work, nothing happens. Location works fine btw.
2-When downloading (eg an app from market) under wi-fi, it eats all the connection. I cannot download another thing or visit a web for a couple of seconds. Sometimes it gives a time out error, other times takes a while to start to download. If you dont download many things simultaneously you wont notice this. This could a problem with my router, but i dont recall this happening before with my old Defy.
3-ADB wont work on Windows 8 x64 for me, tried different drivers but LG E2 USB device never gets installed correctly.
4-GPS can only see 2 sat and never locks position.
N°2, 3 and 4 are bugs that i experienced also on the p760 version of CM10.2
Aside from those bugs, everything else seems to work perfectly, great work.
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
donk165 said:
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
My battery life on 10.1.3 is better than stock (3G on) after use it for a while. After flash CM I notice that first day my battery life is not good as I expected. So I install cpu spy and wakelock detector to see what the problem. My phone don't go to deep sleep mode and that because of some apps (Line, Google keep, ...). I try to use it for a few day and the deep sleep problem gone, don't know why. The battery life is good when my phone enter deep sleep when I don't use it.
mato_d007 said:
Great, gonna test and report later.
EDIT: Reporting
Bugs:
1-CyanogenMod account remote wipe does not work, nothing happens. Location works fine btw.
2-When downloading (eg an app from market) under wi-fi, it eats all the connection. I cannot download another thing or visit a web for a couple of seconds. Sometimes it gives a time out error, other times takes a while to start to download. If you dont download many things simultaneously you wont notice this. This could a problem with my router, but i dont recall this happening before with my old Defy.
3-ADB wont work on Windows 8 x64 for me, tried different drivers but LG E2 USB device never gets installed correctly.
4-GPS can only see 2 sat and never locks position.
N°2, 3 and 4 are bugs that i experienced also on the p760 version of CM10.2
Aside from those bugs, everything else seems to work perfectly, great work.
Click to expand...
Click to collapse
All that bugs come from CM 10.2, I just build it for those who want to test. I'll rebuild it again in a week or so to add any bug fix from CM (if any).
For GPS there're some people in P760 thread posted that it work with some fix. I don't test it yet.
donk165 said:
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
In my case is like artit says, better battery life than stock (tough i use mostly wi fi and a bit of 3G), on deep sleep it only eats about 1% per hour, about 10.1.3 i dont see many diferences tbh, both of them works fine on our devices luckily. The battery life with the screen on all the time (playing games, surfing, messaging, etc) its 5 hours approx. Without touching it on deep sleep you can reach 24+ hours. Forgot to mention that i use many accounts (FB,G+, LINE, whatsapp, Skype, Cyano, Twitter) and i have auto sync activated always. Its a very good rom a good daily driver if you dont care much about the gps problems.
artit said:
All that bugs come from CM 10.2, I just build it for those who want to test. I'll rebuild it again in a week or so to add any bug fix from CM (if any).
For GPS there're some people in P760 thread posted that it work with some fix. I don't test it yet.
Click to expand...
Click to collapse
Yeah like i said, i experienced those bugs previously on the p760 version but i reported them here so everyone can see them. Thanks for taking the time to build this version.
I tried the suggested fix for GPS bug (modify the gps.conf file) but sadly, it didnt helped in my case.
Thank you for the replies guys. Ill try what you suggested about wakelock checking and using CPU spy, I'm sure I need to turn off a few Google apps or at least their syncing.
I'll try out this 10.2 version once I have everything fully setup to my liking on 10.1, then I can make a backup and switch back if needs be.
I wasn't aware of a GPS problem, but to be honest, I don't really use GPS.
Sent from my LG-P768 using xda app-developers app
Hey, how did you get the camera to work in CM10? Thanks
Sent from my LG-P760 using xda app-developers app
aloy99 said:
Hey, how did you get the camera to work in CM10? Thanks
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I replaced /system/vendor/firmware/ducati_m3.bin from P768 ICS stock rom.
artit said:
I replaced /system/vendor/firmware/ducati_m3.bin from P768 ICS stock rom.
Click to expand...
Click to collapse
I thought you said it only work with stock ROMs and not CM based ROMs?
EDIT: I found your patch, thanks a bunch
Sent from my LG-P760 using xda app-developers app
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
donk165 said:
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
Click to expand...
Click to collapse
I don't use this rom recently and build it only for testing so there may be bugs. I'll try to reproduce your issue and update source from CM to see if it's fixed.
IMO, stable version is more suitable for daily use. That's why I focus on stable version because I don't want to build CM nightly every 2-3 days.
donk165 said:
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
Click to expand...
Click to collapse
I can't reproduce your issue. Umm... struct at LG logo, it's seem that there're something wrong about kernel or initialization files. What steps you did to get that problem?
I do following
- CWM back my CM 10.1.3 RC2 (I did it last week)
- Reboot to recovery
- Do full wipe, cache, dalvik cache, user data/factory reset then format /system (in mount/unmount menu)
- Install CM 10.2
- Install GApps for CM 10.2, gapps-jb-20130813-signed.zip **** Not the same as for CM 10.1
- Reboot
- Login to CM account & google
- Install some app
- Do 2-3 reboot without problem
Then I test restore data from CM 10.1.3 RC2
- Reboot to recovery
- Advance restore from external sdcard
- Restore /data
- Reboot
- Re-login to CM account
- Phone work fine, but first reboot is longer than normal.
- Try to reboot 1-2 times, no problem.
Did anyone get this problem as donk165?
New build is up. I also include some kernel mod from my CM 10.1.3 for P768 rom and a sdcard re-enable patch for those that has no sdcard.
GPS work but took a long time. I'm not on this rom just test it and flash other one. If you have issue you can post here.
Re-upload latest release because it has minor error for UMS on windows. I fixed it now.
Do i is Necessary overclock to 1200?But i not want to overclock.i just set to 1008.
speed processor That is 2 dual 1024.
Is there a problem ?
bahram360 said:
Do i is Necessary overclock to 1200?But i not want to overclock.i just set to 1008.
speed processor That is 2 dual 1024.
Is there a problem ?
Click to expand...
Click to collapse
You don't need to OC, this rom default max frequency is 1008. If you don't want to OC just leave the value stay at 1008.
for save battery on this rom What I do?
and if overclock for always this will damage?
bahram360 said:
for save battery on this rom What I do?
and if overclock for always this will damage?
Click to expand...
Click to collapse
No need to do anything to rom configuration because it's a little bit Under Volt (UV) as I state in OP. It's should use less battery than official configuration.
If you still have battery drain problem, it almost come from phone not go into deep sleep mode. There're some app in your phone that keep phone awake. To find out what that app is, you can install "WakeLock detector" along with "CPU spy" to see if you phone goto deep sleep while screen off (CPU spy) and if not what is the problem (Wakelock detector).
For OC I don't use it but it shouldn't damage our phone. I also don't OC GPU because there're no preference for user to disable it.
I still can't get this Rom to stay booting. I can boot up after the install but once I reboot, it gets stuck on the LG logo. TWRP still works though so I can save my phone. But 10.2 doesn't like my phone. Its weird because 10.1 is fine.
My nexus also died when I put 4.3 on there, maybe 4.3 just doesn't like me lol.
Sent from my LG-P768 using xda app-developers app