Related
Hi all,
I need some testers from all available roms for x10. From stock rom and all custom roms.
Cause there are many custom roms available and they don't use all the same recovery, it's heavy-handed to create update.zips who can used by everyone. If I count a few there are:
people with a 2.2 rom without the needed files for applying custom kernel
people with a 2.2 rom with the needed files for applying custom kernel
people with a 2.2 rom and xrecovery
people with a 2.2 rom and freexperiarecovery
and so on.
my aim is it, to have one update.zip, who works for all people, no matter if they have applied a custom kernel before or have this recovery and not those...
but i can't test all roms now, cause this would need time and nerves i haven't.
Because that, i made two update.zips:
First includes:
please test this first and if this works, flash the one with the kernel, that we know if there are problems, if they come from the recovery part or the uncompatibility between rom and kernel
chargemon file whos made for FreeXperiaRecovery
FreeXperiaRecovery
Requirements:
this zip should work on all basebands, but i generally prefer bb 2.0.52 from here with bb patch for 2.2 roms from here
Second includes:
chargemon file whos made for FreeXperiaRecovery and boots custom kernel as default
kernel folder: latest custom kernel (k006) with miniloader and splboot.ko files
FreeXperiaRecovery
wifi modules for 2.2 and 2.3 roms
Kernel k011/k012 changelog:
kernel 2.6.29.6
a lil more free ram
removed UV for 998Mhz (seems to be the cause reboots)
Fix FrameCap (Thank Z)
addded all mtd partitions (Thank Z)
volume fix
compiled with new gcc 4.4.3
changed SLAB alocator to SLOB
enabled swap support
added Tiny RCU
added UV/OC (k012)
added UC (k012.1)
FPS cap removed
fixed iptables
Requirements:
Flash the ftf bundle from the latest Cm 7 release with flashtool
Only for 2.2 roms: Basebandpatch 49 from here
Please test the update.zips on your rom (but make a backup before flashing, that you can restore anything if s.th. goes wrong) and report if it works on your rom, and don't forget to tell which rom you tested on.
before installing, make sure you comply the requirements
installation:
For users who haven't FreeXperiaRecovery yet:
first install FreeXperiaRecovery v02.zip
reboot into recovery
install latest version
now boot up system and enjoy
For users who have FreeXperiaRecovery yet:
install directly latest version
now boot up system and enjoy
Legend:
FX = FreeXperia
FXR = FreeXperiaRecovery
gb = Gingerbread
froyo = froyo
only wrote bin or xbin instead of system/bin or system/xbin
Link for first zip (only FreeXperiaRecovery):
FXR_v051.zip
Link for second zip (FreeXperiaRecovery and custom Kernel as default booted):
2.6.29.6_FX_k011+FXR_v0.0.8.2.zip
2.6.29.6_FX_k012+FXR_v0.0.9.1.zip
2.6.29.6_FX_k012.1+FXR_v0.1.0.0.zip
Install this for using the custom kernel with froyo (Thanks ! tsuyo.kou):
http://forum.xda-developers.com/showthread.php?t=1077437
mirror:
http://www.mediafire.com/freerecovery-kernel
I AM NOT RESPONSABLE IF YOU BREAK YOUR DEVICE OR DROP YOUR COFEE !
Notice:
this WILL BREAK DATA2SD and any enhancements/addon features provide by ur current ROM (thanks to DooMLoRD for the information)
All credits go to zdzihu, jerpelea, Bin4ry, Androxyde and all those involved in the FreeXperia project.
Cheers,
L
Trying it on Trips gingerbread MIUI ROM. I'll report back!
It booted, and OC works (setCPU)! Will try it for a while to test performance and battery.
Alright, the touch and animations is very smooth with this kernel. And WiFi works!
I'll use it for a while and see if it drains much battery.
EDIT: As it seems now it drains hella lot battery. :/ Even though im using the BOOST guide and screen of profile in setCPU. Will calibrate the battery a few times and see if it helps..
a1exander said:
Trying it on Trips gingerbread MIUI ROM. I'll report back!
It booted, and OC works (setCPU)! Will try it for a while to test performance and battery.
Alright, the touch and animations is very smooth with this kernel. And WiFi works!
I'll use it for a while and see if it drains much battery.
Click to expand...
Click to collapse
Is FreeXperiaRecovery working?
Downloading now
Im on J's CM7 v 16a incl k006
I know the kernel is inclu but i try urs and report back
Sent from my X10 using XDA Premium App
9Lukas5 said:
Is FreeXperiaRecovery working?
Click to expand...
Click to collapse
Havent tried, I have to go now. But i'll try it later!
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
+1
sent from my Z orignal and modded 2.2 powered c64
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
It is possible, but they don't do. So if my zip works on all roms, you can simply apply your rom how it is described in the rom thread and boot it to be sure the rom works and then flash my zip. If anyone make it that way in future, everyone would have the same recovery and you wouldn't have headache
MarylandCookie said:
Is it not possible for all dev's to use a standard recovery/chargemon?
I think that would save alot of headache and would probably be easier.
Any thoughts?
Click to expand...
Click to collapse
+100000
@OP
please mention that this WILL BREAK DATA2SD and any enhancements/addon features provide by ur current ROM
EDIT:
@OP it would be better if u can create an update.zip to take backup of current recovery and then replace it with FreeXperia recovery... also u can create another "BackToStock" update.zip to remove FreeXperia recovery and then restore original recovery...
@ALL
REQUEST:
please keep reporting ur tests in the following thread....
http://forum.xda-developers.com/showthread.php?t=1018391
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
wali01x said:
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
Click to expand...
Click to collapse
Can anyone confirm??
same thing here with wolf rom. i'm gonna try trip's gingerbread rom.
edit : i confirm it's not working on wolfbreak rom.
tested on jerpelea's v15 stock, everything works except wifi which just shows error, xrecovery works fine.
no rebooting issues.
I have however been using this all day and battery life is good.
wali01x said:
i just tested it on wolfbreak 6.1.3. v7 or 6.1 update and its a no go.. i get system forclose and once i wait it freezes system, and broke my xrecovery and also sim card doesn't work nor memory card. so again "HOUSTON" its a "NO GO"
Click to expand...
Click to collapse
works fine here... but no bootanimation
use this...
http://forum.xda-developers.com/showthread.php?p=13022717#post13022717
on trip miui gingerbreab rom : stucks on SE logo , now i need to fix the phone with seus.
Same here. Also tried with TripMiui 1.0.4 on froyo too and same tesult.
Sent from my X10i TripNMiUI using XDA App
thor2002ro said:
works fine here... but no bootanimation
use this...
http://forum.xda-developers.com/showthread.php?p=13022717#post13022717
Click to expand...
Click to collapse
thor im gonna give it a shot later on thanks..
just have WLOD while restoring apps with titanium backup on Wolfbreak cm 6.1.3 V061
pd1: bluetooth dont work
ok, s.th. strange happened to me, i flashed the same zip again (i haven't edited the file or moved renamed, nothing) but after that second flashing, my recovery was broken too and i got a lot of fc's like described from many others. Now i wanted to flash freexperiarecovery without kernel to see if the problem is there or by the kernel, but can't get the zip file to work. So, I'm going to sleep now, maybe i can't see anything important at the moment cause i'm so tierd. But thanks for testing it yet on some roms
Hi,
since I can not answer directly in the dedicated thread of "MiniCM7 v21" , I'm forced to ask here.
I finally installed today MiniCM7 v21 on my X10 mini pro, a great ROM and runs very well.
But I have a problem: I can not make my phone work with the Sony Ericsson VH110 headset rather than before, instead with the stock rom it worked fine.
I turn it on and do research, but can not find the phone (though it is put as detectable) and the phone can not find the headset, although it is turned on.
How can I do? The rest works fine, even LiveView ... just because the headset is not it?
I need! Please help me!
up
nobody knows how to help me?
up
I'm waiting for answer...help me to fix it! please!
did you ask Paul?
matthias1203 said:
did you ask Paul?
Click to expand...
Click to collapse
yes, I asked in the official thread, and I sent a private message to Paul xxx, but I had no answer.
DomusX10 said:
yes, I asked in the official thread, and I sent a private message to Paul xxx, but I had no answer.
Click to expand...
Click to collapse
Well, if it's urgent, I can only suggest You to change ROM:
http://forum.xda-developers.com/showthread.php?t=1415026
works better than MiniCM7pro, with bluetooth devices...
Cheers,
M.
mum_laris said:
Well, if it's urgent, I can only suggest You to change ROM:
http://forum.xda-developers.com/showthread.php?t=1415026
works better than MiniCM7pro, with bluetooth devices...
Cheers,
M.
Click to expand...
Click to collapse
thanks for the report ... I just put the MiniCM7 v21, unlocking the bootloader would not know do it ...
you use the rom that you've reported? what are the differences?
you mean you dont know how to unlock the bootloader?
oh, its easy. go HERE: http://forum.xda-developers.com/showthread.php?t=986692
DL > INSTALL> OPEN> connect your phone and just click unlock bootloader [i think its the unlocked lock button] and you're done
next step will be to flash kernel. download the kernel and extract it on the desktop. In flashtool, click the flash button [lightning button] > flashmode > "..." button > desktop > open
[note: you wont be able to select the ftf file, you just have to select the directory, the location of the file]
select the kernel from the select firmware window thingy, and also select BOTH the files, loader.sin AND kernel.sin and hit OK. and follow the simple instructions that follow.
BAADAAAM!
custom kernels are better, faster and have more features. Especially nAa kernel, though its not the fastest.
For now, im using android kernel by paul. Its basically the same as nAa BUT..at 800mHz even though, wifi doesnt work with it, which it does with nAa kernel.
th3discodancer said:
you mean you dont know how to unlock the bootloader?
oh, its easy. go HERE: http://forum.xda-developers.com/showthread.php?t=986692
DL > INSTALL> OPEN> connect your phone and just click unlock bootloader [i think its the unlocked lock button] and you're done
next step will be to flash kernel. download the kernel and extract it on the desktop. In flashtool, click the flash button [lightning button] > flashmode > "..." button > desktop > open
[note: you wont be able to select the ftf file, you just have to select the directory, the location of the file]
select the kernel from the select firmware window thingy, and also select BOTH the files, loader.sin AND kernel.sin and hit OK. and follow the simple instructions that follow.
BAADAAAM!
custom kernels are better, faster and have more features. Especially nAa kernel, though its not the fastest.
For now, im using android kernel by paul. Its basically the same as nAa BUT..at 800mHz even though, wifi doesnt work with it, which it does with nAa kernel.
Click to expand...
Click to collapse
I have put a "thanks" with the button ... thanks for all the explanations ... for what I understand, the modified kernel is faster, but not everything works ...
In your opinion what is the best kernel for this phone? I need the wifi .. and also bluethoot and 3g ...
For fully developed kernels, everything DOES work.
I dont think Tethering even worked with stock kernel, i dint try it honestly, so i might be mistaken.
Paul's Android kernel is NOT fully developed. As a matter of fact, there's not even a specific thread for it.
If you want CyanogenMod, then the only option you have is nAa kernel with MiniCM7.
If you want to give other ROMs a try, you can try Fa kernel[800Mhz], which works with almost all ROMs except MiniCM7 and the official cyanogenMod.
Wifi, bluetooth, 3g works. For me, atleast.
Another kernel available is the ZombiePanic kernel, best to be used with GinTonic or Flame.E/Flame.GDX.
PS; everything works in ALL the mentioned kernels EXCEPT Wifi tethering.. Which works ONLY with MiniCM7 and nAa kernel.
DomusX10 said:
thanks for the report ... I just put the MiniCM7 v21, unlocking the bootloader would not know do it ...
you use the rom that you've reported? what are the differences?
Click to expand...
Click to collapse
Of course I do.
(If You look at my sign, "mimmi" is my phone... )
I think it's really faster than Paul-xxx MINICM7 v21 (that is just faster than v20!) and bluetooth works better...
Wasn't this Your question?
Cheers,
M.
mum_laris said:
Of course I do.
(If You look at my sign, "mimmi" is my phone... )
I think it's really faster than Paul-xxx MINICM7 v21 (that is just faster than v20!) and bluetooth works better...
Wasn't this Your question?
Cheers,
M.
Click to expand...
Click to collapse
then, I have some questions for you:
- Have you tried bluethoot headset and they work with the ROM indicated?
- The accelerometer works or goes in spurts (eg when playing GT racing using the phone as a steering working?). With the compass or the bubble's level, go in spurts? because does this happen with MiniCM7 v21...accelerometer in games or app doesn't work fine..
If you tell me that these things work, I think that as soon as I have time, I'll try to flash the ROM which you have indicated...was the right time that finally all works on this phone!
sorry!
I can only answer You about bluetooth headset, I'm using.
Don't know (ever tried!), for all other Your questions.
P.S.: I'm using nAa kernel, v8. I don't know for other release'
Cheers,
M.
mum_laris said:
sorry!
I can only answer You about bluetooth headset, I'm using.
Don't know (ever tried!), for all other Your questions.
P.S.: I'm using nAa kernel, v8. I don't know for other release'
Cheers,
M.
Click to expand...
Click to collapse
ok .. in any case, the simple fact that the headset works is a good sign ...
Soon I'll try to do this ... and switch to that other ROM ... thank you again for the availability, friend!
hello first of all thanks to iiandskater for this lovely rom.i really love this rom,hence i was using cm10 for my sk17i ,after i see this rom i tried to install it on my sk17i,i followed the steps just like ur post,first i wiped all and afterwards i flashed jv 5.3 and then dev files for mango also then gapps and keyboard but afterwards i got one bug that my hardware keys are not working:crying:.so i saw from ur thread 1) first flash jv 5,3 then 2) addons 3)key board language packs 4)flashed dev for files for mango u provided and it worked for me :good: but all of the times i was not getting wifi even i downloaded the kernel that u provieded.i really appreciate your hardwork for making this rom ,hope i will get a solution and sorry for anything i mentioned here badly because its my first post:crying:
Thanks again to iiandskater for making this wonderful rom:fingers-crossed::good:
[Q] [ROM][4.2.2][ALL MDPI] JellyVanilla EX 5.3 | WIFI is not working in SK17
annadian said:
hello first of all thanks to iiandskater for this lovely rom.i really love this rom,hence i was using cm10 for my sk17i ,after i see this rom i tried to install it on my sk17i,i followed the steps just like ur post,first i wiped all and afterwards i flashed jv 5.3 and then dev files for mango also then gapps and keyboard but afterwards i got one bug that my hardware keys are not working:crying:.so i saw from ur thread 1) first flash jv 5,3 then 2) addons 3)key board language packs 4)flashed dev for files for mango u provided and it worked for me :good: but all of the times i was not getting wifi even i downloaded the kernel that u provieded.i really appreciate your hardwork for making this rom ,hope i will get a solution and sorry for anything i mentioned here badly because its my first post:crying:
Thanks again to iiandskater for making this wonderful rom:fingers-crossed::good:
Click to expand...
Click to collapse
pls anyone help me to fix this issue
annadian said:
pls anyone help me to fix this issue
Click to expand...
Click to collapse
wifi means is it wifi hotspot or just wifi
anyways many custom rom has problems with wifi so it may not work properly please contact the dev of this rom
try any 3rd party apps for using wifi that may work
its wifi not turning on, i will try to download thirdparty applications
sangalaxy said:
wifi means is it wifi hotspot or just wifi
anyways many custom rom has problems with wifi so it may not work properly please contact the dev of this rom
try any 3rd party apps for using wifi that may work
Click to expand...
Click to collapse
its wifi not turning on, i will try to download thirdparty applications and inform u here i will upload screenshots
tried wifi manger but tried wifi manger but still cant turn on wifi
annadian said:
its wifi not turning on, i will try to download thirdparty applications and inform u here i will upload screenshots
Click to expand...
Click to collapse
tried wifi manger but tried wifi manger but still cant turn on wifi:crying:
i saw mango has got bugs but is that WIFI not turning ON ?
annadian said:
tried wifi manger but tried wifi manger but still cant turn on wifi:crying:
Click to expand...
Click to collapse
i saw mango has got bugs but is that WIFI not turning ON ?hope someone can really help me to find this bug
a
and i cannot post to dev thread iam new here:crying:
annadian said:
i saw mango has got bugs but is that WIFI not turning ON ?hope someone can really help me to find this bug
a
and i cannot post to dev thread iam new here:crying:
Click to expand...
Click to collapse
check on dev thread may be someone already reported this issue and may be they got solved
so check the original thread
anyway thanks for ur reply
sangalaxy said:
check on dev thread may be someone already reported this issue and may be they got solved
so check the original thread
Click to expand...
Click to collapse
thanks for ur responce
i saw it in the dev forum also but with other device and in that one they said to flash the proper kernel for getting wifi.
and iam using the exact kernel mentioned by dev itself
hope there will be other solutions out there
waiting for it anyway thanks
annadian said:
thanks for ur responce
i saw it in the dev forum also but with other device and in that one they said to flash the proper kernel for getting wifi.
and iam using the exact kernel mentioned by dev itself
hope there will be other solutions out there
waiting for it anyway thanks
Click to expand...
Click to collapse
try any other kernel or your stock kernel may be it will work
ya i tried
sangalaxy said:
try any other kernel or your stock kernel may be it will work
Click to expand...
Click to collapse
yes i tried lupus kernel because it was working fine with my cm 10 and also NAA kernel and also mikes+naa kernel and also stock kernel
but all failed some wont boot up and some will work except wifi
:crying:
i think iam thinking to go back to cm or try LX cm10.2 for my sk17i
wil wait for few hours though
anyway thanks for ur suggestion
i tried everything in the dev forum but
annadian said:
yes i tried lupus kernel because it was working fine with my cm 10 and also NAA kernel and also mikes+naa kernel and also stock kernel
but all failed some wont boot up and some will work except wifi
:crying:
i think iam thinking to go back to cm or try LX cm10.2 for my sk17i
wil wait for few hours though
anyway thanks for ur suggestion
Click to expand...
Click to collapse
i tried everthing in the dev forum
but none work for me
anyway i really love this rom
maybe after few weeks all the issues will be solved and hope i can try this rom again,,
now im on legacy xperias cm10.2
it works great for me even with wifi
waiting to see dev to find and help me to solve this issue
finally i was able to get my WIFI working in my sk17i
:laugh::good:
annadian said:
i tried everthing in the dev forum
but none work for me
anyway i really love this rom
maybe after few weeks all the issues will be solved and hope i can try this rom again,,
now im on legacy xperias cm10.2
it works great for me even with wifi
waiting to see dev to find and help me to solve this issue
Click to expand...
Click to collapse
:laugh::good:
finally WIFI is working fine in my sk17i with jellyvanilla 5.3
i installed fxps cm10.2
and i thought of trying jv again
so i first flashed kernel provided in the zip
and then
done full wipe
system,cache,and system format
:good:
then installed jv from recovery
but first i was not able to boot in to recovery but afterwards i installed xparts from the market and then clicked boot in to recovery from that
but again i wasnt able to boot in to recovery then i saw post from devs forum it happens due to minor bug in fxps kernel so after clicking boot in to recovery just need to press menu button once and it worked perfect for me
:good:
and i flashed light gapps and xperia keyboard and booted again
and my wifi was working perfectly in my sk17i
but only one issue is my hardware keyboard is not working
so i flashed the dev files for mango too
and now my hardware keyboard also working and thanks iiandskater for this perfect rom for my sk17i
keep up the good work
hope i can get this rom for my st16i
jlo too
thanks
really love ur work
thanks all the dev here and all my fellow members and friends out here
enjoy:laugh::victory:
which kernel do you flsh?
plizz help... wifi on my SK17i not working too
thnx be4
Hello there
Here is the the CM11 made for X10
Still be in alpha 1 as not everything's working
Nearly same bugs as Evervolv 4.4.2 as bugs are due to kernel
Recovery access is working, sdcard mount only in recovery .
To download the ftf file it's here
To enter recovery mod :
wait the 2nd vibration
tap the screen
Don't forget to check "no final verification" in flashtool
Sources are available here on github
Only for unlocked bootloader device
First boot can be long, but cpu frequency is 998 so no problem with oc
Credits : CM Team, FXP for initial repo (tell me if I forgot someone
Good job.
"Envoyé depuis mon C6903 avec Tapatalk"
Tof37, you're the best!
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
FeraVolt said:
Thanks How about 2.6 kernel? It will act better definetly.. Wish to see what kitkat could realy do on x10..
Thanks a lot
Click to expand...
Click to collapse
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
as you can see the SurfaceFlinger is the problem ..
W/SurfaceFlinger( 1182): getting VSYNC period from fb HAL: 6535947
W/SurfaceFlinger( 1182): no suitable EGLConfig found, trying a simpler query
F/SurfaceFlinger( 1182): no suitable EGLConfig found, giving up
F/libc ( 1182): Fatal signal 6 (SIGABRT) at 0x0000049e (code=-6), thread 1182 (surfaceflinger)
chack your sources..
Tof37 said:
Building with an "old good" 2.6.29 for now ... if it's ok it'll be the v1 for cm11 and evervolv's rom
:fingers-crossed:
@FeraVolt
I need your egl files !!! would you send me them please ? I can't remember where they are not good to be old...
EDIT : Found them ... rom is booting but no display ; see log
Click to expand...
Click to collapse
Thanks dude.. I know my kernel boots but without display.. I said that graphical part needed to be updated to work on 4.x roms since current kernel setup is very "mutant" (GB KGSL - new FB - Tripple Buffering - 32bpp & many many more things..). You may just try to replace whole KGSL and Video/MSM folders with board config & misc updates from scritch v21 kernel.. we will loose 32bpp.. but i think it will be enough... one more thing.. I didn't updated msm_mdp.h it's old. because new verion starves double more PMEM than default and returns black & white camera.. so my video folder is tuned that way.. So i believe it's totally kernel fault.. BUT this setup works perfectly on GB. Maybe you realy can bypass/modify current surfaceflinger.. since current kernel setup is that what i realy want to see in 4.x roms.. I belive that there we will have HW video recording working super fine..
Also I wish to advice you LegacyXperia CM11 sources.. This project is created to be close as much as possible to original CM11 development but is optimized for legacy xperia devices (2011)(things like default browser..torch..data..etc).. Thank you very much...
Boots without problems.
Attached the following dmesg log.
If there's something you're looking for in specific let us know.
Thank you for your ongoing hard work.
Finally got sdcard mount and ums working... will update device tree later .
Got boot with an "old" 2.6.29 kernel.
Have to fix wifi and bt now....
Sent from my XT890 using xda app-developers app
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Hzu said:
Maybe this is just me, or does anyone also have their sdcard almost wiped out while using this ROM? I'm not sure what caused it, but all that I know is that a lot of my files are missing ever since I booted into this ROM. I remember wiping the data with the recovery from this kernel, but again, I am not sure if that is the cause of it. If not, it might be something else that I did before that, that is why I need to know if anyone else experienced the same thing as me.
I'm not expecting anything from a pre-alpha build, but the fact that it boots and we have a hope alone fascinates me.
Click to expand...
Click to collapse
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Tof37 said:
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom booted fine, and when I returned to feras v37 everything was ok.
Click to expand...
Click to collapse
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Tof37 said:
Strange issue ... didn't noticed that ...
As sdcard was only recognised and mounted in recovery + you may have app installed on your sd, wiping data should be the cause.
Can't be rom installation cause sd is not mounted / recognized in user land.
As Hzu asked, did someone else had this issue ?
Click to expand...
Click to collapse
Kornelije23 said:
No it must have been something in his phone, i did not have any problems, rom buted fine, and when i returned to feras v37 everything was ok.
Click to expand...
Click to collapse
kamalyaadav said:
I also do not have any problem with this ROM. Some thing is wrong with him..................................
Click to expand...
Click to collapse
Dr Goodvibes said:
Same here, but I returned to Tof37 GB 2.3 X10S v9 ROM
CWM recovery and all fine.
Click to expand...
Click to collapse
I see, thank you for your responses. Something must have happened before I flashed the ROM. Well, a lot of things happened, but I'm glad it's not this ROM that caused it.
Kornelije23 said:
How good is that room compaired to feras v37, i have tried x10s v9 a long time ago, so is it worth trying it again ?
Click to expand...
Click to collapse
um since this alpha alot of things dont work like the wifi/camera/audio/bluetooth/many applications.......and as such is not suited for daily use but its snappy and for a alpha is quite stable .
Any progress bro ????????
or we should forget about this rom, because this is too much wait.
Can someone tell what work/doesn't work, wifi work?
Adigo18 said:
Can someone tell what work/doesn't work, wifi work?
Click to expand...
Click to collapse
Well ...
As wrote in op the rom boots, calls sms mms seem to work but wifi not ...
No camera and many other things don't work.
Since may didn't made any progress with kernel / kitkat based rom due to personnal reasons.
However, this project is not stopped, just can't when I'll be able to do work on it ... sorry
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Hi eXperts,
last month I flashed the great Ultimate HD rom, so stable and now my wonderful Xperia pro is much faster
Before to do that anyway I used Mount2SD app to get my external sd mounted and solve, in this way,
common issue about "memory unavailable" and similars when I tried to add or update an app.
Now , Mount2SD is no more working, with no log entries, even if detailed debug verbose is enabled; first
I was thinking there is issue with Init.d support... But it sounds strange because before UHD I used the original stock rom by sony,
rooted of course, and furthermore I checked with a tool (embedded inside universal Init.d) and it shows me that Init.d support
is green and working....
So, looking beyond, my question is how to definitively solve this issue, changing kernel or something else
and give my phone support to mounting external sd native. Which kernel may I flash ? Working together with UHD?
Fast?
My phone is mk16i and must keep physical keyboard working, cwm, rooted.
Will this operation break my current configuration in terms of installed apps and so on?
My Xperia pro is unlocked bootloader.
Thank you very much in advance!!
Click to expand...
Click to collapse
XperiaPro55 said:
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Click to expand...
Click to collapse
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
XperiaPro55 said:
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
Click to expand...
Click to collapse
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Grof87 said:
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Click to expand...
Click to collapse
Hi Grof,
flashing stock GB/ICS does not help. I use stock kernel since the beginning... and no stock kernel
is able to mount sd-ext file system in order to use sd as a natural extension of internal memory.
As I wrote in the beginning I already reached out result I want, using Mount2Sd with stock kernel but now
I want to solve with a new full featured and modded kernel that embeds useful functionality just like CWM and
of course internal memory extension using sd-ext filesystem..
That's the point.
My sd card is perfect, nothing to complain and working like a charm! I "only" need the first part.
Regards
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Grof87 said:
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Click to expand...
Click to collapse
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
XperiaPro55 said:
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
Click to expand...
Click to collapse
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Grof87 said:
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Click to expand...
Click to collapse
Hi, I know the rules.
I am asking if you can help me understand which ROM is ready for UHD cause, of course, I already read the post and found
different suggestions but regarding other models. That's the point, because Xperia Pro is a particular phone with physical keyboard for e.g.
and also looking at different kernels inside its dedicated thread I was not able to understand which kernel is already developed
and patched on ICS and there is features matrix.
Finally I need to know if, installing selected kernel, I will loose something or not
I am not interested and I am not asking "which is the best rom for my phone ?"
Bye