I flashed a couple of different ROMs on my fascinate and got them set up and running beautifully. The problem is when I reboot I get FC like crazy. What am I doing wrong. Sorry if this is a stupid one, I came from OG Droid where everything is much more simple. Thanks..
which roms? 2.2 or 2.1? if 2.2, how did you get it? did you get the official update, or did you flash the odin package, or do it separately?
Evil Fascination 3.4.0 with wipe. Stock kernel. used the cwr found in this threadhttp://forum.xda-developers.com/showthread.php?t=1048380
Related
I can't seem to get Update All to work. I am rooted on cyanogen mod 7, running 2.3. When I click Update All most of the downloads/installs fail. and the eris is dog slow. Do I need to go back to updating one app at a time?
My Eris just hung then rebooted trying to use Update All. Oh well.
You don't say which ROM.
I had that problem with GSB, but I do not with CondemnedSoul's CM7 ROM. (Though, to be fair, GSB would eventually all update if I just kept doing it.)
Sorry tried a few different roms and coming to wits end
Just wondering which of these is a good stable rom
Tried most recently cm7 and miui the ran good but GPS was wonky at best
Always had to reboot to use
Just wondering what would be a good rom with decent performance that GPS works with.
TheArtiszan said:
Sorry tried a few different roms and coming to wits end
Just wondering which of these is a good stable rom
Tried most recently cm7 and miui the ran good but GPS was wonky at best
Always had to reboot to use
Just wondering what would be a good rom with decent performance that GPS works with.
Click to expand...
Click to collapse
I think GPS works in Bionix, it is a 2.2 rom by team whiskey. I have never tried it.
I was using cm7 and miui, I liked both, smooth and fast, but minor issues like constant reboot required to get GPS to work. So I'm back on stock deodexed/rooted kb5. GPS works ok, but definitely better than on GB.
TheArtiszan said:
Sorry tried a few different roms and coming to wits end
Just wondering which of these is a good stable rom
Tried most recently cm7 and miui the ran good but GPS was wonky at best
Always had to reboot to use
Just wondering what would be a good rom with decent performance that GPS works with.
Click to expand...
Click to collapse
In my opinion it doesn't get any better than TeamWhiskey Bionix-v 1.3.1 with Tigers BLood Kernel.
I'm running that. TeamWhiskey has never failed me.
i was on RevolutionRom JVP (gingerbread) with clockworkmod recovery, and i TI Backup'd.... manually wiped data, cache, dalvik, and then installed the simply honey zip file from recovery, and it wiped for me automatically (which was expected) and now during its boot screen where it says "powered bay talon sh kernel", the phone simply goes into a bootloop.
so now my question is, how do i go back to bionix-v (froyo) from the gingerbreaded bootloop? would i have to odin back to stock or something?
Lieu10ant said:
i was on RevolutionRom JVP (gingerbread) with clockworkmod recovery, and i TI Backup'd.... manually wiped data, cache, dalvik, and then installed the simply honey zip file from recovery, and it wiped for me automatically (which was expected) and now during its boot screen where it says "powered bay talon sh kernel", the phone simply goes into a bootloop.
so now my question is, how do i go back to bionix-v (froyo) from the gingerbreaded bootloop? would i have to odin back to stock or something?
Click to expand...
Click to collapse
If you didn't apply the Gingerbread bootloaders i think you can just ODIN to stock then flash. If you did to the Gingerbread bootloaders I think you have to ODIN the froyo bootloaders then Odin to stock.
donkilla said:
If you didn't apply the Gingerbread bootloaders i think you can just ODIN to stock then flash. If you did to the Gingerbread bootloaders I think you have to ODIN the froyo bootloaders then Odin to stock.
Click to expand...
Click to collapse
NO GB bootloaders are backwards compatible. No need to flash froyo bootloaders.
Sent from my SGH-T959 using xda premium
it really depends on you. im on miui right now because i cant go without gingerbread, but i also liked bionix. it was extremely stable
ya, it's... im also on MIUI, as 2.3 is the only os with proper copy past.... its just hard to get past the hacked drivers....
as far as the gps, i picked up a bt-gps brick that gets 1m accuracy, i can sit up in the window and works great... cost me $20.
I installed VillainROM 2.4.2 (ninphetamine-2.0.4 kernel) on my Bell Galaxy S2 phone a really long time ago and have been satisfied with it so I never bothered updating or anything. Now I'm a little bored with it and have been thinking about trying out ICS via CM9 nightlies. I just have a few questions before I give this a go since I'm out of the loop when it comes to modding:
1) To install CM9, do I just put it on my SD card and flash with CWM after doing a factory reset and clearing the cache? Or does jumping from a GB kernel/ROM to an ICS kernel/ROM require an extra step?
2) My version of CWM is probably old, so will I run into any problems trying to install CM9? I don't remember what the version is, but it's whatever version that came with the ninphetamine-2.0.4 kernel. If I need a more current version of CWM, how would I go about installing it?
I think that's all.. Thank you for reading.
As long as you follow the instructions, it doesn't matter what you're coming from. See full instructions here http://forum.xda-developers.com/showthread.php?t=1419102
Notice that for the CWM method, the third instruction is to flash a particular CWM recovery to avoid potential problems. There are instructions on how to flash on the link to it.
n125 said:
I installed VillainROM 2.4.2 (ninphetamine-2.0.4 kernel) on my Bell Galaxy S2 phone a really long time ago and have been satisfied with it so I never bothered updating or anything. Now I'm a little bored with it and have been thinking about trying out ICS via CM9 nightlies. I just have a few questions before I give this a go since I'm out of the loop when it comes to modding:
1) To install CM9, do I just put it on my SD card and flash with CWM after doing a factory reset and clearing the cache? Or does jumping from a GB kernel/ROM to an ICS kernel/ROM require an extra step?
2) My version of CWM is probably old, so will I run into any problems trying to install CM9? I don't remember what the version is, but it's whatever version that came with the ninphetamine-2.0.4 kernel. If I need a more current version of CWM, how would I go about installing it?
I think that's all.. Thank you for reading.
Click to expand...
Click to collapse
Easy enough upgrade path
If you are worried about doing this, flash the ODIN "resurrector" CM9 package - it should sort out wiping and everything else for you.
If you want to do it via zip, put the zip file on the SD, do a nandroid backup, wipe data and cache, then flash the zip and latest ICS gapps.
I don't think you'll have any issues with installing CM9 using that CWM. If you do, ODIN flash latest Siyah Kernel. Go to recovery and flash CM from there and you'll be fine
Thanks for the help guys. I went with the CM9 Odin Resurrection method and then updated to the latest nightly (20120511) with CWM.
I'm very impressed with what I see so far. I'll have to keep an eye on it, but I am a little worried about the battery life. (Though considering that I am on a nightly build, less than optimal battery life might be expected..)
Also, my signal strength seems to be fluctuating a bit, usually between 3 and 4 bars, although sometimes it will go down to 2 bars. The modem that came with this build is XXLPQ. Is there a better modem that I can try, or is it just a matter of going through all of them? I was on MUGKG2 previously and it was quite stable for me.
I think LPQ must be your earlier Modem which is retained after instlling CM9, if I am not wrong CM9 doesnt contain a modem.
try KE7 modem, I have got a very nice experience with KE7 on ICS roms
[Q] What kind of "loop" do i have? Happens with AOKP devil and glitch ICS and CM10
First I know the phone is not bricked. I can and have repeatedly ODINed to stock EH03, remembering to atlas and repartition as per droidstyle's guide. The problems begin when I go through the rest of the guide section 4, to get and ICS AOKP rom running. (This is staging for my question to be complete. Question at bottom.)
For whatever reason the phone was stuck to only boot into (red) recovery. I had the AOKP rom MS6-devil before and I think flashed another different devil kernel over that. The phone has been completely stable for months now. I tried data wipe/reset and wipe cache, and dalvik too. It still only rebooted to red recovery (sorry don't recall the exact version). This is when i decided to ODIN and start fresh.
Maybe some side questions. Is it ok to flash different devil kernels on the devil kernel rom? I assume yes but I just needed to run through my check list. When I ODINed back to stock did that automatically restore the phone to a stock kernel as well?
So the phone ODINs fine every time and ODINing cmw4 for CW7 and GB bootloaders too. (BTW when i flashed ICS rom several month back i dont think the guild had anything about ODINing bootloaders. Is this new?). 3 finger works and I'm in blue recovery 4, i wipe data and dalvik (I've done this more than 5 times some i also tried a cache wipe with same results).
What kind of boot loop is this?
I flash the ICS rom zip that i want and it starts but the status bar on the phone make a small amount of progress then goes black, reboots to the flash the Samsung logo then goes to some splash screen that shows Icy Glitch Kernel V14 if i try the AOKP M6 official, or a splash screen of Devil Kernel if i flash AOKP M6-devil or even with CM10 i see the splash screen of cyanogenmod. If i let the phone sit on the screens for a long while all i see is a continual booting to these splash screens.
I have mucked something up with the kernel and i thought ODIN would reset that each time. If I can know what kind of boot loop i face i can go to find the right threads or make a post in the right place to get this resolved.
Actually it's normal for that to happen, after you start the install it should reboot the phone to an updated recovery and continue the installation from there. At least that's what it did for me when coming from stock. How long did you wait? Are you getting any errors? If you're still using the stock sd card that could be your problem right there. Also, I highly recommend trying a JB rom, ICS is pretty stale at this point. AOKP just released JB Milestone 1
Good tips. I didn't know that's what it should look like. I was flashing for many hours and waited 20-30 minutes. The only happenings on screen were the splash screens flashing occasionally as if the phone were looping. Im guessing now that's normal in the flashing process. I've flashed the same roms before months ago and probably the process on screen I just forgot. Ill try again later when I have time and try some jb action and report back.
When going from stock to ics are you first flashing ths build 2? There are many versions of devil available some are built for ics and aome for jb only. It's important to know which one you are dashing cause the jb devil kernels have a specific partition layout needed to get jb to run on the fascinate. I could be wrong but anything higher than 1.5.xx is jb specific.
The devil rode a unicorn named jelly bean
forsakenone said:
When going from stock to ics are you first flashing ths build 2?
The devil rode a unicorn named jelly bean
Click to expand...
Click to collapse
You know I think that is it. I just blanked on doing that. I have build 1 and 2, b/c sometimes one works and one doesn't. I think I used 1 this time, but the first time I flashed ics i used build 2. Any way thanks. I am checkin out jb now too. cm10 is working great.
You didn't miss the step (to flash Build2 between EH03 & AOKP/CM10), the step was missing (temporarily) from the guide because some have found it to be unnecessary. I had the same bootloop as you when I didn't go through Build2 on the way to AOKP. Seems like the phone attempts to boot normally rather than into recovery to finish the installation of AOKP/CM10, and can't because it is midway through the installation. So did you state you had the problem when flashing CM10 as well? That's interesting, since some can skip going through Build2 and some can't. I thought maybe AOKP required it and CM10 did not... still trying to figure out what is different between phones that require it and those that don't.
Yeah I had it happen on cm10 too. I tried again but only flashed cm10 and no strange looping like I described. But I didn't flash any build before cm10.
Ok, I have a what i think is a rooted droid razr. I was on jelly-wizz rom and i went back to my stock rom with safestrap 3.11. My phone told me there was an OTA update that i did successfully and brought me to 98.72.16.XT912.Verizon.en.US (4.1.2). I had already manually updates the xmas leak so I was on 4.1.2 before the OTA. I erased the jelly-wizz rom slot and wanted to use the new Eclipse Razr JB v1.1 so I went threw all the steps and that and installed and activated the new rom. That put me into a boot loop. I then activated the stock rom and figured that I would start from scratch and unroot then root and start all over. The problem is i uninstalled Safestrap and didn't remove the recovery. I tried to reinstall safestrap and it takes but when i try to launch it it says safestrap has stopped and wont let me in. When i reboot, I get the safestrap menu saying it is disabled and can get into safestrap but any rom i install just puts me in a boot loop but I can boot to stock fine.
I just want to unroot and start from scratch and deleting all rom slots and factory reset does nothing. Any Ideas????
Use this to get you unrooted. It will take you back as if you never rooted, it will also delete your apps so back them up.
http://www.droidrzr.com/index.php/topic/12777-droid-razr-utility-xt912-jellybean-windows-mac-linux-all-in-one/page__pid__227369#entry227369
That was actually my next plan of attack. Worked like a charm. Made me unrooted and just had to start over from scratch which is fine. Nice that Matt has a root process built right into the app. I found out that the Eclipse JB Rom v1.1 can only be used on the xmas leak and if you do the official OTA then it just boot loops. That was the other half of my problem. Will just have to look for a new rom for the time being. Thanks!!
I think Jelly-Wiz has the same problem as the Eclipse. It just puts me in a boot loop as well. Guess I'll stay with stock for the time being
I had the same exact problem with the bootloop after updating to the Verizon OTA. I guess the kernel had some minor changes or something because any ROM built for the Xmas leak caused the same issue. I've been very happy using one of the CM 10.1 nightlies. Works like a charm even with the OTA update. I also heard of a ROM called FlyingJelly that works with the OTA update but I haven't tried it myself.
How do you do the cm10 mods. I've heard about them but haven't yet. Are they any different or better. I'd assume you use cm for them instead of bootstrap?
[Edit] I found out on droidrzr.com that there are actually 6 roms that work with the .16 kernel.
Aviator
Cyclone
Black Widow HDish***
Flying Jelly***
Rage ROM
Breakneck Blur***
*** These three have the circle widget from the Razr M (I'm guessing) I'm using the Breakneck Blur one and its really nice. Just over one page of installed apps and everything works great on it so far. I hate all the bloat that Verizon and moto put on these phones that you never use and cant uninstall.