Hi
sorry if this thread is doubled.
I have upgraded my Olipro 2.3 to 2.6. The upgrade proces ended with error, but the newer version was flashed into phone and working.
Now, when i upgrade any rom, at 100% the phone dont reboots itself, i need reboot it manually, at computer is the error state. But all the roms work normally, after reboot. I am unable to downgrade to 2.3, re-flashing to 2.6 is with the same end - error.
can anyone help me how to repair this?
thx
aaaaaaarghh
sorry for this idiot´s thread
fixed
i apologize
admin, can you delete this?
Related
I am a newbie and for the fear of bricking my device did not flash my device. I only updated my radio version from 1.07 to 1.16, which worked without a glitch. The device worked fine after the upgrade. But just recently I had to hard reset my device and after the reset I am having problems with gprs. The links that were working fine before don't open anymore. If anyone could please help me with it, the upgrade files aren't available on the site anymore, but would it help if I roll back the radio to the older version and where can I get the file, or if I could get the 1.16 version itself and try flashing it again. Any help would be appreciated.
Hi Experts,
I got some problem to upgrade my Hermes to the most recent 1.51 radio module.
Previously, it's shipped with rom 1.2. I flashed hard-spl V7 later, and managed to upgrade the radio to 1.41 last week. Today, I tried to upgrade it to 1.51, however, one strange thing was the flash progress bar went very slow, fortunately, it completed at last. However, when the phone rebooted, I found the radio remains at 1.41~~~~~
What's the problem with that? Any more information needed?
Thanks in advance.
that proplem with me need help plz
Can anybody help us out?
Your input would be much appreciated.
Guys,
I guess the reason why no one has responded is because there are a number of options you can take to solve this problem. Most (I think) are in the wiki, hence no response.
Take some time out to do a search on Radio Upgrade problems and see what comes up.
WB
Dear WB,
Thanks for your reply. Actually, I have already read the Wiki pages. Maybe I missed some of them. However, I cannot find a solution to it.
Thanks,
Jiayi
@Jiayiw
i recommend you to read and read and read and then upgrade roms and radios that some other users used and had no problems with them , coz your device can be simply bricked like mine if you install a bad or corrupted rom into it .
good luck
WBR
It just occurred to me that, after I flashed the radio to the 1.41, it upgrades my HTC boot to 0182....
So, there is no way to flash the radio with the HTC boot version 0182?
Also, the Radio 1.41 rom is downloaded from the wiki......
Have you tried flashing another radio version like 1.47, to see if that works? You tried downloading 1.51 froma differennt source eg here>>> http://forum.xda-developers.com/showthread.php?t=323957?
WB
Thanks WB,
The problem is related to the HTC boot in my Hermes, it's 0182 already, I am not sure why it got upgraded after my flashing last time.
Anyway, I am seeking the method to flash the radio with HTC boot at 0182.
Dont know whats happened, I have been able to flash custom ROMS for about 3 weeks now, and no problems. Now today, everytime I flash a new fom onto my phone, I get setup errors, and FC all the time.
At first it was just with the new [ROM][16/04/2010][Vanilla 2.1][VERY Stable][Fast Fast Fast] VanillaEclair 0.2JIT but now it is happening with EVERY rom..
Please help....
Ian
Error says Process system is not responding, and The process.android.process.media has stopped unexpectedly. Please try again. I am getting this all the time... HELP !!!
If you come from any 1.5 ROM you'll always have the FC.
If you come from any 2.1 ROM you don't have FC
Wipe - flash any 2.1 ROM -install-reboot- Wipe - Install VanillaEclair 0.1b
It works !
will this explain why I am getting this error on every ROM i try and flash. They all come up with FC errors during the 1st boot up..... it is as if there is a deeper problem with the phone, not just the ROM...
I am really panicking about this, can someone pls help.......
Hello everyone, hopefully you can help me figure out what's wrong with my HD2.
.:BACKGROUND INFO:.
I bought a used TMoUS HD2 a couple months ago and it was working fine up until last month. At first, it would freeze and I would have to do a battery pull, but as time went on, it froze more and more often. One day, I think it froze around 20 times in a row. Eventually, I let the phone sit without the battery for a few minutes before I tried booting it again. When it did boot, I figured maybe there's something wrong with the software, so I did a hard reset. After the hard reset, the phone will boot into the desktop and then freeze (If I'm lucky) or sometimes it will just freeze on the T-Mobile "Stick Together" screen. I tried flashing a the stock ROM and it would always stop at 8%.
I've always used the stock ROM since I got the phone, not sure if the previous owner flashed it before, but it does have HSPL 2.08. The only thing I've done to the phone are the registry tweaks I got from these forums. Here's a list of applications I installed to my HD2:
Chainfire 3D Driver Update
Co0kie's Home Tab
appelflap HTCRamDisk
ATT WAP MEdiaNet and MMS Settings
Band Switch V2.8 Auto Disconnect Data
Battery Increment Display 1.66 ROMs
CleanRAM
ClearTemp v1.3.1
GoogleMaps
JayVee Disable Clock Flip
Long Press Send Key Alt Tab
RAMDisk Opera Cache
TCPMP v2 Video Audio Player
TX Opera Mobile 10 Flash Support
WM Long Life 0.66. 0302
Not sure if this is relevant or not, but the last thing I remember installing was Co0kie's Home Tab before the freezing started.
.:HD2 SPECS:.
OS Version: 5.2.21892 [21892.5.0.89]
Manila Version: 2.5.20121412.2
Rom Version: 2.13.531.1 [90963] WWE
Rom Date: 04.28.10
Radio Version: 2.10.50.26
Protocol Version: 15.39.50.07W
.:THINGS I'VE TRIED:.
Flashing a Custom ROM via USB will stop randomly at different percentages depending on which ROM I flash. I've tried a few different ones.
Flashing the stock ROM
(RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship) via USB always stop at 8%.
Flashing the stock ROM
(RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship) via SD card will give me an error (RADIO_V2 - RSA Fail). I've attached a picture of this error.
Since flashing the stock ROM via SD Card gives me an error (RADIO_V2 - RSA Fail), I decided to flash a new Radio (Radio_Leo_2.15.50.14), but it gives me the same error. (I've also attached a picture of this error) I haven't tried other ones because I'm not exactly sure which ones to try and I don't want to brick my phone...if it isn't already bricked yet.
Can anyone suggest some Radio that's safe for me to try flashing for my TMoUS HD2? I'm really out of ideas on what to do besides that, any suggestions would be greatly appreciated!
***EDIT 1*** (01.21.11) - Tried Task29, went all the way to 100% but the phone fails to reboot. Flashing a ROM after Task29 doesn't work Also added a picture of the bootloader screen.
***EDIT 2*** (01.21.11) - Added a list of radio and ROMs I've tried flashing in post #9.
You can flash any radio with .50. in the name.......
NEVER flash a .51. these will brick your phone.
However this doesnt sound like a radio problem. The only thing I can think to suggest is to read up on "Task 29" this will completely format your device memory and should allow you to reflash a new ROM.
Best of luck........
Thanks for your reply, Conantroutman! I just tried Task29 and it was stuck at 58% the first time, and the second time it completed all the way to 100% (With a success message from my PC) but my HD2's screen just goes black instead of rebooting. After a battery pull, I tried installing the stock ROM and the same thing still happens. It stops in the middle of updating and says there's a communication error.
Any thoughts?
Sorry, the only thing left to suggest is to try the whole process again on another PC. Also try uninstalling active sync / wmdc from your PC and trying again.
Chipped From The Bunker Via A Sandwedge
No need to be sorry I really do appreciate the help! Would upgrading/downgrading the HSPL do anything?
If it stops working using the pc then try using the sd card method.
Do a search for hd2 sd card flashing and you should find out how...
Might be more lucky without the pc in the mix, especially if there are communication errors involved...
Cheers...
ultramag69 said:
If it stops working using the pc then try using the sd card method.
Click to expand...
Click to collapse
I've actually done that as well. The flash also fails but at least it gives me an error (which I've posted a screenshot of in my first post). Not that I know what it means though Hopefully someone with more knowledge can help me decipher it.
Just a question, did you changed previously your radio? If yes to witch one?
kurt-willems said:
Just a question, did you changed previously your radio? If yes to witch one?
Click to expand...
Click to collapse
I've been reading up on how to flash stuff since I got the phone last year, but I never tried to flash anything until the beginning of this week. I'm not sure if the previous owner did though.
These are the radio I've tried this morning:
-2.10.50.26
-2.11.50.20
-2.11.50.26
-2.12.50.02.2
-2.14.50.04
-2.15.50.14
I used the SD card method to flash all the radios above. Some of the radios failed before the progress bar finished, but some actually went all the way. The phone doesn't reboot itself after it finishes though, so I have to do a battery pull. It doesn't seem to make a difference since I still can't flash any ROMs after I flash the radio.
And these are the ROMs I've tried to flash:
-CR192 Desire HD v6.5.3.0.9 Beta
-RUU Leo 1 5 TMOUS 2.10.531.1 Radio Signed 15.34.50.07U 2.08.50.08 2 Ship
-RUU Leo 1.5 TMOUS 2.13.531.1 Radio 15.39.50.07U 2.10.50.26 Signed LEO Ship
-RUU Leo 1.5 TMOUS 3.14.531.1 Radio Signed 15.42.50.11U 2.15.50.14 2 Ship
After leaving the battery out of the phone for a day, I tried Task29 again and managed to complete it (all the way to 100% and a proper restart) without freezing. So then I tried flashing a stock rom, but that stopped at around 8%. When I go into bootloader now, it seems that my HSPL has been removed and I'm reverted back to regular SPL.
If I decide to use Task29 again or flash a stock rom, do I need to install HSPL? Should I install HSPL first or just leave it alone and flash normally?
kin869 said:
After leaving the battery out of the phone for a day, I tried Task29 again and managed to complete it (all the way to 100% and a proper restart) without freezing. So then I tried flashing a stock rom, but that stopped at around 8%. When I go into bootloader now, it seems that my HSPL has been removed and I'm reverted back to regular SPL.
If I decide to use Task29 again or flash a stock rom, do I need to install HSPL? Should I install HSPL first or just leave it alone and flash normally?
Click to expand...
Click to collapse
Yes, install the right HSPL first. Then, do task 29, then you install the correct radio, lastly you can install custom rom.
Good luck
silverwind said:
Yes, install the right HSPL first. Then, do task 29, then you install the correct radio, lastly you can install custom rom.
Good luck
Click to expand...
Click to collapse
Thanks Silverwind, I'm using HSPL3 to install HSPL 2.08, but it always fails. I can install regular SPL 2.08 perfectly fine though. I'll leave the battery out for a day and try again to see if it makes any difference.
Hey all,
I am able to flash new roms, and after it does its looping i can get everything up and running, service, 3g, etc. Once i do a reboot and it loads up the rom again, i get no service, and a FC error saying "Process system is not responding"
Does anyone know the cause or how to fix this?
More info: i started on bb55 CM6.1.3 v4.5.7, upgraded to v06 and got this error
THEN i had to repair via sony pc companion, back to Rogers rom. then installed tripnmiui final, everything worked. once i rebooted i got no signal and fc msg.
Only thing i can possibly think of is your making some kind of error in the installation process of your ROMs. Repair your phone once again and follow the steps carefully on flashing new ROMs. Sounds like it could be a possible basebrand problem as well because Tripnmiui runs on basebrand .49 and .52. Should have a clean installation if you follow the steps carefully =)
thanks for the reply!
for the installation of tripnmiui i installed the rom and then changed the bb to 52. The rom was up and running, and i was able to get all services, but once i rebooted, nada...