How do you change the image it shows while USB is connected? I just want that android holding the harddrive as my USB connected image but I don't know where the file is or how to change that. Any help would be appreciated.
I can reinstall the ROM easily if I need to do it before I install it.
Related
Phone:
Tmobile T959 aka Samsung Vibrant
It is on stock Froyo 2.2
It has the 3E recovery.
I tried on 2 computers but I can NOT connect via USB it gives me USB malfunction error. The phone does charge. I can put it into download mode vie the 3 finger trick. When you connect it does give you the option to click the green Android icon Connect to USB. So it is talking to the computer, the usb is not totally dead.
Problem:
I need to root this phone. I can not use 1 click or anything else because I think there is a problem with the USB port. I can get files onto the phone via wifi or using the external sd card.
I tried using the update.zip file BUT because I am on the 3E recovery it will say signature failed. I can not run the install.bat to get it back to 2E recovery. I can not use ODIN because the Windows will not detect the phone properly.
What workaround can I use to root this phone? How would I use terminal on the phone?
HOW WOULD YOU ROOT THE PHONE IF YOUR USB PORT WAS "broken"?
THANKS for helping!
original thread
http://forum.xda-developers.com/showthread.php?p=36834621&posted=1#post36834621
anyone ?
Does anyone have the signed 3e or 2e update.zip file that I can load from the sdcard?
thx
Could be a faulty usb flex. You can't be thinking of rooting & flashing with that USB. Too risky.
Tried with another USB cable? Another USB socket? Another PC?
If you tried to all the above and still don't flies, you should be thinking usb flex swap.
Hello everybody,
I have a problem with my Samsung i5500. Every time i try to connect it to a PC it is not detected as a mass memory device and gos straight into charging mode just like i would connect the phone to the socket charger. The PC does not recognize the phone, it doesn't do anything, just like i never connected the phone through the USB port, but the phone is charging.
I tried to connect the phone on 3 different computers using 3 different micro-usb cables. On all 3 computers I installed the latest drivers for the i5500 and the same problem occurs every time.
Can anyone please help me with an advice. What should I do in order to get my phone connected and recognized by the PC?
In case you it helps you to know, I am using the stock 2.2 ROM and the phone is not rooted.
Thank you in advance.
i have EXACTLY the same problem, and it is not drivers problem. Any advice?
hey guys, This is the link to download for drivers.
http://d-h.st/iPk
If you use windows 8 or 8.1 then you will have to extract the file you download from the link above and then right click on the .exe file and go to 'properties', in that go to 'compatibility' and in that choose your operating system as "WINDOWS 7" and check the option below 'always run as administrator' and there you go. Double click on .exe file and follow steps. Install drivers. No need to restart the pc also. (if your phone also do not detect after installing these drivers only then restart).
Can you just try this out? I know it is maybe not driver problem but still you can try this.
Hi help me. :crying:
I have installed CM9 stable. My phone is work only with charger. I am sure that's not problem with USB port, because only usb mode works if i go in options -> storage -> usb connection if i change from mass storage to MTP or PTP several times when in phone appears on the notification bar information about connection. It is temporary fix until i reconnect it. I also tried in CWM recovery and nothing happens likewise fastboot or flashmode and it is the same, only led is lightening. Nothing help like restoring backup from recovery. It can be caused by OTG USB modules ? How can i back to stock rom ? (I tried PC Companion and SEUS). I think something is wrong with usb modules in the phone (not Windows or PC, etc.). It is a option to flash kernel or rom without using PC? What can i do with that ? Please help me
Install all drivers for all devices/modes from flashtool (installation folder) -> drivers. Then try again
Otherwise reinstall or update PC Companion or Sony Update Service, they install some drivers, too. Or you try another PC :good:
I'm sorry but it's impossible to flash a kernel without your PC...
Sent from my Nexus 7 running Android 4.2.2
Ok, thanks for the advice. I am gonna try this, but how i should install drivers if nothing appears in the device manager in PC. Only what i see it is a called like „sony sa0102 adb interface" and only if i switching between usb modes in phone settings. Maybe the issue is in the phone like i write earlier about this. The smartphone dont detect usb cable present or he doesnt switching a driver for the connecting. Thanks again for the reply.
Sure its not the problem of the cable?
Don't forget to hit thanks
It can't be problem with cable because very rarely works in while when i changing usb modes in settings phone. But, thanks i will try on another cable. My kernel is from CM9 stable in zip file, but on this kernel only will work CM9 or nothing else like ROMs based on the cyanogenmod for example CM10 or AOKP ? I, one day connect usb otg (host) cable to phone and charger. This cable had 2 inputs male but also i have converter usb (female-female). And only work mouse and the keyboard (without usb flash disks, drives, etc.). I would be grateful for the answer my question. Thanks.
When I tried to connect my rezound to my desktop PC the PC tells me the usb device is not recognized. It used to work where I can connect to my PC and look through files on my rezound, but it hasn't been working for a while. Does anyone know what the issue is? I tried enabling usb debugging and tried installing HTC sync and used some of the settings in "connect to my PC" section of the settings, but it still doesn't work. What I want to do is backup some files and eventually root and flash for the first time. I currently have an S5, but I want to root and flash on my Rezound. Thanks for any help.
Update: I got it work. I think it may have been a cable or port that wasn't working right as I used a different cable and usb port on my PC
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
TheOneIsBack said:
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
Click to expand...
Click to collapse
Hi, You Might Have To Try And Figure Out Mask rom Mode To Force your Device To Be Detected By USB Burn Tool If Using The Reset Button is Unsuccessful, Look For Mask rom Mode Information, You Can Upload Pictures Of Both Sides Of Your Logic Board we can try and figure it out
aidanmacgregor said:
Hi, You Might Have To Try And Figure Out Mask rom Mode To Force your Device To Be Detected By USB Burn Tool If Using The Reset Button is Unsuccessful, Look For Mask rom Mode Information, You Can Upload Pictures Of Both Sides Of Your Logic Board we can try and figure it out
Click to expand...
Click to collapse
Hey man,
Thanks for taking the time to reply.
I managed to get it working. Decided to give it another shot this morning and for some reason, first time around it worked. USB Burning Tool instantly picked the box up, installed perfectly and now I have it up and running!! It definitely seems a lot more snappier than my last firmware.
I do have a question though. With the previous stock firmware, my TV would pick the Android box up with a HDR signal. It no longer does this now. Is that to be expected with this rom or is there something I need to do?
Sir
TheOneIsBack said:
Hi all,
I'm in a complete head spin so I'm hoping someone here could shed some light on an issue I'm facing.
As the title says, I currently have a Buzz TV XPL 3000 android box. I'm trying to flash "Aidan's Android TV Custom Rom" onto it. But no matter what I try to do, I simply cannot get the Buzz TV box to interact with my Windows 10 PC.
I have 2 different male-to-male USB cables that I've tried plugging into the box and into my PC, but there is no link between them. The PC nor the Android box don't acknowledge any kind of connection. I know a lot of people will probably say that my cables aren't data cables, but I've actually used one of them previously to flash another Android device.
Whenever I plug the USB cables into my Android box and PC, the ONLY thing that happens, is the PC powers up the Android box. I've tried turning on USB debugging tools from the developer menu, but nothing. The PC doesn't even make a sound when I plug the cable in and there is nothing listed under device manager. Nothing appears on USB Burning Tools under devices.. Just nothing.
I've tried plugging in the USB cable, while holding down the reset button (located on the bottom of the box), but all that does is power on the Android box and load into "Android Recover". Still nothing detected on USB Burning Tools and still no acknowledgement from the PC that a USB device has been connected.
The options I get in the Android Recovery menu are:
Reboot System Now
Apply Update From EXT
Apply Update From Data
Wipe Data/Factory Reset
Wipe Cache Partition
Burn Keys
I've tried selecting "Apply Update From EXT" and manually selecting the .img file. But it says it cannot verify the signature.
I'm literally out of ideas. Can anyone who knows what they're doing please help me!
Click to expand...
Click to collapse
i just bought this buzz tv box. can you guide me ? Like how to root? Which is the best rom? Best apps ? Adaway etc?