Is there a case with adjustable stand for the transformer?
Like the xoom custom fit folio and the viewsonic g tab clip case?
Sent from my SCH-I500 using Tapatalk
There's only one case made for the TF:
http://www.newegg.com/Product/Product.aspx?Item=N82E16834991481&cm_re=tf101-_-34-991-481-_-Product
They are Developing the folio case(Multi-angle adjustable
) now.. Keep you eye.I think need 7-10days..
The Asus TF sleeve has 2 angles, high and low. It's not as sturdy as the folio (no plastic), but it works.
Related
HP WV594AA 10.2" neoprene sleeve originally for an HP Mini
Just picked up one of these today off the shelf at Best Buy and it fits my Transformer Prime + keyboard dock like a dream. Snug but not overly tight. The front pouch is also nice to carry extra tidbits. I like to store the tablet attached to the dock but some of the other sleeves were a little too tight. This one is perfect and the zipper closes smoothly without too much extra wiggle room.
Amazon link will be added soon when I am able to post outside links per XDA rules.
Just thought I would let everyone know in case they need a relatively cheap high-quality sleeve.
I also picked this case up yesterday and as the OP states, it's a great little case for the prime/dock. Amazon link provided below and you save 9 dollars ordering from amazon than from picking it up at Best Buy. Of course... then there is shipping.
www.amazon.com/s/ref=nb_sb_noss?url...ds=HP+WV594AA+10.2"+neoprene+sleeve+&x=25&y=6
I've been using my 7" Acer one sleeve for mine.
It is a great sleeve for the TF201, but it stretches out and doesn't fit very well after a couple months of use.
Does anyone know of a good fitting sleeve that has a handle on it? I think the reason my HP sleeve has stretched is because I carry it around under my arm quite a bit.
BUILT makes a sleeve pouch that's called the envelope. It has a main pouch that fits the tablet and keyboard perfectly and also has a front pocket for your accessories. I've been using it for several months now and enjoy it. They also make a version with an over shoulder strap. Both are for sale on Amazon last I checked.
Edit. Its made from Hugh quality neoprene wet suit grade material. Quite stretchy!
Sent from my DROID RAZR using Forum Runner
I'm kinda liking this one because of the shoulder strap and the clear front. Since I wouldn't use it near water, I wish they had a similar one made from leather or neopreme.
http://www.transformerforums.com/forum/transformer-prime-accessories/22633-slim-shoulder-strap-bag-just-prime.html
Bob
There are a lot of cases out there now and more keep coming. I've bought just about every one I've seen. My favorite of course is the Caseen skinny but I also like the Moko. There are about 3 or 4 different Moko models cases out there but I wanted to specifically point this one out. While most cases don't even provide speaker holes this one does. It is a nice one.
http://www.amazon.com/MoKo-GENUINE-...8?s=electronics&ie=UTF8&qid=1329357292&sr=1-8
I have nearly the same case. Mine is the MiniSuit 360 degree "swivel" view, the tablet and surrounding case can snap off if you just want to have it in your lap, and it has a little strap if you want to secure the folio closed. I really like these styles in general, they are all very similar. I didn't think mine would have speaker holes but some of these pictures don't show that there is cut out on the side (v. Perforated holes)
I recently received this case after having been sent a similar one that was meant for the TF Prime. While not yet generally available, the Dual-Axis was a nice step up for a couple more dollars. All the ports are very much available including the earjack. The cutout on the cover for the camera is still insufficient in my opinion. This could because the thickness of the sleeve makes it a bit distant from the cover and even though aligned, I think the camera lens has more of a wide angle and still picks up the edge of the outer cover. Not a big deal as you can remove the inner sleeve as it is held by velcro and take a photo that way and then put it back in the leather cover.
The whole case feels sturdy and thick and the leather is nice. It also has magnets in the flap to keep it secure. None of the tablet sticks out so I feel confident if I drop it that the tablet inside would come to no harm.
The positions available from the ridges on the inside cover really work well.
One other drawback is the outside cover had no cutout for the speaker though the inner sleeve does. So basically you do have to extend out the sleeve to avoid muffling the sound. However, I have a pair of earphones and with the jack fully exposed that is not much of an issue.
In summary, while this case has a couple of shortcomings, they can be worked around easily enough and in whole I really enjoy this case. Kudos to PC Micro Store on Amazon for sending me this new case in exchange for the one that was for the Prime.
It says on the description that all open ports are available, does that mean you can use the keyboard dock with this?
Sent from my ASUS Transformer Pad TF300T using xda premium
I don't own the keyboard but the bottom of the detachable sleeve has the charging port and the two keyboard attachment slots exposed but not sure that it will still work with the sleeve installed.
If the case still goes around the bottom at all then not likely it will not work as the tablet goes down into the dock quite a bit.
Sent from my ASUS Transformer Pad TF300T using xda premium
What is the thinnest folding case available
I am looking for a case for the 300 that is as thin as possible. I really only care about scratch protection, I don't expect it to protect from drops (not that most case will provide that protection anyways). I do need it to have a stand function to watch movies. Since this is already thicker than prime I want to minimize that as much as possible.
Even the cheapie vinyl thin case that came bundled with the Acer a500 at costco would be fine. It was very thin.
The case I have for my ipad2 is tapered at the edges to keep the profile as thin as possible instead of being just squared off at the side edges. In other words, it should wrap around the side edges like a glove.
i just ordered the MOKO slim fit case from amazon. I hope this caters to your needs. it's slim and tough enough to even withstand drops.
Sent from my ASUS Transformer Pad TF300T using XDA
mickey878 said:
i just ordered the MOKO slim fit case from amazon. I hope this caters to your needs. it's slim and tough enough to even withstand drops.
Sent from my ASUS Transformer Pad TF300T using XDA
Click to expand...
Click to collapse
decent but not quite what I am looking for. The case you are talking about clips or hooks onto the tablet in about4 to 6 areas (4 corners plus maybe 2 additional top and bottom). It leaves alot of the edge exposed. On th eplus side it is usually a hard back case so decent protetion.
However, what I had in mind is a case that slips all around the edges of the tablet. Most cases are designed like this but except what I have in mind would be slimmer with the edges tapered to match the edge of the tablet but still wrapping the entire tablet (except at the ports). Hard to tell, but I think this case fits that description but it is for tf101 only:
http://www.amazon.com/rooCASE-Leath...9?s=electronics&ie=UTF8&qid=1337799671&sr=1-9
Honestly? I am still waiting for something the like the shell+smartcover that my mom's Ipad has. That really is brilliant stuf.
For now I found this to be the thinnest sleeve/cover/whatever
Urbanflip series on HandiHeldItems
I have one and had to adjust the hole for the headphone jack.
But it works pretty good, is a lot thinner that some other case I bought and has a cut out for the charger.
But an Ipad-like smartcover .. to me that's the bomb
WOEHAA said:
For now I found this to be the thinnest sleeve/cover/whatever
Urbanflip series on HandiHeldItems
Click to expand...
Click to collapse
Wow, that's almost exactly what I'm looking for - just with the ability to use it with the dock! They have this one on their site that does just that:
HHI Keyboard Case with Slim Portfolio Stand Cover for Asus Transformer Pad TF300
I have a carbon fiber leather case for my Galaxy Tab 10.1 and won't buy another case unless it's the same material, it looks so slick and resists scratches and hides dirt like no other case. Since getting it, I've taken out the tablet probably 3 times!
Good find!
KryptosXLayer2 said:
Wow, that's almost exactly what I'm looking for - just with the ability to use it with the dock! They have this one on their site that does just that:
HHI Keyboard Case with Slim Portfolio Stand Cover for Asus Transformer Pad TF300
I have a carbon fiber leather case for my Galaxy Tab 10.1 and won't buy another case unless it's the same material, it looks so slick and resists scratches and hides dirt like no other case. Since getting it, I've taken out the tablet probably 3 times!
Good find!
Click to expand...
Click to collapse
These are nice! To bad the carbon fiber one won't be out until June 18!
From my long awaited and totally worth it EVO LTE!
All 3 of these are pretty much the same and is the thinnest case out in the market:
http://www.amazon.com/MiniSuit-Tran...U7SW/ref=sr_1_4?ie=UTF8&qid=1338346700&sr=8-4
http://www.amazon.com/Poetic-HardBa...ZERO/ref=sr_1_1?ie=UTF8&qid=1338346673&sr=8-1
http://www.amazon.com/MoKo-Slim-Fit...57RI/ref=sr_1_8?ie=UTF8&qid=1338346673&sr=8-8
I found what I was looking for but unfrtunately it is only for TF101
http://www.amazon.com/rooCASE-Leath...8517&sr=8-1&keywords=roocase+tf101+tf300+slim
I also found a similar case on Ebay but it looks slitghtly cheap. I wish it wasn't microsuede:
http://www.ebay.com/itm/ASUS-Transf...?pt=US_Tablet_Accessories&hash=item3cc88b0bbc
This case is also very thin but I can't find it anywhere outside of the wholesale site:
http://www.alibaba.com/product-gs/595097536/SiKai_Ultra_slim_Leather_Case_for.html
"rooCASE Ultra Slim (Black) Leather Case Cover Cover with Stand for Asus Eee Pad Transformer 10.1-Inch TF101 Android Tablet Wi-Fi
(NOT Compatible with PRIME TF201 and TF300)"
$8.99 with Amazon Prime shipping!!
http://www.amazon.com/rooCASE-Leath...3775&sr=8-4&keywords=asus+transformer+roocase
Sent from my SPH-D710 using Tapatalk 2
Have One, Love It
I've had the roocase for 6 months now, and I have to tell you I love it. If you're primary concern is protection, is is superb. The inner sleeve (that the tablet actually fits into) makes it super easy to hold on to. Put it in the main case, prop it up for easy hands free reading or watching a movie.
Just thought I'd share my opinion. These cases used to be really expensive. I'm at work, and they have Amazon blocked so I can't see if it's exactly the same case, but mine is leather. Has zippered outer case, and sleeve that fits inside.
Frank
fbales said:
I've had the roocase for 6 months now, and I have to tell you I love it. If you're primary concern is protection, is is superb. The inner sleeve (that the tablet actually fits into) makes it super easy to hold on to. Put it in the main case, prop it up for easy hands free reading or watching a movie.
Just thought I'd share my opinion. These cases used to be really expensive. I'm at work, and they have Amazon blocked so I can't see if it's exactly the same case, but mine is leather. Has zippered outer case, and sleeve that fits inside.
Frank
Click to expand...
Click to collapse
Will this case fit into the keyboard dock?
thanks!
pyro224 said:
Will this case fit into the keyboard dock?
thanks!
Click to expand...
Click to collapse
no.
Glad I didn't buy it back when I bought the tablet now. Can't beat that price!