Well here is the issue, I bought the HTC Thunderbolt awhile ago. I then rooted my phone but left the original ROM on it since the custom roms were not stable. I noticed verizon was pushing me some update and I just ignored them. I woke up today to see my phone rebooted with the screen on an exsclamation point. And then my Thunderbolt keeps rebooting itself now. I tried going into ROM Manager to download a Custom ROM but the phone just reboots before I can do it. I just installed Liquid Gingersense v1.6 rom with the MR2 OTA Radio which said it installed just fine after installing the Liquid Gingersense rom. I went through setting up the google account fine and after it booted to the main screen now my phone boots all over again, get stuck at htc screen for a bit then loads the phone fine then boots again. I am really not sure what the heck is going on. I am new to the MR2 OTA Radio since I cam from the Droid 1. So I hope it was not the install order I did it. I Have turned off the phone booted it with still same rebooting over and over issue. If anyone has idea's please let me know. Much appreciated. Thanks
I'm in the same boat. I have wiped the SD card and done a factory reset on the phone. It is no longer rooted, as I can't install and run apps requiring root permission. The update fails every time it tries to install, I also get the exclamation point android screen when the update tries to install. I'll take the update, I don't care. I just want a reliable phone again.
I'm seeing this issue come up a lot. Some of you folks seem pretty upset by it, and reasonably so. Search through the threads and you'll find you solution.
For those who are STILL running that antique and wildly obsolete ROM that the jcase rooting process leaves you with, I'd like to set a few facts before you. First of all, that ROM wasn't provided as a long-term daily driver. It's OLD and it's not very efficient with the battery. Second, simply because it's stock doesn't mean it's inherently stable. It's probably less stable than the custom ROMs out there. Third, the only ROMs really struggling with stability were the 2.01 RUU gingerbread builds. That build is obsolete, but not nearly as obsolete as the ROM that the rooting process leaves you with. The stability issues with the second OTA had nothing to do with the ROM, but rather, the radio that came with the RUU. In short, it's foolhardy to believe that custom ROMs are somehow inherently dangerous or unstable.
I'd like to suggest to whoever might be running the rooted ancient ROM the rooting process leaves you with to abandon it at your earliest convenience. Flash an MR2 radio, and if you like stock, use the stock rooted debloated ROM based on the 1.70 RUU. If you decide not to do this, and your phone auto-accepts the update, you'll probably lose everything on the phone trying to get it working again. Save yourself that hassle. Flashing ROMs isn't hard and people do it everyday.
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Rmbloungeact said:
I have had many phones and never had as much trouble than this phone is giving me. Every rom that does work when I flash them don't have any wifi or service. Even when I install gapps it is like it skips the setup and goes straight to the home screen.
I just came from a bionic and didn't think it would be much of a change to make this phone run like my bionic did. I have tried recreating rom slots with fresh installs and wipes on several roms, most of them cm10 based and even liquid smooth wont even install which is the rom I love the most. I have looked for several fixes but nothing seems to be working.
Is there something I am missing? Do you have to unlock the bootloader on this thing or something? Any help would be appreciated.
Click to expand...
Click to collapse
Wifi usually fixes itself after reboot, but for no-service I dont know.. Are you flashing correct version for your Razr (xt910/xt912), or flashing GSM patch if you have xt912 on GSM network?
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
LuckiestNut419 said:
Not to be redundant, but how ARE you flashing the ROMs? I've never had issues with connections (so long as I am using the applicable google apps, I have had to revert to a release or two earlier for proper operation in the past). I wouldn't recommend flashing ROMs via RSDlite, if that's the route you're taking. BMM and Safestrap (The latter can be achieved with Matt's Utility, it's what I use) are better options. Using a different partition on the internal storage, and retaining Stock rom. I never had any issues with Avatar (CM10.1 based). I'm about to try out AOKP. Good luck.
Click to expand...
Click to collapse
Well I have been using safestrap since I used it on my Bionic and I am already familiar with it. The one that is bugging me the most is not being able to flash LiquidSmooth 2.9. (I am on SS 3.53 btw) Also I am using the XT912 and already researched the difference between 910 ROMS before flashing.
When I try to install it the error comes up saying:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Warning: no file_contexts
set_perm: some changes found
E: error executing updater binary in zip '/sdcard-ext/Liquid-JB-v2.9-OFFICIAL-spyder.zip
Error flashing zip
I just wonder, if that thing is saying that the zip is meant to be an update for an existing version of LiquidSmooth. But on goo.im there is only 2.7, 2.8 and 2.9.
I've never seen that error (but I've been wanting to try LiquidSmooth, maybe I can duplicate the problem). I know with AOKP, I have to install on romslot2. For whatever reason. Have you tried any other slots besides 1?
EDIT
http://forum.xda-developers.com/showthread.php?t=2222535
The installation instruction for LiquidSmooth 2.9 say to install on RomSlot3, and only RomSlot3. I'll give it a whirl on 1 and see if the error is duplicated, but it shouldn't effect the install, regardless of the slot #.
http://goo.im/devs/liquidsmooth/spyder/Liquid-JB-v2.9-OFFICIAL-spyder.zip
This is the mirror I used to get the ROM.
Installed on Slot 1 without errors. Flashed gapps, wiped cache, restarted- wouldn't boot.
Wiped and deleted Slot 1
Installed on Slot 3 without errors. Flashed gapps, wiped cache, restarted- Success!
I never could duplicate the error you had, using the JB Liquid Smooth I got from goo.im
Also, for what it's worth, in the "Issues" category on the LS link from above, it said there was an autofix that would correct the wifi connectivity problem. Mine would never fully turn on wifi on first boot. Rebooted, worked perfectly. And the CM style setup went off without a hitch.
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Rmbloungeact said:
I also used goo.im to get mine. I tried all three versions of it but no success; all three got the same error code. I am wondering if the version of safestrap I am using is causing the error.
Click to expand...
Click to collapse
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Rmbloungeact said:
Just threw out the version 3.5x of SS I was using. Going to try 3.11 and see how it goes. Man, I hope this works, I just came back from using an iPhone for the last two months after letting my brother have my Bionic because they couldn't flash the iPhone on his service provider. I guess if it doesn't work I will be happy having android back nonetheless. Just want something other than motoblur.
Click to expand...
Click to collapse
So I scrapped 3.5x for 3.11 and the install went perfectly normal. Accidentally installed the wrong gapps package and had a force close assault from hell. Redid it with the right gapps and everything is up and running now. I am so glad to have it running and ready to set up now. Thanks for your help guys!
I don't know what happened. Or why it won't work.
When Safestrap was originally finished, I installed Hyperdrive without a problem. An update came, I downloaded and installed. It made it so I couldn't use HotSpot anymore. So, I figured it was the Rom, and I installed Jellybean Rom. I didn't like it. I tried to install the original Hyperdrive I had, and once its installed and reboots, the lights come on for one second and shut off. Downloaded the newest Hyperdrive, same issue.
The instructions say wait for 10 minutes. I did, and longer. (Range usually 20-40 minutes)
Last night I wanted to try again, (downloaded newest hyperdrive. I have sloooooow internet. Took 5 hours to finish). So, I tried installing today following the instructions, same issue. It installs and says everything is fine, reboot, safestrap pops up, loads normally through that, and the lights are on after like it starts with Stock, lights shut off, phone stops working.
When this happens, the phone does not respond to anything. Power does nothing. I waited 45 minutes the 3rd time trying to reboot after install. The phone will not turn on, respond, or anything unless I pop the battery out and put it back in. I can get back into Safestrap that way.
I really want to use Hyperdrive, but it just won't reboot for my phone.
I do have the Verizon i545 version, ME7, Safestrap, Rooted, and newest Hyperdrive Rom. Used the Safestrap Kernel, but the phone locks up.
I've tried default settings, different Rom settings, (2gb and 3gb), removing almost everything from install, adding what I want, adding what I like, etc. No combination of settings will let me phone boot into Hyperdrive.
Any thoughts?
Are you completely removing then re-creating the slot when trying all these flashes?
Are you flashing the ME7 kernel module.zip ?
I redo the rom slot each time and act like it's the first time.
And i can't install the module... Tried multiple times but it fails almost instantly through ss.
Sent from my SCH-I545 using xda app-developers app
Excessumcarcer said:
I redo the rom slot each time and act like it's the first time.
And i can't install the module... Tried multiple times but it fails almost instantly through ss.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Have you tried to re-download the module? Preferably on the computer then transfer to your ExtSDCard with the ROM.
So... The one I downloaded to my computer failed, but the one I did with my phone worked.
Still the same issue. Won't boot past the SS message.
Sent from my SCH-I545 using xda app-developers app
Excessumcarcer said:
So... The one I downloaded to my computer failed, but the one I did with my phone worked.
Still the same issue. Won't boot past the SS message.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
While you were trying to install did you notice if zip signature was checked if so uncheck when you install and uncheck when you install module other than that don't know what else to say. When i first started i found that to be my problem.
The zip signatures were not checked. : /
Sent from my SCH-I545 using xda app-developers app
And I've tried the older version Hyperdrive with the new ME7 Modules, still won't work. I can't understand because everything says it was successful and ready to go, but it just doesn't.
Also double checked my i545 version, it is still ME7 and not the new one. The new update is pushy and wants to be installed more aggressively than the ME7 did. Highly annoying...
Excessumcarcer said:
And I've tried the older version Hyperdrive with the new ME7 Modules, still won't work. I can't understand because everything says it was successful and ready to go, but it just doesn't.
Also double checked my i545 version, it is still ME7 and not the new one. The new update is pushy and wants to be installed more aggressively than the ME7 did. Highly annoying...
Click to expand...
Click to collapse
Get off 3.62 and go back to 3.6 if you can. use root uninstaller to get rid of the current SS and shut down normally. ( all in stock rom ) reboot to stock recovery and factory reset. put the 3.0 SS back on and install twrp through that and reboot fully. then you can go into SS and reboot to recovery and you should be good
EDIT: go back to 3.6 SS not 3.0 haha
EDIT 2: always wipe even after you just created the slot and flash the modules with HD10 and advanced wip the dalvik and the cache only. and chill for 10 and boot her up..... and make sure you didnt accdentally get the dreadful OTA!!!
!Led*Eyes! said:
Get off 3.62 and go back to 3.6 if you can. use root uninstaller to get rid of the current SS and shut down normally. ( all in stock rom ) reboot to stock recovery and factory reset. put the 3.0 SS back on and install twrp through that and reboot fully. then you can go into SS and reboot to recovery and you should be good
EDIT: go back to 3.6 SS not 3.0 haha
EDIT 2: always wipe even after you just created the slot and flash the modules with HD10 and advanced wip the dalvik and the cache only. and chill for 10 and boot her up..... and make sure you didnt accdentally get the dreadful OTA!!!
Click to expand...
Click to collapse
FINAL EDIT!!! always pick the safestrap kernel during the Aroma install
If I helped at all, shoot me a Thanks and happy flashing!!
!Led*Eyes! said:
FINAL EDIT!!! always pick the safestrap kernel during the Aroma install
If I helped at all, shoot me a Thanks and happy flashing!!
Click to expand...
Click to collapse
I promise you this makes no sense....and I think there was something wrong with the stock rom...only thing I can conclude. I did a factory reset and bricked my phone. I can't even get into Safestrap now...whatever the issue was with the custom rom is now the issue with the stock rom. So, i'm just going to wipe my phone and start over from scratch as that is the only available step. Ill let you know if it fixed the issue or not.
Excessumcarcer said:
I promise you this makes no sense....and I think there was something wrong with the stock rom...only thing I can conclude. I did a factory reset and bricked my phone. I can't even get into Safestrap now...whatever the issue was with the custom rom is now the issue with the stock rom. So, i'm just going to wipe my phone and start over from scratch as that is the only available step. Ill let you know if it fixed the issue or not.
Click to expand...
Click to collapse
Did you have 3.62? my buddy did and his phone wouldnt let him delete it! crazy. i dont like 3.62 but i was running HDrls10 like a champ. not a single issue. With the me7 base i want to say i didnt even flash the modules over it but i cant remember. but basically ( by what i wrote down) you were going to start from scratch anyway.. there is a better root out now anyway. use the dialer codes and get a REAL factory reset!! There are a lot of people that arent digging the 3.62..... it was causing bootloops for a while but there are def still some lingering issues i think.
!Led*Eyes! said:
Did you have 3.62? my buddy did and his phone wouldnt let him delete it! crazy. i dont like 3.62 but i was running HDrls10 like a champ. not a single issue. With the me7 base i want to say i didnt even flash the modules over it but i cant remember. but basically ( by what i wrote down) you were going to start from scratch anyway.. there is a better root out now anyway. use the dialer codes and get a REAL factory reset!! There are a lot of people that arent digging the 3.62..... it was causing bootloops for a while but there are def still some lingering issues i think.
Click to expand...
Click to collapse
Well...nothing has worked.
Update for everyone, I was using the older SS, 3.60.
I killed everything, put the original Verizon ME7 Rom on the phone, re-rooted, put 3.62 SS on, (Done like it), installed the HDrls10, Installed the module, (both successful), restarted, exact same thing. Right after Safestrap Enabled pops up, the phone goes dark and the battery needs to be removed and put back in for it to turn on again.
So, I tried something crazy and for whatever reason it worked as far as HD is concerned...but...I went outside of the instructions.
I have the HD rls9 Final. I installed it through SS, used the modded Kernel, (non SS), and restarted. It popped right up in about 45 seconds. (Wasnt working before I reset everything and started over)
I tried HD rls10 Final that way, and nothing.
I will be redownloading it tonight to make sure it isn't the download. (I have slow internet, itll take all night likely.) : /
If anyone is looking to actually uninstall SS (which you need to do to roll back a version) you need to use the commands hashcode has provided. Using Terminal Emulator on the stock side will accomplish that. Read up on hashcode's SS OP.
My phone will not accept HDrls 10....no matter what I try. It accepted HDrls9 without issue, minus the hotspot not working. But it will not accept HDrls10...
Im out of ideas...
EDIT: I downloaded the HDrls 10 rom from two locations, tried both, both failed this morning.
Excessumcarcer said:
My phone will not accept HDrls 10....no matter what I try. It accepted HDrls9 without issue, minus the hotspot not working. But it will not accept HDrls10...
Im out of ideas...
EDIT: I downloaded the HDrls 10 rom from two locations, tried both, both failed this morning.
Click to expand...
Click to collapse
All I can think of is somehow you are getting bad downloads. Have you checked the MD5s to match per the download sites listing?
lazer9 said:
All I can think of is somehow you are getting bad downloads. Have you checked the MD5s to match per the download sites listing?
Click to expand...
Click to collapse
I just double checked the MD5. It matches the download. How frustrating. Double checked the build, double checked the MD5, double checked install procedure, etc. It flat doesn't work on my phone, and there is no logical reason to it. I tried from a fresh build twice now, doing the rooting and SS install from stock everything.
It locks up right after SS, still.
Electronics hate me, it has been determined before. This is just further proof.
: /
So, I've done pretty much everything feasible. Guess Ill have to stick with an older HD or different rom. : (
Also, hotspot doesn't work HD 9 for me, (nor Jellybeans). I installed the module when I did the rom, but there is no hotspot for one. And two, when I download and use FoxFi, which I paid for to use on the Stock Rom before SS, it will try to turn it on and then it freezes and crashes.
All I want is a non-Verizon Rom with working Hotspot!!!! AHHHHH!!!! Looks like that aint happening.
Well played Verizon...well played. Perahps I should get an international phone and go to another company. Expensive, but tempting.
So, the final verdict for those following -
Hyperdrive 10 - Does not work on my i545 no matter what I tried.
Hyperdrive 9 - Works but the hotspot is glitched and froze no matter what I tried.
Jellybean - Works the same as HD 9
Synergy - Works. Everything on it works, hotspot, install, etc.
Not sure why the others did not work. But, for whatever reason Synergy works flawlessly for my i545. Installed and downloaded the same ways as the others, yet it worked.
: /
I was planning on trying a few others first, but Synergy claims to block Samsung from logging information from my phone. I realize this doesn't stop every company from doing it, but its the thought that counts. lol. So, Im trying this Rom out now. It's no hyperdrive, but it works.
After a BUNCH of tries I finally got it to work!!
I have a Verizon i545 with ME7. I basically started as if I'd never installed HD 9.1 in the first place.
Here's what I did.
1. Double check that your device is rooted. I used Root Checker Basic. I actually re-rooted my device just to be sure (I venture to guess it might have been unnecessary) and it worked.
2. I used a 4GB SD formatted to ex-fat and put the HD RLS10 AND the ME7 modules .zip file on it (Both on the SD)
3. I then booted into recovery.
4. Make a new ROM slot.
5. Name it whatever you like.
6. When you go to flash HD, hit the add zip button and select the ME7 modules.zip
7. When HD gets done flashing UNCHECK the "Reboot" box up top and then hit the reboot tab at the bottom right.
8. It will automatically flash the ME7 modules next. When it says 'Successful', then reboot.
9. Give it a few seconds and hopefully it will work for you as well. Good luck.
Latest installable version for Me7?
What is the latest installable version of HD for verizon locked Me7 bootloader, i currently have rls10.0 installed and ive tried 10.1, 10.2, and now 12 and none of them boot up.