Is it possible to install it without a card?
I´ve been trying everything.... but I can´t install it no matter what
What's the problemo?
Sent from my GT-I9000 using XDA App
As long as I can remember, you can't install it if you don't have an sd card (toshiba recovery is quite limited).
(I now use Clockworth, so I can't verify)
Inactive memory?
I installed the foliomod 1.4 and if I check it in the information I Got this.
http://logout.hu/dl/upc/2011-04/7399_2.jpg
There is a 155 MB inactive memory..Why?It contains the system files?I could not to install it to the 16 GB internal ssd?
Related
Hi,
Recently rooted my hero after losing impatience waiting 6 months for htc to get their finger out.
Used cronosdroid and now using villianrom 10.2 final but will no doubt try out modaco in some point too.
Anyway, I would like to know if it is possible to save and run my apps from the sdcard?
I hear this will be possible using 2.2 but have heard that something called a2sd allows this functionality also?
If so, could anyone point me in the right direction to get a total noobs guide to installing and using a2sd and how I would then go about deleting the apps from the phone's internal memory and just running them from the sd card?
Many thanks for any help and advice you are able to share,
Cheers.
So you have already installed Amon Ra 1.6.2 yeah?
Check out BTDAG's guide in my signature,... The apps2sd bit is about half way down the 1st post, in grey writing.
I downloaded something called quick system info from the market and it says that a2sd is there giving me 457mb total and 423mb free.
I went through that long drawn out procedure (as a result of being on t-mobile uk) and used amon ra and created a gold card etc.
My Problem is, I dont know how to "use" this a2sd functionality.
I want to basically download from the market and save to the sdcard and run the apps from the sdcard and am unsure how to do this?
It doesn't do it automatically as I get to the usual memory low message after downloading 50-100 apps, so presumably the apps are still saving to the phones internal memory.
Basically, I want to know how to save and run from the sdcard and delete from the phones memory if thats possible as I think is the whole point of a2sd?
dazzer1975 said:
I downloaded something called quick system info from the market and it says that a2sd is there giving me 457mb total and 423mb free.
I went through that long drawn out procedure (as a result of being on t-mobile uk) and used amon ra and created a gold card etc.
My Problem is, I dont know how to "use" this a2sd functionality.
I want to basically download from the market and save to the sdcard and run the apps from the sdcard and am unsure how to do this?
It doesn't do it automatically as I get to the usual memory low message after downloading 50-100 apps, so presumably the apps are still saving to the phones internal memory.
Basically, I want to know how to save and run from the sdcard and delete from the phones memory if thats possible as I think is the whole point of a2sd?
Click to expand...
Click to collapse
If you followed my guide correctly it will be working. You can check that with the other script in my guide. If you're still running out of memory it is because the dalvik is still stored on the SD card.
Ok,.. So you need to be using a custom ROM with apps2sd enabled. Then once that is on your phone, you just need to partition the SD (like it says in the guide)... thats it!
btdag said:
If you followed my guide correctly it will be working. You can check that with the other script in my guide. If you're still running out of memory it is because the dalvik is still stored on the SD card.
Click to expand...
Click to collapse
How do I move the dalvik to the phones internal memory?
I presume I followed the guide correctly as i've come from t-mobile touch g2 on 1.5 and am now using 2.1 villain rom and cronos rom before that but am still running out of memory, even with partitioning my sd card.
presumably then its the dalvik located on the sd card?
dazzer1975 said:
How do I move the dalvik to the phones internal memory?
I presume I followed the guide correctly as i've come from t-mobile touch g2 on 1.5 and am now using 2.1 villain rom and cronos rom before that but am still running out of memory, even with partitioning my sd card.
presumably then its the dalvik located on the sd card?
Click to expand...
Click to collapse
yeah thats because you didn't flash either Dalvik Cache to the SD card or Dalvik-Cache to /cache thats why your phone still taking internal memory .. try this for solution :- http://www.villainrom.co.uk/wiki/index.php?title=Apps2SD
Hope it Helps
wicked cheers for that mate!!!!
I has some problem after I install some guy's Android 2.2.1 rom.
A first, that was perfect when i finish install the rom.
And then, I put back all app to internal rom and EXT4.
After that, it still has 150MB in internal rom and 800MB in EXT4.
But after that day, I try to connect with USB and disconnect.
My phone reboot, and most app was gone.(maybe install in EXT4.)
And I found a file ".noa2sd" in /data.
I tried to del it and reboot, all app were came back.
But the internal rom changed to 50mB.
Can someone tell me why?
Maybe it was moved back to the SD card? Or it's possible that ROM failed to automount the ext partition. Not sure, since I don't use Apps2SD.
Hello!
I've just rooted Viewpad 7 and installed EUViewpad7 v1.7b firmware.
In Quick System Info app it says I have only 4 kb free "system storage" left.
I'd like to try to increase internal storage size, perhaps at expense of some internal storage or somesuch (since apps run from SD thanks to apps2sd)
And yes, the ROM already has apps2sd, so I don't think I can move any more stuff to SD without breaking everything...
Is increasing "system storage" possible ?
1. Link2sd way
- Rooted
- Partition EXT3 or 4 in your micro-sd, size whatever u want (1024 mb recommend).
- Open Link2sd's app select ext3 or 4.
- Reboot
2. a2sd way
- Rooted
- Install CMW.
- Partition EXT3 or 4 in your micro-sd, size whatever u want (1024 mb recommend).
- Install a2sd from recovery mode.
- Install a2sd gui from Google play.
- move data from app or in terminal [type su>enter>type a2sd datasd>enter>auto reboot]
3. Google move to sd-card, apps2sd or app way
- Install app that the name say move to sd or something.
- Not help.
And like other developer alway said, Do it with your own risk.
Sorry for my weak english.
I think a2sd is already installed and all the apps that can be moved to SD are on SD already (a2sd comes with EUViewpad7 v1.7b by default, and I did create all the partitions and stuff on SD. Also, terminal emulator -> a2sd check says that I have apps and dalvik cache running from SD)
So. moving apps 2 sd is unlikely to yield much relief since they all are already there
Any other ideas on getting more "system storage" ?
If your a2sd run perfect, your rom space will not decreate even if u install a lot of app.
Sent from my ViewPad7 using xda premium
Yeah.
Though I would still rather have it larger, you know, just in case (also curious about it on general principle of finding out new stuff)
indyend said:
If your a2sd run perfect, your rom space will not decreate even if u install a lot of app.
Sent from my ViewPad7 using xda premium
Click to expand...
Click to collapse
+++1 on that, many others have successfully used A2SD on the EU v1.7b ITE ROM like myself, it's been documented in extensive details in the custom Rom's thread, please re-read and follow the steps outlined, and, backup anything & everything important on the mSD card first.
I'm guessing that the mSD card wasn't fully reformatted and setup properly.
Quick key steps: make sure you do a full dalvik, cache & system wipe first (after backing up via CWM 2.x - recommended verison over 4.x or newer 5.x) and format ext3/4 with 1MB space, move/copy ZIP file back to ROM and select it to flash/install, continue with full setup, power down & restart.
You will need to re-install Titanium Backup & A2SDGUI from Market (it's now Google Play, once your account is setup/restored) and check your memory/storage with A2SDGUI, it should show plenty of available/free space for internal, system/rom and SD/ext card usage.
If not, re-check your steps and repeat it for proper installation. If it's working, A2SD will dynamically move & free up plenty of space for Apps, I have over 50 (market) apps of them in addition to the default/custom Rom's Apps, and 2 verisons (soon to be 3) of Angry Birds running on it.
A 8GB mSD is the minimum that I would use, a 16GB mSD is better with all the CWM files that you will store on it, plus MP3 and videos, etc.
FYI - mine device's readings are:
Internal memory free (total) 93MB (171MB)
SD-Ext free (total) 555MB (914MB)
/cache/free (total) 86MB (88MB)
Ram free (total) 226MB (415MB)
A corrupt installation will not display all of the above. I have yet to come across after trying other App2SD apps out in the "Market" that work and can free up so much "extra" for the Vpad7 ... YMMV
Good luck & if you are not sure, please post your results/space as shown under A2SD as written by DT.
Link of my space and u will see how much free of my viewpad7. And the most important is no app on m-sd. It's all in ext3.
http://db.tt/YTSbK5Ss
Sent from my ViewPad7 using xda premium
Okay, guess I'll just have to stop worrying lol
HI folks,
Total newbie here looking for advice. With the excellent instructions on the site, I was able to quickly and easily burn CM7 to a class 4 SD card and boot my 16 gb nook table w/ no problem. I love CM7 and it blows away the Nook OS and the absurd limitations B&N has placed on the tablet.
Here's the question: I now want to open up additional storage and want to know if it is worth rooting the Nook internally?
I also wonder if it would run a little faster vs. running from the SD card?
I see no reason to ever go back to the B&N environment. On other hand, don't want to accidentally brick it in the process when it is running fine from the card.
If I choose to go with internal root, I am also bit confused on the best (most sound) way to go ahead and load CM7 internally, given that it is running now from the card. Do I just move it over or do I have to do something with CWM?
Thanks!
David
Easiest way to get a rom on the internal:
1. Make a bootable clockworkmod sd card (similar to your CM7 card, but this card will allow you to boot into a custom recovery).
2. Transfer desired rom (zip file) to local memory of the nook.
3. Boot into clockworkmod recovery via the card.
4. Make a backup of the current rom.
5. Install zip from sd -> choose the zip file you placed on the local memory.
6. Wipe data/cache.
7. Reboot into your new internal rom. If you would like, you can use indirect's app to flash clockworkmod to the internal memory and then format the bootable sdcard so you can use it as media storage.
If you ever need to return to stock, you can simply restore your backup via recovery.
Thank you very much!
That helps. I guess I am still trying to decide if it is worth doing that.
Will I have memory free on the device that I do not now and will it run any more efficiently or faster (vs. running off the SD card)?
Thanks again.
I think you'll have full access but it won't be mounted when you plug it into a PC.
If you want it to be mounted, you'll need to repartition. There is a guide for that or you can go to B&N and have them do it. Though, the B&N repartition is only half and half; doing it on your own you can get a lot more.
This is only for CM7 based roms though. CM9 does not have the internal memory mounting yet (I'm sure eventually it will).
jericho ishipatb
Hmmm I need to search for a guide to mount the internal memory again.
I have done what the OP is thinking about doing on my Nook Tablet 16gb.
It works flawlessly but I don't see the internal memory when hooking the nook up to a PC. I just get an exclamation mark in my device manager. I can browse the internal memory through cm7, and it shows that I have nearly 12 gigs of free space on the device itself, but I cannot drop content from my pc on there.
/me searches how to mount internal memory
Try modifying your build.prop file as shown in this post
Unable to mount "/bootdata"
I got an error msg (Unable to mount "/bootdata") when performing 4. What did I do wrong? I use TWRP to backup the ROM on bootable SD Card.
Cubanluke88 said:
Easiest way to get a rom on the internal:
1. Make a bootable clockworkmod sd card (similar to your CM7 card, but this card will allow you to boot into a custom recovery).
2. Transfer desired rom (zip file) to local memory of the nook.
3. Boot into clockworkmod recovery via the card.
4. Make a backup of the current rom.
5. Install zip from sd -> choose the zip file you placed on the local memory.
6. Wipe data/cache.
7. Reboot into your new internal rom. If you would like, you can use indirect's app to flash clockworkmod to the internal memory and then format the bootable sdcard so you can use it as media storage.
If you ever need to return to stock, you can simply restore your backup via recovery.
Click to expand...
Click to collapse
anitafagina said:
I got an error msg (Unable to mount "/bootdata") when performing 4. What did I do wrong? I use TWRP to backup the ROM on bootable SD Card.
Click to expand...
Click to collapse
Which version of TWRP did you use?
digixmax said:
Which version of TWRP did you use?
Click to expand...
Click to collapse
The screen says 2.3.3.0
It came with the SD Card image: hxxp://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/#comment-2948
Thanks.
anitafagina said:
I got an error msg (Unable to mount "/bootdata") when performing 4. What did I do wrong? I use TWRP to backup the ROM on bootable SD Card.
Click to expand...
Click to collapse
If you are trying to backup stock ROM and then install CM internally on emmc, I'd suggest taking a look at http://forum.xda-developers.com/showpost.php?p=35669871 for info/pointers.
digixmax said:
If you are trying to backup stock ROM and then install CM internally on emmc, I'd suggest taking a look at http://forum.xda-developers.com/showpost.php?p=35669871 for info/pointers.
Click to expand...
Click to collapse
Thanks a million! The instructions are simple to follow and it just works! :victory:
Has anyone else had problems installing larger apps? I tried installing "Broken Sword" from one of the Humble Bundles a while ago. It seems to just stop installing and says the application can not be installed. There is no detailed error at all.
I can install other (smaller) applications from the bundle. Maybe the partitioning is decided in a wrong way, I have the following:
Internal memory:
11,87GB - 11,52 free
Internal memory:
1,00 GB - 759 MB free
SD-Card:
7,41 GB - 5,69 GB free
The apk I want to install is on the SD-Card already and is 540MB which shouldn't be too much for any of the memorys, except maybe the second internal memory? Why is there this second internal memory?
SOLUTION 1: If you don't use an external SDcard changing the mount point of /sdcard1 and /sdcard0 should help, there is a package for that there: http://forum.xda-developers.com/showpost.php?p=32093304&postcount=179
OR you might want to consider to just make /sdcard1 a symlink to /sdcard0 with at least the drawback of not being able to use external sdcards anymore, as long as this is a symlink and not a directory - and maybe other sideeffects!
SOLUTION 2: Specifically for this app, the app itself has some glitches, see there the last post on how to install this specific app: http://forum.revolution.co.uk/topic/636/?page=4
Thanks for help and clarifying, maybe a repartition will be needed? (If it is needed, any link to a useful guide for someone that can manage UNIX / GNU/Linux systems but doesn't know too much Android specific stuff would be the most helpful)
Or is the problem maybe another one?
The partitioning isn't the issue, what else could be the problem?
----
My System Details:
Nook Tablet bought from ebay with CM10 (I think) installed already in internal memory, but no working internal recovery - installed CWM 6.0.3.7 and CM10.1.2 internally using a bootable CM10.1.x sdcard. Maybe the partitioning also isn't the default but was done by the pre-owner.
Okay, seems like size wasn't the issue
I repartitioned according to the following thread:
http://forum.xda-developers.com/showthread.php?t=1531120
And now made internal memory 1 to be 3,3 GB and Internal memory 2 to be 9,99 GB
Any of these still has enough space left, so there must be another problem ... any help?
Then some other issues that seem to persist: adb is shown "offline", I am running Linux and don't need to mess with Windows driver issues, all relevant solutions that I found for this didn't work, I also tried with data/factory reset and a new cm10.1.2 and nothing else on the system, still it is always "offline" ( adb in cwm works ).
Is there overall something else to care about with the Nook Tablet that I might have overlooked? It is also not too nice that the usual "central resource" for installing CM ( http://wiki.cyanogenmod.org/w/Install_CM_for_acclaim ) does only show a non-working general guide... but I don't want to complain
I am also having the same issue. I have a nook tablet 16gb running CM 10.1 with 3.3 GB Internal Storage for all of the apps and 9.99 GB Internal Storage for everything else.
I have 2.8 GB free on the apps storage partition and 9 GB free on the other partition. when I go into Settings --> Apps and look at the SD Card tab, I see that 326 MB are listed as available for SD Card storage with 0 MB. I am not using an external SD Card.
I am unable to "move to SD Card" for any apps even though the option is highlighted. All apps have installed fine, but when I ran Minion Rush for the first time it stopped and said that I need 70 MB of available SD Card storage space to download additional data for the game. I have plenty of space available on both partitions, but for some reason this app doesn't recognize either of these partitions as an internal SD Card.
Is there a way to configure this device to use either of these partitions as internal an SD Card?
bluesock said:
Okay, seems like size wasn't the issue
I repartitioned according to the following thread:
http://forum.xda-developers.com/showthread.php?t=1531120
And now made internal memory 1 to be 3,3 GB and Internal memory 2 to be 9,99 GB
Any of these still has enough space left, so there must be another problem ... any help?
Then some other issues that seem to persist: adb is shown "offline", I am running Linux and don't need to mess with Windows driver issues, all relevant solutions that I found for this didn't work, I also tried with data/factory reset and a new cm10.1.2 and nothing else on the system, still it is always "offline" ( adb in cwm works ).
Is there overall something else to care about with the Nook Tablet that I might have overlooked? It is also not too nice that the usual "central resource" for installing CM ( http://wiki.cyanogenmod.org/w/Install_CM_for_acclaim ) does only show a non-working general guide... but I don't want to complain
Click to expand...
Click to collapse
I figured it out bluesock. There is a former post that provides a solution. There is a ROM you will need to install that will fix this issue.
http://forum.xda-developers.com/showpost.php?p=32093304&postcount=179
I copied the ROM to an SD Card then booted up into CWM and installed this ROM. After the reboot the second partition is renamed to SD Card and shows 10 GB of total space. Under file manager this partition is listed as sdcard 0 instead of sdcard 1. After that I was able to install apps of any size successfully.
Ok this "ROM" basically only modifies /system/etc/vold.fstab and switches sdcard0 around with sdcard1. This probably helps when not having a sdcard like in your case.
My problem wasn't this one, I have an external sdcard - so both sdcard0 and sdcard1 have enough space left!
But there was a problem with this specific app, check the last post on how to install: http://forum.revolution.co.uk/topic/636/?page=4 - sorry for not reporting back earlier, I will edit the first post in some minutes with our two "solutions" / explanations.
But first:
For you the better solution might be to do what digixmax said in that thread: http://forum.xda-developers.com/showthread.php?t=2430335
I will reply there in some seconds with more details about what he said!