So I recently Romed my Viewsonic G Tablet.
I followed this guide.
http://forum.xda-developers.com/showthread.php?t=865245
Everything is fine..except when I put a SD card into the SD slot the Tablet doesn't recognize it. It just tells the the internal Space not the SD card space.
I used ZPad Clean v3.0 for the ROM and I used cwmod_internal.zip instead of cwmod_microsd.zip
I then used my friend's G Tablet and put the SD card in it..It read it just fine.
So I wanted to test it out while it was rooted. (to double check)
I then Rooted my friends GTablet also. I rooted it the same way but the only change I did was have a SD card in the tablet the whole time. Still the same problem.
Is there any way to fix it? DO i need to use cwmod_microsd.zip....instead of cwmod_internal.zip??
I'm really confused if someone can help me that would be amazing!
Is there an APP that tells you the storage of your installed SD Cards?
Thank you
You mean flashed the rom when you say romed. Have you checked to make sure the sdcard is getting mounted? If there is no data on it you might try reformatting it in either of the g tabs. If you can get to a shell you might reboot, and look at the last 20 lines or so of dmesg. Insert the card and take another look at dmesg and see if the kernel is picking up the insert at all. If so it is likely just a mounting issue.
muqali said:
You mean flashed the rom when you say romed. Have you checked to make sure the sdcard is getting mounted? If there is no data on it you might try reformatting it in either of the g tabs. If you can get to a shell you might reboot, and look at the last 20 lines or so of dmesg. Insert the card and take another look at dmesg and see if the kernel is picking up the insert at all. If so it is likely just a mounting issue.
Click to expand...
Click to collapse
Well I reformatted it and I mounted it. Still nothing..How can I check if the kernel is picking up the SD card at all?
Would changing Kernel's fix the problem? I'm just using the Stock Kernel that the ROM came with.
Thanks
You were able to reformat and mount it via the g tablet with the zpad software on it? And even having done that it doesn't list it as having any free space?
muqali said:
You were able to reformat and mount it via the g tablet with the zpad software on it? And even having done that it doesn't list it as having any free space?
Click to expand...
Click to collapse
Not yet. So should I go to Storage and devices and unmount and format the SD card via the tab?
Try it on the tablet.
If I reformat the SD card wouldn't I loose the root? or no right because I did external
My understanding of root is that it modifies files on your tab/phone, not an external sd card. Worst case you lose root and reroot the device.
muqali said:
Try it on the tablet.
Click to expand...
Click to collapse
steveojp said:
Not yet. So should I go to Storage and devices and unmount and format the SD card via the tab?
Click to expand...
Click to collapse
When I tap click mount it says 11.3 gigs available.
when i unmount it says unavailable.
The card is only 8GB.
It should be internal storage 16GB.
SD card like 8gb.
Not sure what's going on.
If I format I think I'll wipe it all.
Ok, there is an internal 16GB, yes. Of which you have 11GB free. The SD card you're having the issue with is a separate uSD 8GB, right?
I'm meaning for you to try to mount/unmount or possibly format the 8GB SD card. If it isn't showing at all then the issue is something beyond it simply not being mounted.
muqali said:
Ok, there is an internal 16GB, yes. Of which you have 11GB free. The SD card you're having the issue with is a separate uSD 8GB, right?
I'm meaning for you to try to mount/unmount or possibly format the 8GB SD card. If it isn't showing at all then the issue is something beyond it simply not being mounted.
Click to expand...
Click to collapse
Yeah. It's a separate card that I plugged into it.
Was there ever a fix/resolution for this? I am having the same issue.
Everyone,
I've written this a bunch of times -- but here's one more:
/sdcard -- internal memory of the tablet
/sdcard2 -- miniSD card in the external slot
/usbdisk -- USB key slot
Put your recovery folder and update.zip on /sdcard, turn off the tablet, the press power
and volume + to initiate standard recovery.
Second, put your recovery folder and update.zip on a miniSD card. Edit the command file
in the recovery folder with Notepad to change the location from /sdcard to /sdcard2 and
save it with the name "command" (NO .txt or other file extension). Then boot
recovery with power/volume + and the OS will use the sdcard (assuming you don't
have a live recovery/update.zip file in /sdcard).
Third, if you can boot recovery to CWM but can get your ROM to work, go in recovery to
the mount menu and go down to the mount USB memory option and choose it.
Then plug your connector cable from the miniSB port to your PC. When you plug into
your PC an Explorer window should open and you should have a drive letter representing
the G-Tablet (it's G: on mine) on you menu. You now can select that
letter and you have access to your tablet memory (/sdcard). I've even had a time or two
when not a single file showed!!! I added update.zip and recovery and loaded
a ROM!
The tablet boot process apparently checks /SDCARD. If it doesn't find a recovery files there
it does the same check if you have a miniSD external card installed. The large USB slot is not
useable for booting or recovery so far as I have determined or read.
I hope this helps you.
Rev
I own a visio tablet which I rooted with vegan and clockwork. I have a 32GB SD card but when I check the storage is says 12GB on SD and 2GB on internal. The tablet should have 16GB + my 32GB. Anyone have an idea why it wont come up?
Is the fix above the best way to take care of this issue?
Can anyone kindly help? I've read through a lot of the links and can't find anything. I have rooted my device with clockworm v8, Vegan, got the market place to work and now I just need to figure out what is going on with my 32GB SD card. Should I format it with FAT32? How can I get it to be recognized?
Thanks in advance!
Formatting to Fat32 would be a good start ;-)
SD Card Dilemma
I have the VEGAn-TAB-v1.0.0B5.1 installed in my G-Tab and, with the exception of the SD card issue, things are just peachy! I've read the entire thread but, even with butchconners description, I seem to still be missing something. Let me try to structure this a bit differently...
1. The sdcard2 DOES show up in ifilemanager (with only one file, LOST.DIR) but NOT in SETTINGS. Since it does not appear in SETTINGS, there is no way to mount or dismount it (although if it shows up in the file manager and I can see the file on it, one might infer that it is already mounted.)
2. Even though I can see it in ifilemanager, I'm not so sure how I can actually USE it. It seems to me that the system would need to know (via SETTINGS) that it is there and I would have to tell the system where to put my files (i.e., sdcard or sdcard2).
3. When I connect my G-Tab to my Win7 PC, I only have access to sdcard AND NOT sdcard2. This seems a bit unusual since I have always had access to the removable sd card AND NOT the system memory on all my other devices (EVO, Blackberry, etc.)
My goal is to be able to set applications (some or all) to use the sdcard2 (at least for data) and be able to access it via the usb connection to my PC. Does anyone know how to accomplish this?...Has a solution for this already been posted somewhere?
Many thanks.
I am not an expert but the pc sees(?) only sdcard(internal) but no sdcard2(microsd).
Right, Guys?
I am now able to see both sdcard1 and sdcard2 using pershoots latest oc kernal released 4/25 when hooking up gtab via usb to computer. I am using Vegan tab gingeredition.
where does one find that kernel and how do i install it? Im running vegan ginger right nowand have the same sd card issue.
thanks!
Hi. Noob Android user here
So. I turned on usb storage and formatted the sd card from windows. I copied some files onto it and after i turned off usb storage it said "SD card is safe to remove" and i don't seem to be able to mount it back.
Thank you.
BobbyLoblaw said:
Hi. Noob Android user here
So. I turned on usb storage and formatted the sd card from windows. I copied some files onto it and after i turned off usb storage it said "SD card is safe to remove" and i don't seem to be able to mount it back.
Thank you.
Click to expand...
Click to collapse
try to format it thru phone
Tried that a couple of time and it didn't work. After a couple of reboots it worked now. Thanks.
Still got a question though.
What are the correct settings for formatting the sd card from windows?
Is it necessary to partition it from CWM? What are the correct setting for this?
LE: Ok. I got myself deeper in trouble. I managed to format the sd card from CWM. I mounted the sd card and copied update-cm-7.2.0-RC1-p500-signed.zip over. I wiped the phone's memory and tried to install CM7 and got the following error: "E: Can't open /sdcard/update-cm-7.2.0-RC1-p500-signed.zip (bad)". I also tried with update-oxygen-2.3.2-LGP500-KANG-signed_v2.6.zip but doesn't work either.
I was thinking of trying to partition the sd card from CWM but i'm afraid i will make it unable to mount back again and this time i got no android to format it from.
Also it seems that formatting the sd card from cwm doesn't really work. The files are still there though it says that it completed.
LE2: I managed to mount sd card from cwm and copied over a cwm backup folder i had in my computer. Takes a while to copy it like it really does something. But after i try to restore or remount usb storage the files aren't there anymore.
can you tell me why do you want to patition your sd card? do you want to create second partition (sd-ext) or what?
BobbyLoblaw said:
Tried that a couple of time and it didn't work. After a couple of reboots it worked now. Thanks.
Still got a question though.
What are the correct settings for formatting the sd card from windows?
Is it necessary to partition it from CWM? What are the correct setting for this?
LE: Ok. I got myself deeper in trouble. I managed to format the sd card from CWM. I mounted the sd card and copied update-cm-7.2.0-RC1-p500-signed.zip over. I wiped the phone's memory and tried to install CM7 and got the following error: "E: Can't open /sdcard/update-cm-7.2.0-RC1-p500-signed.zip (bad)". I also tried with update-oxygen-2.3.2-LGP500-KANG-signed_v2.6.zip but doesn't work either.
I was thinking of trying to partition the sd card from CWM but i'm afraid i will make it unable to mount back again and this time i got no android to format it from.
Also it seems that formatting the sd card from cwm doesn't really work. The files are still there though it says that it completed.
LE2: I managed to mount sd card from cwm and copied over a cwm backup folder i had in my computer. Takes a while to copy it like it really does something. But after i try to restore or remount usb storage the files aren't there anymore.
Click to expand...
Click to collapse
Just format your SDCARD from SETTINGS - STORAGE, after that proceed with the instalation of CM7 or whatever you want. Don't partition your SDCARD if you don't know how to do that and if you don't need partitioned SDCARD. It is not necessary to do that if you don't use an APPS2SD app, so don't waste your time with that.
The other day I had my SD card mounted to USB on my computer and I unplugged it directly without unmounting it. Stupid, I know... it was a mistake.
Since then I have an "sd card damaged" error and I am not able to navigate to the SDcard directory with Root Explorer. It says it's not mounted. If i try to take a photo, it says, to insert an SD card first.
Ive tried quite a few things and haven't been able to correct the error. This includes basically all approaches to formatting the SD card (recovery, etc...)
I currently do not have access to Odin.
any advice?
I bought a micro SD card and i am able to flash from that.
I am not able to save anthing directly on the phone though... web photos, etc... nada. Doesn't want to save to the microSD.
help.
thanks
well i cant explain it but i flashed a ginger bread rom and it's fixed.
i see the directories are differently organized, but still.... odd.
Hi all,
Few days ago rooted my i9100 after upgrade to 4.1.2. Now I noticed problems with memory cards. Some programs can't save logs (Torque) other (Zedge) tells me "Please insert SD card".
SD card is inside, and is fully working. Reformatted few time just to check. Everything looks to be fine, but there is still problem.
So what could happen?
In /mnt/ i have extSdCard, sdcard, and other folders.In /sdcard/ i see same files like in /mnt/sdcard/. But in /sdcard/ (or /mnt/sdcard) I don't have external_sd folder. Nothing like that.
Does it mean I have to create it myself and bind it to /mnt/extSdCard?
Why I need to do such things manually after root? Why stock rom and stock kernel doesn't do these things automaticly?
What is happening?
p.s
After I connect my phone to PC, I can't create folder in root of my phones internal memory. Writing blocked? Why the f....?
shadow_fi said:
Hi all,
Few days ago rooted my i9100 after upgrade to 4.1.2. Now I noticed problems with memory cards. Some programs can't save logs (Torque) other (Zedge) tells me "Please insert SD card".
SD card is inside, and is fully working. Reformatted few time just to check. Everything looks to be fine, but there is still problem.
So what could happen?
In /mnt/ i have extSdCard, sdcard, and other folders.In /sdcard/ i see same files like in /mnt/sdcard/. But in /sdcard/ (or /mnt/sdcard) I don't have external_sd folder. Nothing like that.
Does it mean I have to create it myself and bind it to /mnt/extSdCard?
Why I need to do such things manually after root? Why stock rom and stock kernel doesn't do these things automaticly?
What is happening?
p.s
After I connect my phone to PC, I can't create folder in root of my phones internal memory. Writing blocked? Why the f....?
Click to expand...
Click to collapse
Ok, I think I found the problem. I reformatted both, internal and external memory, and everything looks now to be fine.
Some kind of error was in Android folder. There was at least 10 files, that I couldn't copy, and I didn't care. Didn't copy whole android folder at all.
When I try to do things in TWRP it gives me an error that says E:Unable to mount storage. I thought maybe my sd card needs to be reformatted or something, so I went to the system settings once booted and looked under storage. At the bottom "Mount sd card" and Erase SD card are both greyed out and I cant select them. When I connect my phone to my pc it shows only internal storage instead of an internal folder and sd card folder.
All of my data on my sd card still shows up when im on the phone though and I believe all of my data on my sd card is showing up as under internal storage.
Anyone have any ideas as to whats going on?
yahar said:
When I try to do things in TWRP it gives me an error that says E:Unable to mount storage. I thought maybe my sd card needs to be reformatted or something, so I went to the system settings once booted and looked under storage. At the bottom "Mount sd card" and Erase SD card are both greyed out and I cant select them. When I connect my phone to my pc it shows only internal storage instead of an internal folder and sd card folder.
All of my data on my sd card still shows up when im on the phone though and I believe all of my data on my sd card is showing up as under internal storage.
Anyone have any ideas as to whats going on?
Click to expand...
Click to collapse
I had a similar issue today, my SD card was corrupted, this seems to happen with my SD card and android devices every now and then and I'm not sure why. Putting the SD card in my computer showed most of the files were okay, however, there were some that were messed up. Mine was pretty messed up so it is looking like I'm going to have to reformat it if repairing the corrupted parts doesn't work.
I just found a sd card adapter for my pc and used it. I ran chkdsk on the sd card and it found a ton of errors. If I reformat the sd card; what should I reformat it to? Fat32? That's what it is currently.
Edit-After running chkdsk f: /f on my sd card im able to select the mount and erase options now. It seems to have fixed all my issues.