I am wondering if it is possible to keep a copy of my contacts on my storage card, and maybe how to use UC to load it should I have to hard reset on the fly I will have a contacts list.
I have beat my head against the wall searching this site, PPCGEEKS and others looking for an answer or a tutorial.
Honestly with all of the reading I have done if I missed it I will slap myself in the face.
Any Ideas? Any comments welcome.
um, i think everything is stored in pim.vol, so if u could copy that to the appropriate folder along with any related files; i don't see why it wouldn't work... it would probably require a reset afterwards though.
Try contact backup
Try ppc contact backup application..
It creats backup of contacts and save all the contacts in a file with .csv extension.
just keep this file and contactbackup exe (does not require installation) on ur storage card
And u can restore ur contacts anytime....
Get it now
U can download from www.freewarepocketpc.net
having hacked many phones prior to my titan, I know how to export the phonebook via activesync, in .csv format. Thanks for the tip, I guess I need to figure how to load that automatically, without any software.
Thanks for the replies.
I copied the pim file over to my storage card and hard reset and was able to move it back over to the phone and it loaded my contacts. I had to rename the new pim file before I transfered the old file over. Then after a soft reset I was able to delete the renamed pim file.
User Customization Backup for Touch Pro using Sashimi
By: LuckySe7en & Murducky
LuckySe7en uses the Raphael (GSM Touch Pro)
Murducky uses the Herman (CDMA Touch Pro)
We have put together this guide for others who have a hard time locating where items need to be backup (like we did). We both use EngeryROM and for the most part some item locations below may be specific to EngeryROM.
**Download info**
* WinMo 6.5 Stuffs Links [Themes, Skins, Apps, Plugins and more] - http://forum.xda-developers.com/showthread.php?t=512121
* WM6.5 Titanium plugins - http://forum.xda-developers.com/showthread.php?t=511052
* Sashimi - http://www.winmo-experts.com/
* SDConfig.Builder.v0.7.85.PE - http://forum.xda-developers.com/showthread.php?t=390846
**Info Videos**
* We recommend watching both videos before reading below to understand just how great Sashimi is
* Sashimi Basics - http://www.youtube.com/watch?v=ANgzCqrcjHw&feature=PlayList&p=D3FC86B36CB817D8&index=0
* Sashimi Copying - http://www.youtube.com/watch?v=Ht0yxNNsZQQ&feature=PlayList&p=D3FC86B36CB817D8&index=1
**Sashimi Note**
You don't have to re-install Sashimi after a flash, just run SASHIMI.exe from the \bin directory and SASHIMI will detect and perform a clean install and reconfigure itself.
**Cabs**
Place all of your Cabs you want to install in Storage Card\SASHIMI\Auto\Cabs\
**Email Accounts & WIFI Settings**
You will create an XML file and save it to Storage Card\SASHIMI\Auto\XML using Sashimi/Makisu Built program. Watch the How To Here: http://www.youtube.com/watch?v=ANgzCqrcjHw&feature=PlayList&p=D3FC86B36CB817D8&index=0
**Ring Tone**
Using the Auto\Root folder Sashimi create the same folder structure to copy over your ring tones.
* Ring tones go in \My Documents\My Ringtones
* Text msg/Notification tones go in \Windows
* Sliding Sounds go in \Windows as .wav
Ex. Storage Card\SASHIMI\Auto\Root\My Documents\My Ringtones
so here is the run down about ringtones...before you back up these registries make sure you set them how you like first.
*Ring Tone*
First set the Ring Tone then back up HKCU\ControlPanel\Sounds\Ringtone0 is where your ringtone registry is, for some reason there is two entries that reference my ringtone file, RingTone0 and RingTone2. I exported both in Storage Card\SASHIMI\Auto\REG
*ALERTS AND NOTIFICATIONS*
In HKCU\ControlPanel\Notifications\ there are a bunch of registries for all your alerts, they are all labeled in gibberish like this "{0CD9B91C-BEA7-446d-9857-BD2F1E6BFE80}" You have to use regedit and look at the first value, the first value should contain data that tells you what tone that registry entry is for. If the first value is blank don't back it up, there are more entries than there are alerts so you dont need to back up the blank ones. There is exactly 22 entries you need to export and back up to Sashimi. It was a PITA (Pain in the ***) to go through them and export them one by one, but you get done eventually.
All Registry exports should go into Storage Card\SASHIMI\Auto\REG
**Sliding Sound**
First set the Sliding sound you want then back up the reg key \HKLM\Software\HTC\SlidingSound export to Storage Card\SASHIMI\Auto\REG
We both prefer Titanium.
**Titanium**
Setup Titanium the way you like it first before backing up the items below.
*Titanium layout*
* First you have to back up HKLM\Software\Microsoft\CHome reg entry so it will keep your titanium layout.
* You also need to back up the two .cpr files located in \Windows: Titanium_480x640.cpr and Titanium_640x480.cpr and copy them to Storage Card\SASHIMI\Auto\Root\Windows
*Set Titanium as Default | Touch Flow as Disabled**
* Back up Reg Key \HKLM\Software\Today\Windows Default export to Storage Card\SASHIMI\Auto\REG
* Back up Reg Key\HKLM\Software\Today\Touch Flo export to Storage Card\SASHIMI\Auto\REG
**ATCONTACTS**
backup reg key HKLM\Software\Microsoft\CHome\ATFavePeople are all the registry entries that you need to save those settings, I didn't know what to back up so I backed up all of them, they all look important anyways.
Also will want to back up \Application Data\ATContacts and copy to Storage Card\SASHIMI\Auto\Root\Application Data\ATContacts which saves image files.
*Note*
* Restore your contacts before launch the "fave people".
* ON First Run after restore - you will have an overlay on your first contact on fave people - make sure you have restored your contacts then just go to the favorite person settings and click okay.. it will fix the overlay
**TouchFlo3d Fav Contacts Tab**
If you are using TouchFlo3d and want to save your favorite contacts that information is stored in the pim.vol file located in your root directory, just back that up. pim.vol also contains all of your contacts! No need to use pim backup app unless you want to save all ur txt messages, recent calls list, etc.
**Titanium Weather**
Backup key \HKLM\Software\TitaniumWeather export to Storage Card\SASHIMI\Auto\REG
**Owner Info **
Download SDConfig.Builder.v0.7.85.PE from http://forum.xda-developers.com/showthread.php?t=390846
Run SDConfig Builder.exe, go to the 5 tab (Owner Info), type in your Owner Info. Save to xml file. Then go to 4 tab (Cab & Copy).
Browse for the xml you just made for Source XML, set an output directory. then click make cab. Now you have a owner cab you can push with Sashimi put owner cab in Storage Card\SASHIMI\Auto\Cabs\
**Device Name**
Backup reg key HKLM\Ident export to Storage Card\SASHIMI\Auto\REG
**Alarm Settings**
backup reg key HKLM\Software\Microsoft\Clock export to Storage Card\SASHIMI\Auto\REG (thanks to studentjunk)
**Facebook IM (fim)**
backup reg key HKCU\Software\mosko.mobi\fim export to Storage Card\SASHIMI\Auto\REG
**Twitter (PockeTwit)**
Backup file \Program Files\PockeTwit\app.CONFIG copy to Storage Card\SASHIMI\Auto\Root\Program Files\PockeTwit\
(You will have to create the path in your Auto\Root Folder)
**MMS Settings**
backup reg key \HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\mm1 export to Storage Card\SASHIMI\Auto\REG
**HTC Task Manger**
backup reg key HKEY_CURRENT_USER\Software\HTC\TaskManager export to Storage Card\SASHIMI\Auto\REG
**Splash Screen**
* back up file \Windows\welcomehead.192.png copy to Storage Card\SASHIMI\Auto\Root\Windows
* Open welcomehead.192.png overwrite with your own image save as a png. Now you have a custom Splash screen that will be pushed.
**Startup Sound**
* back up file \Windows\PowerOn.wav copy to Storage Card\SASHIMI\Auto\Root\Windows
* Overwrite PowerOn.wav with your custom Sound save back to Storage Card\SASHIMI\Auto\Root\Windows
* back up file\Windoes\PowerOff.wav copy to Storage Card\SASHIMI\Auto\Root\Windows
* Overwrite PowerOff.wav with your custom Sound save back to Storage Card\SASHIMI\Auto\Root\Windows
* Now you have a custom Startup Sound that will be pushed.
**Work in Progress**
(if you know how to backup the below please let us know)
**WALLPAPER**
* HKCU\Software\Microsoft\Today\Wall is the key you want to back up for wallpaper and theme
* This is the reg location but on restore it has it set in the today screen but does not actually change the wallpaper till you go to Today and click okay.
**Facebook**
* Facebook registration is at "HKCU\Software\Microsoft\Facebook
* But on restore does not have your login info saved.
**PowerSMS**
* Reg Key HKC\Software\Trinket\PowerSMS
* But still can not find the registration key location
**PIN**
TBF (To Be Found)
**Voicemail Number (when you added your password to it**
TBF (To Be Found)
**Contact Ring Tones**
TBF (To Be Found)
Hey this is LuckySe7en, mods can we get this sticky'd?
hello
i have a question: i want to backup my favourite people, but in my registry there isn't a entry "ATFavePeople"!!
What can i do?
Greetz
mare123
Nice work! I am just looking for a complete list that need to re-configure after a flash or hard-reset.
Catch up, thanks.
murducky said:
User Customization Backup for Touch Pro using Sashimi
**Owner Info **
Download SDConfig.Builder.v0.7.85.PE from http://forum.xda-developers.com/showthread.php?t=390846
Click to expand...
Click to collapse
I believe Sashimi backs up owner info already. Open Sashimi and go to tools\additional tools\backup PIM. Although, I have to admit that I back it up by just putting the registry key in the regexport file: HKCU\ControlPanel\Owner. I am not sure if it works for everyone, but it works for me.
murducky said:
**Alarm Settings**
TBF (To Be Found)
Click to expand...
Click to collapse
Alarm settings are just in registry: HKLM\Software\Microsoft\Clock
An easy way to find registry settings demonstrated here at the sashimi website (I believe, I didn't look at it myself)
murducky said:
**Contact Ring Tones**
TBF (To Be Found)
Click to expand...
Click to collapse
Download VipPimRingTone and backup ring tones before flashing. If you use total commander, then you can use my script (VGA only) for the restore. The script has to be used AFTER the contacts have been restored.
Code:
Run ("\Program Files\VipRingTone\VipPimRingTone.exe")
sleep(10000)
mouseclick(421,87)
sleep(2000)
mouseclick(243,151)
sleep(2000)
mouseclick(287,564)
sleep(2000)
mouseclick(252,437)
sleep(4000)
mousedblclick(165,287)
sleep(2000)
SleepMessage(50, "Restoring calltones.^NL^Click Ok When Completed.^NL^Click Ok now to Cancel", ThisScriptName, 1)
exit
If you use PPCPIMbackup, you can also automatically restore your contacts & data:
Code:
Run( "\Program Files\Total Commander\cecmd.exe")
sleep(5000)
mouseclick(209,68)
sleep(2000)
sendkeys("\Storage Card\My Documents\BACKUPS\")
sleep(7000)
mouseclick(430,107)
sleep(2000)
mousedblclick(164,139)
sleep(12000)
mouseclick(395,546)
sleep(8000)
sendleftsoft
sleep(20000)
sendleftsoft
sleep(4000)
sendleftsoft
sleep(10000)
SleepMessage(420, "Running PPCPIMbackup.^NL^Click Ok When Completed.^NL^Click Ok now to Cancle", ThisScriptName, 1)
Exit
And you can automatically start your backup schedule. Puth the PIM registry in the regexport file: HKCU\Software\FdcSoft\PPCPimBackup
Code:
#rerun to set it to run at 2am tomrrow
Rerun = Timestamp()/86400*86400+86400+10800
runat(rerun, "\Storage Card\SASHIMI\Auto\Root\Windows\PPCPimBackup.exe","/SchedBackup")
SleepMessage(3, "script completed.^NL^Click Ok^NL^Your backups should start tomorrow", ThisScriptName, 1)
exit
mare123 said:
hello
i have a question: i want to backup my favourite people, but in my registry there isn't a entry "ATFavePeople"!!
What can i do?
Greetz
mare123
Click to expand...
Click to collapse
**push**, because i don't know where this entry is.
does anyone know how to backup microsoft myphone login settings or resco file explorer key with sashimi? i did compared the regitrys before they were in and than after but it doesnt work..it looks like a binary code in a certificate and not a reg that it stores it in..please help!
mare123 said:
hello
i have a question: i want to backup my favourite people, but in my registry there isn't a entry "ATFavePeople"!!
What can i do?
Greetz
mare123
Click to expand...
Click to collapse
What are you using for your "favorite People"
I use Favorite People Plugin by AppStar [All Resolutions]
http://forum.xda-developers.com/showthread.php?t=506221
studentjunk said:
I believe Sashimi backs up owner info already. Open Sashimi and go to tools\additional tools\backup PIM. Although, I have to admit that I back it up by just putting the registry key in the regexport file: HKCU\ControlPanel\Owner. I am not sure if it works for everyone, but it works for me......
Click to expand...
Click to collapse
Thanks for the great info. I use outlook to store all my contacts & appointments and just sync after a flash. so i was looking for a reg key or something that saves the ringtone assignment of contacts.
murducky said:
Thanks for the great info. I use outlook to store all my contacts & appointments and just sync after a flash. so i was looking for a reg key or something that saves the ringtone assignment of contacts.
Click to expand...
Click to collapse
Looking for that too, and also for a reg or file to backup my favorite people tab contacts.
Troc said:
Looking for that too, and also for a reg or file to backup my favorite people tab contacts.
Click to expand...
Click to collapse
**ATCONTACTS**[/B]
backup reg key HKLM\Software\Microsoft\CHome\ATFavePeople are all the registry entries that you need to save those settings, I didn't know what to back up so I backed up all of them, they all look important anyways.
Also will want to back up \Application Data\ATContacts and copy to Storage Card\SASHIMI\Auto\Root\Application Data\ATContacts which saves image files.
*Note*
* Restore your contacts before launch the "fave people".
* ON First Run after restore - you will have an overlay on your first contact on fave people - make sure you have restored your contacts then just go to the favorite person settings and click okay.. it will fix the overlay
mare123 said:
hello
i have a question: i want to backup my favourite people, but in my registry there isn't a entry "ATFavePeople"!!
What can i do?
Greetz
mare123
Click to expand...
Click to collapse
Troc said:
Looking for that too, and also for a reg or file to backup my favorite people tab contacts.
Click to expand...
Click to collapse
As mentioned before use the registry entries listed in OP to back up ATcontacts, if you do not use ATcontacts plugin for Titanium those entries won't be there.
If you are using TouchFlo3d and want to save your favorite contacts that information is stored in the pim.vol file located in your root directory, just back that up. pim.vol also contains all of your contacts! No need to use pim backup app unless you want to save all ur txt messages, recent calls list, etc.
-luckyse7en
sstrunks said:
As mentioned before use the registry entries listed in OP to back up ATcontacts, if you do not use ATcontacts plugin for Titanium those entries won't be there.
If you are using TouchFlo3d and want to save your favorite contacts that information is stored in the pim.vol file located in your root directory, just back that up. pim.vol also contains all of your contacts! No need to use pim backup app unless you want to save all ur txt messages, recent calls list, etc.
-luckyse7en
Click to expand...
Click to collapse
okey thank you very much i will try this, because i use touchflo3d
greetz
sstrunks said:
As mentioned before use the registry entries listed in OP to back up ATcontacts, if you do not use ATcontacts plugin for Titanium those entries won't be there.
If you are using TouchFlo3d and want to save your favorite contacts that information is stored in the pim.vol file located in your root directory, just back that up. pim.vol also contains all of your contacts! No need to use pim backup app unless you want to save all ur txt messages, recent calls list, etc.
-luckyse7en
Click to expand...
Click to collapse
added to list. thanks se7en
murducky said:
**ATCONTACTS**[/B]
backup reg key HKLM\Software\Microsoft\CHome\ATFavePeople are all the registry entries that you need to save those settings, I didn't know what to back up so I backed up all of them, they all look important anyways.
Also will want to back up \Application Data\ATContacts and copy to Storage Card\SASHIMI\Auto\Root\Application Data\ATContacts which saves image files.
*Note*
* Restore your contacts before launch the "fave people".
* ON First Run after restore - you will have an overlay on your first contact on fave people - make sure you have restored your contacts then just go to the favorite person settings and click okay.. it will fix the overlay
Click to expand...
Click to collapse
Up to now i always had problems to restore ATfave people. If i do it the way you indicate, the overlay in the first contact gets fixed, and also the contact opens right, but the rest of the contacts if wrong, i think they shift one contact up in my icontact list. I always have to set them new again
claus1953 said:
Up to now i always had problems to restore ATfave people. If i do it the way you indicate, the overlay in the first contact gets fixed, and also the contact opens right, but the rest of the contacts if wrong, i think they shift one contact up in my icontact list. I always have to set them new again
Click to expand...
Click to collapse
Heres how I do it and it always works for me, since murducky uses outlook to backup his contacts it might be different than how he explained it.
Obviously first you set all your ATcontacts first. Then back up all the registry entries mentioned in the first post.
After you back up all your registry keys for ATcontacts you will want to back up your contacts. You can do this by using pim backup app or you can just copy the pim.vol file from your root directory.
After you flash your rom and run through sashimi it should reinstall ATcontacts as well as restore those registry entries. Before you do ANYTHING with ATcontacts, that includes going to the tab and even going into the ATcontact settings you must restore your contacts. So run pim restore in pim backup or copy your pim.vol file back to your root directory and overwrite the one that is there.
Once you have restored your contacts, now go to your fave people tab on titanium and then scroll left to go to the settings, once you are in the settings you should see your list of contacts in correct order, just hit ok and close the window at that point and it should be restored with no overlay.
Basically you must restore contacts first and then go to settings to correct the overlay issue. Also worth mentioning is that if you choose to back up the pim.vol file instead of running pim backup, you should probably copy pim.vol over to the root directory before running sashimi after a fresh rom flash. I've had problems running sashimi first and then copying the pim.vol file over after. I causes the roms to become really unstable and laggy for some reason.
2nd NOTE: if you try to copy your pim.vol file into the SASHIMI/Auto/Root folder so that sashimi can restore it when it runs it won't work, I've tried that many times and it seems sashimi wont copy anything that isn't in one level deep file structure. So pim.vol must be copied over manually if you choose to back up your contacts that with that method.
-luckyse7en
sstrunks said:
Heres how I do it and it always works for me, since murducky uses outlook to backup his contacts it might be different than how he explained it.
Obviously first you set all your ATcontacts first. Then back up all the registry entries mentioned in the first post.
After you back up all your registry keys for ATcontacts you will want to back up your contacts. You can do this by using pim backup app or you can just copy the pim.vol file from your root directory.
After you flash your rom and run through sashimi it should reinstall ATcontacts as well as restore those registry entries. Before you do ANYTHING with ATcontacts, that includes going to the tab and even going into the ATcontact settings you must restore your contacts. So run pim restore in pim backup or copy your pim.vol file back to your root directory and overwrite the one that is there.
Once you have restored your contacts, now go to your fave people tab on titanium and then scroll left to go to the settings, once you are in the settings you should see your list of contacts in correct order, just hit ok and close the window at that point and it should be restored with no overlay.
Basically you must restore contacts first and then go to settings to correct the overlay issue. Also worth mentioning is that if you choose to back up the pim.vol file instead of running pim backup, you should probably copy pim.vol over to the root directory before running sashimi after a fresh rom flash. I've had problems running sashimi first and then copying the pim.vol file over after. I causes the roms to become really unstable and laggy for some reason.
2nd NOTE: if you try to copy your pim.vol file into the SASHIMI/Auto/Root folder so that sashimi can restore it when it runs it won't work, I've tried that many times and it seems sashimi wont copy anything that isn't in one level deep file structure. So pim.vol must be copied over manually if you choose to back up your contacts that with that method.
-luckyse7en
Click to expand...
Click to collapse
That is the way i do it when flashing a new rom:
Backing up files and registries with sashimi
Backing up contacts with pimbackup
Flashing rom
Running sashimi to restore everything and setting up my email account
Restart
Restoring with PIMbackup
Restart
Setting up what is still missing like BT, WiFi, Internet connection etc
Restart
Then trying out the plugins in Titanium to see that everything works
That should be the procedure like mentioned above, or do i miss something? Still the AT fave people gets mixed up. The same happens when i install a new theme that overwrites the AT fave people plugin and its registry. Then i restore the registry backup i have and again the contacts gets mixed up.
claus1953 said:
That is the way i do it when flashing a new rom:
Backing up files and registries with sashimi
Backing up contacts with pimbackup
Flashing rom
Running sashimi to restore everything and setting up my email account
Restart
Restoring with PIMbackup
Restart
Setting up what is still missing like BT, WiFi, Internet connection etc
Restart
Then trying out the plugins in Titanium to see that everything works
That should be the procedure like mentioned above, or do i miss something? Still the AT fave people gets mixed up. The same happens when i install a new theme that overwrites the AT fave people plugin and its registry. Then i restore the registry backup i have and again the contacts gets mixed up.
Click to expand...
Click to collapse
Hmm I'm stumped then, I tried doing it both methods and it has worked for me. But now I just backup pim.vol and then use pim backup to back up everything else but contacts. How bout giving that a try?
If your themes are writing over your registry why not try installing the theme first in Sashimi manual mode, and then run auto mode so that your registry settings write over the new theme registry?
-luckyse7en
sstrunks said:
Hmm I'm stumped then, I tried doing it both methods and it has worked for me. But now I just backup pim.vol and then use pim backup to back up everything else but contacts. How bout giving that a try?
If your themes are writing over your registry why not try installing the theme first in Sashimi manual mode, and then run auto mode so that your registry settings write over the new theme registry?
-luckyse7en
Click to expand...
Click to collapse
Ok, will give both option a try. Had also contacted AppStar to ask for help on that but looks he is unavailable.
claus1953 said:
Ok, will give both option a try. Had also contacted AppStar to ask for help on that but looks he is unavailable.
Click to expand...
Click to collapse
You may already know this but I just want to reiterate that all ATFavePeople registries must be backed up. So that means the main ATFavePeople registry, CondensedPage, Page1, Page 2, Page3, etc. Obviously there is a page for every fave contact you have.
You probably already got that convered but just an FYI for anyone else troubleshooting the same issue.
-luckyse7en
TitaniumBackup does not backup my APK anymore. I think this happen after i update to LP 5.0.2. Is it not working properly on LP?
I even did a factory reset and it's still the same. Everytime I backup my apps, after complete, the icon is a tick. Used to be a smiley face.
Anyone have a fix for this?
EDIT: OK I found out it does backup everything include APK on the first run, subsequent run it only detect the app data and the icon change from a smiley to a tick.
ljhsquall said:
TitaniumBackup does not backup my APK anymore. I think this happen after i update to LP 5.0.2. Is it not working properly on LP?
I even did a factory reset and it's still the same. Everytime I backup my apps, after complete, the icon is a tick. Used to be a smiley face.
Anyone have a fix for this?
EDIT: OK I found out it does backup everything include APK on the first run, subsequent run it only detect the app data and the icon change from a smiley to a tick.
Click to expand...
Click to collapse
The reason is in LP TB how adds .txt to its .properties file and TB itself cannot recognize..
Nobody had the same as issue as me? How can this be?
I have the same issue.. How did you fix this???
ljhsquall said:
The reason is in LP TB how adds .txt to its .properties file and TB itself cannot recognize..
Nobody had the same as issue as me? How can this be?
Click to expand...
Click to collapse
I think I may have a related issue.
This is my problem description:
- phone: Samsung S4 I9505 upgraded to Lollipop 5.0.1, rooted with CF-Auto_Root
- using Titanium Backup version 7.1.2
1. set backup location to SD card using the DocumentProvider interface
2. after "Calculating scenarios" for different batch actions, for "Redo backups for modified data" shows 402 backups to be redone
3. run the scheduled action "Redo backups for modified data"
4. immediately afterwards, there are still 402 backups to be done
and
- "Calculating scenarios" never seems to finish. It's as if TB is having trouble scanning the backups
- the "properties.txt" files are created in the backup folder but they are empty files
I sent a report of a possible bug to Titanium Backup support.
I'm amazed this bug isn't more widely reported.
At a guess, the DocumentProvider API allows some sort of file type hint when creating a file and TB is optimistically setting this to text rather than whatever binary format is used for the archives, and for god knows what reason android is appending a .txt file extension.
I've spent the best part of a day banging my head against a wall trying to figure out why my backup couldn't be restored. Thank **** I found this thread, I was close to admitting defeat and starting from scratch.
Just to assist people in finding this, here's some of the stuff I googled for: "has app no", "no restore button", "restore question mark", "unknown"
I was lucky that my google-fu led me to this thread, and another one about Titanium backup adding .zip after .gz because I took a backup of my S5 yesterday, upgraded and hard reset, and then it couldn't find any backups. I knew they were there, but it turned out that both those bugs had struck me at the same time! So I copied the directory to the SD card, took the card out of the phone, put it into my pc and did a bit of old school "ren *.zip *." and "ren *.txt *." which put it all right again. Thanks for the thread!
Mastiff said:
I was lucky that my google-fu led me to this thread, and another one about Titanium backup adding .zip after .gz because I took a backup of my S5 yesterday, upgraded and hard reset, and then it couldn't find any backups. I knew they were there, but it turned out that both those bugs had struck me at the same time! So I copied the directory to the SD card, took the card out of the phone, put it into my pc and did a bit of old school "ren *.zip *." and "ren *.txt *." which put it all right again. Thanks for the thread!
Click to expand...
Click to collapse
renaming files work
This issue is not fixed even in 7.4.0.2 version of TB on LP. But this issue depends on ROM, because on CM12.1 it didn't reproduce.
Here is the fastest fix for Windows:
1.Open cmd
2.Switch drive to sdcard
3.Go to titanium backup folder (or wherever your backups are)
4.Execute two commands:
rename *.gz.zip *.
rename *.properties.txt *.
Example sequence of commands:
g:
cd G:\backup sept 2016\TitaniumBackup
rename *.gz.zip *.
rename *.properties.txt *.
saneksem said:
This issue is not fixed even in 7.4.0.2 version of TB on LP. But this issue depends on ROM, because on CM12.1 it didn't reproduce.
Here is the fastest fix for Windows:
1.Open cmd
2.Switch drive to sdcard
3.Go to titanium backup folder (or wherever your backups are)
4.Execute two commands:
rename *.gz.zip *.
rename *.properties.txt *.
Example sequence of commands:
g:
cd G:\backup sept 2016\TitaniumBackup
rename *.gz.zip *.
rename *.properties.txt *.
Click to expand...
Click to collapse
Unfortunately, this didn't made the trick for me... When restoring any update (app+data) it takes so many time that it doesn't end... I don't know what the hell happened...
Hello.
There was a big trouble, because there are ugly men, perverted a good file manager (in the past, unfortunately...) ES File Explorer.
After i flashing my Fly Magic, as usual, I decided to restore the backups Titanium.
I do not remember why, but I opened file manager and this bastard invited me to clean the "rubbish".
I have not looked, clicked on something and he removed all backups...
Using of the best file recovery program "dmde" - did not help...
But it turned out that before I pulled from the SD-card, along with the garbage, .android_secure folder.
Search the Web showed it just will not work to recover the information from there, because it is encrypted.
A AppsOnSD.sks key, of course, already been overwritten after flashing ...
.asec files are opened by AndroidStudio, but in the form of gibberish.
Question: I'm a complete zero (nuub and dummie) in the programming, though "on you" with IT-sphere.
Strongly request help on the issue of the content of the .asec files WITHOUT "AppsOnSD.sks" key
In fact, I need to get from one app - it is the Old notepad (Ultra Notes app), and that is the russian text. All the rest does not matter.
Thank you in advance.