How long should the first boot to recovery take? It's been over 40mins... is this too long. Have I bricked my phone? Any and all answers greatly appreciated.
-S
All it says is "Starting RSD protocol support" with the motorola symbol. Help... anyone?
-S
sbjones25 said:
All it says is "Starting RSD protocol support" with the motorola symbol. Help... anyone?
-S
Click to expand...
Click to collapse
When you are on that screen, press the vol down button to navigate to recovery. then press vol up to select it.
So try it all over. Turn off your phone. hold vol down button, then press and old power button. it should take you to that simliar screen. then now press the vol down to find Recovery. then vol up to select.
NguyenHuu said:
When you are on that screen, press the vol down button to navigate to recovery. then press vol up to select it.
So try it all over. Turn off your phone. hold vol down button, then press and old power button. it should take you to that simliar screen. then now press the vol down to find Recovery. then vol up to select.
Click to expand...
Click to collapse
The screen is locked to the Motorola Symbol with "Starting RSD protocol support" screen. How do I reboot the phone to do your instructions, with out damaging it? I have tried holding down the power button form more than 30sec and the phone does nothing. I have got the phone plugged into the wall. Should I take out the battery to get the phone to reboot? THANK YOU SO MUCH!
-S
Just PM some additional info.
Related
Hello everybody … I am a nooob for here …
Now I got a very BIG problem for my Moto Atrix Me860…
Things like that…
After I use the RDS to flash SBF to my Atrix Me860(without 4G version)
Unfortunately ….. It Bricked……
The screen show message …
SVF:105:1:2
Failed to boot 0x1000
And reboot continually….so that Atrix can’t connect to computer
So I can’t flash other SBF to Atrix
Does anyone have idea with this kind of Problem ….
Please I need any opinion to tell me how to do …
Please I want to save my Atrix …> <
As the devices is booting hold the volume up button, rhat sgould put it in rsd protocal or something like that then connect to pc and flash sbf.
Sent from my MB860 using XDA App
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
is the battery charged?
Tyro.Eh said:
As the devices is booting hold the volume up button, rhat sgould put it in rsd protocal or something like that then connect to pc and flash sbf.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
This should work. I had constant reboot cycle. To get into RSD I had to time holding the volume up button for when the reboot cycle started, before the green LED came on so that I could get to RSD. If you press the volume button at the wrong time it will reboot again.
could it be that you flashed a SBF to a ME860 and not a MB860?
tjjensen23 said:
is the battery charged?
Click to expand...
Click to collapse
Yes the battery has been charged~!
CaelanT said:
This should work. I had constant reboot cycle. To get into RSD I had to time holding the volume up button for when the reboot cycle started, before the green LED came on so that I could get to RSD. If you press the volume button at the wrong time it will reboot again.
Click to expand...
Click to collapse
Hey bor , you mean if I hold the volume up before the "Green LED " show up
I could get to the RSD mode ?? "Starting RSD protorcal....."
but I have been tried many many time ... no matter when I hold the volume up button ... It still reboot again and again ... ><
I think the problem is that Atrix "can not " get into RSD mode before it reboot ...
so that Atrix "can not" flash another SBF from computer ...
Does anyone have any idea for this problem ??
DarkRyoushii said:
could it be that you flashed a SBF to a ME860 and not a MB860?
Click to expand...
Click to collapse
ME860 but the SBF that I flash into Atrix is not for ATT version
OLYGC_U4_1.21.0_SIGNED_OLYMPUSGCTEST_P013_HWolympu s_1g_Service1FF
Am I flash WRONG version ... ><
Does anyone can help me ?? QQ
Please I need any advice…
Thanks everyone…
power device off. hold vol down & power button it will load into fast boot use vol down key to you see android recovery press vol up to enter. Now to will see an andriod with an exclamation point press and the bottom right (its hiddin on top on the search key)
of the screen to bring up options and then vol to wipe data/factory reset and press the ok button to select.
It should work. " hiddin on top on the search key " It is hidden button, hope u can find.
power device off. hold vol down & power button it will load into fast boot use vol down key to you see android recovery press vol up to enter. Now to will see an andriod with an exclamation point press and the bottom right (its hiddin on top on the search key)
of the screen to bring up options and then vol to wipe data/factory reset and press the ok button to select.
not sure post for u or not. one more time for u.
Does anyone can help me ??
You have the answer above
Sent from my MB860 using XDA App
no used.
Does anyone can help me ??
Pull the battery, put it in, hold volume down, power on and continue holding volume down until you see Fastboot on the screen. Then you can go into RSD and then you should be able to use RSDLite to flash.
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
Try holding volume down instead of up. If that doesn't work try it with the power button. Then you can get back to RSD protocol and flash the correct sbf to get you back working.
Sent from my MB860 using XDA Premium App
thanks for yout time
any more ideas?
pr
I would probably say you might have to do a fresh flash of 2.2.1, but the good thing is your phone will still be unlocked.
Pull the battery.
Before you put the battery back in, hold down the volume down button. Then, while still holding down the volume down button hit the power button. That will get you the fastboot prompt. You then just have to keep hitting down to get to RSD so you can reflash the 1.8.3 SBF.
Squeak22 said:
Pull the battery.
Before you put the battery back in, hold down the volume down button. Then, while still holding down the volume down button hit the power button. That will get you the fastboot prompt. You then just have to keep hitting down to get to RSD so you can reflash the 1.8.3 SBF.
Click to expand...
Click to collapse
That is incorrect. In order to get into RSD you have to press [volume up] and [power]. Let go of [power] when the screen turns on but keep [volume up] pressed. The screen will say something like [starting rsd protocol support] after a few seconds
Sent from my MB860 using XDA App
Squeak22 said:
Pull the battery.
Before you put the battery back in, hold down the volume down button. Then, while still holding down the volume down button hit the power button. That will get you the fastboot prompt. You then just have to keep hitting down to get to RSD so you can reflash the 1.8.3 SBF.
Click to expand...
Click to collapse
Think you are thinking of recovery.
RSD Boot is vol up + power button.
Recovery is vol down and scroll.
CaelanT said:
Think you are thinking of recovery.
Click to expand...
Click to collapse
You can get to it from down too. You just have to scroll through options until you hit RSD, then hit volume up. I totally forgot about the volume up + power to go directly to RSD support. Been doing to much CWM lately!
i keep seeing tut vids with everyone holding buttons down till you see the flashes etc. however if power down completely then just hold the vol down for 1 - 2 sec, then give the power button a quick push (no need to hold it down at all. just press it like you are turning it on) while continuing to hold vol down you'll go straight into boot loader (release vol down when you enter bootloader).
_tru_ said:
i keep seeing tut vids with everyone holding buttons down till you see the flashes etc. however if power down completely then just hold the vol down for 1 - 2 sec, then give the power button a quick push (no need to hold it down at all. just press it like you are turning it on) while continuing to hold vol down you'll go straight into boot loader (release vol down when you enter bootloader).
Click to expand...
Click to collapse
Erm, no disrespect intended, but isn't this how we've always gone into the bootloader? I didn't realize there was another way, outside of an APM in a ROM or through ADB.
Nite sure if this is what you're looking for but I use "quick boot" from the market.
One click for reboot, recovery, bootloader or power off.
Sent from my EVO using xda premium
I forget the button combination. But you can always do
Code:
adb reboot-bootloader
Following different tutorials on how to root my device, they all begin with instructing me to enter "download mode." They all seem to say that I need to press Power+Volume Down+Home and, when the warning screen appears, press Volume Up. Well, I hold down Power+Volume Down+Home (I check a video to make extra sure I was holding down the correct buttons) and all that the device ever does is continually display the initial splash screen, the reboot again. If I let go, the device goes into "manual mode" in which it prompts to reboot, update the device or factory reset it. Am I missing something?
Sorry, I looked at a few articles and could not find a solution.
mediumgrade said:
Following different tutorials on how to root my device, they all begin with instructing me to enter "download mode." They all seem to say that I need to press Power+Volume Down+Home and, when the warning screen appears, press Volume Up. Well, I hold down Power+Volume Down+Home (I check a video to make extra sure I was holding down the correct buttons) and all that the device ever does is continually display the initial splash screen, the reboot again. If I let go, the device goes into "manual mode" in which it prompts to reboot, update the device or factory reset it. Am I missing something?
Sorry, I looked at a few articles and could not find a solution.
Click to expand...
Click to collapse
first press vol down button and hold it and second press home button and hold it and at last press power button
mediumgrade said:
Following different tutorials on how to root my device, they all begin with instructing me to enter "download mode." They all seem to say that I need to press Power+Volume Down+Home and, when the warning screen appears, press Volume Up. Well, I hold down Power+Volume Down+Home (I check a video to make extra sure I was holding down the correct buttons) and all that the device ever does is continually display the initial splash screen, the reboot again. If I let go, the device goes into "manual mode" in which it prompts to reboot, update the device or factory reset it. Am I missing something?
Sorry, I looked at a few articles and could not find a solution.
Click to expand...
Click to collapse
ARRRGG. Figured it out. Was pushing the wrong volume button.
Such an ass. Was able to root from there. Thanks all!
Hello,
I'm trying to install custom ROM but I can't boot into recovery mode. It's just stuck on "htc powered by android" screen. I can boot into Android normally and also I Unlocked bootloader but can't do anything else because I can't enter recovery mode. My phone is HTC One M8s.
Thanks
If u try volume down + volume up + power key then release power key
SHA PHONEIX said:
If u try volume down + volume up + power key then release power key
Click to expand...
Click to collapse
Thanks for reply. When should I do that combination? While the phone is off or while is stuck on this screen? How long should I hold power key? Just for a second or until something happens?
milosdallas said:
Thanks for reply. When should I do that combination? While the phone is off or while is stuck on this screen? How long should I hold power key? Just for a second or until something happens?
Click to expand...
Click to collapse
1) First remove battery from your phone
2) then insert battery
3) then press volume down + volume up
4) then soft press power key
5) if ur phone is power on
6) remove hand from power key
7) don't release volume down + up key
SHA PHONEIX said:
1) First remove battery from your phone
2) then insert battery
3) then press volume down + volume up
4) then soft press power key
5) if ur phone is power on
6) remove hand from power key
7) don't release volume down + up key
Click to expand...
Click to collapse
Battery is not removable on this phone but I tried your steps, it is just booting android...
K reinstall twrp recovery mode then try this
SHA PHONEIX said:
K reinstall twrp recovery mode then try this
Click to expand...
Click to collapse
Same thing, it got booted up in Android but this time it says "Safe mode" in the bottom left corner (can't remember if it said that last time).
Power off ur phone before following the above key combination and wait until the screen turns back on.
Don't understand you, but I think you should go to download mode and reinstall TWRP.