1. CWM installed
2. Vegan tab running
3. I was using my g tab reading PDF and then there is this pop up in the bottom of the screen that SD card invalid or something that you need to format, coz I just changed my SD Card2 from 2 to 8,thinking it was the sd card2 I pressed the format and it did mad I was able to used (review for midterm ) it untill 13% of the batt coz Im about to sleep so I charged it, thinking that everything is fine with the tablet. A day after I turni it on I just saw VEGAN tab flashing 2x then blank then flash again, thinking something goes wrong I go to recovery mode then press restore won't do it error something on the SD card. I thought my wife use it and asked her and said No I didn't. So I plugged it in the unit in Win7 PC and to my horror the g tab was formatted recognized as drive G>SD card 15.1
Now I search all forum regarding NVFlash,recovery and follow the instruction and seems like it doesn't go through.
I try this
http://forum.xda-developers.com/showthread.php?t=1010943
next is this
http://forum.xda-developers.com/showthread.php?t=1030042
http://forum.xda-developers.com/showthread.php?t=1008245
I don't know where to look now, coz all of my search brings me here at xda forum.
Can anybody help me rebuild my G tab from scratch coz I can't get Viewsonic support all calls are drop.
Can someone kindly post the procedure in Lay Man's term. Thank you.
Never mind, got it fix, ^_^
How to fix it? I got same problem
just download the original unlock bootloader, rename the zip to update.zip. then apply SD2 card.Just like what you did in flashing it.
Related
:evil:
Hi guys,
I need some serious help here. Today I tried to upgrade my MDA II with the latest 1.60 ROM. Somehow during the upgrade something went wrong and my computer frooze and needed a reset. This was in the beginning 10 minutes of the ROM upgrade and my the screen of my PPC went off. After the reboot of my workstation I could not get my MDA II to connect to my workstation. The MDA is completely useless now. The only thing I have on the screen is:
Serial (or USB) on top of the screen (with no backlight) and at the bottem of the screen Version 1.01.
I can't soft reset of hard reset. I took the battery out and waited for almost 30 minutes but I still can't turn the thing on nor can I soft or hard reset. I can't thing of anything else that I can do and I just sold my Loox yesterday so now I'm lost!
Anybody with a good suggestion??
Please help.
Regards,
Wouter
The Netherlands
I think it's a way to use a SD-card with a Rom on it.
Looks like Your bootloader is still working and can reflash a rom to Your device.
Now You have to find somone with an 64MB SD-card to put a rom on it and reflash Your device.
With best regards
Jens
Hi Jens,
I think my bootloader is not working anymore. I tried to do a hard reset a dozen times but the bootloader menu doesn't come up. But thanks for suggesting though.
Wouter
Hi wouterk,
I don't know if this would be of any help, but you've got nothing to lose now.
I've got a similar error that the RUU program asked me to remove my XDA II from the cradle and right after that, the XDA II screen freeze at "Seria 1.01", same as yours.
So I put my XDA II back to the cradle and from my PC, I clicked Control Panel > System > Device Manager > and here my XDA II was recognized as an unknown device, so I updated the MS USB Sync driver.
After the driver update, I rerun the RUU and the ROM upgrade went fine. Now I have my XDA II back alive and kickin' with the new MDA ROM. At least this works for mine and hope it would also work for yours as well.
HTH.
Hi Joparp,
Of course I gave your suggestion a try. But too bad it didn't work for me like that :? . I remebered that when my workstation crashed, after the reboot it found a new USB device (my cradle?) but I couldn't get your sollution to work for me. But I still have hopes. Tomorrow evening I'll meet a guy who can fix my problem (keep my fingers crossed....). So I feel reasonable relaxed now.
It is nice to see that so many people responded to my problem. I posted my problem on three different sites and many people responded. That was a nice feeling! I keep this thread posted about the result of tomorrow.
B.t.w did you install the 1.60 ROM eventually?
Wouter
Hello wouterk
well, i'm sorry about this and i guess the safest way to do ROM update thru SD Card.
i do agree with jenson suggestion and i can't see any other way to resolve this problem which i hope will work here are the steps as follows :-
ask any one who has MDA II device, 64MB SD Card and SD Card reader to backup his/her ROM and Post it for you somewhere where you can download it and write it to SD Card.
ofcourse he/she if using Windows will need serial cable and hyper terminal software which normally can be fount under start/programs/Accessories/Communication otherwise download from http://www.hilgraeve.com/htpe/index.html
get the device into Bootloader Mode ( power button+any direction+reset )
Connected via Serial cable and use these setting 115200 baud, 8n1, direct to com1 port or maybe com2 it depends on which port they use
type d2s command to backup ROM to SD Card which i recommend 64MB SD card formatted and when done you will see something look like this
D:Waiting for card insert.........
SDetected one card
SD:ready for transfer OK
Total card size=3D40000ze=0
SDCARDD2S+,cStoragePlatformType=FF
********************************************************************************
***********************************************
Store image to SD/MMC card successful.
SER>
then reset the device and get SD card reader and insert this card into the reader and use ntrw image reading and writing tool
if you don't have it you can download it from here http://www.tamiminet.com/othman/ntrw.exe
from the command line run ntrw read MDAII.nb1 E:
This assumes your SD card reader has drive letter E:
now you will have new file which is MDAII.nb1 it's about the size of the SD card zip it and post it somewhere so he/she can Download it and unzip it then write it back to SD Card using this command b]ntrw write MDAII.nb1 E:[/b]
again this assumes your SD card reader has drive letter E:
when done go into bootloader mode ( power button+reset ) with SD card inserted, hit camera button and flash your device with rom which is on SD Card
if you don't have serial cable you still can do it using Linux with cardle and thanks for bio and few other cool guys who mentioned this hints on other thread
put your device in bootloader mode
connect via cradle
use any terminal (minicom) to connect to the used port (/dev/ttyUSB0)
- you should see something like 'USB>' or 'SER>'
put an SD Card into device
type d2s on command prompt
wait untill you see Store image to SD/MMC card successful
i don't think this will include the Applications on the Extended ROM but no problem this can be done later.
i hope this could help to get back you device to life.
best regards and good luck.
Othman
Riyadh, Saudi Arabia
It is working again!
:lol:
Hi guys,
Thanks to Akira my MDA II is working again. Everything is working again exept for the bluetooth communication with my Emtac bluetooth GPS. That problem still remains in my case. I even did another hard reset but still the same problem. I then put the Towa fix again on it and now I can use my GPS again.
So thank you all guys!
Wouter
So, like the title says, I wish to upgrade my rom without the use of a sync cable (the one I have glitches). Bluetooth is probably out of the question, but I was thinking there might be a flash upgrade boot option of sorts, that'd allow me to upgrade through the use of an micro sd-card or so.
Any ideas?
(before you ask, I charge the battery with an external charger).
A lot of the phones are capable of upgrading from the rom image on the SD card - if you extract the nbh and rename it (I forget the name - search the hermes forum) and put it on a blank phone - you probably can do it that way. I've not tried it but it's likely to work!
Edit:
Here's the link to the procedure for the hermes:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
You probably have to name the image something other then HERMING.nbh - maybe STARIMG.nbh? Just a thought. Remember - I don't know for sure this will work - doing so might cause the world to implode but I suspect if it works, it works - otherwise it doesn't.
Ok, thanks for the quick reply. Just tried with STARIMG.nbh aswell as STAR100IMG.nbh in the root folder of a recently formatted sd-card, but no go. The text "searching sd-card" that flashed by right before I get the test screen does however indicate that it's a viable method for updating the ROM, so I'll keep going and try some other names for the ROM image.
If you figure out the name, please post so we know how to do it
I would also be very interested in this ... anyone figured out the correct filename yet?
On mine it's STARIMG.nbh.
The card needs to be formatted FAT32.
I've never tried SD card flashing with SoftSPL, but you would need SoftSPL to flash a non-OEM ROM.
ok my phone is HTC 8525, with WM 6.1 professional . It worked fine for 3 days then it start freezing , before it does that a blue background will appeare ,then it will not let me do anything at all . When I try to touch an icon, it will say something like invalid location or could not find target . I have to hard reset it. sometimes I have to reset it 4 or 5 times a day . , In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ? please help me I truly appricat it . In addition, the mini card will freeze the whole phone is there is a solution like reinstall the whole thing ?
Hmmm, "the mini card will freeze the whole phone"??? Are you referring to the SD Storage Card? Do you have any volatile data stored on the card? Any Today Screen Applications?
If this is the case, try shutting off the phone and removing the card. Then place the card into a card reader, and plug it into your PC. Make a folder on the desktop of your PC, and COPY all the contents of the SD card to the folder.
Now, reformat the SD card in your PC, as FAT32, and default for all characteristics.
Once reformatted, copy all that stuff back onto the SD card from the temp folder on your desktop, making sure everything is returned to it's original locations. Pop the SD card back into your phone and see if it's fixed. Sometimes, corrupted space on the SD card will make the phone behave very badly. Hopefully, this procedure might fix it for you.
-pvs
Yes Sir, i apaologize , i was refering to the SD card . i am just tierd resetting the phone every 4 hrs . do you recomend any shops that can fix the soft -ware . i notices when i start the phone and i go to clean tmp it will say" 8 Fils and 4 folders of 656 Bytes cleard ! . then 5 hrs later the blue screen comes back
After doing what pvs said, and if you still have problems I'd check for bad blocks with MTTY... I would also ,after confirming no bad blocks, would flash a stock rom then reflash wm 6.1 and see if that helps... Cheers...
Wow , how to do all that if you dont mind me asking , actually i took the SD card out i am not in need for it at the moment . can you please help me to do what you said and i truly appreciat it , Great thanks for both of you gents
pvs already says what to do in his previous post...
To check for bad blocks follow this : http://forum.xda-developers.com/showthread.php?t=377389
To Flash a stock rom you need to know what carrier the phone was on. Download the wm6 update from their site and, Making sure you have Hard SPLed your phone, I suggest flashing via the sd card method. Its safer than flashing through pc.
Format sd card fat32. copy .nbh file of the stock rom (you may have to search for it) onto the sd card and rename to "hermimg.nbh". Put back in hermes and reset to bootloader (power button, OK button above flywheel and soft reset with stylus. Hold all buttons until it goes to tri-colour screen). It should recognise the os flash and load up a screen showing 1st boot screen, 2nd boot screen, gsm And os (or something like that as cooked roms don't generally have the gsm part). MAKE SURE YOU HAVE AT LEAST 50% BATTERY!!!!! Follow the prompts... I generally use the sd card method to flash ALL my roms so I don't have problems like usb disconnecting or pc rebooting/hanging or power failures.
Hope this helps you out, Cheers...
BASELABBAS ... Please describe what you are doing when you say that you are "HARD-RESETTING" several times a day. Are you:
1) poking the stylus into the hole at the base of the unit?
- or -
2) holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]?
If you are doing the first ... this is called a SOFT reset. The second is a HARD-RESET, and will wipe the phone clean of ANYTHING outside of what came with the ROM itself.
Since you have posted that you already removed the SD Card from the device, and can (for the time-being) live without it, I recommend you do an ACTUAL Hard Reset (backup anything you need to keep first) via step #2 above, and then be patient about installing any apps. I wouldn't do anything more than sync it up via ActiveSync with your contacts for the first few of days. If things start to go crazy without any third-party apps installed, then I would look into the steps that ultramag69 has suggested ... starting with a flash to a stock ROM.
WM6.1 has been a bit shaky on our Hermes thus far. Some people are getting good results, but a lot of others are having issues like you are describing. I would suspect that your ROM might not be a good match, before I'd suspect bad blocks at this point (and it's a bit easier to test for).
If the stock rom does better on your device, you can try flashing back up to a WM6.1 ROM after that. And if you haven't already, make sure that you have installed HARDSPL before doing any of this stuff.
Good luck,
-pvs
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR]. I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
it looks like i need to update
this what is say
From :
Image Version : TNT.19199
to
image version 2.05.255.1
BASELABBAS said:
Mr. pvs , I am doing the #2 holding down the two soft-keys WHILE poking the stylus into the hole until the confirmation screen appears, and then opening the keyboard and typing 'R' and then [SPACEBAR].
Click to expand...
Click to collapse
OK, well that's definitely a Hard Reset. So your WM6.1 Rom is acting flaky right aftwerwards, eh? I would say it's time to try a different ROM, as we've been discussing above.
BASELABBAS said:
I tried to download Hard-SPL 1[1].10, when I open it on my PC it will give me instructions then when I press upgrade I will see 4 color screen the Sync icon will disappear and then it will say that it lost connections.
Click to expand...
Click to collapse
No ... try Hard-SPL-V7.zip found at the bottom of THIS PAGE. I THINK you can flash it via the SD method if ActiveSync isn't working for you (if not, somebody please correct me). To do this, open the downloaded ZipFile with WinZip or WinRAR and copy the file inside named RUU_signed.nbh to your desktop. Rename it HERMIMG.NBH, and copy it to the root of your freshly reformatted (FAT32) Storage Card. Put the Storage Card into your device and press the side OK button and the power button simultaneously while resetting with the stylus until the tri-color screen appears and turns white. The device will find the HERMIMG.NBH file and offer to upgrade by pressing the Power Key. This will install HardSPL onto your device without the need for ActiveSync. You can also flash ROMs in this manner.
Again, good luck,
-pvs
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
ultramag69 said:
No, You need to run a file from the phone itself to install hard SPLvia sd card. You can find it on page 116 of the hard SPL or how not to brick your hermes thread.
Cheers...
Click to expand...
Click to collapse
Thanks for checking me on that, Ultramag. I had a feeling there was something I was forgetting.
-pvs
i rooted my tablet successfully about a week ago. then tried to apply a skin i found on tablet market. it shut off rightt away and now wont boot past the loading cirle screen. i cas n get into recovery but every thing on this site ive read about & tried has not worked. either it doesnt show files i put on sd card. oe'er the file leads to an empty folder if it does show up. when connected to
the computer it has an exclamation point & says drivers have concluded. but wont show any files on tablet at all. to top everything off i forgot to take the sd card out before taking the back off and it broke the mount. now i got it to read it a couple times after putting paper behind the sd card.... but it hasnt always worked. someone please .help me save my memo paD??!"!
Hi XDA people,
I am trying to resurect my old TP2 Rhod210 TMOUS USA
I would like to get android up and running.
I have read the NEW guide several times and also the OLD guide.
The issue I am having is at STEP 6: When the TRI-COLOR screen comes on it then flashes the white screen for only a second while trying to install the RHODIMG.NBH file. I had to try this several times in order to see what is says on the white screen.
It says "Loading image
No image found"
I have formatted the 4GB sd to fat32 using the HP tool I got direct from hp "FULL FORMAT"
I have downloaded the RHODIMG.NBH file from this thread and also tried the file from the old Instructions wiki.
Both files read 185kb file size.
Does anyone have any idea what is going on. Is there something I missed or are these files wrong/corrupt?
Thanks for any feedback.
Just for the sake of others:
I figured out the issue.
I was using a 4gb sd card, don't know why it wont work, but I found an old 2gb card and everything worked great! I followed the "New guide" without any issue!!
aberean said:
Just for the sake of others:
I figured out the issue.
I was using a 4gb sd card, don't know why it wont work, but I found an old 2gb card and everything worked great! I followed the "New guide" without any issue!!
Click to expand...
Click to collapse
What version of Android did yo flash? I'm thinking of trying to flash Android on my TP2 as well. THanks!
I believe I used GBX_3.4.35_Full, make sure to use the latest recovery and update to the latest SPL.
W/O this you will have charging probs and may get stuck in boot loop. MAKE SURE you are fully charged before doing this and if need be charge again before making changes.