Related
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
hanissusa said:
I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
This thread was hardly 1 hour old and you make a rather rude statement. This forum is supported by volunteers, not people that sit around all day waiting for posts to come in and find a solution that drops out of no-where.
hanissusa said:
I had the same problem and most likely noone will help you on this board.... I read the forum, then asked for help and still no educated replies... I feel like this forum is run by HTC producers and they make you brick the phone and force you to and go buy a new one !!!
Click to expand...
Click to collapse
You are not going to make any friends this way mate. If you want quick solutions then read all the material that's on here and search for the answer yourself.
If you don't want problems then leave your phone in its standard state.
WB
@camus_dvd: have you checked out the wiki? There may be a solution there. If not, you need to give us more info?
Have you ever successfully flashed before?
Give us Versions? Windows, ActiveSync, .NET, ROM, RUUWrapper (e.g. is it the custom or a standard shipped), etc.
Did you try removing the battery for a couple minutes?
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
These answers will help us help you.
Oh, and about the volume issue, try using the google search link in my sig to search the forum for "hermes low volume tweak" or something like that. I had a similar problem, but cannot remember the tweak. I do not THINK It was the one you posted.
Heck - onew final edit. I got curious and did the searching. You will find a thread HERE and it references a tweak in the wiki HERE HERE . Hope this helps.
@hanissusa: sorry you did not get any "intelligent" answers. If you are unhappy, you are not a prisoner here.
If you want quick solutions then read all the material that's on here
Click to expand...
Click to collapse
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
The reason I tried to flash my radio bootloader is because suddenly the phone started to freeze(about every 30 mins). I thought may be the operator has a new radio version so I need to upgrade in order to get the best connection and most importantly never have my phone freezed again.
Did you try removing the battery for a couple minutes?
Click to expand...
Click to collapse
Tried about 20 times, still unable to flash radio rom with any of the available versions. Always freezes at 0% thru RUU, if I use SD card method freezes in the 10-15% range. I am able to flash everythin, including SPL, operating system, but not the radio rom !!!
Did you try connecting while in bootloader mode, instead of in normal state? (e.g. put phone in BL, THEN attached USB, then run updater)?
Click to expand...
Click to collapse
Tried that as well. Tried using MMTY, checksum gives me radio error.
sorry you did not get any "intelligent" answers
Click to expand...
Click to collapse
I got several answers of this type:
"Go read Wiki"
"Go try this method"
and I have done all of it and nothing helped the problem.
You can consider above answers very intelligent, however I did not get a single anser form POF or Olipro - people who actually created this software and know most of the tricks.
for me same problem, only that i can't use my device anymore( : I tried to install another rom, Hermes_WM6_WWE_vp3G_v3[1].61.0_ATT_Full.rar and Touch_I_interface_beta.zip and crashed. and now, i enter in bootloader, if i want to make super cid it tells me to connect the pda even if is connected. and if i try to install other roms is stuck on 0%
hanissusa said:
I spent 3 days reading the forum, trying all kinds of methods to unbrick it, however it still dead. Is it considered a quick solution ?
Anyways, I successfully flashed my device and made SUPER CID, so its fully unlocked. Thats the only flash I have done prior to upgrading the radio bootloader. I hold 2 computer science degrees and I could understand most of the stuff discussed on this forum, however it didnt solve the problem.
Click to expand...
Click to collapse
I wonder what kind of institution gave you said degrees? I have a degree in Japanese and Linguistics but I suck at both.
hanissusa said:
"flashed my device and made super CID, so its fully unlocked"
Click to expand...
Click to collapse
Flashed and superCID does NOT mean fully unlocked. If you can read programming and or networking text books, I don't understand what is so hard about the wiki?
If you read everything and actually tried to understand it all, then you would know that flashing the radio is inherently dangerous and that 9/10 times the radio is not the issue.
camus_dvd said:
Problem:
use RUUWrapper.exe to Updata, final step, then Phone Screen stays in 0%, the RUU programs shows a 302 Error. when I did what it told me to, everythings happened again.
First happened when I updata my Radio from 1.51.00.00 to 1.47.00.00
and happened again when I updata the ROM (OS only)
Q:
1. How to solve this?
2. After I upgrade the Radio to 1.51.00.00 I can't hear the others clearly when pick up a phone. try to up the volume, but useless, which version will be OK?
3. any REG modify solution?
I try to modify the REG
HKEY_CURRENT_USER ->
ControlPanel ->
SoundCategories ->
InCall ->
InitVol ->
DWORD Data
6 to 9
but seems no change
Click to expand...
Click to collapse
Read here:
http://forum.xda-developers.com/showthread.php?t=332565
then here:
http://forum.xda-developers.com/showpost.php?p=1177210&postcount=5
or from here:
http://wiki.xda-developers.com/
then read the stickies and do a search.... it's all been discussed before
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Is there a senior, experienced member on this forum from London, UK ? Please help me fix the radio, beers and drinks are on me.
ady_uaic said:
does exists any way to upgrade my dead tytn from storage card? I have an Qtek S200 and a HTC P3300 (if i can use them to restore my dead tytn). please all. I don't know what to do with him
Click to expand...
Click to collapse
Is this what you are looking for?
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
@hanissusa,
Why don't you just send your device back to the repair centre, foot the bill, and put it all down to experience? You may have a hardware problem that nothing on here might solve.
You might be better off going down that route than going through the pain of trying to sort it and not getting anywhere. Also stops you p**sing people off on here. You can't claim that just because you have had a bad experience we should all stop flashing our devices.
We are all aware of the risks and if we can't fix it then its put your hand in your pocket time and send it back to be repaired.
Good luck with it; hope it all works out.
WB
thx a lot. I will try it, 'cause i'm tired to use all kind of stufs
my first SPL was 1.03 but after a try of upgrading ROM it was modifed in 2.03 and i think this is the problem. does anyone knows how to modify it?
how can i downgrade my SPL ?
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
hanissusa said:
pi$$ing people off ? hey chill back I am just giving experienced advice to other people, just as you do. The fact that our opinions are different does not mean that you are right and I am wrong.
Anyways, I have T-Mobile MDA, as far as I udnerstood HTC repair would not care to fix it ?
Click to expand...
Click to collapse
Have you called the repair centre to see whether they will fix it or not? Your worse case scenario is that they say no. There again they might say yes, especially if you are willing to foot the bill, or put you in contact with another company who can sort it out for you.
I really do hope you can get it fixed; however I think you have started out on the wrong footing on this board and you may well find that people on here now just don't want to help you out (please don't shoot the messenger).
Good luck with it.
Cheers
WB
ady_uaic said:
how can i downgrade my SPL ?
Click to expand...
Click to collapse
You can't without a running OS setuped on your device. If you don't have the HardSPL you should try to flash with the default flasher AND a rom matching your CID.
If there is a rom matching your CID out you may have quite good chance to get your hermes back to live. Toying without hardspl is a really bad thing
and that hardSPL how can i do it?
Have you called the repair centre to see whether they will fix it or not?
Click to expand...
Click to collapse
Which centre should I call if I live in London, UK ? Maybe somebody wants to help me fix this and get paid ?
HEY ALL,
I AM A FAIRLY EXPERIENCED USER WITH WM DEVICES, IN FACT I HAVE PUT TOGETHER SOME DECENT ROMS FOR THE KAISER, BUT I AM PRETTY NEW TO THE ADVANTAGE AS I JUST PICKED ONE UP LAST WEEK. PLEASE EXCUSE MY IGNORANCE IN THIS ISSUE, AS IT SEEMS JUST AN ISSUE OF ME MAKING AN EXTREMELY "ROOKIE" MISTAKE.
I HAVE READ, READ, READ AND READ SOME MORE, AS ONE SHOULD ALWAYS DO, BUT SOME HOW I GOT MYSELF INTO SOME TROUBLE WHILE RUNNING THE ATHENA UNLOCKER ON MY ADVANTAGE X7501... BIG TROUBLE...
I RAN THE UNLOCKER, AND FELT PRETTY COMFORTABLE WITH THE PROCESS, BUT WHILE THE UNLOCKER WAS RUNNING, AFTER IT ALLOOWED ME TO BACK UP MY SPL, IT WAS RUNNING SCRIPTS AS USUAL, AND I RECIVED AN UNUSUAL WINDOWS ERROR WITH THE UNLOCKER APP (PROGRAMS HAS EXPERIENCED ABNORMAL ACTIVITY OR SOMETHING TO THAT EFFECT...) THEN GAVE ME THE OPTION TO CONTINUE OR QUIT, SO I CHOSE CONTINUE, BUT THE DEVICE DID NOTHING MORE AND THE UNLOCKER BASICALLY FROZE. THE PC WAS "OK", AS FAR AS NOT BEING FROZE UP, BUT THE UNLOCKER WOULD NOT MOVE ANOTHER STEP! AFTER WAITING NEARLY AN HOUR, I DECIDED TO DISCONNECT (BAD IDEA, I SHOULD HAVE KNOWN BETTER, I REALIZE THIS PROBLEM IS BY ALL MEANS MY OWN FAULT!).
AFTER DISCNNECT, DEVICE APPEARED FINE UNTIL FIRST SOFT RESET, THEN I GOT NO BOOT, NO BOOTLOADER WITH ANY KEY COMBINATION, AND NOTHING ELSE. I CAN GET DEVICE TO WHAT WOULD NORMALLY BE THE STANDARD BL SCREEN, BUT NO OLIPRO SPL, NO WRITING AT ALL, AND NO SERIAL OR USB WHEN CONNECTED OR DISCONNECTED FROM PC! ALL I HAVE IS TRI-COLOR SCREEN WITH NO WRITING, REGARDLESS OF KEY/RESET COMBINATIONS THAT I HAVE TRIED, WHICH I BELIEVE ARE ALL OF THEM!
I AM OUT OF OPTIONS, I WAS HOPING SOME OF MY FELLOW XDA FOLKS COULD HELP AN "IDIOT" IN NEED! I WOULD CERTAINLY APPRECIATE IT !
ALSO I WOULD GLADLY PROVIDE ANY MORE INFO IF NEEDED FOR FURHTER ADVICE. THANKS IN ADVANCE.
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda(Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Alex- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex!))
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
Attached Images
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
__________________
HTC ADVANTAGE X7501 AT&T TILT 8925 VERIZON XV6700
THEQUARTZGUY said:
HEY ALL,
I AM A FAIRLY EXPERIENCED USER WITH WM DEVICES, IN FACT I HAVE PUT TOGETHER SOME DECENT ROMS FOR THE KAISER, BUT I AM PRETTY NEW TO THE ADVANTAGE AS I JUST PICKED ONE UP LAST WEEK. PLEASE EXCUSE MY IGNORANCE IN THIS ISSUE, AS IT SEEMS JUST AN ISSUE OF ME MAKING AN EXTREMELY "ROOKIE" MISTAKE.
I HAVE READ, READ, READ AND READ SOME MORE, AS ONE SHOULD ALWAYS DO, BUT SOME HOW I GOT MYSELF INTO SOME TROUBLE WHILE RUNNING THE ATHENA UNLOCKER ON MY ADVANTAGE X7501... BIG TROUBLE...
I RAN THE UNLOCKER, AND FELT PRETTY COMFORTABLE WITH THE PROCESS, BUT WHILE THE UNLOCKER WAS RUNNING, AFTER IT ALLOOWED ME TO BACK UP MY SPL, IT WAS RUNNING SCRIPTS AS USUAL, AND I RECIVED AN UNUSUAL WINDOWS ERROR WITH THE UNLOCKER APP (PROGRAMS HAS EXPERIENCED ABNORMAL ACTIVITY OR SOMETHING TO THAT EFFECT...) THEN GAVE ME THE OPTION TO CONTINUE OR QUIT, SO I CHOSE CONTINUE, BUT THE DEVICE DID NOTHING MORE AND THE UNLOCKER BASICALLY FROZE. THE PC WAS "OK", AS FAR AS NOT BEING FROZE UP, BUT THE UNLOCKER WOULD NOT MOVE ANOTHER STEP! AFTER WAITING NEARLY AN HOUR, I DECIDED TO DISCONNECT (BAD IDEA, I SHOULD HAVE KNOWN BETTER, I REALIZE THIS PROBLEM IS BY ALL MEANS MY OWN FAULT!).
AFTER DISCNNECT, DEVICE APPEARED FINE UNTIL FIRST SOFT RESET, THEN I GOT NO BOOT, NO BOOTLOADER WITH ANY KEY COMBINATION, AND NOTHING ELSE. I CAN GET DEVICE TO WHAT WOULD NORMALLY BE THE STANDARD BL SCREEN, BUT NO OLIPRO SPL, NO WRITING AT ALL, AND NO SERIAL OR USB WHEN CONNECTED OR DISCONNECTED FROM PC! ALL I HAVE IS TRI-COLOR SCREEN WITH NO WRITING, REGARDLESS OF KEY/RESET COMBINATIONS THAT I HAVE TRIED, WHICH I BELIEVE ARE ALL OF THEM!
I AM OUT OF OPTIONS, I WAS HOPING SOME OF MY FELLOW XDA FOLKS COULD HELP AN "IDIOT" IN NEED! I WOULD CERTAINLY APPRECIATE IT !
ALSO I WOULD GLADLY PROVIDE ANY MORE INFO IF NEEDED FOR FURHTER ADVICE. THANKS IN ADVANCE.
SORRY FOR LONG POST, JUST TRYING TO PROVIDE AS MUCH INFO AS POSSIBLE...
Click to expand...
Click to collapse
Hi
You could try Hard Reset BY Volume down+Stylus reset. if it turns on and load OS then you can use the unlocker again without Sim and Memory card(but your pc must have netframe work 2.0 installed and updated). If your device failed to load OS then you have to find the original rom for your device (which you can download from this website "use the search function") then unlock your device with olipro's latest unlocker.
Good luck
I got this once when I tried to flash from the memory card.
Remove both memory and sim card and battery for 10 mins.
make sure you are disconnected from the puter.
put battery in and hold the camerabutton all the way in and press the reset pin and hopefully you will enter the bootloader proper.
Which version of olipros unlocker did you use
Try to use the last version as it is less prone to trouble and works better on x7501
see this post as well(though not exactly your problem)
http://forum.xda-developers.com/showthread.php?t=374734
I would also recommend flashing from an xppro machine with the latest activesync
just reinforcing above post as well
I had a similar problem which I outlined here...
http://forum.xda-developers.com/showthread.php?t=368312
Notice the screenshots about a third of the way down.
Does your Advantage bootscreen look like this?
-Alex-
try inserting an SD card and boot to this strange bootloader screen
does it say Loading (then No image found)?
also, i assume you mean the PC does not see the device either?
what athena version have you all got? x7501? brand new? maybe HTC changed something about them...
Still No Luck!!! Any More Advice? It Would Be Appreciated...
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda (Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Bairda (Alex)- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex)!)
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
PLEASE FEEL FREE TO PM IF YOU HAVE ANY INFO AT ALL THAT COULD HELP A GUY OUT! THX!
if it can't load an image from SD and PC (with XP) can't see the device, then it needs to be sent back, if possible under warranty
bad choice
hay there first time some thing like that happen to me i was stuck for hours but then i got into boot loader in flashed the pk 3.0 and it worked so if u can see the olipro 1.20 thing then its all good and if u cant then mabee ur f***d that type of error u got its supose to cum near the end
THEQUARTZGUY said:
Hey All,
Thanks For All Of Your Helpful Advice, Unfortunately, I Think Im In A Little Deeper Than That
Bairda (Alex), I Looked At Your Screen Shots From Your Post, And Yea!!! That Is Exactly What My Device Looks Like!!! I Can Load The Bootloader, But Tricolor Only!!!! No Letters/ Version Numbers/ Anything!!!! I Really Dont Know What Else To Try, As I Know How To Flash A Rom From The Storage Card, But I Cannot Even Get The Bootloader To Load Properly!!! Any Advice Bairda (Alex)- Or Anyone Else?
Again, Got Disconnected After Having Issue With 3 Step Unlocker, After 1st Soft Reset, No Boot/ No Os/ Not Bootloader Screen With Ver Numbers And Spl/.... Only Tricolor With No Writing!!! I Have Attatched Alex's Thumbnails, As It Is Exactly What Mine Is Doing... (hope Thats Ok Bairda (Alex)!)
Also, Just Note That I Am Running Vista Home Premium, With All The Latest Updates/service Packs...
Please See Pics And I Would Appreciate A Minute Of Anyones Time To Get This Thing Going... Also, I Would Of Course Be Willing To Make A Donation Of What Ever I Can Scrounge Up For Some Assistance On This Issue!
Thanks So Much!!!
PLEASE FEEL FREE TO PM ME OR EMAIL ME AT [email protected] IF YOU HAVE ANY INFO AT ALL THAT COULD HELP A GUY OUT! THX!
Click to expand...
Click to collapse
Sorry that you are having the same problems that I did. Unfortunately, I can't bring you much comfort as I tried everything that I could find or was suggested. I searched every post and put out multiple cross-postings (that is a real sign of desperation for me!). Ultimately I had to get a new unit from Amazon as I could NOT get it back from the land of rainbow death that you see in the pics. I am no expert with the Athena/Advantage but I am also pretty experienced with computers and rarely ever get myself into a no-win like this. It takes alot for me to give up and declare a piece of equipment beyond my ability to fix, but this was one of those times.
I think that I traced the eventual cause to one (or a combination) of the following:
- Leaving the SIM and the Mini SD in the unit during the flash process
- Some glitch when using vista with the bootloader
- Using an older version of the OliPro unlocker (very likely the cause)
- Somehow panicing during the unlock and interupting the upgrade. You MUST do all three steps of the unlock to be safe.
I repeated the unlock with replacement unit being careful to use the latest bulletproof unlock and had no problems. But the original unit did have to go back.
I sincerely hope that you have better luck! Tell me how it turns out! If there is any other info you think you might be able to use from my experience, please ask away!
-Alex-
bairda said:
You MUST do all three steps of the unlock to be safe.
Click to expand...
Click to collapse
nope, the second and third steps are only for sim unlocking
But if you what to uprage a new Radio you have to do a SIM unlock?
cmonex said:
nope, the second and third steps are only for sim unlocking
Click to expand...
Click to collapse
I stand corrected.
I would caution though, that for new users it would be best to follow the procedure through all 3 steps. As I understand it there is no harm in doing this other than the increase cost in time and effort and may be less confusing and safer then just doing the first.
Is this correct?
-Alex-
marthynovak said:
But if you what to uprage a new Radio you have to do a SIM unlock?
Click to expand...
Click to collapse
nope, it's got nothing to do with the radio version
it's another area where simunlock info is stored
bairda said:
I stand corrected.
I would caution though, that for new users it would be best to follow the procedure through all 3 steps. As I understand it there is no harm in doing this other than the increase cost in time and effort and may be less confusing and safer then just doing the first.
Is this correct?
-Alex-
Click to expand...
Click to collapse
well it can't do much harm, of course less flashing means less risk, and step 2 and step 3 both flash a radio.
as a newbie i'd imagine it's easier to just do step 1 because step 2 can cause corruption to the OS so it needs to be reflashed and the black screen scares the newbies etc.
What I have noticed reading this board too is that sometimes the type of USB cables used matters. I do not know why, but this happened to me too. I failed at step #2 and couldn't figure it our why. To resolve this I changed everything. From computer to usb cables to fresh files, to restore old image and re-tried the process and it worked.
Also one thing I noticed is that the old unlocked is linked allot instead of the new unlocker which is almost bullet proof. Some folks did download the old unlocker and tried it on their x7501 and bricked their device....
Palonek's Business Management Systems and development http://www.edward-palonek.com/
Problem Resolved!!! Please Read, Very Important Information!!!
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
THEQUARTZGUY said:
OK EVERYONE, MY PROBLEM IS RESOLVED, BUT I WANTED TO POST EXACTLY WHAT HAPPENED FOR EVERYONE TO SEE, ESPECIALLY FOR NEW FOLKS... AFTER HAVING THE ISSUES ABOVE, I CONSULTED WITH MANY PEOPLE TO TRY MANY, MANY METHODS OF RECOVERING THE DEVICE. ALL ATTEMPTS TO RECOVER WERE UNSUCCESSFUL, AS IT APPEARS THAT I USED THE INCORRECT UNLOCKER!!!
BASICALLY, THE UNLOCKER THAT I USED IS THE OLDER ONE, THAT SHOULD NEVER BE USED ANYMORE! AFTER THE SPL WAS ERASED, THE PROCESS ENCOUNTERED AN ERROR BEFORE IT WAS ABLE TO RE-FLASH THE NEW SPL. I HAPPENED TO CALL HTC AS A LAST RESORT, AN ONLY TOLD THEM THAT MY PHONE WOULD NOT TURN ON. I THEN SENT IT TO THEM, AND THEY TOLD ME THAT EVEN THOUGH I PURCHASED THE DEVICE USED, IT IS STILL UNDER WARRANTY DURING THE APPLICABLE DATES (WHICH IS 15 MONTHS FROM DATE OF MFG).
SO IN SHORT, THEY REPLACED MY MOTHERBOARD, AS THEY FLASH MEMORY CHIP WAS UNABLE TO BE RE-FLASHED. LUCKLIY, I WAS ABLE TO GET MY DEVICE REPLACED AT NO COST, BUT THIS MISTAKE COULD COST SOMEONE A $1000 DEVICE!!!
AS A RECAP, I AM LISTING A LINK TO THE GOOD ADVANTAGE X7501 UNLOCKER, AND A LINK TO THE OLD ONE, WHICH SHOULD NOT BE USED FOR THE X7501, IN MY EXPERIENCE... IT WAS ALSO CONFIRMED BY A REPUTABLE SENIOR MEMBER THAT THE OLD/BAD UNLOCKER SHOULD NOT BE USED AS WELL.
-GOOD/SAFE X7501 UNLOCKER: (FILE CALLED ATHENAWRAPPER, IN FIRST POST): http://forum.xda-developers.com/showthread.php?t=316846
-BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831
HOPE THIS INFORMATION IS USEFUL FOR EVERYONE! IF ANY OF THIS IS INCORRECT, PLEASE FEEL FREE TO COMMENT, BUT THIS IS WHAT MY EXPERIENCE LED TO.
Click to expand...
Click to collapse
Hi there,
Thanks indeed for the important info. I haven't yet tried the unlocker. But to my understanding the link " -BAD/OLD X7501 UNLOCKER, READ 1ST POST: http://forum.xda-developers.com/showthread.php?t=315831"
points to the latest version of the unlocker. The file I have downloaded is dated in November 2007. This is not correct? And what does the wrapper mean?
Could you please explain? I bought my X7501 in the US, but live in Europe and such a mistake could be totally fatal!
Thanks for your feedback.
Regarding The "bad" Unlocker....
Hey Dodonian / Everyone,
Yea, I Agree That It Is Somewhat Confusing About The "latest" Unlocker Version, But While Dealing With The Issues I Have Had Lately, I Spoke With Olipro, Who Makes The Unlocker, And When I Sent Him The Link That I Labeled Bad In The Last Post, He Replied That It Appeared I Had Tried The Older One, And That The Link To The Other One Labeled "good" Was Infact The Best One.
I Could, I Guess, In Some Way Be Mislead Here, But Just For Your Info, I Did Just Receive My Fixed Advantage X7501 Today, And Immediately Ran The "athena_wrapper" Which Is Availible On The "good" Link That I Posted. It Ran Good And Flashed Directly From The Bootloader. Afterwards, I Was Able To Flash My Own Custom Rom With No Difficulty, And All Went Well.
Hope This Answers Your Question!
---ryan
THEQUARTZGUY said:
Hey Dodonian / Everyone,
Yea, I Agree That It Is Somewhat Confusing About The "latest" Unlocker Version, But While Dealing With The Issues I Have Had Lately, I Spoke With Olipro, Who Makes The Unlocker, And When I Sent Him The Link That I Labeled Bad In The Last Post, He Replied That It Appeared I Had Tried The Older One, And That The Link To The Other One Labeled "good" Was Infact The Best One.
I Could, I Guess, In Some Way Be Mislead Here, But Just For Your Info, I Did Just Receive My Fixed Advantage X7501 Today, And Immediately Ran The "athena_wrapper" Which Is Availible On The "good" Link That I Posted. It Ran Good And Flashed Directly From The Bootloader. Afterwards, I Was Able To Flash My Own Custom Rom With No Difficulty, And All Went Well.
Hope This Answers Your Question!
---ryan
Click to expand...
Click to collapse
Thanks Ryan!
I see. I know that the X7501 is sold unlocked in the US and therefore only the 1st step of flashing the SPL would make sense. That means that if run the athena wrapper, all will be OK for flashing radio, ROM etc. I that correct?
Two more questions, if you don't mind.
1.Did you need to install .NET to run the Athena wrapper?, or is it kind of pre-installed mostly?
2.What is your experience with the cooked ROMs? Running stable? Can you flash back the original ROM if required?
Thanks
Dod.
I ran the 'wrapper' this week, step 1 only, so I could upgrade the radio driver. I first ran the bad unlocker and got the 'black screen of death', but after reflashing a good ROM, then the good 'wraapper', then the latest radio all is well.
Hey guys...sorry if this has been covered. I tried searching the forums and can't seem to find anything on it.
All of the roms seem to be plug it in, install it and BLAM, you're ready to go.
My issue is that I get a communication error everytime I try to install any roms or the HardSPL. The exact error given is "The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the error so you can continue with the update."
While performing the updates, I hear the sound as if my USB disconnects, then it reconnects after it restarts into the multi-colored screen. It shows "Security disabled" at the top of the screen. It proceeds to the loading bar and just sits at 0% until it comes up with the disconnect screen.
I'm using the HTC Touch Pro running WM6.1 on the Sprint network.
Again, sorry if this has already been discussed, I just couldn't find anything on it.
rceubanks said:
Hey guys...sorry if this has been covered. I tried searching the forums and can't seem to find anything on it.
All of the roms seem to be plug it in, install it and BLAM, you're ready to go.
My issue is that I get a communication error everytime I try to install any roms or the HardSPL. The exact error given is "The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the error so you can continue with the update."
While performing the updates, I hear the sound as if my USB disconnects, then it reconnects after it restarts into the multi-colored screen. It shows "Security disabled" at the top of the screen. It proceeds to the loading bar and just sits at 0% until it comes up with the disconnect screen.
I'm using the HTC Touch Pro running WM6.1 on the Sprint network.
Again, sorry if this has already been discussed, I just couldn't find anything on it.
Click to expand...
Click to collapse
Your phone's cdma. This is a gsm forum. I'm assuming that you're trying to brick your phone with the gsm hard spl and not trying to flash the proper hard spl. Stop doing that, your phone is getting pissed at you. Go to ppcgeeks or the cdma (Herman, not Raphael) forum here.
haha leave it to me to find the wrong way to do something. I appreciate your heads up Ted!
rceubanks said:
Hey guys...sorry if this has been covered. I tried searching the forums and can't seem to find anything on it.
All of the roms seem to be plug it in, install it and BLAM, you're ready to go.
My issue is that I get a communication error everytime I try to install any roms or the HardSPL. The exact error given is "The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the error so you can continue with the update."
While performing the updates, I hear the sound as if my USB disconnects, then it reconnects after it restarts into the multi-colored screen. It shows "Security disabled" at the top of the screen. It proceeds to the loading bar and just sits at 0% until it comes up with the disconnect screen.
I'm using the HTC Touch Pro running WM6.1 on the Sprint network.
Again, sorry if this has already been discussed, I just couldn't find anything on it.
Click to expand...
Click to collapse
Try here: CDMA Herman
same issue on GSM phone
Hi I have the same problem on a GSM phone.
I get the updating bar on my phone- it stays stuck at 0%.
then a communications error
Thanks in Advance
What is the problem with the RUU update?
I have searched for a solution to the RUU update/upgrade problem; none so far. Apparently, it is a major issue. I am interested in upgrading my Windows CE on my Xperia 6.1 to 6.5. I must have tried over a dozen times. The update process stops at 0% and Error [262] is reported. What can we do to resolve this? Is it compatibility or scalability issue? is it a problem with the software? The fact that it is working for some . . . and not for others is a source of concern about the stability of the software and this has potential implications; or it may well have to do with the hardware limitations of the PDA. Any ideas of a workaround?
You might try the Experia forum. You also might want to try Experia Roms.
I used to experience this issue as well. I simply go into communications and hit the USB to PC connection. Then remove the advanced functionality check. This has resolved many of the communication errors when playing with ROMS. This has been true with both GSM and CDMA devices.
I can confirm the issue. I have a 1st day release Fuze and flashed HardSPL no problem and have been making my roms ever since. But my cousin just got his new AT&T Fuze through his company and it refuses to HardSPL.
I went through several versions of the HardSPL and tried installing new drivers for the phone while in bootmode... all with no luck.
When connected through Activesync or Mobile Center, running the HardSPL brings up a confirmation windows on the phone, allowing reboots the device. It gets stuck at the black screen and times out. I've tried manually putting the phone in bootmode and trying it, but never gets past 0%.
I wonder if newer model TouchPro's are coming out with a revised bootloader?
Dunno if i can link to another forum. If not, appolgize and Admins remove the link than please.
For the 262 error, look here:
http://www.4winmobile.com/forums/windows-mobile-faq/13329-ruu-errors.html
player911 said:
I can confirm the issue. I have a 1st day release Fuze and flashed HardSPL no problem and have been making my roms ever since. But my cousin just got his new AT&T Fuze through his company and it refuses to HardSPL.
I went through several versions of the HardSPL and tried installing new drivers for the phone while in bootmode... all with no luck.
When connected through Activesync or Mobile Center, running the HardSPL brings up a confirmation windows on the phone, allowing reboots the device. It gets stuck at the black screen and times out. I've tried manually putting the phone in bootmode and trying it, but never gets past 0%.
I wonder if newer model TouchPro's are coming out with a revised bootloader?
Click to expand...
Click to collapse
Yes they are coming with a new bootloader. I just got my phone replaced from ATT and the new one came with 1.95 version while originals were 1.90. There is no HARD-SPL out for 1.95.
The way to do it now is to flash an old original AT&T rom with the 1.90 bootloader (since it's original, it won't require HardSPL). Then go ahead and everything should work as described in this forum/wiki.
Interseting. Sounds like a winner. Next time he comes around I'll try this.
Any idea where I can get a AT&T older rom that has the 1.90 HardSLP on it? I am having the same issue with the Error 262 update error.
Thanks
smicale said:
Any idea where I can get a AT&T older rom that has the 1.90 HardSLP on it? I am having the same issue with the Error 262 update error.
Thanks
Click to expand...
Click to collapse
You should probably go to your ATT store and tell them you'd like to get the official Hard SPL update.
I am really struggling with this. Do I have to the FLASH HardSPL or can I just go straight to the flashing my preferred ROM. I can not get get the FLASH HardSPL to work because of this Error 262. Please someone tell me where I am going wrong with this!!!! I am bout to pull my last hair out!
smicale said:
I am really struggling with this. Do I have to the FLASH HardSPL or can I just go straight to the flashing my preferred ROM. I can not get get the FLASH HardSPL to work because of this Error 262. Please someone tell me where I am going wrong with this!!!! I am bout to pull my last hair out!
Click to expand...
Click to collapse
If u want to use not the official rom made for ur provider and phone, hardspl is the only way. Any custom rom needs hardspl. Otherwise ur phone will not accept the rom.
But look here http://forum.xda-developers.com/showthread.php?t=410150
and flash the stock 1.90 SPL first, then u are ready for hardspl.
Description how to do stock spl is in this thread. Its normally meant for going back to stock for repair, but it should also solve ur issue.
NOT SHURE BECAUSE IN THE CDMA SECTION, IS UR PHONE CDMA OR GSM. MY SOLUTIUON IS FOR GSM !!!!!!
U SHOULD CHANGE THE POSTING SECTION IF ITS GSM !!!!!
Try doing the HardSPL in a Windows XP machine (needs .NET Framework 2.0 and ActiveSync). Goodluck.
i had the same problem as you and i maybe have a solution for you
go to your usb settings and look if you have a check box saying something about advanced networking. if it is indeed checked uncheck it and your problem will be gone hopefully
i did it on my telus touch pro and i am now able to upgrade my phone to winmo 6.5
Hey all,
Got my HD2 not too long ago after the first one I got was DOA(it wouldn't hold calls).
Anyway I just want to ask for some advice. I'm with Optus prepaid. Ive managed to setup my phone to send MMS and they are properly sending and receiving. The problem is, I cant use the internet. It wont connect. Anyone here got this working with optus?
Secondly, when I put the phone on loudspeaker, the screen wont turn off. The lock button is the hang up button so I cant just hit that. Is it possible to switch the screen off when in loudspeaker?
Will installing a cooked ROM unlock the extra RAM thats in the phone?
My phone software versions are as follows:
OS Version 5.2.21869 (21869.5.0.82)
Manila Version 2.5.20121431.1
ROM Version 1.72.841.0(82124) WWE
Radio Version 2.04.51.22_2
If I want to change the ROM, can anyone suggest something which looks close to the original but has better performance(speed, battery wise) and does not have stability issues? I really want to ensure I do everything right and not brick my phone. I read something about installing wrong radios can brick the phone.
Does anyone know where I can dl this version of the Telstra ROM? Ive got the 1.49 one.
Currently wanting to install this. Energy.Leo.23673.Sense2.5.Cookie.DinikGlass.Jul.24
Would this ROM give any issues with my phone? Is it just a matter of install and away I go or will I be required to punch in a whole bunch of settings.
This is a messy post but any info would help greatly.
Thanks guys!
SargeRX8 said:
Hey all,
Got my HD2 not too long ago after the first one I got was DOA(it wouldn't hold calls).
Anyway I just want to ask for some advice. I'm with Optus prepaid. Ive managed to setup my phone to send MMS and they are properly sending and receiving. The problem is, I cant use the internet. It wont connect. Anyone here got this working with optus?
Click to expand...
Click to collapse
once you flash a custom rom, chances are it will contain teh standard connectionsetup which will find teh correct settings anyway.
Secondly, when I put the phone on loudspeaker, the screen wont turn off. The lock button is the hang up button so I cant just hit that. Is it possible to switch the screen off when in loudspeaker?
Click to expand...
Click to collapse
try doublefinger tapping (two fingers, single tap, turns off, then i use home key to bring screen back on) on the callers image, this works for some roms, probably more likely to work once you change roms.
Will installing a cooked ROM unlock the extra RAM thats in the phone?
Click to expand...
Click to collapse
yes, assuming the rom is based on a tmous core, and you flash a matching radio.(which the rom would require anyway, its a two part process, a 576 enabled rom and a x.xx.50.x radio)
I read something about installing wrong radios can brick the phone.
Click to expand...
Click to collapse
not your phone, tmous (t mobile US) phones only need to worry about that.
Does anyone know where I can dl this version of the Telstra ROM? Ive got the 1.49 one.
Click to expand...
Click to collapse
google knows, dozens of posts on here know
Alright I got my hands on the same rom Ive got on my phone incase I break anything.
I just need a 1.42.000 spl thingy. Which rom do I need?
not sure what you mean, , , the rom you just found will include 1.42.0000
spl is part of all official roms, its not something you can download on its own. Only in official roms, or by using hspl.
Hi folks! Please help me! I killed tons of nerves because of this phone!
So here is my sad story. 1 Year ago i bought second hand HTC HD2. Seller told me that phone is locked to T-mobile(Not US one!! UK one!! Transaction was held in UK). After I got phone I rushed home to install Android and I was successful at this point. Then I bought a unlock code from ebay, so I Finally could make phone calls. Then I realized that the only way I can insert code is putting back WM 6.5. And here the worst part starts. I read hundreds of manuals but still was unsuccessful. I downloaded many official WM 6.5 ROM installers but they didn't flash my phone. They just got stuck at 0% and error pops up. I was trying it for a week and then I just raged and put phone to the shelf and was waiting til I get will power to start over again.
I hear that every phone needs its own ROM installer for particular region and operator but I couldn't find UK T-mobile ROM so used many others and it didn't help.
I also heard that by IMEI it is possible to find to what operator the phone is locked(just to check if seller didn't lie me) but again I didn't manage to do so.
Here is my IMEI 354120035834066
Please experts help me, little nooby, with this horrible situation.
thank you
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
samsamuel said:
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
Click to expand...
Click to collapse
Thank you, but always when I am trying yo install HSPL4 critical error comes up. I think it comes up because I have spl 2.1000000 which should be 2.08 I found information that in order to downgrade to 2.08 I need to flash official ROM. But when I am trying to do so it is always stuck on 0%...
I am so $%^& up ...
any ideas?.... thx
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Mister B said:
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Click to expand...
Click to collapse
Hi. Thanks for ROM, but still.. got stuck on 0% and doesn't go further..
When I try to install HSPL4 it always gives me critical error...
Fixed my problem. Now everything works fine!! Thank you very much guys!!
how ??
rom4eg said:
Fixed my problem. Now everything works fine!! Thank you very much guys!!
Click to expand...
Click to collapse
explain