Hopefully this is in the right place, but I cannot put it in a specific area since I am new to the forums. THANKS ALL!
HELP…
I need to enter my MSL to “fix” the SiriusXM app (or other streaming apps). Before I was able to use the instructions below. With this new rom (I am thinking any 2.3, but I am running Fresh EVO 2.3.3) , it takes the code, but nothing comes up. Does anyone have a work around???
1) Dial ##3282#
2) Choose Edit Mode
3) Enter MSL
4) Choose Advanced
5) Change HTTP PD Proxy Port to: 0 (old 8085)
6) Change HTTP PD Proxy Address to: 0.0.0.0 (old pd.vog.sprintpcs.com)
Same problem here. I've been looking for an alternate, but I haven't seen anything yet. Any one had any success getting into the MSL menu with 2.3???
Reading Msl
I saw the method for reading msl code via cdma workshop but the pics showed cdma ws 3.5 and i have 2.7 will that proccess still work
u can get the msl from programs like dfs tools cdma workshop and qpst as well as msl reader from the market but i always find it easier calling your carrier and telling them you want to do a data restore or something like that.
as for it not recognizing the ##codes the person who made the rom couldve taken the epst apk in order to save room.
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
llcobbs said:
Ok, I opened chat to sprint support and asked for msl code. They told me that my device doesn't have MSL but then gave me what they called a 6 digit security code to reprgram my phone. Is this security code the MSL and they just didn't want to tell me.
Click to expand...
Click to collapse
yea thats probably it.
also, for anyone stuck in a 2.3 rom, try these codes
*#*#3282#*#* Data Restore
*#*#786#*#* Reverse Logistics Support (device wipe)
*#*#(your msl)#*#* reprogram phone # and msid
these are the codes we use at my store for the nexus s 4g. hope it helps
I have an issue. I have my msl and enter it. Using getprop (ril.MSL 123456) then use *#*#3282#*#* enter the msl. Always get invalid code. Using the number given to me by getprop.
Would being unrooted cause this?
Sent from my Nexus S 4G using XDA Premium App
Now it doesn't say invalid anymore after reboot. Now it just exits back out to menu to select what data setting I want to edit. I select wimax and it asks for msl again.type it back out to the menu I go.
Any suggestions?
Sent from my Nexus S 4G using XDA Premium App
hello any answers
Someone please read this!
Sent from my Nexus S 4G using xda premium
Related
FIRST OF ALL.. ALL CREDIT GOES TO MYCRICKETFORUM. One of the best tutorials I have ever seen, especially for beginners.
Full Flash Sprint HTC Evo 3D to Cricket: Talk, Text, MMS, Internet
This is a revolutionary phone and hopefully some we see some of it's technology in other phones.
At this moment there is no 4G with Cricket. They have already made moves to establish a partnership and have an LTE network. It has been rumored that Sprint is even trying to move away from the Clear 4g network (WiMAX). This means that you will have no 4G service when you flash this phone. I believe the radio gets it's authentication by MAC address so it might be possible to put this on a Clear account. One of my customers said he was able to do this with his Epic that I flashed. He was also a Clear reseller.
Until we get permanent root, this tutorial will just cover putting the device on the $55 Android plan.
Let it be known that sometimes Cricket says they have put you on the $55 Android plan, but they put you on the All in 55 Plan (5m5). This is not where you want to be. You're paying 10 more bucks a month for absolutely nothing over the 45 dollar plan.
We offer plan change for free to forum members. Just use the contact us link at the very bottom of this page. Supporting members of the forum receive additional benefits such as free ESN changes on your account. No more paying $15 everytime you change phones. To become a Supporting Member, just go to the settings up top and find Paid Subscriptions on the left hand side. Choose a membership level of your liking. Also use the contact us form for any modifications you need made to your account or additional help.
Anyways moving right along. We'll establish the items that you will need. This is usually similar across the board.
NOTE: At the very end we'll include some wireless tethering instructions.
A. QPST (QPST Version 2.7 Build 355)
http://www.mycricketforum.com/flash...amming/5372-qpst-version-2-7-build-355-a.html
B. HTC Diagnostic drivers for the Evo (attached on this thread [32 and 64 bit])
C A Windows PC with either Win7, XP or Vista plus your Evo 3D with a USB cord.
D. PRL (*STICKY* Official Cricket PRL Thread)
http://www.mycricketforum.com/flash...041-*sticky*-official-cricket-prl-thread.html
E. CDMA workshop (google) OR CDMA Workshop 2.7 Download) to get the MSL (aka SPC) if you don't know it already. Alternative would be MSL reader from the Market or attached below.
http://www.mycricketforum.com/flashing-tools-files-programming/44-cdma-workshop-2-7-download.html
F. OPTIONAL: Android SDK which includes ADB drivers. (Android SDK | Android Developers)
http://developer.android.com/sdk/index.html
Please watch the videos and use the tutorial here. It helps to use both.
VIDEO #1: http://www.youtube.com/watch?v=TnFBkaIP7MI&feature=player_embedded#at=694
VIDEO #2: http://www.youtube.com/watch?v=6NpavnahHYs&feature=related
SPC/MSL Obtaining
Skip through all these screens on the EVO 3D until you are at the home screen. Go into the phone dialer and hit ##3424#. You might have to hit talk after this. It'll cause the phone to go into DIAG mode. You'll see the device on your computer. Use the diagnostic drivers (specify their specific location) to complete the install.
Now you can find your MSL using CDMA Workshop.
For CDMA Workshop, the port number has to be fairly low. I think we're talking about under 30. You'll see when you start it though. Look at your device manager to figure out the port that it's on. Select that port and then hit connect. Go over to the security tab and for SPC hit read. It'll give you your MSL/SPC. The best thing to do here is to use the SPC button then SEND command to send this number back to the phone and unlock it. Then type in 000000 or some number that's easy to remember. Hit the SPC button and WRITE. Now the MSL/SPC is 000000 or whatever you typed. This is all you need to do with CDMA Workshop.
Programming
This is the point where you will be using QPST. Use this tutorial to setup the EVO correctly. Note that the mobile IP behavior must be Simp or you will get errors on your Evo from time to time.
Ignore any NV read errors you get when writing to the phone.
( http://www.mycricketforum.com/flash...-*sticky*-qpst-tutorial-pictures-cricket.html)
Once you get done with this part, talk and text will work. If you are on the $55 Android the Internet should work. However...
Working with new devices (never activated)
If you watched the video, between part 1 and 2 we have a little change in plan here. This was due to the fact that our device was brand new and never activated. The hands free activation kept on popping up, and we don't believe the device had accepted all of the programming at that time. Our hunt led is to Sprint's website.
Dial ##(and your SPC, we set it to 000000)#. This will open up the EPST menu. Click edit mode. Put in the proper Mobile Directory number (your phone number) and the MSID (your MIN). Hit the menu button and then select commit modifications. The phone will reboot.
Once the phone has rebooted, go to the dialer again and hit ##data#. Click edit mode and enter your SPC for access. Make sure the settings look like it does below:
Active Profile: 1
User Name: [email protected] (put your phone number in this)
Reverse Tunnel Preferred: Enable
Home IP Address: 0.0.0.0
Primary Home Agent: 0.0.0.0
Second Home Agent: 0.0.0.0
HA Shared Secret: cricket
AAA Shared Secret: cricket
You can try hitting menu and commit modifications, but it will most likely tell you there were no changes made. Back out, go to advanced and then continue with the multimedia streaming setup below.
Media Streaming
Youtube videos might not play unless you modify some settings. Sprint by default routes media through their servers. To change this dial ##data# from the dialer on the Evo. You will get to the EPST settings. Click edit and then enter the MSL. It will prompt you for a password which is the MSL aka SPC.
Once you get past that, go to advanced > RTSP Proxy Address (for stock Gingerbread it's advanced > RTSP/HTTP Setting > RTSP Proxy Port). Make this 0.0.0.0. Also make the HTTP PD Proxy Address 0.0.0.0. Also change the ports for both of these to 0. Back out and you should be good.
MMS
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns>
<apn name="Production" numeric="310012" mcc="310" mnc="012" apn="1" user="your10digit#[email protected]" server="wap.mycricket.com" password="cricket" proxy="null" port="null" mmsproxy="null" mmsport="8080" mmsprotocol="2.0" mmsc="http://mms.mycricket.com/servlets/mms" type="mms" />
</apns>
Just edit the "your10digit#here" part with your phone number and save this.
Place it on your phone's SDCard under a folder called "apnbackuprestore". Then open the Android App APN Backup and Restore (included in this thread and on the Market) on your Evo. Backup the stock settings. Then delete APNs and restore the new APNs you just created.
You should have everything working now. Talk, text, MMS, and Internet. There are a few more steps left to enhance the experience. Below is my attempt to fix a step that I left out.
YOU HAVE COMPLETE THE FULL FLASHING TO CRICKET. ENJOY!
Issues:
TEXT: It is possible that your text messages will come in with the wrong time. If this is the case, you can download SMS Time Fix from the Market and set it up however you prefer.
HTC DIAG DRIVERS:
http://www.mycricketforum.com/attac...ket-talk-text-mms-internet-htcdiagdrivers.zip
APNBACKUPRESTORE:
http://www.mycricketforum.com/attac...t-talk-text-mms-internet-apnbackuprestore.apk
although this is helpful i am moving mine to boost but i get WS to scan any readable addresses ? please advise thanks
I see no contact us link at the bottom of your post. Also who are you affiliated with/ business. Just wondering I saw "We offer plan change free to forum members" Thanks
EDIT: Thanks. I also fixed the grammar around the first statement. Someone suggested a change in the original wording... I modified part of the sentence and forgot to look at the rest.
ta!
Thanks for this, I will be using it to flash a 3d later. I'm also going to join the other forum to check some info on a few other phones I'm flashing.
I'll let you know if anything comes up.
A question as well, I know that with the Evo 4g Sprint removed the stock voicemail notification service as they used their "visual" voicemail app, is the Evo 3d set up the same way?
Unfortunately the Evo 3D is also. You can try Voicemail Notifier (extorian) and see if that works. I posted a download in my forum.
For some reason they removed it from the Market. Maybe it won't work. Not sure. I've forwarded my voicemail to Google Voice so I have a type of Visual Voicemail now.
When I flashed my OG evo over to cricket, sometimes the stock browser and dolphin did not work. When this happened, I used opera..only when cricket services for data where not working with them and always connected. So if you cricket guys get these same type of random not working..have it loaded on your phone as a backup browser.
hey what if the phone got flashed back to sprints latest 2.3.5 stock firmware from cricket but the msl code was never put back instead its still 000000, i want to take the phone in for service the s is on and the phone is not rooted, my usb port is broken so i cannot root my device or turn s off or diag mode for cdmaWS. Will sprints repair look at this as a sign of voided warranty beacuse the msl code is now 000000, is there anything else i can do?
No4g4Me said:
hey what if the phone got flashed back to sprints latest 2.3.5 stock firmware from cricket but the msl code was never put back instead its still 000000, i want to take the phone in for service the s is on and the phone is not rooted, my usb port is broken so i cannot root my device or turn s off or diag mode for cdmaWS. Will sprints repair look at this as a sign of voided warranty beacuse the msl code is now 000000, is there anything else i can do?
Click to expand...
Click to collapse
Most likely yes they will look at both as voiding the warranty. Technically any modification done on the phone will void the warranty.
how do i get the free plan change???
can i get my phone put on 55 android plan plz have no 3g on my phlashed phone its a sprint evo 3d to cricket
dial ##786#, then press menu and then reset it will reset the whole phone also will restore your msl
Spc problem
Im trying to get my evo 3d spc, but the method this guys is using in the video is not working. Im using 01f2030f5f678ff9 as password and is telling me "Password is correct Phone is unlocked. But it doesnt show me any spc on spc box.
Can anybody tell me how?
Alright as much as I love a poll on a tutorial I made that originally didn't include a source, here's the entire forum on flashing the 3d.
http://www.cricketusers.com/sprint-htc-evo-3d/
I don't know why you are sending anything to get the spc. All you have to do is connect and then read the spc from the security tab.
im doing that but nothing happend it doesnt show me the spc. im using radio 2.17... Radio matter in this case?
Ah... One of my phone flashers notified me of this problem. I'll reply here and in your thread over there...
http://www.cricketusers.com/sprint-...ull-flash-cricket-talk-text-internet-mms.html
Try this SPC method from this tutorial.
Good luck.
chrisngrod said:
Ah... One of my phone flashers notified me of this problem. I'll reply here and in your thread over there...
http://www.cricketusers.com/sprint-...ull-flash-cricket-talk-text-internet-mms.html
Try this SPC method from this tutorial.
Good luck.
Click to expand...
Click to collapse
Danmm Dude thanks a lot you save my day.
Does anyone know how you can get it to work on the 25 or 35 dollar plan? I think the 25dollar plan would be better because I only need 300 minutes.
Is there a need for a "donor" phone, or an already active account with cricket to get the 3vo to work? Cuz trying to open new account, I was told my phone couldn't be activated with cricket...
sent from my nocturnaled Ice Cream Sandwich
powduh09 said:
Is there a need for a "donor" phone, or an already active account with cricket to get the 3vo to work? Cuz trying to open new account, I was told my phone couldn't be activated with cricket...
sent from my nocturnaled Ice Cream Sandwich
Click to expand...
Click to collapse
Can anyone answer this?
Also is getting the 25/35 dollar plan just a scam? No one wants to answer questions about it.
I have a 3vo flashed to metro and I'm having trouble getting it to connect to 3g. The place that flashed the phone did not repair the meid. But I'm not sure if they wrote a esn from a non 3g phone to mine when they houdinied it. When I read the nv items on qxdm the esn shows up but the checksum and eveywhere else is zeroed out. Di those need to match? Anyone familiar with this process please help I'm in a 3g area but cannot connect. And this 1x ia killing me. I just paid my bill and don't wanna go to boost if I don't have to. Thanks in advance
Shot from my Shoot3Rvo
Disclaimer, I'm not an expert and I have only done a handful of clones and conversions to other networks.
First does your phone make calls? If so meid/esn are ok. Since you have 1x that also shows your meid/esn are ok too.
You don't have 3G because they didn't enter the server information correctly or your HA Password or AAA pasword are wrong. Take the phone back and have them figure it out. I've always done it with a donor phone that worked completely on the network and I just copied over all the information with qpst or cdmaws to the new phone. Newer phones hide the HA and AAA passwords so using qpst/cdmaws cant retrieve them. If the donor phone is an android phone your can get the passwords using adb, logcat and go into ##data# and access the HA/aaa fields and the go back and search logcat for the passwords.
Start searching forums for retrieving HA/AAA passwords for the EVO 3D and also general activating on Boost/Cricket process. The process would be the same except with Metro you may not have to repair meid because their is houdini to insert the meid into the database. Find out what the programming settings are supposed to be and check them with qpst/service programming or go into ##data# check them there.
Good luck and happy reading.
Sweet thanks the the best feedback that I have recieved. The way the guides show is that for metro that the ha and spi are supposed to be the msl code but I have tried that among others. So maybe I need to be using the msl code that was used for the phone they houdini with. I don't know to much about using qxdm but the areas I do scan for meid and esn are all zeros or 0xFFFFFFF is that normal.
Shot from my Shoot3Rvo
I had my evo 4g on Straight Talk, so I knew how to do it but the rezound is different because it has two ports.
I copied all the information from my evo 4g to rezound because I was not able to *228 activate like with the evo 4g. ( I have two phone now with the same esn number on straight talk, I keep the evo turned off with battery out.)
* you will not be able to *228, so you have to manually put in the settings.
What you need:
* CDMA Straight Talk donor phone & service plan (phone model ends in C for CDMA), and a 30-day unlimited service plan. For example, you can get the LG 220C for $50 with a 30-day plan, makes the phone cost just $5 bucks http://www.walmart.com/ip/Straight-T...ished/17113676 Never turn this phone on or put the battery in it. You just need the red card with the esn number on it.
HTC Sync to install drivers (after you have drivers you can uninstall):
http://www.htc.com/us/support/htc-rezound-verizon/software-updates
HTC Diag Drivers
http://www.filedropper.com/htcdiagdrivers
CMDA WS 2.7 (3.8 is ideal if you have the cash to buy it! I think you could do the whole phone with the full version.)
http://www.filedropper.com/cdmaworkshop27fullfree-gsm-unlockblogspotcom
DFS - download from http://cdmatool.com/Download and register for Demo account at http://cdmatool.com/Register it shouldn't expire and a Demo account will work fine, just has a nag screen making you wait 60 seconds every time you run it. After you download & install make sure to enter your login that you registered.
http://www.filedropper.com/dfs4006
QPST 2.7 build 366
http://www.filedropper.com/qpst27366
PRL and DFS settings: Contains the Straight Talk PRL for VZW/Sprint phones, and screenshots for how the DFS settings should look on a phone to get 3G working: I am using prl - 59299
http://www.filedropper.com/rezoundphone
This guide was for Flash VZW HTC Rezound/Vigor Full Flash to Cricket Wireless but it works the same and credit does to jtheis23 at XDA. from kr8zeivan's post.
First make sure you install HTC Sync for your drivers, put phone is DIAG mode (##3424#) and pull up you device manager to unsure your phone is recognized. You should see two ports:
HTC Diagnostic Interface
HTC Diagnostic Interface 9k
I understand that 8k (HTC Diagnostic Interface) is voice and 9k is net/web. If you are all good its ok to uninstall HTC Sync. Make sure you disable any anti-virus that may be running as it will remove CDMA WS it will think it a trojan because of key generator. Next I used CDMA WS to unlock phone, write NV only, write NAM 1 & 2 and write prl. If you are using the cracked version click on the yellow round icon with a small star and it will launch key and open program. WS 2.7 can use ports 1-25 so make sure you have your device connected to ports 25 or under.
1. Connect to HTC Diagnostic Interface port from the MAIN tab. Go to SECURITY tab look for SPC area (Do not read) just
enter 000000 click on SPC then click send. You should get a message saying your phone is unlocked.
2. Go to OTHER tab look for R-UIM Config: Select NV only then click on write. Should get a message saying change was successful. You can now write your prl.
3. Look for PRL on the OTHER tab should be just above R-UIM. Make sure it stays in "universal" and NAM1 and click write
load your preferred prl it should say prl written successfully. Then do the same for NAM 2. Click on MAIN tab and disconnect.
4. Connect to HTC Diagnostic Interface - 9k port from MAIN tab. Go to SECURITY tab look for SPC area (Do not read) just enter 000000 click on SPC then click send. You should get a message confirming you are unlocked. Repeat steps 2 and 3.
5. Go to MAIN tab and disconnect. Reboot phone. On my first reboot I notice it did not write but reverted the prl back to Verizon's 58008 prl. However when I continued to write the Nam info on the next steps it stuck. I don't know why.
6. After reboot put phone back into DIAG mode and reconnect to 8k port go to SECURITY and unlock the phone. Go to NAM tab. From here I was able to read from phone and write without errors. Read from Nam 1. Update MIN/MDN, MCC (310) MNC (00), local SID (whatever yours is)/NID (65535)/IMSI (xxxxxxxxxxxxxxxx) make sure you replace the X's with your area code and MIN. I used PRL enabled, System Standart, Otapa enabled. Write to phone. Repeat steps for Nam 2. Go to MAIN tab and disconnect.
7. Connect to HTC Diagnostic Interface - 9k port. Go to SECURITY tab and unlock phone. Go to NAM tab and repeat step six. Write to phone. Go to MAIN tab and disconnect. Reboot phone. After reboot from phone go to settings >Wireless networks> Mobile Networks> Network mode> Change to CDMA only. Go back to home screen. From dialer press *#*#4636#*#* and call. Go into Phone information and set preferred network type to CDMA auto (PRL). Press turn off radio (this may take a few seconds) then turn radio on (this may take a few seconds) exit. You should now have talk and text. (My rezound is rooted and I downloaded LTE switch here to change the radio to cdma prl auto)
8. Put phone back into DIAG mode ##3424# call and to to WS 2.7 to unlock only. Go to QPST and connect to 8k port. Read from phone .For me I was able to follow the QPST tutorial with no problem and update both profiles did M.IP and PPP and wrote to phone with no issues. Reboot. When I tried doing the same on 9k port I got "Serious error encountered write aborted". I tried doing it without reading just writing and still got the error message. So I finished the EVDO settings for 9k port in DFS.
Follow the pics for dfs settings.
9. Put phone in DIAG mode go to WS 2.7 to unlock phone. Launch DFS 3.3.0.7 (I used Demo version and it worked for me) connect only to port 9k do not read! Go to PROGRAMMING tab select DATA tab enter PPP UID (your#@vzw3g.com.com) pwd (vzw) write. Then Go to M.IP go to Selected Profile Settings enter NAI (your#@vzw3g.com). Set Prim HA address to 0.0.0.0, set Sec HA address to 0.0.0.0 go to Share Secret User Profile. AAA shared secret (verizon) HA shared secret (verizon). Write current profile settings. At this point you may get failed to write messages at the bottom. Just ignore them. Repeat these steps for NAM2. Press Reset upper right hand corner. If your phone does not reboot on its own reboot it. If you want you can go back into DFS and read phone from PROGRAMMING and DATA tab to see if your PPP settings stuck. Do the same for M.IP if they did not try repeating the process. I had to do it a couple of times got error messages but sure enough they wrote to phone and I was successful in getting data 3g on phone.
Grats on getting it to work on Verizon. I also have thought about doing this but just wish there was a way to get their 4g service
I got it working on straight talk with an att sim on hspa. Still want to tweak with it more to get my speeds better and connection more stable.
Sent from a galaxy far..far..away....
anubis2k3 said:
Grats on getting it to work on Verizon. I also have thought about doing this but just wish there was a way to get their 4g service
I got it working on straight talk with an att sim on hspa. Still want to tweak with it more to get my speeds better and connection more stable.
Sent from a galaxy far..far..away....
Click to expand...
Click to collapse
I have a at&t sim card from straight talk on order. I was going to give it a try also, since all you do is transfer the number over. I want that 4g too, but like the $45 for everything.
watt19 said:
Update MIN/MDN, MCC (310) MNC (00), local SID (whatever yours is)/NID (65535)/IMSI (xxxxxxxxxxxxxxxx) make sure you replace the X's with your area code and MIN.
Click to expand...
Click to collapse
Where do I get the info to update these fields if I never turn on the donor phone to obtain it's phone number/info?
Straight talk gives you the phone number after you activate the phone with the meid. Phone doesn't need to be on to do this I don't think.
Sent from a galaxy far..far..away....
isn't this cloning the esn, which is illegal?
rjuds82 said:
Where do I get the info to update these fields if I never turn on the donor phone to obtain it's phone number/info?
Click to expand...
Click to collapse
The min is all you need and you can get it when you call straight talk and activate, like the post by anubis2k3 states.
When you get ready, I will help with that part.
nrfitchett4 said:
isn't this cloning the esn, which is illegal?
Click to expand...
Click to collapse
That's what flashing is. I pay for the service but use what phone I what, so How is that wrong? I payed for the phones, so I use what I want.
watt19 said:
That's what flashing is. I pay for the service but use what phone I what, so How is that wrong? I payed for the phones, so I use what I want.
Click to expand...
Click to collapse
Agreed. Not illegal. In fact, it was ruled that modifying any electronic device by the user is legal. However, the manufacturer has the right to not accept the device under warranty after said modifying.
Sent from my ADR6425LVW using Tapatalk 2
Followed the guide and at the end of step 7 I do NOT have talk and text. Not working.
nrfitchett4 said:
isn't this cloning the esn, which is illegal?
Click to expand...
Click to collapse
Per the FCC, yes it is.
Sent from my Honey Badger
rjuds82 said:
Followed the guide and at the end of step 7 I do NOT have talk and text. Not working.
Click to expand...
Click to collapse
You was able to get the esn and prl saved, correct. When you look at the settings what do you have. It should look like the pictures for the zip file.
At step 7 did you go to the market and download the lte switch and change to CDMA prl auto only?
I looked at the guide and I did not explain how to change the esn on the phone. This was the only way I was able to change my esn on my rezound.
Part2
Changing the MEID...
1.Dial ##3424# on your phone and plug it into your computer.
2.Open QPST Configuration and connect to the HTC COM port.
3.Open the EFS Explorer client using QPST Configuration
4.Make a folder called "open sesame door" in the root directory of the phone.
5.Restart your phone and connect to it again the same way. This time, the "nvm" folder will be unlocked in EFS Explorer.
5.Open the "nvm" folder and copy the "0" and "1943" files to your computer. The file named "0" contains your flipped ESN, and the file named "1943" contains your flipped MEID.
6.open with a hex edit.Change the ESN/MEID to whatever you like (make sure it's flipped) in the files and copy the files back to the phone. Restart the phone, and you're good to go!
Note: A "flipped" ESN or MEID means that the ESN or MEID is reversed in groups of two. For example, if your phone's MEID were A1000012345678, it would become 78 56 34 12 00 00 A1 when flipped. The same applies for the ESN.
7. Delete file 0 and 1943 on the phone. The drag your edited files back to phone.
8. Refresh to make sure you copied the files.
9. “adb reboot” to reboot the phone.
10. Delete the “open sesame door” folder.
11. After done, check whether esn is good.
Still nothing. No voice. Try to send a text and I get cause code 65535 error class 3. Pretty sure it did that before anyway though.
rjuds82 said:
Still nothing. No voice. Try to send a text and I get cause code 65535 error class 3. Pretty sure it did that before anyway though.
Click to expand...
Click to collapse
Change those setting that I sent to you and let me know.
Update: Watt19 has been helping me with this. Tonight I finally got 3G working nicely but still can't call or text. Is it possible for data to work while having the wrong meid?
What happens if I turn on the donor phone to copy settings?
rjuds82 said:
Update: Watt19 has been helping me with this. Tonight I finally got 3G working nicely but still can't call or text. Is it possible for data to work while having the wrong meid?
What happens if I turn on the donor phone to copy settings?
Click to expand...
Click to collapse
I just sent you a reply,
Where can I get PRL 59299?
Thanks
TJ
dviperbigt said:
Where can I get PRL 59299?
Thanks
TJ
Click to expand...
Click to collapse
should be in the zip file.
If anyone has an MEID starting with a letter A, can you look in settings/about phone/phone identity and see if the letters are uppercased or lowercase? Not sure if it even matters but mine are lowercase and just seems odd.
rjuds82 said:
If anyone has an MEID starting with a letter A, can you look in settings/about phone/phone identity and see if the letters are uppercased or lowercase? Not sure if it even matters but mine are lowercase and just seems odd.
Click to expand...
Click to collapse
That does not matter. Mine is the same way.
I'll put more info later( Gotta flash another phone) but this will get the job done watch this
http://www.youtube.com/watch?v=vB1po3sdhvE&feature=youtu.be
Alright so before we start we need to get the tools.
Qpst
https://drive.google.com/file/d/0B2VIFL0RoIC8R253S2FjNkhPZXc/view?usp=sharing
Possible diag drivers
http://unrevoked.com/rootwiki/doku.php/public/revolutionary
cdmaworkshoptool (if you need to get your msl)
http://code.google.com/p/cdmaworkshoptool/
DFS
http://cdmatool.com/
PRL 53000
http://forum.xda-developers.com/showpost.php?p=36946094&postcount=81
Verizon Messenger
https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit
activate your samsung gusto 2
On your evo turn on usb debugging, install apps, and airplane mode.
Install everything and make sure everything is running and connecting well. Connect your device to your computer and open up a dialer and type ##3424# to put it in diag mode
Open up cdmaworkshoptool read msl, change it to all zeroes, and write the prl then close it.
Open up qpst and use this method here to erase your meid and esn
reboot your phone and open dfs.
Plug both devices in and add their ports to dfs.
Send this password
Code:
2011101116083112
to the gusto2 in the pwd section
Send this password
Code:
41 74 64 77 61 6F 70
to the evo 4g lte in the cmd section
Then hit read in write just as in video
adb install verizon messenger or place it on your sdcard and install it
Turn off the gusto take the evo out of airplane mode and reset it
You'll have working 3g, mms talk and text.
HOW TO GET THE NATIVE MMS APP TO WORK
open up your build.prop with es file explorer and change the sprint parts to look like this:
Code:
ro.com.google.clientidbase.yt=android-verizon-us
ro.com.google.clientidbase.am=android-verizon-us
ro.com.google.clientidbase.ms=android-verizon-us
ro.phone.min_match=7
ro.product.model=EVO
ro.cdma.home.operator.alpha=verizon
gsm.sim.operator.alpha=verizon
gsm.operator.alpha=verizon
ro.cdma.home.operator.numeric=310004
gsm.sim.operator.numeric=310004
gsm.operator.numeric=310004
save and reboot then open your dialer and type ##data# hit edit type your msl
then change /advanced/rtsp/http settings to this
rtsp proxy ip
0.0.0.0
rtsp proxy port
0
http proxy ip
0000
http proxy port
8085
backspace out of there to advanced and hit mms server url change it to:
http://mms.vtext.com/servlets/mms
then change mmsc setting to
name
verizon
mmsc
http://mms.vtext.com/servlets/mms
mms proxy
not set (erase everything there)
mms port
8080
mms protocol
wap 2.0
back space out of there and enjoy mms. The weird thing is that you have to turn off wifi to send an mms
Notes
Go to mobile network and change network mode from LTE/CDMA to CDMA other wise you'll have network disconnect problems
Requests
Hit thanks button whenever you can
Pretty please with sugar on top I would like to get rid of the dfs situation entirely and it's not needed if you have a samsung intensity 2 as a donor if you have any coding abilities at all figure out why cdma workshop tool reads the intensity ppp and aaa incorrectly but reads the intensity 100%
Asadullah said:
I'll put more info later( Gotta flash another phone) but this will get the job done watch this
http://www.youtube.com/watch?v=vB1po3sdhvE&feature=youtu.be
Click to expand...
Click to collapse
thanks sooo much !!:good: will this get 3g data working?
evo401 said:
thanks sooo much !!:good: will this get 3g data working?
Click to expand...
Click to collapse
Yes before I forget this doesn't include mms but you can download verizon messenger from the market and it will work
Asadullah said:
Yes before I forget this doesn't include mms but you can download verizon messenger from the market and it will work
Click to expand...
Click to collapse
thank you! but how do you download verizon messenger from the market? i get this when i try online since on the phone googleplay wont even show it..
This app is incompatible with all of your devices. then the install is greyed out.:good:
Their $50 plan is geared towards the dumb feature phones. If you're running this plan with an android device, how long before they boot you?
stang04 said:
thank you! but how do you download verizon messenger from the market? i get this when i try online since on the phone googleplay wont even show it..
This app is incompatible with all of your devices. then the install is greyed out.:good:
Click to expand...
Click to collapse
I'll upload it.
gpz1100 said:
Their $50 plan is geared towards the dumb feature phones. If you're running this plan with an android device, how long before they boot you?
Click to expand...
Click to collapse
I've been on it for probably 6 months I don't hold anything back use data like I want haven't had any problems except from dealers making money flashing phones that want me to stop with my videos and tutorials.
HERE"S A LINK https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit it's on google docs
what was that command you typed in dfs. thats the only thing i need. thanks.
^^Good to know... sprint 3g still blows chunks out here.. vzw somewhat better. For my data usage, functional 3g would be more than enough.
This is something to consider for when my contract is up.
Thanks
Asadullah said:
I'll upload it.
I've been on it for probably 6 months I don't hold anything back use data like I want haven't had any problems except from dealers making money flashing phones that want me to stop with my videos and tutorials.
HERE"S A LINK https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit it's on google docs
Click to expand...
Click to collapse
thank you...
btw, if you flash roms on the lte, do you have to setup mms url ? or do you just install the verizon messenger? have you tested this messeger with an aosp rom? if you flash roms ofcourse.. thank you again, really appreciate it.
i subscribed in youtube.
jamesandadina said:
what was that command you typed in dfs. thats the only thing i need. thanks.
Click to expand...
Click to collapse
41 74 64 77 61 6F 70 is what you type in command but if you find something that will let you send this as spc "tdwaop" it's like a super spc that spits out more info
stang04 said:
thank you...
btw, if you flash roms on the lte, do you have to setup mms url ? or do you just install the verizon messenger? have you tested this messeger with an aosp rom? if you flash roms ofcourse.. thank you again, really appreciate it.
i subscribed in youtube.
Click to expand...
Click to collapse
I just install the verizon messenger since it takes over as default mms without issue
This one v has been whipping me
Also what prl did you use. Any Verizon prl I used always showed roaming. And I think 00001 prl is probably bout outdated by now. Thanks. I've had good luck with ltes on straight talk but need to go to Verizon cause steaight talk says I abuse data and I have to reflash with new donor and new number every month. Its getting annoying lol. Prl please lol. If you need any help with anything I might be able to help. I'm good at the s2, s3, and the mifi 2200. I don't do it as a business just family and friends I hook up for them lol
jamesandadina said:
Also what prl did you use. Any Verizon prl I used always showed roaming. And I think 00001 prl is probably bout outdated by now. Thanks. I've had good luck with ltes on straight talk but need to go to Verizon cause steaight talk says I abuse data and I have to reflash with new donor and new number every month. Its getting annoying lol. Prl please lol. If you need any help with anything I might be able to help. I'm good at the s2, s3, and the mifi 2200. I don't do it as a business just family and friends I hook up for them lol
Click to expand...
Click to collapse
do you know how to flash the epic touch to verizon prepaid?
Watch the new laws that go into effect tomorrow January 26th 2013 making it illegal to modify a cell to operate on another network. There is another link in this section for details.
Sent from my EVO using xda app-developers app
waterbound said:
Watch the new laws that go into effect tomorrow January 26th 2013 making it illegal to modify a cell to operate on another network. There is another link in this section for details.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
That only apply on new phones
Sent from my EVO using xda premium
The new law does not currently restrict this phones flashing please don't start this non sense also it has no purpose in the flashing of this phone to Verizon
what is the dfs 16 dig pass word for htc
Asadullah said:
I'll put more info later( Gotta flash another phone) but this will get the job done watch this
http://www.youtube.com/watch?v=vB1po3sdhvE&feature=youtu.be
Alright so before we start we need to get the tools.
Qpst
http://conflipper.com/Software/QPST_2.7_366.rar
Possible diag drivers
http://unrevoked.com/rootwiki/doku.php/public/revolutionary
cdmaworkshoptool (if you need to get your msl)
http://code.google.com/p/cdmaworkshoptool/
DFS
http://cdmatool.com/
PRL 53000
http://forum.xda-developers.com/showpost.php?p=36946094&postcount=81
Verizon Messenger
https://docs.google.com/file/d/0B2VIFL0RoIC8bFVpWno4S0liTUU/edit
activate your samsung gusto 2
On your evo turn on usb debugging, install apps, and airplane mode.
Install everything and make sure everything is running and connecting well. Connect your device to your computer and open up a dialer and type ##3424# to put it in diag mode
Open up cdmaworkshoptool read msl, change it to all zeroes, and write the prl then close it.
Open up qpst and use this method here to erase your meid and esn
reboot your phone and open dfs.
Plug both devices in and add their ports to dfs.
Send this password
Code:
2011101116083112
to the gusto2 in the pwd section
Send this password
Code:
41 74 64 77 61 6F 70
to the evo 4g lte in the cmd section
Then hit read in write just as in video
adb install verizon messenger or place it on your sdcard and install it
Turn off the gusto take the evo out of airplane mode and reset it
You'll have working 3g, mms talk and text.
Notes
Go to mobile network and change network mode from LTE/CDMA to CDMA other wise you'll have network disconnect problems
Requests
Hit thanks button whenever you can
Pretty please with sugar on top I would like to get rid of the dfs situation entirely and it's not needed if you have a samsung intensity 2 as a donor if you have any coding abilities at all figure out why cdma workshop tool reads the intensity ppp and aaa incorrectly but reads the intensity 100%
Click to expand...
Click to collapse
Hi, why do you put some password in dfs after the command for htc you didn't mention about it any where can you enlighten thank you
rockndrole said:
Hi, why do you put some password in dfs after the command for htc you didn't mention about it any where can you enlighten thank you
Click to expand...
Click to collapse
It unlocks more doors
Help please.
Asadullah said:
It unlocks more doors
Click to expand...
Click to collapse
I am having an issue with a recent flash. I followed directions in the video and was successful in flashing two Evo 4g to verizon prepaid using the Gusto 2. But...I seem to be stuck roaming to the sprint towers. How do I get the phone out of roaming please?
I spoke to verizon customer service this evening and they alerted me to this. I am sure this is what is causing me to have to dial phone numbers twice. I will dial a number to call, it will connect to an automated message telling me to dial the number again, and then it will connect.
Odd, and verizon will dump me for roaming like a feind.
Thanks for the guide and any direction you could send me for help.
I had the same issue it's mainly to do with the crappy radio in the device. So what I did is flash the rom.zip from the s-off site to get to 100% stock and then flashed the 53000 prl and haven't had any problems. I am still pretty much 100% stock just removed the bloat that comes with the phone.
Asadullah said:
I had the same issue it's mainly to do with the crappy radio in the device. So what I did is flash the rom.zip from the s-off site to get to 100% stock and then flashed the 53000 prl and haven't had any problems. I am still pretty much 100% stock just removed the bloat that comes with the phone.
Click to expand...
Click to collapse
Thanks for the reply. What is the s-off site to get the Rom you talked about?
Thanks mucho.
So I bought an Evo LTE off of Craigslist, and called Sprint to ensure that the MEID DEC was clear to activate on the network. I was given the green light by them.
Unfortunately, I'm only able to activate Voice and SMS when on my line. I've spent countless hours with Sprint techs trying to get the data to work but to no avail. We tried many different dialer codes and still no luck. One thing of note, they had the wrong MSL in their system for this phone. I rooted the phone and used MSL reader to find the right code but still unable to activate data.
FWIW, the MSL is 000000 and after doing some research I've seen that MSL is when the phone is flashed over to Cricket? But it's strange because I'm able to activate voice and SMS just fine, just no cellular data (wifi is fine).
Any ideas? At this point the person isn't being responsive for a refund and I might just have to write this off, but it sucks regardless.
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2137826
Check it out you might need to do a complete wipe as stated in this thread in the last resource:
4. This is your last step before calling sprint (which i have never had to, this has always worked for me).
THIS WILL WIPE EVERYTHING IN DATA/APP AS WELL AS YOUR INTERNAL SD! YOU HAVE BEEN WARNED SO MAKE A BACKUP
Enter Dialer
##786#
select menu and select reset
enter msl and select ok
After phone goes through "hands free activation" go into settings/system updates/ and update your profile and you should be set
Make sure you thank this guy: gunfromsako for this helpful thread... Good luck!
I hadn't tried the ##786# yet and it worked!!!!!
Thank you SO much for your insight.
No problem, be sure to thank the Op from that link that I sent you, he made that helpful guide that I have used myself a lot with my two replacements, anyways I'm glad you was able to get your issue resolved :beer:
Sent from my EVO using xda app-developers app