Just a suggestion . - Optimus One, P500, V General

Hi for all ..
I have an idea and I want to discuss it with you , If I could replace the memory chip in the phone
p-500 Will you work with the device, I mean in other words you will recognize the software and will operate with it or is there a specific amendment to the software even works , Of course, the slide will be compatible with existing hardware device will be about mostly from the same manufacturer " Qualcomm "
Of course, I have not research yet, but I am almost sure that technically, forsooth, Electronics Technician and unable to make the amendment to the hardware, but do not guarantee the work of software with the new memory, what do you think the topic Is it logical or not? Thank you very much.
Sorry: I did not mention the main reason to replace the memory, I want to replace them with one larger than those in the device Sorry for not mentioning the reason in the beginning of the subject
majdi star

Please excuse my language
BUT
Please do not post such incomprehensible bull**** in the development section.

i think need also rebuilt spec board in bootloader

victortangocharlie said:
Please excuse my language
BUT
Please do not post such incomprehensible bull**** in the development section.
Click to expand...
Click to collapse
Sorry I do not get excited, sometimes I do not know of any section needed for the convergence of content so you find me with forums, I put the error.
Majdi star

scoppyxda said:
i think need also rebuilt spec board in bootloader
Click to expand...
Click to collapse
Is this possible, it requires a lot of work is that it is easy ..
Thank you very much my dear ...
Majdi star

majdi star said:
Sorry I do not get excited, sometimes I do not know of any section needed for the convergence of content so you find me with forums, I put the error.
Majdi star
Click to expand...
Click to collapse
Whatever..............

Its not so easy mate
To replace a hardware is on hell of a job.
Somehow you did that then you need to write a firmware according to its own personal instruction set for it to work properly that'll take months to do so.
you need to decode each and every instruction for each and every component of the phone.
you need to write every instruction of even smallest possible thing it can do in a program then make that program compatible with the firmware.then maybe it'll work.
I'll suggest you replacing the processor only put a tegra2 on the o1...
Sent from my LG-P500 using XDA App

Related

Someone please help me!!

i see all these nice incons and i have no clue how u install them , i really would appericate it if someone could list step by step how to install them thank u so much
Here my friend take a look at this thread! I don't think I can explain it much better!
http://forum.xda-developers.com/showthread.php?t=567080
What are those "Help me!!!!!!!"-Threads always supposed to be? Is it so difficult to choose a proper ThreadTitle which informs a potential reader about the content of the Thread. And why the hell must it sound like you have bricked your phone completely when u just want to ask a minor standard-question (without even using the searchfunction by the way... ). Please Guys keep this forum clean and informative.
Thanks
Yes, it's crazy to see all those questions without people make the effort to use the search function!
im not that good on here sorry for the quesions but i have one more how do u flash your cabs and xmls again im sorry and thank u alot
dunnboy9984 said:
im not that good on here sorry for the quesions but i have one more how do u flash your cabs and xmls again im sorry and thank u alot
Click to expand...
Click to collapse
????
Flash is fore Rom's!!
Cabs are installed!!
Just download the cab's you need, copy to your SD and pres on install! Don't see the difficult in it!
Oh yes fore your safety, install the cab on the device's memory!!
no i understand all of that , im talking about when i save my new icons to a folder then go in and copy them , i needed to knw where i paste them so they will show up in the start menu
^^^ Did you actually really read the answer in posting #2?
I kind of doubt that. Because your new question implies you haven´t.
Please follow the link, read everything, download and try the app - and there you go.
so friendly
Wow xda-developers is so friendly!! Whats with all the jumping on people. If someone is new they dont know how it works in here. So just let them know , in a nice way. The responses here sound like you dont want any new people here. Fine any new person who reads this head over to www.ppcgeeks.com . The people are much nicer there and wont get pissed if you ask a question.
zarpy said:
Wow xda-developers is so friendly!! Whats with all the jumping on people. If someone is new they dont know how it works in here. So just let them know , in a nice way. The responses here sound like you dont want any new people here. Fine any new person who reads this head over to www.ppcgeeks.com . The people are much nicer there and wont get pissed if you ask a question.
Click to expand...
Click to collapse
Sometimes (a lot of) people just don't read nor search and expect to be spoon-fed the information they need (because they would not spend the effort to do/find it themselves). I don't know about the majority but to me that is just laziness and quite annoying.
AS FOR THE QUESTION POSTED, if you actually do go to the link posted above, the information is there and any questions you might still have is better directed in that thread rather than creating a new one such as this with a SOMEONE PLEASE HELP ME!!!! subject line.
I thought moderators are deleting threads such as this.
zarpy said:
Wow xda-developers is so friendly!! Whats with all the jumping on people. If someone is new they dont know how it works in here. So just let them know , in a nice way. The responses here sound like you dont want any new people here. Fine any new person who reads this head over to www.ppcgeeks.com . The people are much nicer there and wont get pissed if you ask a question.
Click to expand...
Click to collapse
Nobody is jumping on anybody.
The truth is harsh sometimes. Obsolete and redundant questions and answers are definitely not something any forum is searching for. It´s called spam.
Ignoring the correct answer (which in this case was given in the very first answering posting) isn´t a beginners mistake, imho. It doesn´t show respect to the user who posted the link.
If me pointing out this very fact was too rude, I am sorry. But to be honest, I am tired of recurring subjects which could easily be solved using the search function. I did the same when I came here as a beginner. Oh, and btw, please check the forum rules and the new stickies.
Last, but not least, in the other forum you mention, it might be a different story sometimes. People get ignored there, and some statements are much harsher than anything I have personally ever seen here.
We are all human beings. Cool down.
info
Ok yes the link provided was good information. I personally just PM someone when I have a question. I been here for a while so i have that option because people will PM me back.
My point is some people or smarter than others. Iam a developer myself, so alot of problems or questions I can figure out on my own. But some people are not that smart and this phone can very easily expose that fact. So some new people might need more help , and sarcasm wont help anyone. They dont call this a smart phone for nothing. Whats simple to you and me , might be complicated to others.
zarpy said:
Wow xda-developers is so friendly!! Whats with all the jumping on people. If someone is new they dont know how it works in here. So just let them know , in a nice way. The responses here sound like you dont want any new people here. Fine any new person who reads this head over to www.ppcgeeks.com . The people are much nicer there and wont get pissed if you ask a question.
Click to expand...
Click to collapse
I don't see what's your problem Sr.
First of all the moderators have create a special sub-forum fore this Q and A.
secondly I can understand that maybe using the searchfunction is not easy to everyone, and certainly not if you don't know what to search!
But after the moment I post him the correct link to his question, a hole thread that give you bay the way a hole step by step explanations I don't know how we can give a better treatment!?
but after that the person came back with a question what is tread in there!!!???
I don't know sr but there is a end on everyone's goodness!
nice is a good word
Ok I understand its annoying when newbies just dont get it. As for a problem I dont have one , and maybe I came off harsh. My mistake too.
When the OP said flash a cab , that alone told me he isn't computer or phone savy. He obviously is way over his head with this type of phone. He probaly got lucky when he found this website. Iam sure he was excited that he could ask a question because he was lost. The comment that pissed me off a little was telling him its safer to install to the phone. Thats definitally not right at all.
The only reason I said anything was because I could tell the OP was really lost and confused. By reading his comments I could tell he never had anything like this before. So for his 1st venture into the wonderful world of windows mobile, I just didnt want him to be discouraged. I want him to enjoy the phone and mod it to the fullest extent.
the reason way I have wright "installed cabs on your device" is because there are some cab's that don't have a correct installation pat. And like I saw it was a new member who posted this thread I give him this tip, to be sure he don't installed it on SD.
I don't see what is wrong with that!?
installation
1) Installation on a unstable OS like windows mobile ,will cause slowdown in the future after alot of apps are installed. Its nobodys fault but HTC who made the phone.
2) If there is a virus , you can delete it easier on storage card.
3) If you have to hard reset the phone , you lose everything. Thats why I recommend storage card.
See how nicely I spoke , I gave point by point reasons without sarcasm. We are all happy now.
It´s a bit sad to see the development of this thread.
Something which was not "bashing" turned into bashing after a posting was made, citing the "bad word". In the meantime, there was even a thread opened to discuss that very question.
I think both threads should be closed. They don´t belong into the "HD2 Themes and Apps" section anyway.
And, imho, it is recommendable to install system relevant items like icon cabs to the device, I definitely second kurt-willems´ advice. On the other hand, CSMI or JWMD Icon Changer, the possible programs to change icons manually, can go onto the memory card.
zarpy said:
1) Installation on a unstable OS like windows mobile ,will cause slowdown in the future after alot of apps are installed. Its nobodys fault but HTC who made the phone.
2) If there is a virus , you can delete it easier on storage card.
3) If you have to hard reset the phone , you lose everything. Thats why I recommend storage card.
See how nicely I spoke , I gave point by point reasons without sarcasm. We are all happy now.
Click to expand...
Click to collapse
50%
But I don't see sarcasm on my post, maybe my bad english, or maybe my culture.
That was all I had to say.
zarpy said:
1) Installation on a unstable OS like windows mobile ,will cause slowdown in the future after alot of apps are installed. Its nobodys fault but HTC who made the phone.
2) If there is a virus , you can delete it easier on storage card.
3) If you have to hard reset the phone , you lose everything. Thats why I recommend storage card.
See how nicely I spoke , I gave point by point reasons without sarcasm. We are all happy now.
Click to expand...
Click to collapse
I don't want to wade in on the bashing, but to make a comment like your first one, "unstable OS", sounds to me like you have something against windows mobile, and to post in a thread of someone looking for help that their os is just "Unstable" is not really help ...
I am sure there are a lot of people that use WiMo daily and would not agree that it is "Unstable"
I personally install almost everything to phone memory because this phone can take it, and my phone runs just fine...
With this phone there is a bigger chance of the SD card getting corrupted than the OS ...
life is funny
Its very funny to me now. I just responded and I didnt bash anyone. Its funny how people can talk to someone anyway they like, but cant take it when someone talks to them the same way.
If you didnt like the way I responded, maybe you shouldnt that way to others. Very simple have a nice day!!!

[Q] Advanced Settings on the SetCPU App... what does this mean?

On the Advanced Tab in Settings in the SetCPU App it shows this stuff:
....................................
[✓] Set on Boot
^- (By default this is blank but can be checked).
_________________________________________________________
Sampling Rate (150000µs-150000000µs)
Up Threshold (1%-100%)
Ignore Nice Load (0/1)
Powersave Bias (0-1000)
.....................................
So what does all this part mean, what does this stuff do?? Should I change any of these numerical settings to get better results out of my A101IT or should I just leave this part all alone?
Sorry to say that, but if you know so little about the System, you should even not use SetCPU.
And also this only works if you have rooted you device, did you do that?
Yup, sure did and have it fully and permanently rooted.
fzelle said:
Sorry to say that, but if you know so little about the System, you should even not use SetCPU.
And also this only works if you have rooted you device, did you do that?
Click to expand...
Click to collapse
I think that was a valid question and didn't deserve such a condescending answer.... Why not just answer or post a link rather than being rude........
That's what I was thinking...
Is it too much to ask Admin to ban the user (fzelle) from XDA permanently/for a short while??
I really don't give a $hit about it. I'm offended more-so with your literacy (grammar) in the English Language. Maybe that's because you're from East/West/Northern Europe but that still doesn't give you the right to talk down to me just because I ask a question that you may or may not know? And if you're from the U.S./Canada, that's even more sad. If you're French-Canadian or just straight from France I'm not surprised by the remark because I've been to France enough times to know how men can be over there.
Illiteracy/Grammar is a pet-peeve of mine....
Wolves4Ever, I think fzelle wasn't rude at all. If the person couldn't visit www.setcpu.com or just search this forum I think he'd better leave everything as is.
Well, "let's start a war (said Maggie one day)". Troll detected...
I believe that what fzelle meant is that changing CPU settings surely requires deeper knowledge of the OS and HW than a normal user has (me included)
spicy_puerto_rican said:
...
I've been to France enough times to know how men can be over there.
...
Click to expand...
Click to collapse
Also, who is offending who? fzelle to you or you to ALL the French men?
enteo said:
I believe that what fzelle meant is that changing CPU settings surely requires deeper knowledge of the OS and HW than a normal user has (me included)
Also, who is offending who? fzelle to you or you to ALL the French men?
Click to expand...
Click to collapse
I also think so!
Fzelle insulted me to begin with....
Had I known SetCPU was an actual website I would've gone there and found the answer to my question and wouldn't have bothered asking in the first place? I didn't think there was a site for it either? So sue me for being a newbie, I'm just trying to learn and know as much as some people on here.
1) Your question may not have been answered yet but you've been directed to the homepage of the product where such information can be found.
2) I was also kind of surprised by your remark about the French (not French myself but generalization of cultures is not accepted anywhere, not now, not in the future). Please try to understand this.
3) SetCPU is considered a product to allow advanced modification of your system (and possibly even voiding the warranty). This is why people tend to explain that if you do not know how to find out the exact process of such application/modification you should stay clear from it. It doesn't hurt to learn however and this is why you should investigate it yourself by going through the homepage stuff
None of the above is intended to offend anyone, if it has, please understand that I have a language barrier to cross as you should with many statements on a multi-cultural forum.
spicy_puerto_rican said:
If you're French-Canadian or just straight from France I'm not surprised by the remark because I've been to France enough times to know how men can be over there.
Click to expand...
Click to collapse
Should I feel offended and request a ban from XDA with this comment?
(just kidding!)

PLZ Help WIth Stock Performance Fix

Can someone help me Do the performance Fix for stock 2.2.2 On 351 , i have streakmod , i tried getting the file 3.1.5 and did install it , but my dell goes into bootloop wen i restrt , plz can anyone guide Me
Well, if you actually had read the thread where you pulled the performance fix from you would have known that the performance mods only work on ROMs 309, 315, and 318. It's absolutely no surprise that your Streak bootloops when you install the performance mod, since you're replacing a newer kernel with an older one. There are no performance mods for any ROM newer than 318, so do not install the performance mod.
Strephon Alkhalikoi said:
Well, if you actually had read the thread where you pulled the performance fix from you would have known that the performance mods only work on ROMs 309, 315, and 318. It's absolutely no surprise that your Streak bootloops when you install the performance mod, since you're replacing a newer kernel with an older one. There are no performance mods for any ROM newer than 318, so do not install the performance mod.
Click to expand...
Click to collapse
My words weren't going to be as nice as yours Strephon
Must have been a weak moment on my part. This after all is the same poster who couldn't figure out how to get StreakMod Recovery on his Streak yet somehow rooted his phone.
thnx for that xD ,
yes i figured the version problem Out after getting 2boots loops xD , i rechked my version lol n Found Out xD , The Joke was On me
is there anything i can do for stock Rom ?!! and one more question , if i goto simple streak 1.2 , than can i come back to my stock wid just using the recovery that i made of the orignal rom ?!!
janarioo said:
thnx for that xD ,
yes i figured the version problem Out after getting 2boots loops xD , i rechked my version lol n Found Out xD , The Joke was On me
is there anything i can do for stock Rom ?!! and one more question , if i goto simple streak 1.2 , than can i come back to my stock wid just using the recovery that i made of the orignal rom ?!!
Click to expand...
Click to collapse
Do some more reading my friend and you will answer all those questions
Man, u wrote all that , u should hve said yes or no , can anyone tell me can I flash stuff in stock rom , and frm which roms I can come bck to stock through the recovery image that I made using streakmod
Sent from my Dell Streak using xda premium
Answering your last question first, a nandroid backup will restore the Streak to the way it was the moment you did the backup, with the exception of the baseband and amss. Those two things are only restored with an official Dell ROM. So it should not matter what ROM you switch to, though I recommend caution if you go use StreakDroid 2.x.
What stuff are you looking to flash in a stock ROM? If you have StreakMod as your recovery you can flash from it, and are in fact supposed to when rooting the Streak, which I noted in your other thread. So it is possible to add stuff to a stock ROM using StreakMod.
Finally, addressing your comment which I believe was directed at me, virtually everything you have asked has been addressed in other threads, which is why in your other thread (already linked) I gave you a link to the sticky and told you to read up. I'm not here to hold your damn hand.
P.S. Proper English please? "You", not "u". "Please", not "plz". Typing like that shows us that you're in a hurry to do something that requires some time and effort. Not to mention it's f**king more difficult to read than if you spelled it out like you were taught in grade school.
Strephon Alkhalikoi said:
Answering your last question first, a nandroid backup will restore the Streak to the way it was the moment you did the backup, with the exception of the baseband and amss. Those two things are only restored with an official Dell ROM. So it should not matter what ROM you switch to, though I recommend caution if you go use StreakDroid 2.x.
What stuff are you looking to flash in a stock ROM? If you have StreakMod as your recovery you can flash from it, and are in fact supposed to when rooting the Streak, which I noted in your other thread. So it is possible to add stuff to a stock ROM using StreakMod.
Finally, addressing your comment which I believe was directed at me, virtually everything you have asked has been addressed in other threads, which is why in your other thread (already linked) I gave you a link to the sticky and told you to read up. I'm not here to hold your damn hand.
P.S. Proper English please? "You", not "u". "Please", not "plz". Typing like that shows us that you're in a hurry to do something that requires some time and effort. Not to mention it's f**king more difficult to read than if you spelled it out like you were taught in grade school.
Click to expand...
Click to collapse
Strephon, how much ya wanna bet HE'S STILL clueless because he refuses to do anything on his own, the most searching he did was google xda and the most effort he put in was creating his account...
cdzo72 said:
Strephon, how much ya wanna bet HE'S STILL clueless because he refuses to do anything on his own, the most searching he did was google xda and the most effort he put in was creating his account...
Click to expand...
Click to collapse
My friend i serched everything GOogled all , Chked youtube , Chked StreakSmart,xda,some other streak websites , etc etc but , it wont b bad if someone gives me answer and i dont end up bricking my device
janarioo said:
My friend i serched everything GOogled all , Chked youtube , Chked StreakSmart,xda,some other streak websites , etc etc but , it wont b bad if someone gives me answer and i dont end up bricking my device
Click to expand...
Click to collapse
Then you need to do it again "friend", the answers are there, were they not there then myself and most of the other users here wouldn't know how to tinker with our devices either
So bottom line, search some more, read some more, as you can see, no one is willing to spoon feed you the answers that are out there in 100s of other posts and threads
cdzo72 said:
Strephon, how much ya wanna bet HE'S STILL clueless because he refuses to do anything on his own, the most searching he did was google xda and the most effort he put in was creating his account...
Click to expand...
Click to collapse
He's just like another noob I dealt with recently. He wanted to upgrade his Streak from 2.2 to 2.2.2. So, like a good egg I provide him the link to the sticky and mention to him to use the search engine next time. The response was essentially this:
"why is this section here if all you're going to tell me is to google stuff?"
Then as a follow up, the noob comments that he's looking for a "professional's answer". After I got a laugh out of that last one and explaining to him exactly how things work around here, he tries to apologize for "hurting" me and finishes up with this gem:
"I want to update my Dell and nothing more. If you can help me or want to help me then give me the right links." (emphasis mine)
While my reply was rather civil in that I told him if he wanted one on one tech support I charge for it, what annoyed me almost as much as his original reply to my posting the sticky was him begging for "the right links". Begging for the right links isn't going to change the fact the links are in the sticky! It's no wonder that developers are leaving this site in droves when they see drivel like what is in this thread from people who don't want to take the time and energy to learn about their damn devices so they can actually do the work themselves!
Strephon Alkhalikoi said:
He's just like another noob I dealt with recently. He wanted to upgrade his Streak from 2.2 to 2.2.2. So, like a good egg I provide him the link to the sticky and mention to him to use the search engine next time. The response was essentially this:
"why is this section here if all you're going to tell me is to google stuff?"
Then as a follow up, the noob comments that he's looking for a "professional's answer". After I got a laugh out of that last one and explaining to him exactly how things work around here, he tries to apologize for "hurting" me and finishes up with this gem:
"I want to update my Dell and nothing more. If you can help me or want to help me then give me the right links." (emphasis mine)
While my reply was rather civil in that I told him if he wanted one on one tech support I charge for it, what annoyed me almost as much as his original reply to my posting the sticky was him begging for "the right links". Begging for the right links isn't going to change the fact the links are in the sticky! It's no wonder that developers are leaving this site in droves when they see drivel like what is in this thread from people who don't want to take the time and energy to learn about their damn devices so they can actually do the work themselves!
Click to expand...
Click to collapse
Yeah I remember reading through that, I LMAO at that one... and you are right, devs are leaving XDA in droves, not just from the Streak but from all the device threads because the moderators are more concerned with the language we use to address the noobies than doing THEIR job as moderators and keeping the newbies in line, we the experienced users don't need any moderation, it's the noobs that need the guidance and should be repremanded for posting NEW threads about worn out subjects...
Sorry guyz My Bad
cdzo72 said:
Yeah I remember reading through that, I LMAO at that one... and you are right, devs are leaving XDA in droves, not just from the Streak but from all the device threads because the moderators are more concerned with the language we use to address the noobies than doing THEIR job as moderators and keeping the newbies in line, we the experienced users don't need any moderation, it's the noobs that need the guidance and should be repremanded for posting NEW threads about worn out subjects...
Click to expand...
Click to collapse
Even I occasionally make boneheaded posts, such as asking what the Dell Settings Provider.apk actually does and whether I actually needed it. No one answered the thread, I believe because it was thought to be an obvious question that didn't need an answer. So I experimented and deleted the file. I didn't have any issues, which is a good thing. I did however search before I made the post and did not find anything either.
We did not have the benefit of the sticky nor The Manii's list of safe to remove apps to make it easier on the noobs. There is nothing wrong with noobs asking questions, but you know full well that we're getting too many noobs lately running to the site for help after doing something wrong instead of searching for the answer before posting. That kind of BS needs to stop.
To the OP: keep asking questions, but make sure you use the XDA-Developers search engine instead of Google to find things before you post. It works better.

[Q] Display colour quality?

Hello everyone.
First of all, I don't even know if this question is noobish or not, but I just can't solve this "problem" (or not?)
So, the thing is, I don't like color "fading" on my GS3 display. I see layers that fade out one below eachother, and it is deffinitely not right. For example when I start some app like Solid Explorer, the second before the main page loads I see these annoying "layers". And also on any image where the color has to fade out into another color, it is also noticable. Then, as I guessed, it depends on kernel.
As I said, I don't know what kind of question is this ) and I don't know if someone knows about that but still, do you know something about that?
PS. I attached a screenshot of solid explorer before it loads the main page so that you could know what I'm talking about.
Thank you in advance
it's called color banding, try a custom kernel
Glebun said:
it's called color banding, try a custom kernel
Click to expand...
Click to collapse
I tried every god damn kernel I found, the best of them was Siyah 1.9.1 but it's not perfect either. I remember when I was on stock there were no such problems and color banding was perfect. Do you know any kernel? What do you use? I have samsung I9300
There's no best and watch your language.
b-eock said:
There's no best and watch your language.
Click to expand...
Click to collapse
What he said. There is no reason for that type of speak here.
b-eock said:
There's no best and watch your language.
Click to expand...
Click to collapse
I didn't ask which the best kernel is, I asked which would solve the problem
zelendel said:
What he said. There is no reason for that type of speak here.
Click to expand...
Click to collapse
BTW, what kind of language are you talking about? I don't understand?
toka1232010 said:
I didn't ask which the best kernel is, I asked which would solve the problem
BTW, what kind of language are you talking about? I don't understand?
Click to expand...
Click to collapse
Thats the thing. No one can tell you what one will work for your device as each and every device is different. So you will have to test them out.
As for the language. The whole GD is not needed. While I dont really care this is a world wide forum and we need to respect everyone.
zelendel said:
Thats the thing. No one can tell you what one will work for your device as each and every device is different. So you will have to test them out.
As for the language. The whole GD is not needed. While I dont really care this is a world wide forum and we need to respect everyone.
Click to expand...
Click to collapse
As I understand, the part of the main aims of this website is to share our experiences about different devices. So, there is a big chance, that someone has had a problem like me, this is why I asked? Why are you so aggressive towards me?
In addition, I am not from USA/UK and I'm not native English speaker, but this "GD" thing I hear everywhere, so I didn't know it is that "big deal", specially, when I do not offend anyone.
Anyway, if you don't have any suggestions, you should just leave and put your hating anywhere else.
toka1232010 said:
As I understand, the part of the main aims of this website is to share our experiences about different devices. So, there is a big chance, that someone has had a problem like me, this is why I asked? Why are you so aggressive towards me?
In addition, I am not from USA/UK and I'm not native English speaker, but this "GD" thing I hear everywhere, so I didn't know it is that "big deal", specially, when I do not offend anyone.
Anyway, if you don't have any suggestions, you should just leave and put your hating anywhere else.
Click to expand...
Click to collapse
Ok first you may want to rethink how you come off to a moderator of this forum. I was not aggressive in anyway. If I see anyone use that term they are told the same thing.
Now someone may have had the same issue but what worked for them may not work for you. That is why you were told to try out other kernels.
This is a developers forum not a support site. Most things here will always have a bug or two as we enjoy trying things out and breaking things to see if we can fix it.
zelendel said:
Ok first you may want to rethink how you come off to a moderator of this forum. I was not aggressive in anyway. If I see anyone use that term they are told the same thing.
Now someone may have had the same issue but what worked for them may not work for you. That is why you were told to try out other kernels.
This is a developers forum not a support site. Most things here will always have a bug or two as we enjoy trying things out and breaking things to see if we can fix it.
Click to expand...
Click to collapse
To be honest, I really thought twice before posting the last comment, but still, I don't understand what you're saying at all. I said i'm trying lots of kernels to find the perfect one for me, but what is wrong with asking? What worked for them may actually work for me right?
I don't know about you moderators, but we, mortal users, sometimes support each other, so yes, this forum is somehow support site too.
Have a nice day.
toka1232010 said:
As I understand, the part of the main aims of this website is to share our experiences about different devices
No its not this is XDA Developers forum read the rules .
Anyway, if you don't have any suggestions, you should just leave and put your hating anywhere else.
You once more mistake the rules English speaker or not .
You where asked not to use such language all you had to do is not use such language and not reply as above .
What kernel best kernel what rom best rom posts are not allowed on XDA their is no best .
XDA does not spoonfeed .
http://forum.xda-developers.com/showthread.php?p=2031989#post2031989
Click to expand...
Click to collapse

LG G2 section is Unusable!!!

Please admins do some cleaning here. A lot of tutorials is very bad ripoff of another tutorials.
I my case I can not find one logically structured tread with general info about G2 flashing, SW versions and so on.
A lot of people try to make a money, by giving wrong information an later ask money for help to unbrick others phones. This is just terrible!!!
I AM ANGRY DUE TO BAD TUTORIAL I BRICKED MY PHONE REAL BAD.
Please ,clean or make new rules for comment rights, to help other not brick their phones!!!!
Hi
I think problem is not tutorials, but people who used first random tut.
Im sorry you bricked your device, but root G2 is really easy and install twrp.
For root u can use DP Tools from android g2 section, and twrp u can get with autorec from playstore.
That's all, if u wanna use customized roms, u will need install Jelly Bean bootloader, it support kitkat/lollipop/aosp roms. LG G2 is unbrickable by software, every state can be repaired. So, search tutorial for you to unbrick device and use my steps to have full unlocked device and feel free to mods and roms
I just unbricked my G2 after 6 weeks so ask if you need anything to help you.
Ganjax said:
Hi
I think problem is not tutorials, but people who used first random tut.
Im sorry you bricked your device, but root G2 is really easy and install twrp.
For root u can use DP Tools from android g2 section, and twrp u can get with autorec from playstore.
That's all, if u wanna use customized roms, u will need install Jelly Bean bootloader, it support kitkat/lollipop/aosp roms. LG G2 is unbrickable by software, every state can be repaired. So, search tutorial for you to unbrick device and use my steps to have full unlocked device and feel free to mods and roms
Click to expand...
Click to collapse
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
It is quite often that I found solution tread, first tree pages of comments are "nice work" , "good job" and so on , after fifth page real users actually give negative feedback. Now I am reading tread with 77 pages. I am in the middle and I still do not understand is it safe to use tutorial. And there are a lot of treads like this. XDA should give some rating possibility, to delete treads with wrong or not working properly solutions.
I am very disappointed in XDA.
MixXx2005 said:
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
It is quite often that I found solution tread, first tree pages of comments are "nice work" , "good job" and so on , after fifth page real users actually give negative feedback. Now I am reading tread with 77 pages. I am in the middle and I still do not understand is it safe to use tutorial. And there are a lot of treads like this. XDA should give some rating possibility, to delete treads with wrong or not working properly solutions.
I am very disappointed in XDA.
Click to expand...
Click to collapse
So, you mean u dont understand anything. I bricked my device few times, and i had no problem to recover this without any pay to anyone i know how to install cwm, rom, bootloader, how.. If you said we need pay for everything? Open your mind, if u are too lazy to read easy tutorials
Ganjax said:
So, you mean u dont understand anything. I bricked my device few times, and i had no problem to recover this without any pay to anyone i know how to install cwm, rom, bootloader, how.. If you said we need pay for everything? Open your mind, if u are too lazy to read easy tutorials
Click to expand...
Click to collapse
I can provide you with tons of treads in G2 sections, that is outdated or do not work from the begging.
I am reading these in terrible english written treads for straight two days and still nothing that wort been read!
As a matter of fact I am not a noob or total beginner ether....
You show u are, if no one before cried about G2 section everyone can mods, but not u, why? We should ask just u, this is not freakin magic
MixXx2005 said:
I can provide you with tons of treads in G2 sections, that is outdated or do not work from the begging.
I am reading these in terrible english written treads for straight two days and still nothing that wort been read!
As a matter of fact I am not a noob or total beginner ether....
Click to expand...
Click to collapse
So what doesn't work? Most of the things just do work normally but you need ofcourse to have the right bootloader version/modem just like on other devices. English isn't the main language for everybody so their English isn't perfect and so is mine but your's isn't 100% correct either. But they do contribute to the community and that breaks the barrier of languages.
MixXx2005 said:
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
It is quite often that I found solution tread, first tree pages of comments are "nice work" , "good job" and so on , after fifth page real users actually give negative feedback. Now I am reading tread with 77 pages. I am in the middle and I still do not understand is it safe to use tutorial. And there are a lot of treads like this. XDA should give some rating possibility, to delete treads with wrong or not working properly solutions.
I am very disappointed in XDA.
Click to expand...
Click to collapse
MixXx2005 I don't know which threads you are in but I never had anybody ask me for money or steal credit card date? There might be people asking for money or idk exactly what all but that might be going on in the background especially. As some people brick their phone others want to unbrick it and ask money for shipping/not trying to destroy it. If you want to do it free then you have to do it yourself probably. The G2 community does give solutions but there were already so many Q&A threads or people who all ask the same question/don't read properly the threads that some people just don't react anymore.
I had read many unbricking/root tutorials when I just came to this community several months ago already and everything worked fine. Also the hardbrick fix method worked fine for me.
Btw if somebody steals your credit card date then why did you gave them it all? If you have those kinds of problems or want to report something about outdated content then just react on the thread, Contact the OP, and or in cases of scams and those stuff contact a moderator. Moderator and members don't always have time to check or everything is alright so people need to report the problems.
So about "I AM ANGRY DUE TO BAD TUTORIAL I BRICKED MY PHONE REAL BAD. "
You really have to read carefully for which G2 variant is was meant, it doesn't matter if you are experienced or not experienced people also make mistakes just like that I hardbricked my G2 after I left myself on an unrooted rom with no download mode and recovery.
If you can say the problem you have like what kind of bricks, more details then I could might help you for free. The thing it might only costs is time but that's worth it if you fix your brick into an working G2.
I will try to reply asap but school and some other stuff in life might make me forget this so if you have a question please quote or mention my name as I would only then receive a notification about it.
EDIT: I read your thread now about your qh_usb brick and I read the tutorial. The tutorial isn't misleading or whatsoever there could have been an issue due to drivers/binaries and or communication between your device and fastboot itself. The tutorial was also meant for if you had the same message on your screen.
Btw in which mode are you? QHUSB_BULK 9006 or 9008? About the exclamation marks do you have the proper drivers for it? You might need to install the drivers manually with device manager. If you can mention which mode then I could perhaps help. Maybe not immediately but I could probably help you to unbrick your phone .
wulsic said:
So what doesn't work? Most of the things just do work normally but you need ofcourse to have the right bootloader version/modem just like on other devices. English isn't the main language for everybody so their English isn't perfect and so is mine but your's isn't 100% correct either. But they do contribute to the community and that breaks the barrier of languages.
MixXx2005 I don't know which threads you are in but I never had anybody ask me for money or steal credit card date? There might be people asking for money or idk exactly what all but that might be going on in the background especially. As some people brick their phone others want to unbrick it and ask money for shipping/not trying to destroy it. If you want to do it free then you have to do it yourself probably. The G2 community does give solutions but there were already so many Q&A threads or people who all ask the same question/don't read properly the threads that some people just don't react anymore.
I had read many unbricking/root tutorials when I just came to this community several months ago already and everything worked fine. Also the hardbrick fix method worked fine for me.
Btw if somebody steals your credit card date then why did you gave them it all? If you have those kinds of problems or want to report something about outdated content then just react on the thread, Contact the OP, and or in cases of scams and those stuff contact a moderator. Moderator and members don't always have time to check or everything is alright so people need to report the problems.
So about "I AM ANGRY DUE TO BAD TUTORIAL I BRICKED MY PHONE REAL BAD. "
You really have to read carefully for which G2 variant is was meant, it doesn't matter if you are experienced or not experienced people also make mistakes just like that I hardbricked my G2 after I left myself on an unrooted rom with no download mode and recovery.
If you can say the problem you have like what kind of bricks, more details then I could might help you for free. The thing it might only costs is time but that's worth it if you fix your brick into an working G2.
I will try to reply asap but school and some other stuff in life might make me forget this so if you have a question please quote or mention my name as I would only then receive a notification about it.
EDIT: I read your thread now about your qh_usb brick and I read the tutorial. The tutorial isn't misleading or whatsoever there could have been an issue due to drivers/binaries and or communication between your device and fastboot itself. The tutorial was also meant for if you had the same message on your screen.
Btw in which mode are you? QHUSB_BULK 9006 or 9008?
Click to expand...
Click to collapse
Thanks for your replay.
After all day of reading tons of useless information finally unbrick my phone. Now it is fully functional again.
I will explain why I am mad.
1st after official update my phone start to act weird (now i know what caused it, and it do not matter), then after I try to flash stock FW I stuck at LG logo. I found two different tutorials and both of them showed contradictory steps, I decided to follow one of them and like I said get error and booting till LG logo.
Next due to bad tutorial I erase all partitions with fastboot. But in the tut. was not said anything about proper way to do it. So after that tut. I get real brick. Still everyone can brick their phone following it.
http://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033 (3. step - how can I know that I should modify provided code with my .img file path? Where is something said about it?)
Then I read FAMOUS "LG G2 is UNBRICKABLE NOW! [FIX REAL HARD BRICK]" . After that I tried to short out test pins. Again I found contradictory informations about test point locations.
To get any life in my dead phone ,I try them both, and luckily I did not damaged eMMC.
There are a lot of wrong information how you should act in different situations in these topics, and these things can permanently destroy your hardware and there are no highlights or any warning about it.
So after qh_usb brick win 7 was unable to detect drivers, but somehow randomly after several hours of search, I found correct Qualqomm drivers, after that the device manager showed connection with 9008 mode brick. Then after I read whole
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830/page42
5th page before end ,give me right tool to fix my phone. tons of contradictory info there - truly TONS.
I can give you treads , where people do not give right topics, but instead give their FB and later ask for money.
Also I can give you proofs about those who said that they will help you for free in TeamViewer and quietly install keyloggers.
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830/ (read this tread , somewhere in middle of it, there are a lot of proofs)
It took me around 15 h with intense bulls*it filtering to get my phone in order.
And the most annoying thing , is that this all, what I describe previously , could be done in 15 min, if there would be ONE normal tread.
If all other/bad/misleading treads would be deleted, then my troubles would not been started in 1st place.
But like I said before this G2 community is terrible from beginners point of view.
Ok here is one thing
1. before doing anything search ( I agree that you will find a lot of outdated threads -- not useless but mostly outdated)
2. There is a help section with people who will understand where the error is and try to help you out
3. Most of the people here ask a question, solve the issue and just write: "fixed", without writing how and possibly contributing
Honestly, If I were a mod I would just delete their useless threads, always thinking of themselves
There isn't any magic tool that will fit everyones needs, people who are new just click random
I hope you fixed the device
bender_007 said:
Ok here is one thing
1. before doing anything search ( I agree that you will find a lot of outdated threads -- not useless but mostly outdated)
2. There is a help section with people who will understand where the error is and try to help you out
3. Most of the people here ask a question, solve the issue and just write: "fixed", without writing how and possibly contributing
Honestly, If I were a mod I would just delete their useless threads, always thinking of themselves
There isn't any magic tool that will fit everyones needs, people who are new just click random
I hope you fixed the device
Click to expand...
Click to collapse
Thanks, everything is good now. But I disagree - there are a lot of wrong and often contradicting treads and a lot of people that make their salary due to this.
I think admins should ban a lot of users here and also implement some kind of tread and user ranking. Because there are also people that do not know anything( I my point of view, they are just helpful fools ,that do not understand what they can cause with their misleading information) ,but they tried to help by just posting random s*it they were hear somewhere else. And I as desperate beginner can make much worse brick by following the advice.
MixXx2005 said:
I can give you treads , where people do not give right topics, but instead give their FB and later ask for money.
Also I can give you proofs about those who said that they will help you for free in TeamViewer and quietly install keyloggers.
http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830/ (read this tread , somewhere in middle of it, there are a lot of proofs)
.
Click to expand...
Click to collapse
What proofs of keyloggers? I read it but didnt found anything..
Vihru said:
What proofs of keyloggers? I read it but didnt found anything..
Click to expand...
Click to collapse
Post #63 and below it.
http://forum.xda-developers.com/showpost.php?p=57454159&postcount=63
I don't believe this happened. There would be more people involved in such opinions then.
Tbh the thread name of yours is kind of embarasing for people who create free stuff for everyone.
If you have any issues with any user on xda there are mods and admins and you can report them.
MixXx2005 said:
Nope. G2 community is so bad. No one give solutions, only ask for money , even steel credit card date. I love the phone, but the community is just terrible.
Click to expand...
Click to collapse
Odd.
Because I always found a solution for every problem I had, got an answer for every question. Even the most ridiculous ones.
So I disagree that the community is bad, quite the contrary. Every bit of info is here. You just have to read and understand what you've read.
And people here are nothing but helpful (most of them, at least).
P.S. as long as your G2 boots up, it is not bricked and it can be salvaged.

Categories

Resources