Hey all,
I am able to flash new roms, and after it does its looping i can get everything up and running, service, 3g, etc. Once i do a reboot and it loads up the rom again, i get no service, and a FC error saying "Process system is not responding"
Does anyone know the cause or how to fix this?
More info: i started on bb55 CM6.1.3 v4.5.7, upgraded to v06 and got this error
THEN i had to repair via sony pc companion, back to Rogers rom. then installed tripnmiui final, everything worked. once i rebooted i got no signal and fc msg.
Only thing i can possibly think of is your making some kind of error in the installation process of your ROMs. Repair your phone once again and follow the steps carefully on flashing new ROMs. Sounds like it could be a possible basebrand problem as well because Tripnmiui runs on basebrand .49 and .52. Should have a clean installation if you follow the steps carefully =)
thanks for the reply!
for the installation of tripnmiui i installed the rom and then changed the bb to 52. The rom was up and running, and i was able to get all services, but once i rebooted, nada...
Related
Hi
sorry if this thread is doubled.
I have upgraded my Olipro 2.3 to 2.6. The upgrade proces ended with error, but the newer version was flashed into phone and working.
Now, when i upgrade any rom, at 100% the phone dont reboots itself, i need reboot it manually, at computer is the error state. But all the roms work normally, after reboot. I am unable to downgrade to 2.3, re-flashing to 2.6 is with the same end - error.
can anyone help me how to repair this?
thx
aaaaaaarghh
sorry for this idiot´s thread
fixed
i apologize
admin, can you delete this?
HELP!!!
I have a UK xperia x10 on Orange network, yesterday i rooted my phone and installed freex10 2.2 rom. Everything works perfectly except my network/operator.
i tried to manually select a network but it just says error..
can anyone help me plz?
Do you have the right baseband? And what is it?
what were your steps for flashing freex10 2.2?
it says my baseband version is unknown
i followed zdzihu's thread from start to finish http://forum.xda-developers.com/showthread.php?t=908791
by putting freex10 and gappsx10 onto my sd card, and then installing them using xrecovery. i also had to use adb killall service manager to stop the random reboots.
thanks in advance
i applyed the WB ROM to this phone, and after the ftf bundle, and since that moment its been rebooting gain and again, ive tried with official rom, doomlord image, rendeiro´s image and nothing no ROM seems to work with this phone, is there a way to downgrade to 2.1? or apply a tweak, seems like the phone doesnt like BB 71,
upper20c said:
i applyed the WB ROM to this phone, and after the ftf bundle, and since that moment its been rebooting gain and again, ive tried with official rom, doomlord image, rendeiro´s image and nothing no ROM seems to work with this phone, is there a way to downgrade to 2.1? or apply a tweak, seems like the phone doesnt like BB 71,
Click to expand...
Click to collapse
hmm u shudnt really have ny problems it is recommended to be rooted and have xrecovery prior to going onto 2.3.3, unless ur already on 2.3.3 where all u gta do is flash the zip provided using xrecovery
i flashed the phone following the instructions, this is the second xperia that i flash to 2.3.3 first was mine (working wb 3.8.0 features) and the one that keeps rebooting is my sister´s phone.
its weird, the phone is working but its rebooting when i try to make a call, i can receive calls, not to initiate one, wifi is working ok, but if try to configure the mobile data connection it reboots as soon as it starts to communicate, and keeps rebooting, some help please
seems like the baseband is giving me problems, the phone was working the whole weekend on 2G, without mobile data connection, now i entered the APN´s, and switched to 3G and it reboot over and over, doesnt letme change the connection mode to 2G again
I decided to update my rooted x10a from generic 2.1 to Wolfbreak 2.3.3. I installed xRecovery and Busy box couple weeks ago. I made a backup of my 2.1 ROM with xRecovery. Yesterday, I put 2.3.3 on and flashed. Everything was fine except I had no contacts and whatnot on phone as usually happens. Had trouble getting into Market and even tried creating new account, no luck. I rebooted then and went into xRecovery thinking I could restore certain data. I chose the wrong Restore and it started and said Checking MD5 sum, then it was putting my previous backup on phone. At this point was like "oh no" and driving car to work. Now its at the SonyEricsson screen and keeps rebooting. I've gone back into xRecovery and tried Factory Reset, Wipe Cache part. and Wipe Dalvik. Then to Install custom zip, I choose from SD card and WolfGB2.3TWv3.5.
It says Installing: Finding update package... E:Cant mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (Device or resource busy)
E:Cant mount SDCARD:WolfGB2.3TWv3.5.zip Installation aborted.
Tried hooking up to computer today and even when trying to get into Flash mode it goes in but after 2-3 minutes, it reboots.
Any help would be greatly appreciated as at this moment I have had to go back to using my SE w810i (good phone but no android)
Can't you use the flashtool and flash SE 2.1 firmware? Or SEUS? You said after 2-3 minutes the phone (seemingly automatically) reboots, but does it reboot even when you are in the middle of flashing a ROM?
You should be able to start from the beginning as long as you can get the phone into flashing mode.
After playing some games on computer, went back and reflashed it to 2.1. Now hopefully will be able to get back to 2.3.3, this time wont be a bonehead. Thanks for help dude!
updated to wolfbreaks hotfix v3.8.2 question
I have already installed the update to wb 3.8.2 everything works great, but i wanted to check version on my phone and went into setting, about phone and my version of wolfbreaks build number shows 3.7.0. I had installed the original rom then 3.8, and now 3.8.2. just wondering if anyone else has this issue.
thanks.
well wolf clearly stated that it is a known bug
http://forum.xda-developers.com/showpost.php?p=16547986&postcount=5761
Build.prop still says 3.7 and not 3.8
Click to expand...
Click to collapse
GB v 3.9.0 stock browser lagging
Okay after having v 3.9.0 the whole day and testing everything out I found out my stock internet browser is really lagging pages dont scroll as easily as previous updates. Also my bluetooth doesnt turn on it waits but doesnt turn on.
Any suggestions?
Hi there, ive looked all over online and on here for about a week solid now for a solution for this and cannot find one anywhere! My situation is.. im running gingerbread 2.3.3 on my S2 that I got in 2011. As soon as I got it I flashed the Lite'ning ROM to it. It worked fine up until christmas just gone and just all of a sudden started saying this error message when I tried to open anything, such as messages, contacts, google, camera etc..
"sorry the application ..... (process com.android.vending) has stopped unexpectedly. please try again"
So I have just been trying to get the phone back to orignal factory settings by putting a factory ROM on, or install a new custom ROM in the hope that this will solve the problem and get the phone working normally again. I used Odin and installed a custom ROM successfully (so I thought) but when I rebooted the phone I was still stuck on Lite'ning ROM and everything was how it was before. The same happened when I installed a factory ROM. I also tried to install a custom ROM via the SD card, but this failed everytime.
One other thing.. when I restore to factory settings while on the CMW and then reboot the phone.. nothing has gone, its exactly the same, with all my contacts, pictures and apps. I never knew it would be so hard to restore my phone. Im hoping someone here can advise me on what to do... Ive a feeling it might be to do with the fact the phone is gingerbread 2.3.3 and all the custom ROMs now are made for ICS or Jelly Bean? If so how do I get my phone to work with these ROMs. Thanks for reading and I really hope someone can help!
alexandamusic said:
Hi there, ive looked all over online and on here for about a week solid now for a solution for this and cannot find one anywhere! My situation is.. im running gingerbread 2.3.3 on my S2 that I got in 2011. As soon as I got it I flashed the Lite'ning ROM to it. It worked fine up until christmas just gone and just all of a sudden started saying this error message when I tried to open anything, such as messages, contacts, google, camera etc..
"sorry the application ..... (process com.android.vending) has stopped unexpectedly. please try again"
So I have just been trying to get the phone back to orignal factory settings by putting a factory ROM on, or install a new custom ROM in the hope that this will solve the problem and get the phone working normally again. I used Odin and installed a custom ROM successfully (so I thought) but when I rebooted the phone I was still stuck on Lite'ning ROM and everything was how it was before. The same happened when I installed a factory ROM. I also tried to install a custom ROM via the SD card, but this failed everytime.
One other thing.. when I restore to factory settings while on the CMW and then reboot the phone.. nothing has gone, its exactly the same, with all my contacts, pictures and apps. I never knew it would be so hard to restore my phone. Im hoping someone here can advise me on what to do... Ive a feeling it might be to do with the fact the phone is gingerbread 2.3.3 and all the custom ROMs now are made for ICS or Jelly Bean? If so how do I get my phone to work with these ROMs. Thanks for reading and I really hope someone can help!
Click to expand...
Click to collapse
I think you should try a 3-files odin flash rom.
If you search in google for "Odin 3-files i9100" than you will find the rom